Construction and Building Materials - Juni 2017

Erschienen:	Juni 2017

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Angulo-Ramírez, Daniela Eugenia / Mejía de Gutiérrez, Ruby / Puertas, Francisca	Alkali-activated Portland blast-furnace slag cement: Mechanical properties and hydration	119-128
Abdallah, Sadoon / Fan, Mizi / Cashell, K. A.	Bond-slip behaviour of steel fibres in concrete after exposure to elevated temperatures	542-551
Bai, Yu-Lei / Dai, Jian-Guo / Teng, J. G.	Buckling of steel reinforcing bars in FRP-confined RC columns: An experimental study	403-415
Pedroso, M. / de Brito, J. / Silvestre, J. D.	Characterization of eco-efficient acoustic insulation materials (traditional and innovative)	221-228
Zhang, Jiupeng / Zhu, Cunzhen / Li, Xueqian / Pei, Jianzhong / Chen, Jun	Characterizing the three-stage rutting behavior of asphalt pavement with semi-rigid base by using UMAT in ABAQUS	496-507
Armandei, Mojtaba / Sánchez Filho, Emil de Souza	Correlation between fracture roughness and material strength parameters in SFRCs using 2D image analysis	82-90
Girskas, Giedrius / Nagrockienė, Džigita	Crushed rubber waste impact of concrete basic properties	36-42
Gao, Ying / Geng, Dawei / Huang, Xiaoming / Li, Guoqiang	Degradation evaluation index of asphalt pavement based on mechanical performance of asphalt mixture	75-81
Zhao, Jihui / Wang, Dongmin / Yan, Peiyu	Design and experimental study of a ternary blended cement containing high volume steel slag and blast-furnace slag based on Fuller distribution model	248-256
Hadi, Muhammad N. S. / Farhan, Nabeel A. / Sheikh, M. Neaz	Design of geopolymer concrete with GGBFS at ambient curing condition using Taguchi method	424-431
Tian, Yu / Lee, Jusang / Nantung, Tommy / Haddock, John E.	Development of a mid-depth profile monitoring system for accelerated pavement testing	1-9
Seo, Jung-Woo / Park, Dae-Wook / Le, Tri Ho Minh	Development of an asphalt concrete mixture for Asphalt Core Rockfill Dam	301-309
Angelidi, Myrsini / Vassilopoulos, Anastasios P. / Keller, Thomas	Ductility, recovery and strain rate dependency of an acrylic structural adhesive	184-193
Piasta, Wojciech / Zarzycki, Bartlomiej	The effect of cement paste volume and w/c ratio on shrinkage strain, water absorption and compressive strength of high performance concrete	395-402
Provost-Smith, D. J. / Elsayed, M. / Nehdi, M. L.	Effect of early-age subfreezing temperature on grouted dowel precast concrete wall connections	385-394
Gautam, Bishnu P. / Panesar, Daman K.	The effect of elevated conditioning temperature on the ASR expansion, cracking and properties of reactive Spratt aggregate concrete	310-320
Pan, Pan / Wu, Shaopeng / Hu, Xiaodi / Wang, Peng / Liu, Quantao	Effect of freezing-thawing and ageing on thermal characteristics and mechanical properties of conductive asphalt concrete	239-247
Zhang, Wuman / Chen, Shuhang / Liu, Yingzhou	Effect of weight and drop height of hammer on the flexural impact performance of fiber-reinforced concrete	31-35
Savvilotidou, M. / Vassilopoulos, A. P. / Frigione, M. / Keller, T.	Effects of aging in dry environment on physical and mechanical properties of a cold-curing structural epoxy adhesive for bridge construction	552-561
Cho, Bong Suk / Lee, Hoon Ha / Choi, Young Cheol	Effects of aluminate rich slag on compressive strength, drying shrinkage and microstructure of blast furnace slag cement	293-300
Sun, Jinfeng / Shi, Hu / Qian, Binbin / Xu, Zhiqiang / Li, Weifeng / Shen, Xiaodong	Effects of synthetic C-S-H/PCE nanocomposites on early cement hydration	282-292
de Melo, João Victor Staub / Trichês, Glicério	Evaluation of properties and fatigue life estimation of asphalt mixture modified by organophilic nanoclay	364-373
Yu, Yujie / Wang, Xiaoxiang / Chen, Zhihua	Evaluation on steel cyclic response to strength reducing heat treatment for seismic design application	468-484
Li, Biao / Xu, Lihua / Chi, Yin / Huang, Biao / Li, Changning	Experimental investigation on the stress-strain behavior of steel fiber reinforced concrete subjected to uniaxial cyclic compression	109-118
Zhu, Hong / Faghani, Pedram / Tannert, Thomas	Experimental investigations on timber joints with single glued-in FRP rods	167-172
Alwash, Maitham / Breysse, Denys / Sbartaï, Zoubir Mehdi / Szilágyi, Katalin / Borosnyói, Adorján	Factors affecting the reliability of assessing the concrete strength by rebound hammer and cores	354-363
Elango, K. S. / Revathi, V.	Fal-G Binder Pervious Concrete	91-99
Yeon, Kyu-Seok / Choi, Yoon-Sang / Kim, Kwan-Kyu / Yeon, Jung Heum	Flexural fatigue life analysis of unsaturated polyester-methyl methacrylate polymer concrete	336-343
Ji, Yanliang / Sun, Zhenping / Jiang, Xiaoxing / Liu, Yi / Shui, Liangliang / Chen, Chao	Fractal characterization on pore structure and analysis of fluidity and bleeding of fresh cement paste based on 1H low-field NMR	445-453
Morenon, Pierre / Multon, Stéphane / Sellier, Alain / Grimal, Etienne / Hamon, François / Bourdarot, Eric	Impact of stresses and restraints on ASR expansion	58-74
Katkhuda, Hasan / Shatarat, Nasim	Improving the mechanical properties of recycled concrete aggregate using chopped basalt fibers and acid treatment	328-335
Wang, Y. / Nanukuttan, S. / Bai, Y. / Basheer, P. A. M.	Influence of combined carbonation and chloride ingress regimes on rate of ingress and redistribution of chlorides in concretes	173-183
Huang, Lepeng / Hua, Jianmin / Kang, Ming / Zhang, Aili	Influence of reinforcement configuration on the shrinkage and cracking potential of high-performance concrete	20-30
Isailović, Ivan / Wistuba, Michael P. / Cannone Falchetto, Augusto	Influence of rest period on asphalt recovery considering nonlinearity and self-heating	321-327
Gesoǧlu, Mehmet / Güneyisi, Erhan / Hansu, Osman / Etli, Serkan / Alhassan, Mahammed	Mechanical and fracture characteristics of self-compacting concretes containing different percentage of plastic waste powder	562-569
Shehab El-Din, Hamdy K. / Eisa, Ahmed S. / Abdel Aziz, Baligh H. / Ibrahim, Ahmed	Mechanical performance of high strength concrete made from high volume of Metakaolin and hybrid fibers	203-209
Paiva, H. / Silva, A. S. / Velosa, A. / Cachim, P. / Ferreira, V. M.	Microstructure and hardened state properties on pozzolan-containing concrete	374-384
Woon Choi, Se / Park, Sang Wook / Seon Park, Hyo	Multi-objective design model for retrofit of reinforced concrete frames with infilled walls using FRP bracings	454-467
Page, Jonathan / Khadraoui, Fouzia / Boutouil, Mohamed / Gomina, Moussa	Multi-physical properties of a structural concrete incorporating short flax fibers	344-353
Benzerzour, Mahfoud / Amar, Mouhamadou / Abriak, Nor-Edine	New experimental approach of the reuse of dredged sediments in a cement matrix by physical and heat treatment	432-444
Wiwatrojanagul, Pongsak / Sahamitmongkol, Raktipong / Tangtermsirikul, Somnuk / Khamsemanan, Nirattaya	A new method to determine locations of rebars and estimate cover thickness of RC structures using GPR data	257-273
Balázs, György L. / Czoboly, Olivér / Lublóy, Éva / Kapitány, Kristóf / Barsi, Árpád	Observation of steel fibres in concrete with Computed Tomography	534-541
Kanojia, Apeksha / Jain, Sarvesh K.	Performance of coconut shell as coarse aggregate in concrete	150-156
Gao, Yan-hong / Zhang, Jun-zhi / Zhang, Shan / Zhang, Yu-rong	Probability distribution of convection zone depth of chloride in concrete in a marine tidal environment	485-495
Mohammed, Siline	Processing, effect and reactivity assessment of artificial pozzolans obtained from clays and clay wastes: A review	10-19
Hanif, Asad / Lu, Zeyu / Diao, Su / Zeng, Xiaohui / Li, Zongjin	Properties investigation of fiber reinforced cement-based composites incorporating cenosphere fillers	139-149
Wei, Xuefei / Liu, Xiaoli / Duan, Yunling / Feng, Jinming	Property transformation of a modified sulfoaluminate grouting material under pressure circulation for a water-sealed underground oil cavern	210-220
Benedetto, Andrea / Tosti, Fabio / Bianchini Ciampoli, Luca / Calvi, Alessandro / Brancadoro, Maria Giulia / Alani, Amir M.	Railway ballast condition assessment using ground-penetrating radar – An experimental, numerical simulation and modelling development	508-520
Xing, Chao / Tan, Yiqiu / Liu, Xueyan / Anupam, Kumar / Scarpas, Tom	Research on local deformation property of asphalt mixture using digital image correlation	416-423
Ismail, Mohamed K. / Hassan, Assem A. A.	Shear behaviour of large-scale rubberized concrete beams reinforced with steel fibres	43-57
Praticò, Filippo G. / Fedele, Rosario / Vizzari, Domenico	Significance and reliability of absorption spectra of quiet pavements	274-281
Xiang, Yu / Fang, Zhi / Fang, Yawei	Single and multiple impact behavior of CFRP cables under pretension	521-533
Rahman, Muhammad Ashiqur / Sarker, Prabir Kumar / Shaikh, Faiz Uddin Ahmed / Saha, Ashish Kumer	Soundness and compressive strength of Portland cement blended with ground granulated ferronickel slag	194-202
Zhu, Fei / Zhou, Qiang / Wang, Fenglai / Yang, Xu	Spatial variability and sensitivity analysis on the compressive strength of hollow concrete block masonry wallettes	129-138
Li, L. G. / Huang, Z. H. / Zhu, J. / Kwan, A. K. H. / Chen, H. Y.	Synergistic effects of micro-silica and nano-silica on strength and microstructure of mortar	229-238
Sadouki, Hamid / Denarié, Emmanuel / Brühwiler, Eugen	Validation of a FEA model of structural response of RC-cantilever beams strengthened with a (R-) UHPFRC layer	100-108
Arrigoni, Alessandro / Pelosato, Renato / Dotelli, Giovanni / Beckett, Christopher T. S. / Ciancio, Daniela	Weathering's beneficial effect on waste-stabilised rammed earth: a chemical and microstructural investigation	157-166

Über diese
Datenseite
IssueID
22622
Veröffentlicht am:
15.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Juni 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Juni 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.