Construction and Building Materials - July 2017

Published:	July 2017

Articles in this Issue

Author(s)	Title	Page(s)
Ma, Gao / Li, Hui	Acoustic emission monitoring and damage assessment of FRP-strengthened reinforced concrete columns under cyclic loading	86-98
Velay-Lizancos, Mirian / Pérez-Ordóñez, Juan Luis / Martínez-Lage, Isabel / Vazquez-Burgo, Pablo	Analytical and genetic programming model of compressive strength of eco concretes by NDT according to curing temperature	195-206
Luso, Eduarda / Lourenço, Paulo B.	Bond strength characterization of commercially available grouts for masonry	317-326
Wang, Chengwen / Chen, Xin / Wei, Xiaotong / Wang, Ruihe	Can nanosilica sol prevent oil well cement from strength retrogression under high temperature?	574-585
Ye, Hailong / Radlińska, Aleksandra	Carbonation-induced volume change in alkali-activated slag	635-644
Inocente Domingos, Matheus David / Faxina, Adalberto Leandro / Bernucci, Liedi Légi Bariani	Characterization of the rutting potential of modified asphalt binders and its correlation with the mixture's rut resistance	207-213
Wang, Yu-Hang / Tang, Qi / Nie, Xin	Comparative investigation on influences of concrete material constitutive models on structural behavior	475-483
Liu, Quantao / Yu, Wan / Wu, Shaopeng / Schlangen, Erik / Pan, Pan	A comparative study of the induction healing behaviors of hot and warm mix asphalt	663-670
Song, Byeong-Deok / Park, Bong-Geun / Choi, Yongkyu / Kim, Tae-Hyung	Determining the engineering characteristics of the Hi-FA series of grout materials in an underwater condition	74-85
Savvilotidou, M. / Vassilopoulos, A. P. / Frigione, M. / Keller, T.	Development of physical and mechanical properties of a cold-curing structural adhesive in a wet bridge environment	115-124
Ong, Peng Pheng / Adnan, A. / Kwok, K. C. S. / Ma, Chau-Khun / Tiong, P. L. Y. / Pesaran Behbahani, Hamid	Dynamic simulation of unrestrained interlocking Tuned Liquid Damper blocks	586-597
Tan, Hongbo / Zou, Fubing / Ma, Baoguo / Guo, Yulin / Li, Xiangguo / Mei, Junpeng	Effect of competitive adsorption between sodium gluconate and polycarboxylate superplasticizer on rheology of cement paste	338-346
Yu, Zhuqing / Ma, Jian / Ye, Guang / Van Breugel, Klaas / Shen, Xiaodong	Effect of fly ash on the pore structure of cement paste under a curing period of 3 years	493-501
Lv, Shanshan / Liu, Xiaojing / Gu, Jiyou / Jiang, Yang / Tan, Haiyan / Zhang, Yanhua	Effect of glycerol introduced into PLA based composites on the UV weathering behavior	525-531
Lu, Song / Xu, Jin-yu / Bai, Er-lei / Luo, Xin	Effect of particles with different mechanical properties on the energy dissipation properties of concrete	502-515
Moraes, J. C. B. / Tashima, M. M. / Akasaki, J. L. / Melges, J. L. P. / Monzó, J. / Borrachero, M. V. / Soriano, L. / Payá, J.	Effect of sugar cane straw ash (SCSA) as solid precursor and the alkaline activator composition on alkali-activated binders based on blast furnace slag (BFS)	214-224
Hoy, Menglim / Rachan, Runglawan / Horpibulsuk, Suksun / Arulrajah, Arul / Mirzababaei, Mehdi	Effect of wetting–drying cycles on compressive strength and microstructure of recycled asphalt pavement – Fly ash geopolymer	624-634
Yalçınkaya, Çağlar / Yazıcı, Halit	Effects of ambient temperature and relative humidity on early-age shrinkage of UHPC with high-volume mineral admixtures	252-259
Ling, Hao / Qian, Chunxiang	Effects of self-healing cracks in bacterial concrete on the transmission of chloride during electromigration	406-411
Puthipad, Nipat / Ouchi, Masahiro / Rath, Sovannsathya / Attachaiyawuth, Anuwat	Enhanced entrainment of fine air bubbles in self-compacting concrete with high volume of fly ash using defoaming agent for improved entrained air stability and higher aggregate content	1-12
Wang, Liang / Wang, Jialai / Qian, Xin / Chen, Peiyuan / Xu, Ying / Guo, Jinxing	An environmentally friendly method to improve the quality of recycled concrete aggregates	432-441
Wang, Yi / Gong, Fuyuan / Zhang, Dawei / Ueda, Tamon	Estimation of ice formation in mortar saturated with sodium chloride solutions	238-251
Park, Dae-Wook / Seo, Woo-Jin / Kim, Jun / Vo, Hai Viet	Evaluation of moisture susceptibility of asphalt mixture using liquid anti-stripping agents	399-405
Galán-Arboledas, R. J. / Cotes-Palomino, M. T. / Bueno, S. / Martínez-García, C.	Evaluation of spent diatomite incorporation in clay based materials for lightweight bricks processing	327-337
Yousuf, Farqad / Wei, Xiaosheng / Tao, Jiayin	Evaluation of the influence of a superplasticizer on the hydration of varying composition cements by the electrical resistivity measurement method	25-34
Hassan, Mostafa / Wille, Kay	Experimental impact analysis on ultra-high performance concrete (UHPC) for achieving stress equilibrium (SE) and constant strain rate (CSR) in Split Hopkinson pressure bar (SHPB) using pulse shaping technique	747-757
Hadi, Muhammad N. S. / Yuan, Jian Song	Experimental investigation of composite beams reinforced with GFRP I-beam and steel bars	462-474
Benli, Ahmet / Karatas, Mehmet / Bakir, Yakup	An experimental study of different curing regimes on the mechanical properties and sorptivity of self-compacting mortars with fly ash and silica fume	552-562
Alkaysi, Mo / El-Tawil, Sherif	Factors affecting bond development between Ultra High Performance Concrete (UHPC) and steel bar reinforcement	412-422
Guo, Zi-Xiong / Wang, Lan / Chai, Zhen-Ling / Ye, Yong / Shahrooz, Bahram M.	Flexural behavior of stone slabs strengthened with reinforced mortar	158-167
Samson, Gabriel / Cyr, Martin / Gao, Xiao Xiao	Formulation and characterization of blended alkali-activated materials based on flash-calcined metakaolin, fly ash and GGBS	50-64
Kannan, Dima M. / Aboubakr, Sherif H. / El-Dieb, Amr S. / Reda Taha, Mahmoud M.	High performance concrete incorporating ceramic waste powder as large partial replacement of Portland cement	35-41
Zhang, Ran / Wang, Hainian / Gao, Junfeng / You, Zhanping / Yang, Xu	High temperature performance of SBS modified bio-asphalt	99-105
Wu, Chengyou / Chen, Wenhai / Zhang, Huifang / Yu, Hongfa / Zhang, Wuyu / Jiang, Ningshan / Liu, Lianxin	The hydration mechanism and performance of Modified magnesium oxysulfate cement by tartaric acid	516-524
Jeevanagoudar, Yashavant V. / Krishna, R. Hari / Gowda, Raje / Preetham, R. / Prabhakara, R.	Improved mechanical properties and piezoresistive sensitivity evaluation of MWCNTs reinforced cement mortars	188-194
Wang, Rui / Gao, Xiaojian / Huang, Huanghuang / Han, Guangshuai	Influence of rheological properties of cement mortar on steel fiber distribution in UHPC	65-73
Sharmin, Afia / Alengaram, U. Johnson / Jumaat, Mohd Zamin / Yusuf, Moruf Olalekan / Kabir, S. M. Alamgir / Bashar, Iftekhair Ibnul	Influence of source materials and the role of oxide composition on the performance of ternary blended sustainable geopolymer mortar	608-623
Jiang, Peng / Jiang, Linhua / Zha, Jie / Song, Zijian	Influence of temperature history on chloride diffusion in high volume fly ash concrete	677-685
Zhang, Zengqi / Wang, Qiang / Chen, Honghui / Zhou, Yuqi	Influence of the initial moist curing time on the sulfate attack resistance of concretes with different binders	541-551
Zhutovsky, Semion / Kovler, Konstantin	Influence of water to cement ratio on the efficiency of internal curing of high-performance concrete	311-316
Yang, Kai / Zhong, Mingquan / Magee, Bryan / Yang, Changhui / Wang, Chong / Zhu, Xiaohong / Zhang, Zhilu	Investigation of effects of Portland cement fineness and alkali content on concrete plastic shrinkage cracking	279-290
Chen, Binmeng / Li, Bo / Gao, Yan / Ling, Tung-Chai / Lu, Zeyu / Li, Zongjin	Investigation on electrically conductive aggregates produced by incorporating carbon fiber and carbon black	106-114
Luo, Weihua / Zhang, Yihan / Cong, Peiliang	Investigation on physical and high temperature rheology properties of asphalt binder adding waste oil and polymers	13-24
Tanzadeh, Javad / Shahrezagamasaei, Reza	Laboratory Assessment of Hybrid Fiber and Nano-silica on Reinforced Porous Asphalt Mixtures	260-270
Luo, Sang / Lu, Qing / Qian, Zhendong / Wang, Hui / Huang, Yueyue	Laboratory investigation and numerical simulation of the rutting performance of double-layer surfacing structure for steel bridge decks	178-187
Pan, Yang / Wu, Chao / Huang, Xin	Long-term durability testing on the MgO-activated slag cured in brine	271-278
Flores Medina, Nelson / Medina, Darío Flores / Hernández-Olivares, F. / Navacerrada, M. A.	Mechanical and thermal properties of concrete incorporating rubber and fibres from tyre recycling	563-573
Ahmadi, Mohsen / Farzin, Saeed / Hassani, Abolfazl / Motamedi, Mana	Mechanical properties of the concrete containing recycled fibers and aggregates	392-398
Guotang, Zhao / Wei, She / Guotao, Yang / Li, Pan / Degou, Cai / Jinyang, Jiang / Hao, Hu	Mechanism of cement on the performance of cement stabilized aggregate for high speed railway roadbed	347-356
Gong, Fuyuan / Ueda, Tamon / Wang, Yi / Zhang, Dawei / Wang, Zhao	Mesoscale simulation of fatigue behavior of concrete materials damaged by freeze-thaw cycles	702-716
Chen, Weichang / Li, Li / Li, Zuixiong / Zhao, Linyi / Shao, Mingshen / Olatayo Afolagboye, Lekan	Modification of traditional Chinese ginger nut and its mechanical behavior	138-146
Shan, Hongyou / Xu, Jinxia / Jiang, Linhua / Wang, Zhuyin	A novel electrochemical technique for enhancing silane penetration depth into mortar	645-649
Onoue, Kozo / Bier, Thomas A.	Optimization of alkali-activated mortar utilizing ground granulated blast-furnace slag and natural pozzolan from Germany with the dynamic approach of the Taguchi method	357-372
Leng, Zhen / Yu, Huayang / Zhang, Zeyu / Tan, Zhifei	Optimizing the mixing procedure of warm asphalt rubber with wax-based additives through mechanism investigation and performance characterization	291-299
Laplaza, A. / Jimenez-Relinque, E. / Campos, J. / Castellote, M.	Photocatalytic behavior of colored mortars containing TiO 2 and iron oxide based pigments	300-310
Shen, Dejian / Wang, Mingliang / Chen, Ying / Wang, Tao / Zhang, Jinyang	Prediction model for relative humidity of early-age internally cured concrete with pre-wetted lightweight aggregates	717-727
Kim, Wan-Ki / Kim, Deuck-Mo / Ryu, Hwa-Sung / Park, Won-Jun / Ham, Sung-Min	Properties of hardener-free epoxy-modified mortars utilizing pyrolysis tar replacement	598-607
Park, Philip / El-Tawil, Sherif / Naaman, Antoine E.	Pull-out behavior of straight steel fibers from asphalt binder	125-137
Javed, Muhammad Faisal / Hafizah, Nor / Memon, Shazim Ali / Jameel, Mohammad / Aslam, Muhammad	Recent research on cold-formed steel beams and columns subjected to elevated temperature: A review	686-701
Pei, Yan / Agostini, Franck / Skoczylas, Frédéric	Rehydration on heat-treated cementitious materials up to 700 °C-coupled transport properties characterization	650-662
Li, Tao / Cheng, Da-li / Avramidis, Stavros / Wålinder, Magnus E. P. / Zhou, Ding-guo	Response of hygroscopicity to heat treatment and its relation to durability of thermally modified wood	671-676
Liu, Lingqing / Xiao, Feipeng / Zhang, Henglong / Amirkhanian, Serji	Rheological characteristics of alternative modified binders	442-450
Hasni, Hassene / Alavi, Amir H. / Chatti, Karim / Lajnef, Nizar	A self-powered surface sensing approach for detection of bottom-up cracking in asphalt concrete pavements: Theoretical/numerical modeling	728-746
Al-Fadala, S. / Chakkamalayath, J. / Al-Bahar, S. / Al-Aibani, A. / Ahmed, S.	Significance of performance based specifications in the qualification and characterization of blended cement using volcanic ash	532-540
Diab, Aboelkasim / You, Zhanping	Small and large strain rheological characterizations of polymer- and crumb rubber-modified asphalt binders	168-177
Ho, Chun-Ling / Huang, Wen-Ling / Wang, Her-Yung	Study of the volume stability of slag cement mortar applied to desulfurization slag during high temperature operation	147-157
Secrieru, Egor / Fataei, Shirin / Schröfl, Christof / Mechtcherine, Viktor	Study on concrete pumpability combining different laboratory tools and linkage to rheology	451-461
Khedmati, M. / Khodaii, A. / Haghshenas, H. F.	A study on moisture susceptibility of stone matrix warm mix asphalt	42-49
Wang, Baomin / Li, Gaonian / Han, Junnan / Zheng, Yue / Liu, Hui / Song, Wanzeng	Study on the properties of artificial flood-prevention stone made by Yellow River silt	484-492
Husni, H. / Nazari, M. R. / Yee, H. M. / Rohim, R. / Yusuff, A. / Mohd Ariff, Mohd Azahar / Ahmad, N. N. R. / Leo, C. P. / Junaidi, M. U. M.	Superhydrophobic rice husk ash coating on concrete	385-391
Zhang, Dongmei / Zhang, Henglong / Zhu, Chongzheng / Shi, Caijun	Synergetic effect of multi-dimensional nanomaterials for anti-aging properties of SBS modified bitumen	423-431
Han, Qinghua / Wang, Lichen / Xu, Jie	Test and numerical simulation of large angle wedge type of anchorage using transverse enhanced CFRP tendons for beam string structure	225-237
Hanif, Asad / Lu, Zeyu / Li, Zongjin	Utilization of fly ash cenosphere as lightweight filler in cement-based composites – A review	373-384

About this
data sheet
IssueID
22629
Published on:
14/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - July 2017

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - July 2017

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.