Construction and Building Materials - mai 2017

Publié:	mai 2017

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Zhang, Xiaoyuan / Gu, Xingyu / Lv, Junxiu / Zou, Xiaoyong	3D numerical model to investigate the rheological properties of basalt fiber reinforced asphalt-like materials	185-194
Li, Peilong / Ding, Zhan / Zou, Peng / Sun, Anshi	Analysis of physico-chemical properties for crumb rubber in process of asphalt modification	418-426
Eskandari-Naddaf, Hamid / Kazemi, Ramin	ANN prediction of cement mortar compressive strength, influence of cement strength class	1-11
Choumanidis, D. / Badogiannis, E. / Nomikos, P. / Sofianos, A.	Barcelona test for the evaluation of the mechanical properties of single and hybrid FRC, exposed to elevated temperature	296-305
Hassan, W. M. / Hodhod, O. A. / Hilal, M. S. / Bahnasaway, H. H.	Behavior of eccentrically loaded high strength concrete columns jacketed with FRP laminates	508-527
Gholampour, Aliakbar / Ozbakkaloglu, Togay / Hassanli, Reza	Behavior of rubberized concrete under active confinement	372-382
Wehbe, Yara / Ghahremaninezhad, Ali	Combined effect of shrinkage reducing admixtures (SRA) and superabsorbent polymers (SAP) on the autogenous shrinkage, hydration and properties of cementitious materials	151-162
Akyıldız, Aylin / Köse, Esra Tınmaz / Yıldız, Aylin	Compressive strength and heavy metal leaching of concrete containing medical waste incineration ash	326-332
Dassekpo, Jean-Baptiste Mawulé / Zha, Xiaoxiong / Zhan, Jiapeng	Compressive strength performance of geopolymer paste derived from Completely Decomposed Granite (CDG) and partial fly ash replacement	195-203
García Calvo, J. L. / Perez, G. / Carballosa, P. / Erkizia, E. / Gaitero, J. J. / Guerrero, A.	Development of ultra-high performance concretes with self-healing micro/nano-additions	306-315
Karim, M. R. / Hossain, M. M. / Zain, M. F. M. / Jamil, M. / Lai, F. C.	Durability properties of a non-cement binder made up of pozzolans with sodium hydroxide	174-184
Hou, Lijun / Liu, Hong / Xu, Shilang / Zhuang, Ning / Chen, Da	Effect of corrosion on bond behaviors of rebar embedded in ultra-high toughness cementitious composite	141-150
Wang, Qin / Cui, Xinyou / Wang, Jian / Li, Shiyu / Lv, Chunxiang / Dong, Yichen	Effect of fly ash on rheological properties of graphene oxide cement paste	35-44
Kumar, Rajiv / Saboo, Nikhil / Kumar, Praveen / Chandra, Satish	Effect of warm mix additives on creep and recovery response of conventional and polymer modified asphalt binders	352-362
Wang, Wei / Lu, Caifeng / Li, Yunxia / Yuan, Guanglin / Li, Qingtao	Effects of stress and high temperature on the carbonation resistance of fly ash concrete	486-495
Pineda, Paloma / García-Martínez, Antonio / Castizo-Morales, Diego	Environmental and structural analysis of cement-based vs. natural material-based grouting mortars. Results from the assessment of strengthening works	528-547
Nazzal, Munir D. / Iqbal, Md. Tanvir / Kim, Sang Soo / Abbas, Ala / Quasema, Md. Tanvir / Mogawer, Walaa	Evaluating the mechanical properties of terminal blend tire rubber mixtures incorporating RAP	427-433
Qi, Bing / Gao, Jianming / Chen, Fei / Shen, Daman	Evaluation of the damage process of recycled aggregate concrete under sulfate attack and wetting-drying cycles	254-262
Singh, M. / Sheikh, A. H. / Ali, M. S. Mohamed / Visintin, P. / Griffith, M. C.	Experimental and numerical study of the flexural behaviour of ultra-high performance fibre reinforced concrete beams	12-25
Du, Yunxing / Zhang, Mengmeng / Zhou, Fen / Zhu, Deju	Experimental study on basalt textile reinforced concrete under uniaxial tensile loading	88-100
Zhao, Shunbo / Ding, Xinxin / Zhao, Mingshuang / Li, Changyong / Pei, Songwei	Experimental study on tensile strength development of concrete with manufactured sand	247-253
Bilotta, Antonio / Ceroni, Francesca / Nigro, Emidio / Pecce, Marisa	Experimental tests on FRCM strengthening systems for tuff masonry elements	114-133
Yang, Zhengpeng / Zhang, Xuefeng / Liu, Xuan / Guan, Xuemao / Zhang, Chunjing / Niu, Yutao	Flexible and stretchable polyurethane/waterglass grouting material	240-246
Lee, Jong-Han / Cho, Baiksoon / Choi, Eunsoo	Flexural capacity of fiber reinforced concrete with a consideration of concrete strength and fiber content	222-231
Bezgin, Niyazi Ozgur	High performance concrete requirements for prefabricated high speed railway sleepers	340-351
Palla, R. / Karade, S. R. / Mishra, G. / Sharma, U. / Singh, L. P.	High strength sustainable concrete using silica nanoparticles	285-295
Sucharda, Oldrich / Pajak, Malgorzata / Ponikiewski, Tomasz / Konečný, Petr	Identification of mechanical and fracture properties of self-compacting concrete beams with different types of steel fibres using inverse analysis	263-275
Kantar, Erkan / Yuen, Terry Y. P. / Kobya, Veysel / Kuang, J. S.	Impact dynamics and energy dissipation capacity of fibre-reinforced self-compacting concrete plates	383-397
Hendi, Ali / Behravan, Amir / Mostofinejad, Davood / Moshtaghi, Seyed Mohsen / Rezayi, Kasra	Implementing ANN to minimize sewage systems concrete corrosion with glass beads substitution	441-454
Cristelo, Nuno / Cunha, Vítor M. C. F. / Topa Gomes, António / Araújo, Nuno / Miranda, Tiago / de Lurdes Lopes, Maria	Influence of fibre reinforcement on the post-cracking behaviour of a cement-stabilised sandy-clay subjected to indirect tensile stress	163-173
Yang, Datian	Investigation of the excess pore water pressure inside compacted asphalt mixture by dynamic triaxial tests	363-371
Zhang, Guixue / Yan, Yun / Hu, Zhihua / Xiao, Bo	Investigation on preparation of pyrite tailings-based mineral admixture with photocatalytic activity	26-34
Sangiorgi, Cesare / Tataranni, Piergiorgio / Simone, Andrea / Vignali, Valeria / Lantieri, Claudio / Dondi, Giulio	A laboratory and filed evaluation of Cold Recycled Mixture for base layer entirely made with Reclaimed Asphalt Pavement	232-239
Shadman, Majid / Ziari, Hassan	Laboratory evaluation of fatigue life characteristics of polymer modified porous asphalt: A dissipated energy approach	434-440
Zhou, Xiaoyong / Bhat, Prakash / Ouyang, Hui / Yu, Jiagan	Localization of cracks in cementitious materials under uniaxial tension with electrical resistance tomography	45-55
Das, Sekhar	Mechanical and water swelling properties of waste paper reinforced unsaturated polyester composites	469-478
Mokhtar, M. M. / Abo-El-Enein, S. A. / Hassaan, M. Y. / Morsy, M. S. / Khalil, M. H.	Mechanical performance, pore structure and micro-structural characteristics of graphene oxide nano platelets reinforced cement	333-339
Shakor, Pshtiwan / Sanjayan, Jay / Nazari, Ali / Nejadi, Shami	Modified 3D printed powder to cement-based material and mechanical properties of cement scaffold used in 3D printing	398-409
Grabiec, Anna M. / Starzyk, Justyna / Stefaniak, Katarzyna / Wierzbicki, Jędrzej / Zawal, Daniel	On possibility of improvement of compacted silty soils using biodeposition method	134-140
Ali, Mohamed E. / Alabdulkarem, Abdullah	On thermal characteristics and microstructure of a new insulation material extracted from date palm trees surface fibers	276-284
Hu, Xiaodi / Wang, Ning / Pan, Pan / Bai, Tao	Performance evaluation of asphalt mixture using brake pad waste as mineral filler	410-417
Li, Jiusu / Zhang, Yi / Liu, Guanlan / Peng, Xinghai	Preparation and performance evaluation of an innovative pervious concrete pavement	479-485
Yu, Bo / Liu, Jianbo / Chen, Zheng	Probabilistic evaluation method for corrosion risk of steel reinforcement based on concrete resistivity	101-113
Sitton, Jase D. / Zeinali, Yasha / Story, Brett A.	Rapid soil classification using artificial neural networks for use in constructing compressed earth blocks	214-221
Li, Qingtao / Liu, Lujie / Huang, Zhaohui / Yuan, Guanglin	Residual compressive strength of cement-based grouting material with early ages after fire	316-325
Kua, Teck-Ang / Arulrajah, Arul / Mohammadinia, Alireza / Horpibulsuk, Suksun / Mirzababaei, Mehdi	Stiffness and deformation properties of spent coffee grounds based geopolymers	79-87
García-Cuadrado, J. / Rodríguez, A. / Cuesta, I. I. / Calderón, V. / Gutiérrez-González, S.	Study and analysis by means of surface response to fracture behavior in lime-cement mortars fabricated with steelmaking slags	204-213
Cao, Chong	Transient surface permeability test: Experimental results and numerical interpretation	496-507
Mohammadi, Mohsen / Wu, Yu-Fei	Triaxial test for concrete under non-uniform passive confinement	455-468
Zhou, H. J. / Liang, X. B. / Zhang, X. L. / Lu, J. L. / Xing, F. / Mei, L.	Variation and degradation of steel and concrete bond performance with corroded stirrups	56-68
Sun, Wei / Hou, Kepeng / Yang, Zhiquan / Wen, Yiming	X-ray CT three-dimensional reconstruction and discrete element analysis of the cement paste backfill pore structure under uniaxial compression	69-78

Informations
sur cette fiche
IssueID
22618
Publié(e) le:
15.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - mai 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - mai 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.