Construction and Building Materials - June 2017

Published:	June 2017

Articles in this Issue

Author(s)	Title	Page(s)
Angulo-Ramírez, Daniela Eugenia / Mejía de Gutiérrez, Ruby / Puertas, Francisca	Alkali-activated Portland blast-furnace slag cement: Mechanical properties and hydration	119-128
Abdallah, Sadoon / Fan, Mizi / Cashell, K. A.	Bond-slip behaviour of steel fibres in concrete after exposure to elevated temperatures	542-551
Bai, Yu-Lei / Dai, Jian-Guo / Teng, J. G.	Buckling of steel reinforcing bars in FRP-confined RC columns: An experimental study	403-415
Pedroso, M. / de Brito, J. / Silvestre, J. D.	Characterization of eco-efficient acoustic insulation materials (traditional and innovative)	221-228
Zhang, Jiupeng / Zhu, Cunzhen / Li, Xueqian / Pei, Jianzhong / Chen, Jun	Characterizing the three-stage rutting behavior of asphalt pavement with semi-rigid base by using UMAT in ABAQUS	496-507
Armandei, Mojtaba / Sánchez Filho, Emil de Souza	Correlation between fracture roughness and material strength parameters in SFRCs using 2D image analysis	82-90
Girskas, Giedrius / Nagrockienė, Džigita	Crushed rubber waste impact of concrete basic properties	36-42
Gao, Ying / Geng, Dawei / Huang, Xiaoming / Li, Guoqiang	Degradation evaluation index of asphalt pavement based on mechanical performance of asphalt mixture	75-81
Zhao, Jihui / Wang, Dongmin / Yan, Peiyu	Design and experimental study of a ternary blended cement containing high volume steel slag and blast-furnace slag based on Fuller distribution model	248-256
Hadi, Muhammad N. S. / Farhan, Nabeel A. / Sheikh, M. Neaz	Design of geopolymer concrete with GGBFS at ambient curing condition using Taguchi method	424-431
Tian, Yu / Lee, Jusang / Nantung, Tommy / Haddock, John E.	Development of a mid-depth profile monitoring system for accelerated pavement testing	1-9
Seo, Jung-Woo / Park, Dae-Wook / Le, Tri Ho Minh	Development of an asphalt concrete mixture for Asphalt Core Rockfill Dam	301-309
Angelidi, Myrsini / Vassilopoulos, Anastasios P. / Keller, Thomas	Ductility, recovery and strain rate dependency of an acrylic structural adhesive	184-193
Piasta, Wojciech / Zarzycki, Bartlomiej	The effect of cement paste volume and w/c ratio on shrinkage strain, water absorption and compressive strength of high performance concrete	395-402
Provost-Smith, D. J. / Elsayed, M. / Nehdi, M. L.	Effect of early-age subfreezing temperature on grouted dowel precast concrete wall connections	385-394
Gautam, Bishnu P. / Panesar, Daman K.	The effect of elevated conditioning temperature on the ASR expansion, cracking and properties of reactive Spratt aggregate concrete	310-320
Pan, Pan / Wu, Shaopeng / Hu, Xiaodi / Wang, Peng / Liu, Quantao	Effect of freezing-thawing and ageing on thermal characteristics and mechanical properties of conductive asphalt concrete	239-247
Zhang, Wuman / Chen, Shuhang / Liu, Yingzhou	Effect of weight and drop height of hammer on the flexural impact performance of fiber-reinforced concrete	31-35
Savvilotidou, M. / Vassilopoulos, A. P. / Frigione, M. / Keller, T.	Effects of aging in dry environment on physical and mechanical properties of a cold-curing structural epoxy adhesive for bridge construction	552-561
Cho, Bong Suk / Lee, Hoon Ha / Choi, Young Cheol	Effects of aluminate rich slag on compressive strength, drying shrinkage and microstructure of blast furnace slag cement	293-300
Sun, Jinfeng / Shi, Hu / Qian, Binbin / Xu, Zhiqiang / Li, Weifeng / Shen, Xiaodong	Effects of synthetic C-S-H/PCE nanocomposites on early cement hydration	282-292
de Melo, João Victor Staub / Trichês, Glicério	Evaluation of properties and fatigue life estimation of asphalt mixture modified by organophilic nanoclay	364-373
Yu, Yujie / Wang, Xiaoxiang / Chen, Zhihua	Evaluation on steel cyclic response to strength reducing heat treatment for seismic design application	468-484
Li, Biao / Xu, Lihua / Chi, Yin / Huang, Biao / Li, Changning	Experimental investigation on the stress-strain behavior of steel fiber reinforced concrete subjected to uniaxial cyclic compression	109-118
Zhu, Hong / Faghani, Pedram / Tannert, Thomas	Experimental investigations on timber joints with single glued-in FRP rods	167-172
Alwash, Maitham / Breysse, Denys / Sbartaï, Zoubir Mehdi / Szilágyi, Katalin / Borosnyói, Adorján	Factors affecting the reliability of assessing the concrete strength by rebound hammer and cores	354-363
Elango, K. S. / Revathi, V.	Fal-G Binder Pervious Concrete	91-99
Yeon, Kyu-Seok / Choi, Yoon-Sang / Kim, Kwan-Kyu / Yeon, Jung Heum	Flexural fatigue life analysis of unsaturated polyester-methyl methacrylate polymer concrete	336-343
Ji, Yanliang / Sun, Zhenping / Jiang, Xiaoxing / Liu, Yi / Shui, Liangliang / Chen, Chao	Fractal characterization on pore structure and analysis of fluidity and bleeding of fresh cement paste based on 1H low-field NMR	445-453
Morenon, Pierre / Multon, Stéphane / Sellier, Alain / Grimal, Etienne / Hamon, François / Bourdarot, Eric	Impact of stresses and restraints on ASR expansion	58-74
Katkhuda, Hasan / Shatarat, Nasim	Improving the mechanical properties of recycled concrete aggregate using chopped basalt fibers and acid treatment	328-335
Wang, Y. / Nanukuttan, S. / Bai, Y. / Basheer, P. A. M.	Influence of combined carbonation and chloride ingress regimes on rate of ingress and redistribution of chlorides in concretes	173-183
Huang, Lepeng / Hua, Jianmin / Kang, Ming / Zhang, Aili	Influence of reinforcement configuration on the shrinkage and cracking potential of high-performance concrete	20-30
Isailović, Ivan / Wistuba, Michael P. / Cannone Falchetto, Augusto	Influence of rest period on asphalt recovery considering nonlinearity and self-heating	321-327
Gesoǧlu, Mehmet / Güneyisi, Erhan / Hansu, Osman / Etli, Serkan / Alhassan, Mahammed	Mechanical and fracture characteristics of self-compacting concretes containing different percentage of plastic waste powder	562-569
Shehab El-Din, Hamdy K. / Eisa, Ahmed S. / Abdel Aziz, Baligh H. / Ibrahim, Ahmed	Mechanical performance of high strength concrete made from high volume of Metakaolin and hybrid fibers	203-209
Paiva, H. / Silva, A. S. / Velosa, A. / Cachim, P. / Ferreira, V. M.	Microstructure and hardened state properties on pozzolan-containing concrete	374-384
Woon Choi, Se / Park, Sang Wook / Seon Park, Hyo	Multi-objective design model for retrofit of reinforced concrete frames with infilled walls using FRP bracings	454-467
Page, Jonathan / Khadraoui, Fouzia / Boutouil, Mohamed / Gomina, Moussa	Multi-physical properties of a structural concrete incorporating short flax fibers	344-353
Benzerzour, Mahfoud / Amar, Mouhamadou / Abriak, Nor-Edine	New experimental approach of the reuse of dredged sediments in a cement matrix by physical and heat treatment	432-444
Wiwatrojanagul, Pongsak / Sahamitmongkol, Raktipong / Tangtermsirikul, Somnuk / Khamsemanan, Nirattaya	A new method to determine locations of rebars and estimate cover thickness of RC structures using GPR data	257-273
Balázs, György L. / Czoboly, Olivér / Lublóy, Éva / Kapitány, Kristóf / Barsi, Árpád	Observation of steel fibres in concrete with Computed Tomography	534-541
Kanojia, Apeksha / Jain, Sarvesh K.	Performance of coconut shell as coarse aggregate in concrete	150-156
Gao, Yan-hong / Zhang, Jun-zhi / Zhang, Shan / Zhang, Yu-rong	Probability distribution of convection zone depth of chloride in concrete in a marine tidal environment	485-495
Mohammed, Siline	Processing, effect and reactivity assessment of artificial pozzolans obtained from clays and clay wastes: A review	10-19
Hanif, Asad / Lu, Zeyu / Diao, Su / Zeng, Xiaohui / Li, Zongjin	Properties investigation of fiber reinforced cement-based composites incorporating cenosphere fillers	139-149
Wei, Xuefei / Liu, Xiaoli / Duan, Yunling / Feng, Jinming	Property transformation of a modified sulfoaluminate grouting material under pressure circulation for a water-sealed underground oil cavern	210-220
Benedetto, Andrea / Tosti, Fabio / Bianchini Ciampoli, Luca / Calvi, Alessandro / Brancadoro, Maria Giulia / Alani, Amir M.	Railway ballast condition assessment using ground-penetrating radar – An experimental, numerical simulation and modelling development	508-520
Xing, Chao / Tan, Yiqiu / Liu, Xueyan / Anupam, Kumar / Scarpas, Tom	Research on local deformation property of asphalt mixture using digital image correlation	416-423
Ismail, Mohamed K. / Hassan, Assem A. A.	Shear behaviour of large-scale rubberized concrete beams reinforced with steel fibres	43-57
Praticò, Filippo G. / Fedele, Rosario / Vizzari, Domenico	Significance and reliability of absorption spectra of quiet pavements	274-281
Xiang, Yu / Fang, Zhi / Fang, Yawei	Single and multiple impact behavior of CFRP cables under pretension	521-533
Rahman, Muhammad Ashiqur / Sarker, Prabir Kumar / Shaikh, Faiz Uddin Ahmed / Saha, Ashish Kumer	Soundness and compressive strength of Portland cement blended with ground granulated ferronickel slag	194-202
Zhu, Fei / Zhou, Qiang / Wang, Fenglai / Yang, Xu	Spatial variability and sensitivity analysis on the compressive strength of hollow concrete block masonry wallettes	129-138
Li, L. G. / Huang, Z. H. / Zhu, J. / Kwan, A. K. H. / Chen, H. Y.	Synergistic effects of micro-silica and nano-silica on strength and microstructure of mortar	229-238
Sadouki, Hamid / Denarié, Emmanuel / Brühwiler, Eugen	Validation of a FEA model of structural response of RC-cantilever beams strengthened with a (R-) UHPFRC layer	100-108
Arrigoni, Alessandro / Pelosato, Renato / Dotelli, Giovanni / Beckett, Christopher T. S. / Ciancio, Daniela	Weathering's beneficial effect on waste-stabilised rammed earth: a chemical and microstructural investigation	157-166

About this
data sheet
IssueID
22622
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - June 2017

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - June 2017

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.