Construction and Building Materials - May 2017

Published:	May 2017

Articles in this Issue

Author(s)	Title	Page(s)
Zhang, Xiaoyuan / Gu, Xingyu / Lv, Junxiu / Zou, Xiaoyong	3D numerical model to investigate the rheological properties of basalt fiber reinforced asphalt-like materials	185-194
Li, Peilong / Ding, Zhan / Zou, Peng / Sun, Anshi	Analysis of physico-chemical properties for crumb rubber in process of asphalt modification	418-426
Eskandari-Naddaf, Hamid / Kazemi, Ramin	ANN prediction of cement mortar compressive strength, influence of cement strength class	1-11
Choumanidis, D. / Badogiannis, E. / Nomikos, P. / Sofianos, A.	Barcelona test for the evaluation of the mechanical properties of single and hybrid FRC, exposed to elevated temperature	296-305
Hassan, W. M. / Hodhod, O. A. / Hilal, M. S. / Bahnasaway, H. H.	Behavior of eccentrically loaded high strength concrete columns jacketed with FRP laminates	508-527
Gholampour, Aliakbar / Ozbakkaloglu, Togay / Hassanli, Reza	Behavior of rubberized concrete under active confinement	372-382
Wehbe, Yara / Ghahremaninezhad, Ali	Combined effect of shrinkage reducing admixtures (SRA) and superabsorbent polymers (SAP) on the autogenous shrinkage, hydration and properties of cementitious materials	151-162
Akyıldız, Aylin / Köse, Esra Tınmaz / Yıldız, Aylin	Compressive strength and heavy metal leaching of concrete containing medical waste incineration ash	326-332
Dassekpo, Jean-Baptiste Mawulé / Zha, Xiaoxiong / Zhan, Jiapeng	Compressive strength performance of geopolymer paste derived from Completely Decomposed Granite (CDG) and partial fly ash replacement	195-203
García Calvo, J. L. / Perez, G. / Carballosa, P. / Erkizia, E. / Gaitero, J. J. / Guerrero, A.	Development of ultra-high performance concretes with self-healing micro/nano-additions	306-315
Karim, M. R. / Hossain, M. M. / Zain, M. F. M. / Jamil, M. / Lai, F. C.	Durability properties of a non-cement binder made up of pozzolans with sodium hydroxide	174-184
Hou, Lijun / Liu, Hong / Xu, Shilang / Zhuang, Ning / Chen, Da	Effect of corrosion on bond behaviors of rebar embedded in ultra-high toughness cementitious composite	141-150
Wang, Qin / Cui, Xinyou / Wang, Jian / Li, Shiyu / Lv, Chunxiang / Dong, Yichen	Effect of fly ash on rheological properties of graphene oxide cement paste	35-44
Kumar, Rajiv / Saboo, Nikhil / Kumar, Praveen / Chandra, Satish	Effect of warm mix additives on creep and recovery response of conventional and polymer modified asphalt binders	352-362
Wang, Wei / Lu, Caifeng / Li, Yunxia / Yuan, Guanglin / Li, Qingtao	Effects of stress and high temperature on the carbonation resistance of fly ash concrete	486-495
Pineda, Paloma / García-Martínez, Antonio / Castizo-Morales, Diego	Environmental and structural analysis of cement-based vs. natural material-based grouting mortars. Results from the assessment of strengthening works	528-547
Nazzal, Munir D. / Iqbal, Md. Tanvir / Kim, Sang Soo / Abbas, Ala / Quasema, Md. Tanvir / Mogawer, Walaa	Evaluating the mechanical properties of terminal blend tire rubber mixtures incorporating RAP	427-433
Qi, Bing / Gao, Jianming / Chen, Fei / Shen, Daman	Evaluation of the damage process of recycled aggregate concrete under sulfate attack and wetting-drying cycles	254-262
Singh, M. / Sheikh, A. H. / Ali, M. S. Mohamed / Visintin, P. / Griffith, M. C.	Experimental and numerical study of the flexural behaviour of ultra-high performance fibre reinforced concrete beams	12-25
Du, Yunxing / Zhang, Mengmeng / Zhou, Fen / Zhu, Deju	Experimental study on basalt textile reinforced concrete under uniaxial tensile loading	88-100
Zhao, Shunbo / Ding, Xinxin / Zhao, Mingshuang / Li, Changyong / Pei, Songwei	Experimental study on tensile strength development of concrete with manufactured sand	247-253
Bilotta, Antonio / Ceroni, Francesca / Nigro, Emidio / Pecce, Marisa	Experimental tests on FRCM strengthening systems for tuff masonry elements	114-133
Yang, Zhengpeng / Zhang, Xuefeng / Liu, Xuan / Guan, Xuemao / Zhang, Chunjing / Niu, Yutao	Flexible and stretchable polyurethane/waterglass grouting material	240-246
Lee, Jong-Han / Cho, Baiksoon / Choi, Eunsoo	Flexural capacity of fiber reinforced concrete with a consideration of concrete strength and fiber content	222-231
Bezgin, Niyazi Ozgur	High performance concrete requirements for prefabricated high speed railway sleepers	340-351
Palla, R. / Karade, S. R. / Mishra, G. / Sharma, U. / Singh, L. P.	High strength sustainable concrete using silica nanoparticles	285-295
Sucharda, Oldrich / Pajak, Malgorzata / Ponikiewski, Tomasz / Konečný, Petr	Identification of mechanical and fracture properties of self-compacting concrete beams with different types of steel fibres using inverse analysis	263-275
Kantar, Erkan / Yuen, Terry Y. P. / Kobya, Veysel / Kuang, J. S.	Impact dynamics and energy dissipation capacity of fibre-reinforced self-compacting concrete plates	383-397
Hendi, Ali / Behravan, Amir / Mostofinejad, Davood / Moshtaghi, Seyed Mohsen / Rezayi, Kasra	Implementing ANN to minimize sewage systems concrete corrosion with glass beads substitution	441-454
Cristelo, Nuno / Cunha, Vítor M. C. F. / Topa Gomes, António / Araújo, Nuno / Miranda, Tiago / de Lurdes Lopes, Maria	Influence of fibre reinforcement on the post-cracking behaviour of a cement-stabilised sandy-clay subjected to indirect tensile stress	163-173
Yang, Datian	Investigation of the excess pore water pressure inside compacted asphalt mixture by dynamic triaxial tests	363-371
Zhang, Guixue / Yan, Yun / Hu, Zhihua / Xiao, Bo	Investigation on preparation of pyrite tailings-based mineral admixture with photocatalytic activity	26-34
Sangiorgi, Cesare / Tataranni, Piergiorgio / Simone, Andrea / Vignali, Valeria / Lantieri, Claudio / Dondi, Giulio	A laboratory and filed evaluation of Cold Recycled Mixture for base layer entirely made with Reclaimed Asphalt Pavement	232-239
Shadman, Majid / Ziari, Hassan	Laboratory evaluation of fatigue life characteristics of polymer modified porous asphalt: A dissipated energy approach	434-440
Zhou, Xiaoyong / Bhat, Prakash / Ouyang, Hui / Yu, Jiagan	Localization of cracks in cementitious materials under uniaxial tension with electrical resistance tomography	45-55
Das, Sekhar	Mechanical and water swelling properties of waste paper reinforced unsaturated polyester composites	469-478
Mokhtar, M. M. / Abo-El-Enein, S. A. / Hassaan, M. Y. / Morsy, M. S. / Khalil, M. H.	Mechanical performance, pore structure and micro-structural characteristics of graphene oxide nano platelets reinforced cement	333-339
Shakor, Pshtiwan / Sanjayan, Jay / Nazari, Ali / Nejadi, Shami	Modified 3D printed powder to cement-based material and mechanical properties of cement scaffold used in 3D printing	398-409
Grabiec, Anna M. / Starzyk, Justyna / Stefaniak, Katarzyna / Wierzbicki, Jędrzej / Zawal, Daniel	On possibility of improvement of compacted silty soils using biodeposition method	134-140
Ali, Mohamed E. / Alabdulkarem, Abdullah	On thermal characteristics and microstructure of a new insulation material extracted from date palm trees surface fibers	276-284
Hu, Xiaodi / Wang, Ning / Pan, Pan / Bai, Tao	Performance evaluation of asphalt mixture using brake pad waste as mineral filler	410-417
Li, Jiusu / Zhang, Yi / Liu, Guanlan / Peng, Xinghai	Preparation and performance evaluation of an innovative pervious concrete pavement	479-485
Yu, Bo / Liu, Jianbo / Chen, Zheng	Probabilistic evaluation method for corrosion risk of steel reinforcement based on concrete resistivity	101-113
Sitton, Jase D. / Zeinali, Yasha / Story, Brett A.	Rapid soil classification using artificial neural networks for use in constructing compressed earth blocks	214-221
Li, Qingtao / Liu, Lujie / Huang, Zhaohui / Yuan, Guanglin	Residual compressive strength of cement-based grouting material with early ages after fire	316-325
Kua, Teck-Ang / Arulrajah, Arul / Mohammadinia, Alireza / Horpibulsuk, Suksun / Mirzababaei, Mehdi	Stiffness and deformation properties of spent coffee grounds based geopolymers	79-87
García-Cuadrado, J. / Rodríguez, A. / Cuesta, I. I. / Calderón, V. / Gutiérrez-González, S.	Study and analysis by means of surface response to fracture behavior in lime-cement mortars fabricated with steelmaking slags	204-213
Cao, Chong	Transient surface permeability test: Experimental results and numerical interpretation	496-507
Mohammadi, Mohsen / Wu, Yu-Fei	Triaxial test for concrete under non-uniform passive confinement	455-468
Zhou, H. J. / Liang, X. B. / Zhang, X. L. / Lu, J. L. / Xing, F. / Mei, L.	Variation and degradation of steel and concrete bond performance with corroded stirrups	56-68
Sun, Wei / Hou, Kepeng / Yang, Zhiquan / Wen, Yiming	X-ray CT three-dimensional reconstruction and discrete element analysis of the cement paste backfill pore structure under uniaxial compression	69-78

About this
data sheet
IssueID
22618
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - May 2017

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - May 2017

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.