Construction and Building Materials - March 2017

Published:	March 2017

Articles in this Issue

Author(s)	Title	Page(s)
Abavisani, Iman / Rezaifar, Omid / Kheyroddin, Ali	Alternating Magnetic Field Effect on Fine-aggregate Concrete Compressive Strength	83-90
Sollazzo, G. / Fwa, T. F. / Bosurgi, G.	An ANN model to correlate roughness and structural performance in asphalt pavements	684-693
Shi, Wei / Wang, Tian-Zheng / Dong, Ze-Hua / Guo, Xing-Peng	Application of wire beam electrode technique to investigate the migrating behavior of corrosion inhibitors in mortar	167-175
Kouroussis, Georges / Ben Fekih, Lassaad / Descamps, Thierry	Assessment of timber element mechanical properties using experimental modal analysis	254-261
Wang, Zhenyu / Zhang, Yi / Chen, Feng / Wang, Guoqing / Wang, Lizhong / Jiang, Jianqun	Axial bearing capacity of large-diameter grouted connections analyzed by means of a simplified double shear test	245-253
Wang, Wenjie / Chouw, Nawawi	The behaviour of coconut fibre reinforced concrete (CFRC) under impact loading	452-461
Li, Wei / Lang, Lei / Lin, Zhenyue / Wang, Zhihao / Zhang, Fanggang	Characteristics of dry shrinkage and temperature shrinkage of cement-stabilized steel slag	540-548
Essabir, Hamid / Bensalah, Mohammed Ouadi / Rodrigue, Denis / Bouhfid, Rachid / Qaiss, Abou el kacem	A comparison between bio- and mineral calcium carbonate on the properties of polypropylene composites	549-555
Dong, Fuqiang / Yu, Xin / Xu, Bo / Wang, Tianyu	Comparison of high temperature performance and microstructure for foamed WMA and HMA with RAP binder	594-601
Qiao, Guofu / Guo, Bingbing / Li, Zuohua / Ou, Jinping / He, Zheng	Corrosion behavior of a steel bar embedded in a cement-based conductive composite	388-396
Zhang, Xuhui / Wang, Lei / Zhang, Jianren / Liu, Yongming	Corrosion-induced flexural behavior degradation of locally ungrouted post-tensioned concrete beams	7-17
Arenas, C. / Luna-Galiano, Y. / Leiva, C. / Vilches, L. F. / Arroyo, F. / Villegas, R. / Fernández-Pereira, C.	Development of a fly ash-based geopolymeric concrete with construction and demolition wastes as aggregates in acoustic barriers	433-442
Gao, Jie / Wang, Zhenjun / Zhang, Ting / Zhou, Liang	Dispersion of carbon fibers in cement-based composites with different mixing methods	220-227
Ren, Daming / Yan, Chunjie / Duan, Ping / Zhang, Zuhua / Li, Lingyao / Yan, Zhongyun	Durability performances of wollastonite, tremolite and basalt fiber-reinforced metakaolin geopolymer composites under sulfate and chloride attack	56-66
Siline, Mohammed / Ghorbel, Elhem / Bibi, Mekki	Effect of freeze – Thaw cycles on the physicomechanical properties of a pozzolanic mortar	32-38
Ghiasvand, E. / Ramezanianpour, A. A.	Effect of grinding method and particle size distribution on long term properties of binary and ternary cements	75-82
Liu, Baoju / Liang, Dong	Effect of mass ratio of asphalt to cement on the properties of cement modified asphalt emulsion mortar	39-43
Rostami, M. / Behfarnia, K.	The effect of silica fume on durability of alkali activated slag concrete	262-268
Altinok, Mustafa / Kucuktuvek, Mustafa / Bircan, Mevlut Cihan / Keskin, Hakan	Effects of cutting directions on the bonding strength in some wood types	1-6
Uddin, Mohammed Tarek / Mahmood, Aziz Hasan / Kamal, Md. Rubayet Ibna / Yashin, S. M. / Zihan, Zia Uddin Ahmed	Effects of maximum size of brick aggregate on properties of concrete	713-726
Pekrioglu Balkıs, Ayse	The effects of waste marble dust and polypropylene fiber contents on mechanical properties of gypsum stabilized earthen	556-562
Zhou, Cheng / Li, Fangxian / Hu, Jie / Ren, Mengmeng / Wei, Jiangxiong / Yu, Qijun	Enhanced mechanical properties of cement paste by hybrid graphene oxide/carbon nanotubes	336-345
Ashrafi, Hamed / Bazli, Milad / Oskouei, Asghar Vatani	Enhancement of bond characteristics of ribbed-surface GFRP bars with concrete by using carbon fiber mat anchorage	507-519
Kordi, Zeiaolhagh / Shafabakhsh, GholamAli	Evaluating mechanical properties of stone mastic asphalt modified with Nano Fe2O3	530-539
Morales-Conde, María Jesús / Machado, José S.	Evaluation of cross-sectional variation of timber bending modulus of elasticity by stress waves	617-625
Akkaoui, A. / Caré, S. / Vandamme, M.	Experimental and micromechanical analysis of the elastic properties of wood-aggregate concrete	346-357
Wang, Zigeng / Dai, Qingli / Guo, Shuaicheng / Wang, Ronghua / Ye, Mingxiao / Yap, Yoke Khin	Experimental investigation of physical properties and accelerated sunlight-healing performance of flake graphite and exfoliated graphite nanoplatelet modified asphalt materials	412-423
Wang, Hongwei / Wu, Chengqing / Zhang, Fangrui / Fang, Qin / Xiang, Hengbo / Li, Peng / Li, Zhibin / Zhou, Yun / Zhang, Yadong / Li, Jun	Experimental study of large-sized concrete filled steel tube columns under blast load	131-141
Al-Osta, M. A. / Isa, M. N. / Baluch, M. H. / Rahman, M. K.	Flexural behavior of reinforced concrete beams strengthened with ultra-high performance fiber reinforced concrete	279-296
Chithambaram, S. Jeeva / Kumar, Sanjay	Flexural behaviour of bamboo based ferrocement slab panels with flyash	641-648
Mohammed, Tarek Uddin / Das, Hare Krishna / Mahmood, Aziz Hasan / Rahman, Md. Nafiur / Awal, M. A.	Flexural performance of RC beams made with recycled brick aggregate	67-74
Ulzurrun, Gonzalo / Zanuy, Carlos	Flexural response of SFRC under impact loading	397-411
Li, Chong / Wen, Qingjuan / Hong, Mingzhu / Liang, Zhiyu / Zhuang, Zanyong / Yu, Yan	Heavy metals leaching in bricks made from lead and zinc mine tailings with varied chemical components	443-451
Guo, Bin / Pan, De'an / Liu, Bo / Volinsky, Alex A. / Fincan, Mustafa / Du, Jinfeng / Zhang, Shengen	Immobilization mechanism of Pb in fly ash-based geopolymer	123-130
Yuan, Jie / Wang, Jiayu / Xiao, Feipeng / Amirkhanian, Serji / Wang, Jun / Xu, Zhizhou	Impacts of multiple-polymer components on high temperature performance characteristics of airfield modified binders	694-702
Toumi Ajimi, Wiem / Chataigner, Sylvain / Gaillet, Laurent	Influence of low elevated temperature on the mechanical behavior of steel rebars and prestressing wires in nuclear containment structures	462-470
Wang, Hui / Gao, Xiaojian / Wang, Rui	The influence of rheological parameters of cement paste on the dispersion of carbon nanofibers and self-sensing performance	673-683
Singh, Manpreet / Srivastava, Anshuman / Bhunia, Dipendu	An investigation on effect of partial replacement of cement by waste marble slurry	471-488
Pappalardo, G. / Mineo, S.	Investigation on the mechanical attitude of basaltic rocks from Mount Etna through InfraRed Thermography and laboratory tests	228-235
Fakhri, Mansour / Hosseini, Sayyed Ali	Laboratory evaluation of rutting and moisture damage resistance of glass fiber modified warm mix asphalt incorporating high RAP proportion	626-640
Tanzadeh, Javad / Vafaeian, Mahmood / Yusefzadeh-Fard, Mikael	Laboratory study on the performance of hybrid macro soil fiber reinforced mixture	50-55
Souza, Lourdes M. S. / Polder, Rob B. / Copuroglu, Oguzhan	Lithium migration in a two-chamber set-up as treatment against expansion due to alkali–silica reaction	324-335
Maddalena, Riccardo / Hamilton, Andrea	Low-pressure silica injection for porosity reduction in cementitious materials	610-616
Harbec, D. / Zidol, A. / Tagnit-Hamou, A. / Gitzhofer, F.	Mechanical and durability properties of high performance glass fume concrete and mortars	142-156
Mirhosseini, Seyed Reza / Fadaee, Mostafa / Tabatabaei, Ramin / Fadaee, Mohammad Javad	Mechanical properties of concrete with Sarcheshmeh mineral complex copper slag as a part of cementitious materials	44-49
Li, Yue / Liu, Xiongfei / Wu, Miaoke	Mechanical properties of FRP-strengthened concrete at elevated temperature	424-432
Zhou, Chunheng / Chen, Zongping	Mechanical properties of recycled concrete made with different types of coarse aggregate	497-506
Zhang, Derun / Luo, Rong	Modeling of adsorption isotherms of probe vapors on aggregates for accurate determination of aggregate surface energy components	374-387
Karahrodi, Marzieh Habibi / Jazani, Omid Moini / Paran, Seyed Mohammad Reza / Formela, Krzysztof / Saeb, Mohammad Reza	Modification of thermal and rheological characteristics of bitumen by waste PET/GTR blends	157-166
Thiagarajan, Ganesh / Patil, Mayuri	Modified virtual internal bond fracture constitutive model for concrete	364-373
Shao, Huijun / Sun, Lijun / Liu, Liping / You, Zhanping / Yang, Xu	A novel double-drum mixing technique for plant hot mix asphalt recycling with high reclaimed asphalt pavement content and rejuvenator	236-244
Liu, Dan / Su, Chengguang / Ren, Juanjuan / Wang, Linbing / Kendrick, Buck / Liu, Xueyi	Numerical analysis of new pre-installed steel modular railroad track assembly	269-278
Diego, S. / Casado, J. A. / Carrascal, I. / Ferreño, D. / Cardona, J. / Arcos, R.	Numerical and experimental characterization of the mechanical behavior of a new recycled elastomer for vibration isolation in railway applications	18-31
Zhang, Si / Yang, Dongmin / Sheng, Yong / Garrity, Stephen W. / Xu, Lihua	Numerical modelling of FRP-reinforced masonry walls under in-plane seismic loading	649-663
Garbacz, Andrzej / Piotrowski, Tomasz / Courard, Luc / Kwaśniewski, Lesław	On the evaluation of interface quality in concrete repair system by means of impact-echo signal analysis	311-323
Hasan, Hayder Alaa / Sheikh, M. Neaz / Hadi, Muhammad N. S.	Performance evaluation of high strength concrete and steel fibre high strength concrete columns reinforced with GFRP bars and helices	297-310
Pang, Cuijuan / Pei, Huafu / Li, Zongjin	Performance investigation of cement-based laminated multifunctional magnetoelectric composites	585-593
Aguayo, Matthew / Das, Sumanta / Castro, Cesar / Kabay, Nihat / Sant, Gaurav / Neithalath, Narayanan	Porous inclusions as hosts for phase change materials in cementitious composites: Characterization, thermal performance, and analytical models	574-584
Fang, Xinyue / Li, Qie / Yang, Tao / Li, Zhihong / Zhu, Yumei	Preparation and characterization of glass foams for artificial floating island from waste glass and Li2CO3	358-363
Hacıefendioğlu, Kemal / Başağa, Hasan Basri / Banerjee, Swagata	Probabilistic analysis of historic masonry bridges to random ground motion by Monte Carlo Simulation using Response Surface Method	199-209
Wang, Daiyu / Wang, Zhenyu / Smith, Scott T. / Yu, Tao	Seismic performance of CFRP-confined circular high-strength concrete columns with high axial compression ratio	91-103
Xu, Yi / Xu, Qing / Chen, Shenghong / Li, Xinxin	Self-restraint thermal stress in early-age concrete samples and its evaluation	104-115
Erdem, Savaş / Hanbay, Serap / Blankson, Marva Angela	Self-sensing damage assessment and image-based surface crack quantification of carbon nanofibre reinforced concrete	520-529
El-Sayed, Ahmed K.	Shear capacity assessment of reinforced concrete beams with corroded stirrups	176-184
Zhang, Jun / Wang, Qing / Zhang, Jiajia	Shrinkage of internal cured high strength engineered cementitious composite with pre-wetted sand-like zeolite	664-672
Dhinakaran, G. / Kumar, K. Revanth / Vijayarakhavan, S. / Avinash, M.	Strength and durability characteristics of ternary blend and lightweight HPC	727-736
Ho, Lanh Si / Nakarai, Kenichiro / Ogawa, Yuko / Sasaki, Takashi / Morioka, Minoru	Strength development of cement-treated soils: Effects of water content, carbonation, and pozzolanic reaction under drying curing condition	703-712
Mohamad, Gihad / Fonseca, Fernando S. / Vermeltfoort, Ad T. / Martens, Dirk R. W. / Lourenço, Paulo B.	Strength, behavior, and failure mode of hollow concrete masonry constructed with mortars of different strengths	489-496
Mohamad, Noridah / Goh, Wan Inn / Abdullah, Redzuan / Abdul Samad, Abdul Aziz / Mendis, Priyan / Sofi, Massoud	Structural performance of FCS wall subjected to axial load	185-198
Nguyen, Duy H. / Dao, Vinh T. N. / Lura, Pietro	Tensile properties of concrete at very early ages	563-573
Lu, Linnu / He, Yongjia / Ping, Bing / Wang, Fazhou / Hu, Shuguang	TiO2 containing electromagnetic wave absorbing aggregate and its application in concrete	602-609
Wu, Jin / Jing, Xianhang / Wang, Zhe	Uni-axial compressive stress-strain relation of recycled coarse aggregate concrete after freezing and thawing cycles	210-219
Bani Ardalan, Reza / Joshaghani, Alireza / Hooton, R. Douglas	Workability retention and compressive strength of self-compacting concrete incorporating pumice powder and silica fume	116-122

About this
data sheet
IssueID
22621
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - March 2017

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - March 2017

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.