Construction and Building Materials - juillet 2017

Publié:	juillet 2017

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Ma, Gao / Li, Hui	Acoustic emission monitoring and damage assessment of FRP-strengthened reinforced concrete columns under cyclic loading	86-98
Velay-Lizancos, Mirian / Pérez-Ordóñez, Juan Luis / Martínez-Lage, Isabel / Vazquez-Burgo, Pablo	Analytical and genetic programming model of compressive strength of eco concretes by NDT according to curing temperature	195-206
Luso, Eduarda / Lourenço, Paulo B.	Bond strength characterization of commercially available grouts for masonry	317-326
Wang, Chengwen / Chen, Xin / Wei, Xiaotong / Wang, Ruihe	Can nanosilica sol prevent oil well cement from strength retrogression under high temperature?	574-585
Ye, Hailong / Radlińska, Aleksandra	Carbonation-induced volume change in alkali-activated slag	635-644
Inocente Domingos, Matheus David / Faxina, Adalberto Leandro / Bernucci, Liedi Légi Bariani	Characterization of the rutting potential of modified asphalt binders and its correlation with the mixture's rut resistance	207-213
Wang, Yu-Hang / Tang, Qi / Nie, Xin	Comparative investigation on influences of concrete material constitutive models on structural behavior	475-483
Liu, Quantao / Yu, Wan / Wu, Shaopeng / Schlangen, Erik / Pan, Pan	A comparative study of the induction healing behaviors of hot and warm mix asphalt	663-670
Song, Byeong-Deok / Park, Bong-Geun / Choi, Yongkyu / Kim, Tae-Hyung	Determining the engineering characteristics of the Hi-FA series of grout materials in an underwater condition	74-85
Savvilotidou, M. / Vassilopoulos, A. P. / Frigione, M. / Keller, T.	Development of physical and mechanical properties of a cold-curing structural adhesive in a wet bridge environment	115-124
Ong, Peng Pheng / Adnan, A. / Kwok, K. C. S. / Ma, Chau-Khun / Tiong, P. L. Y. / Pesaran Behbahani, Hamid	Dynamic simulation of unrestrained interlocking Tuned Liquid Damper blocks	586-597
Tan, Hongbo / Zou, Fubing / Ma, Baoguo / Guo, Yulin / Li, Xiangguo / Mei, Junpeng	Effect of competitive adsorption between sodium gluconate and polycarboxylate superplasticizer on rheology of cement paste	338-346
Yu, Zhuqing / Ma, Jian / Ye, Guang / Van Breugel, Klaas / Shen, Xiaodong	Effect of fly ash on the pore structure of cement paste under a curing period of 3 years	493-501
Lv, Shanshan / Liu, Xiaojing / Gu, Jiyou / Jiang, Yang / Tan, Haiyan / Zhang, Yanhua	Effect of glycerol introduced into PLA based composites on the UV weathering behavior	525-531
Lu, Song / Xu, Jin-yu / Bai, Er-lei / Luo, Xin	Effect of particles with different mechanical properties on the energy dissipation properties of concrete	502-515
Moraes, J. C. B. / Tashima, M. M. / Akasaki, J. L. / Melges, J. L. P. / Monzó, J. / Borrachero, M. V. / Soriano, L. / Payá, J.	Effect of sugar cane straw ash (SCSA) as solid precursor and the alkaline activator composition on alkali-activated binders based on blast furnace slag (BFS)	214-224
Hoy, Menglim / Rachan, Runglawan / Horpibulsuk, Suksun / Arulrajah, Arul / Mirzababaei, Mehdi	Effect of wetting–drying cycles on compressive strength and microstructure of recycled asphalt pavement – Fly ash geopolymer	624-634
Yalçınkaya, Çağlar / Yazıcı, Halit	Effects of ambient temperature and relative humidity on early-age shrinkage of UHPC with high-volume mineral admixtures	252-259
Ling, Hao / Qian, Chunxiang	Effects of self-healing cracks in bacterial concrete on the transmission of chloride during electromigration	406-411
Puthipad, Nipat / Ouchi, Masahiro / Rath, Sovannsathya / Attachaiyawuth, Anuwat	Enhanced entrainment of fine air bubbles in self-compacting concrete with high volume of fly ash using defoaming agent for improved entrained air stability and higher aggregate content	1-12
Wang, Liang / Wang, Jialai / Qian, Xin / Chen, Peiyuan / Xu, Ying / Guo, Jinxing	An environmentally friendly method to improve the quality of recycled concrete aggregates	432-441
Wang, Yi / Gong, Fuyuan / Zhang, Dawei / Ueda, Tamon	Estimation of ice formation in mortar saturated with sodium chloride solutions	238-251
Park, Dae-Wook / Seo, Woo-Jin / Kim, Jun / Vo, Hai Viet	Evaluation of moisture susceptibility of asphalt mixture using liquid anti-stripping agents	399-405
Galán-Arboledas, R. J. / Cotes-Palomino, M. T. / Bueno, S. / Martínez-García, C.	Evaluation of spent diatomite incorporation in clay based materials for lightweight bricks processing	327-337
Yousuf, Farqad / Wei, Xiaosheng / Tao, Jiayin	Evaluation of the influence of a superplasticizer on the hydration of varying composition cements by the electrical resistivity measurement method	25-34
Hassan, Mostafa / Wille, Kay	Experimental impact analysis on ultra-high performance concrete (UHPC) for achieving stress equilibrium (SE) and constant strain rate (CSR) in Split Hopkinson pressure bar (SHPB) using pulse shaping technique	747-757
Hadi, Muhammad N. S. / Yuan, Jian Song	Experimental investigation of composite beams reinforced with GFRP I-beam and steel bars	462-474
Benli, Ahmet / Karatas, Mehmet / Bakir, Yakup	An experimental study of different curing regimes on the mechanical properties and sorptivity of self-compacting mortars with fly ash and silica fume	552-562
Alkaysi, Mo / El-Tawil, Sherif	Factors affecting bond development between Ultra High Performance Concrete (UHPC) and steel bar reinforcement	412-422
Guo, Zi-Xiong / Wang, Lan / Chai, Zhen-Ling / Ye, Yong / Shahrooz, Bahram M.	Flexural behavior of stone slabs strengthened with reinforced mortar	158-167
Samson, Gabriel / Cyr, Martin / Gao, Xiao Xiao	Formulation and characterization of blended alkali-activated materials based on flash-calcined metakaolin, fly ash and GGBS	50-64
Kannan, Dima M. / Aboubakr, Sherif H. / El-Dieb, Amr S. / Reda Taha, Mahmoud M.	High performance concrete incorporating ceramic waste powder as large partial replacement of Portland cement	35-41
Zhang, Ran / Wang, Hainian / Gao, Junfeng / You, Zhanping / Yang, Xu	High temperature performance of SBS modified bio-asphalt	99-105
Wu, Chengyou / Chen, Wenhai / Zhang, Huifang / Yu, Hongfa / Zhang, Wuyu / Jiang, Ningshan / Liu, Lianxin	The hydration mechanism and performance of Modified magnesium oxysulfate cement by tartaric acid	516-524
Jeevanagoudar, Yashavant V. / Krishna, R. Hari / Gowda, Raje / Preetham, R. / Prabhakara, R.	Improved mechanical properties and piezoresistive sensitivity evaluation of MWCNTs reinforced cement mortars	188-194
Wang, Rui / Gao, Xiaojian / Huang, Huanghuang / Han, Guangshuai	Influence of rheological properties of cement mortar on steel fiber distribution in UHPC	65-73
Sharmin, Afia / Alengaram, U. Johnson / Jumaat, Mohd Zamin / Yusuf, Moruf Olalekan / Kabir, S. M. Alamgir / Bashar, Iftekhair Ibnul	Influence of source materials and the role of oxide composition on the performance of ternary blended sustainable geopolymer mortar	608-623
Jiang, Peng / Jiang, Linhua / Zha, Jie / Song, Zijian	Influence of temperature history on chloride diffusion in high volume fly ash concrete	677-685
Zhang, Zengqi / Wang, Qiang / Chen, Honghui / Zhou, Yuqi	Influence of the initial moist curing time on the sulfate attack resistance of concretes with different binders	541-551
Zhutovsky, Semion / Kovler, Konstantin	Influence of water to cement ratio on the efficiency of internal curing of high-performance concrete	311-316
Yang, Kai / Zhong, Mingquan / Magee, Bryan / Yang, Changhui / Wang, Chong / Zhu, Xiaohong / Zhang, Zhilu	Investigation of effects of Portland cement fineness and alkali content on concrete plastic shrinkage cracking	279-290
Chen, Binmeng / Li, Bo / Gao, Yan / Ling, Tung-Chai / Lu, Zeyu / Li, Zongjin	Investigation on electrically conductive aggregates produced by incorporating carbon fiber and carbon black	106-114
Luo, Weihua / Zhang, Yihan / Cong, Peiliang	Investigation on physical and high temperature rheology properties of asphalt binder adding waste oil and polymers	13-24
Tanzadeh, Javad / Shahrezagamasaei, Reza	Laboratory Assessment of Hybrid Fiber and Nano-silica on Reinforced Porous Asphalt Mixtures	260-270
Luo, Sang / Lu, Qing / Qian, Zhendong / Wang, Hui / Huang, Yueyue	Laboratory investigation and numerical simulation of the rutting performance of double-layer surfacing structure for steel bridge decks	178-187
Pan, Yang / Wu, Chao / Huang, Xin	Long-term durability testing on the MgO-activated slag cured in brine	271-278
Flores Medina, Nelson / Medina, Darío Flores / Hernández-Olivares, F. / Navacerrada, M. A.	Mechanical and thermal properties of concrete incorporating rubber and fibres from tyre recycling	563-573
Ahmadi, Mohsen / Farzin, Saeed / Hassani, Abolfazl / Motamedi, Mana	Mechanical properties of the concrete containing recycled fibers and aggregates	392-398
Guotang, Zhao / Wei, She / Guotao, Yang / Li, Pan / Degou, Cai / Jinyang, Jiang / Hao, Hu	Mechanism of cement on the performance of cement stabilized aggregate for high speed railway roadbed	347-356
Gong, Fuyuan / Ueda, Tamon / Wang, Yi / Zhang, Dawei / Wang, Zhao	Mesoscale simulation of fatigue behavior of concrete materials damaged by freeze-thaw cycles	702-716
Chen, Weichang / Li, Li / Li, Zuixiong / Zhao, Linyi / Shao, Mingshen / Olatayo Afolagboye, Lekan	Modification of traditional Chinese ginger nut and its mechanical behavior	138-146
Shan, Hongyou / Xu, Jinxia / Jiang, Linhua / Wang, Zhuyin	A novel electrochemical technique for enhancing silane penetration depth into mortar	645-649
Onoue, Kozo / Bier, Thomas A.	Optimization of alkali-activated mortar utilizing ground granulated blast-furnace slag and natural pozzolan from Germany with the dynamic approach of the Taguchi method	357-372
Leng, Zhen / Yu, Huayang / Zhang, Zeyu / Tan, Zhifei	Optimizing the mixing procedure of warm asphalt rubber with wax-based additives through mechanism investigation and performance characterization	291-299
Laplaza, A. / Jimenez-Relinque, E. / Campos, J. / Castellote, M.	Photocatalytic behavior of colored mortars containing TiO 2 and iron oxide based pigments	300-310
Shen, Dejian / Wang, Mingliang / Chen, Ying / Wang, Tao / Zhang, Jinyang	Prediction model for relative humidity of early-age internally cured concrete with pre-wetted lightweight aggregates	717-727
Kim, Wan-Ki / Kim, Deuck-Mo / Ryu, Hwa-Sung / Park, Won-Jun / Ham, Sung-Min	Properties of hardener-free epoxy-modified mortars utilizing pyrolysis tar replacement	598-607
Park, Philip / El-Tawil, Sherif / Naaman, Antoine E.	Pull-out behavior of straight steel fibers from asphalt binder	125-137
Javed, Muhammad Faisal / Hafizah, Nor / Memon, Shazim Ali / Jameel, Mohammad / Aslam, Muhammad	Recent research on cold-formed steel beams and columns subjected to elevated temperature: A review	686-701
Pei, Yan / Agostini, Franck / Skoczylas, Frédéric	Rehydration on heat-treated cementitious materials up to 700 °C-coupled transport properties characterization	650-662
Li, Tao / Cheng, Da-li / Avramidis, Stavros / Wålinder, Magnus E. P. / Zhou, Ding-guo	Response of hygroscopicity to heat treatment and its relation to durability of thermally modified wood	671-676
Liu, Lingqing / Xiao, Feipeng / Zhang, Henglong / Amirkhanian, Serji	Rheological characteristics of alternative modified binders	442-450
Hasni, Hassene / Alavi, Amir H. / Chatti, Karim / Lajnef, Nizar	A self-powered surface sensing approach for detection of bottom-up cracking in asphalt concrete pavements: Theoretical/numerical modeling	728-746
Al-Fadala, S. / Chakkamalayath, J. / Al-Bahar, S. / Al-Aibani, A. / Ahmed, S.	Significance of performance based specifications in the qualification and characterization of blended cement using volcanic ash	532-540
Diab, Aboelkasim / You, Zhanping	Small and large strain rheological characterizations of polymer- and crumb rubber-modified asphalt binders	168-177
Ho, Chun-Ling / Huang, Wen-Ling / Wang, Her-Yung	Study of the volume stability of slag cement mortar applied to desulfurization slag during high temperature operation	147-157
Secrieru, Egor / Fataei, Shirin / Schröfl, Christof / Mechtcherine, Viktor	Study on concrete pumpability combining different laboratory tools and linkage to rheology	451-461
Khedmati, M. / Khodaii, A. / Haghshenas, H. F.	A study on moisture susceptibility of stone matrix warm mix asphalt	42-49
Wang, Baomin / Li, Gaonian / Han, Junnan / Zheng, Yue / Liu, Hui / Song, Wanzeng	Study on the properties of artificial flood-prevention stone made by Yellow River silt	484-492
Husni, H. / Nazari, M. R. / Yee, H. M. / Rohim, R. / Yusuff, A. / Mohd Ariff, Mohd Azahar / Ahmad, N. N. R. / Leo, C. P. / Junaidi, M. U. M.	Superhydrophobic rice husk ash coating on concrete	385-391
Zhang, Dongmei / Zhang, Henglong / Zhu, Chongzheng / Shi, Caijun	Synergetic effect of multi-dimensional nanomaterials for anti-aging properties of SBS modified bitumen	423-431
Han, Qinghua / Wang, Lichen / Xu, Jie	Test and numerical simulation of large angle wedge type of anchorage using transverse enhanced CFRP tendons for beam string structure	225-237
Hanif, Asad / Lu, Zeyu / Li, Zongjin	Utilization of fly ash cenosphere as lightweight filler in cement-based composites – A review	373-384

Informations
sur cette fiche
IssueID
22629
Publié(e) le:
14.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - juillet 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - juillet 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.