Construction and Building Materials - März 2017

Erschienen:	März 2017

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Abavisani, Iman / Rezaifar, Omid / Kheyroddin, Ali	Alternating Magnetic Field Effect on Fine-aggregate Concrete Compressive Strength	83-90
Sollazzo, G. / Fwa, T. F. / Bosurgi, G.	An ANN model to correlate roughness and structural performance in asphalt pavements	684-693
Shi, Wei / Wang, Tian-Zheng / Dong, Ze-Hua / Guo, Xing-Peng	Application of wire beam electrode technique to investigate the migrating behavior of corrosion inhibitors in mortar	167-175
Kouroussis, Georges / Ben Fekih, Lassaad / Descamps, Thierry	Assessment of timber element mechanical properties using experimental modal analysis	254-261
Wang, Zhenyu / Zhang, Yi / Chen, Feng / Wang, Guoqing / Wang, Lizhong / Jiang, Jianqun	Axial bearing capacity of large-diameter grouted connections analyzed by means of a simplified double shear test	245-253
Wang, Wenjie / Chouw, Nawawi	The behaviour of coconut fibre reinforced concrete (CFRC) under impact loading	452-461
Li, Wei / Lang, Lei / Lin, Zhenyue / Wang, Zhihao / Zhang, Fanggang	Characteristics of dry shrinkage and temperature shrinkage of cement-stabilized steel slag	540-548
Essabir, Hamid / Bensalah, Mohammed Ouadi / Rodrigue, Denis / Bouhfid, Rachid / Qaiss, Abou el kacem	A comparison between bio- and mineral calcium carbonate on the properties of polypropylene composites	549-555
Dong, Fuqiang / Yu, Xin / Xu, Bo / Wang, Tianyu	Comparison of high temperature performance and microstructure for foamed WMA and HMA with RAP binder	594-601
Qiao, Guofu / Guo, Bingbing / Li, Zuohua / Ou, Jinping / He, Zheng	Corrosion behavior of a steel bar embedded in a cement-based conductive composite	388-396
Zhang, Xuhui / Wang, Lei / Zhang, Jianren / Liu, Yongming	Corrosion-induced flexural behavior degradation of locally ungrouted post-tensioned concrete beams	7-17
Arenas, C. / Luna-Galiano, Y. / Leiva, C. / Vilches, L. F. / Arroyo, F. / Villegas, R. / Fernández-Pereira, C.	Development of a fly ash-based geopolymeric concrete with construction and demolition wastes as aggregates in acoustic barriers	433-442
Gao, Jie / Wang, Zhenjun / Zhang, Ting / Zhou, Liang	Dispersion of carbon fibers in cement-based composites with different mixing methods	220-227
Ren, Daming / Yan, Chunjie / Duan, Ping / Zhang, Zuhua / Li, Lingyao / Yan, Zhongyun	Durability performances of wollastonite, tremolite and basalt fiber-reinforced metakaolin geopolymer composites under sulfate and chloride attack	56-66
Siline, Mohammed / Ghorbel, Elhem / Bibi, Mekki	Effect of freeze – Thaw cycles on the physicomechanical properties of a pozzolanic mortar	32-38
Ghiasvand, E. / Ramezanianpour, A. A.	Effect of grinding method and particle size distribution on long term properties of binary and ternary cements	75-82
Liu, Baoju / Liang, Dong	Effect of mass ratio of asphalt to cement on the properties of cement modified asphalt emulsion mortar	39-43
Rostami, M. / Behfarnia, K.	The effect of silica fume on durability of alkali activated slag concrete	262-268
Altinok, Mustafa / Kucuktuvek, Mustafa / Bircan, Mevlut Cihan / Keskin, Hakan	Effects of cutting directions on the bonding strength in some wood types	1-6
Uddin, Mohammed Tarek / Mahmood, Aziz Hasan / Kamal, Md. Rubayet Ibna / Yashin, S. M. / Zihan, Zia Uddin Ahmed	Effects of maximum size of brick aggregate on properties of concrete	713-726
Pekrioglu Balkıs, Ayse	The effects of waste marble dust and polypropylene fiber contents on mechanical properties of gypsum stabilized earthen	556-562
Zhou, Cheng / Li, Fangxian / Hu, Jie / Ren, Mengmeng / Wei, Jiangxiong / Yu, Qijun	Enhanced mechanical properties of cement paste by hybrid graphene oxide/carbon nanotubes	336-345
Ashrafi, Hamed / Bazli, Milad / Oskouei, Asghar Vatani	Enhancement of bond characteristics of ribbed-surface GFRP bars with concrete by using carbon fiber mat anchorage	507-519
Kordi, Zeiaolhagh / Shafabakhsh, GholamAli	Evaluating mechanical properties of stone mastic asphalt modified with Nano Fe2O3	530-539
Morales-Conde, María Jesús / Machado, José S.	Evaluation of cross-sectional variation of timber bending modulus of elasticity by stress waves	617-625
Akkaoui, A. / Caré, S. / Vandamme, M.	Experimental and micromechanical analysis of the elastic properties of wood-aggregate concrete	346-357
Wang, Zigeng / Dai, Qingli / Guo, Shuaicheng / Wang, Ronghua / Ye, Mingxiao / Yap, Yoke Khin	Experimental investigation of physical properties and accelerated sunlight-healing performance of flake graphite and exfoliated graphite nanoplatelet modified asphalt materials	412-423
Wang, Hongwei / Wu, Chengqing / Zhang, Fangrui / Fang, Qin / Xiang, Hengbo / Li, Peng / Li, Zhibin / Zhou, Yun / Zhang, Yadong / Li, Jun	Experimental study of large-sized concrete filled steel tube columns under blast load	131-141
Al-Osta, M. A. / Isa, M. N. / Baluch, M. H. / Rahman, M. K.	Flexural behavior of reinforced concrete beams strengthened with ultra-high performance fiber reinforced concrete	279-296
Chithambaram, S. Jeeva / Kumar, Sanjay	Flexural behaviour of bamboo based ferrocement slab panels with flyash	641-648
Mohammed, Tarek Uddin / Das, Hare Krishna / Mahmood, Aziz Hasan / Rahman, Md. Nafiur / Awal, M. A.	Flexural performance of RC beams made with recycled brick aggregate	67-74
Ulzurrun, Gonzalo / Zanuy, Carlos	Flexural response of SFRC under impact loading	397-411
Li, Chong / Wen, Qingjuan / Hong, Mingzhu / Liang, Zhiyu / Zhuang, Zanyong / Yu, Yan	Heavy metals leaching in bricks made from lead and zinc mine tailings with varied chemical components	443-451
Guo, Bin / Pan, De'an / Liu, Bo / Volinsky, Alex A. / Fincan, Mustafa / Du, Jinfeng / Zhang, Shengen	Immobilization mechanism of Pb in fly ash-based geopolymer	123-130
Yuan, Jie / Wang, Jiayu / Xiao, Feipeng / Amirkhanian, Serji / Wang, Jun / Xu, Zhizhou	Impacts of multiple-polymer components on high temperature performance characteristics of airfield modified binders	694-702
Toumi Ajimi, Wiem / Chataigner, Sylvain / Gaillet, Laurent	Influence of low elevated temperature on the mechanical behavior of steel rebars and prestressing wires in nuclear containment structures	462-470
Wang, Hui / Gao, Xiaojian / Wang, Rui	The influence of rheological parameters of cement paste on the dispersion of carbon nanofibers and self-sensing performance	673-683
Singh, Manpreet / Srivastava, Anshuman / Bhunia, Dipendu	An investigation on effect of partial replacement of cement by waste marble slurry	471-488
Pappalardo, G. / Mineo, S.	Investigation on the mechanical attitude of basaltic rocks from Mount Etna through InfraRed Thermography and laboratory tests	228-235
Fakhri, Mansour / Hosseini, Sayyed Ali	Laboratory evaluation of rutting and moisture damage resistance of glass fiber modified warm mix asphalt incorporating high RAP proportion	626-640
Tanzadeh, Javad / Vafaeian, Mahmood / Yusefzadeh-Fard, Mikael	Laboratory study on the performance of hybrid macro soil fiber reinforced mixture	50-55
Souza, Lourdes M. S. / Polder, Rob B. / Copuroglu, Oguzhan	Lithium migration in a two-chamber set-up as treatment against expansion due to alkali–silica reaction	324-335
Maddalena, Riccardo / Hamilton, Andrea	Low-pressure silica injection for porosity reduction in cementitious materials	610-616
Harbec, D. / Zidol, A. / Tagnit-Hamou, A. / Gitzhofer, F.	Mechanical and durability properties of high performance glass fume concrete and mortars	142-156
Mirhosseini, Seyed Reza / Fadaee, Mostafa / Tabatabaei, Ramin / Fadaee, Mohammad Javad	Mechanical properties of concrete with Sarcheshmeh mineral complex copper slag as a part of cementitious materials	44-49
Li, Yue / Liu, Xiongfei / Wu, Miaoke	Mechanical properties of FRP-strengthened concrete at elevated temperature	424-432
Zhou, Chunheng / Chen, Zongping	Mechanical properties of recycled concrete made with different types of coarse aggregate	497-506
Zhang, Derun / Luo, Rong	Modeling of adsorption isotherms of probe vapors on aggregates for accurate determination of aggregate surface energy components	374-387
Karahrodi, Marzieh Habibi / Jazani, Omid Moini / Paran, Seyed Mohammad Reza / Formela, Krzysztof / Saeb, Mohammad Reza	Modification of thermal and rheological characteristics of bitumen by waste PET/GTR blends	157-166
Thiagarajan, Ganesh / Patil, Mayuri	Modified virtual internal bond fracture constitutive model for concrete	364-373
Shao, Huijun / Sun, Lijun / Liu, Liping / You, Zhanping / Yang, Xu	A novel double-drum mixing technique for plant hot mix asphalt recycling with high reclaimed asphalt pavement content and rejuvenator	236-244
Liu, Dan / Su, Chengguang / Ren, Juanjuan / Wang, Linbing / Kendrick, Buck / Liu, Xueyi	Numerical analysis of new pre-installed steel modular railroad track assembly	269-278
Diego, S. / Casado, J. A. / Carrascal, I. / Ferreño, D. / Cardona, J. / Arcos, R.	Numerical and experimental characterization of the mechanical behavior of a new recycled elastomer for vibration isolation in railway applications	18-31
Zhang, Si / Yang, Dongmin / Sheng, Yong / Garrity, Stephen W. / Xu, Lihua	Numerical modelling of FRP-reinforced masonry walls under in-plane seismic loading	649-663
Garbacz, Andrzej / Piotrowski, Tomasz / Courard, Luc / Kwaśniewski, Lesław	On the evaluation of interface quality in concrete repair system by means of impact-echo signal analysis	311-323
Hasan, Hayder Alaa / Sheikh, M. Neaz / Hadi, Muhammad N. S.	Performance evaluation of high strength concrete and steel fibre high strength concrete columns reinforced with GFRP bars and helices	297-310
Pang, Cuijuan / Pei, Huafu / Li, Zongjin	Performance investigation of cement-based laminated multifunctional magnetoelectric composites	585-593
Aguayo, Matthew / Das, Sumanta / Castro, Cesar / Kabay, Nihat / Sant, Gaurav / Neithalath, Narayanan	Porous inclusions as hosts for phase change materials in cementitious composites: Characterization, thermal performance, and analytical models	574-584
Fang, Xinyue / Li, Qie / Yang, Tao / Li, Zhihong / Zhu, Yumei	Preparation and characterization of glass foams for artificial floating island from waste glass and Li2CO3	358-363
Hacıefendioğlu, Kemal / Başağa, Hasan Basri / Banerjee, Swagata	Probabilistic analysis of historic masonry bridges to random ground motion by Monte Carlo Simulation using Response Surface Method	199-209
Wang, Daiyu / Wang, Zhenyu / Smith, Scott T. / Yu, Tao	Seismic performance of CFRP-confined circular high-strength concrete columns with high axial compression ratio	91-103
Xu, Yi / Xu, Qing / Chen, Shenghong / Li, Xinxin	Self-restraint thermal stress in early-age concrete samples and its evaluation	104-115
Erdem, Savaş / Hanbay, Serap / Blankson, Marva Angela	Self-sensing damage assessment and image-based surface crack quantification of carbon nanofibre reinforced concrete	520-529
El-Sayed, Ahmed K.	Shear capacity assessment of reinforced concrete beams with corroded stirrups	176-184
Zhang, Jun / Wang, Qing / Zhang, Jiajia	Shrinkage of internal cured high strength engineered cementitious composite with pre-wetted sand-like zeolite	664-672
Dhinakaran, G. / Kumar, K. Revanth / Vijayarakhavan, S. / Avinash, M.	Strength and durability characteristics of ternary blend and lightweight HPC	727-736
Ho, Lanh Si / Nakarai, Kenichiro / Ogawa, Yuko / Sasaki, Takashi / Morioka, Minoru	Strength development of cement-treated soils: Effects of water content, carbonation, and pozzolanic reaction under drying curing condition	703-712
Mohamad, Gihad / Fonseca, Fernando S. / Vermeltfoort, Ad T. / Martens, Dirk R. W. / Lourenço, Paulo B.	Strength, behavior, and failure mode of hollow concrete masonry constructed with mortars of different strengths	489-496
Mohamad, Noridah / Goh, Wan Inn / Abdullah, Redzuan / Abdul Samad, Abdul Aziz / Mendis, Priyan / Sofi, Massoud	Structural performance of FCS wall subjected to axial load	185-198
Nguyen, Duy H. / Dao, Vinh T. N. / Lura, Pietro	Tensile properties of concrete at very early ages	563-573
Lu, Linnu / He, Yongjia / Ping, Bing / Wang, Fazhou / Hu, Shuguang	TiO2 containing electromagnetic wave absorbing aggregate and its application in concrete	602-609
Wu, Jin / Jing, Xianhang / Wang, Zhe	Uni-axial compressive stress-strain relation of recycled coarse aggregate concrete after freezing and thawing cycles	210-219
Bani Ardalan, Reza / Joshaghani, Alireza / Hooton, R. Douglas	Workability retention and compressive strength of self-compacting concrete incorporating pumice powder and silica fume	116-122

Über diese
Datenseite
IssueID
22621
Veröffentlicht am:
15.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - März 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - März 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.