Construction and Building Materials - November 2016

Published:	November 2016

Articles in this Issue

Author(s)	Title	Page(s)
Han, Jianguo / Wang, Kejin / Wang, Xuhao / Monteiro, Paulo J. M.	2D image analysis method for evaluating coarse aggregate characteristic and distribution in concrete	30-42
Cai, Xinhua / He, Zhen / Tang, Shengwen / Chen, Xiaorun	Abrasion erosion characteristics of concrete made with moderate heat Portland cement, fly ash and silica fume using sandblasting test	804-814
Galobardes, Isaac / Salvador, Renan P. / Cavalaro, Sergio H. P. / Figueiredo, António / Goodier, Chris I.	Adaptation of the standard EN 196-1 for mortar with accelerator	125-136
Massaad, Georges / Roziere, Emmanuel / Loukili, Ahmed / Izoret, Laurent	Advanced testing and performance specifications for the cementitious materials under external sulfate attacks	918-931
van Hille, Rob / Griffiths, Melinda	Application and verification of direct transesterification as a method to quantify fatty acids in cement and concrete	26-29
Rahman, M. M. / Chamberlain, D. A.	Application of crystallising hydrophobic mineral and curing agent to fresh concrete	945-949
Karim, Mohammad Razaul / Hashim, Huzaifa / Razak, Hashim Abdul	Assessment of pozzolanic activity of palm oil clinker powder	335-343
Al-Abdwais, Ahmed / Al-Mahaidi, Riadh	Bond behaviour between NSM CFRP laminate and concrete using modified cement-based adhesive	284-292
Mohammed, A. / Al-Saadi, N. T. K. / Al-Mahaidi, R.	Bond behaviour between NSM CFRP strips and concrete at high temperature using innovative high-strength self-compacting cementitious adhesive (IHSSC-CA) made with graphene oxide	872-883
Yang, Haifeng / Deng, Zhiheng / Ingham, Jason M.	Bond position function between corroded reinforcement and recycled aggregate concrete using beam tests	518-526
Singh, Navdeep / Singh, S. P.	Carbonation resistance and microstructural analysis of Low and High Volume Fly Ash Self Compacting Concrete containing Recycled Concrete Aggregates	828-842
Ye, Hailong / Jin, Nanguo / Jin, Xianyu / Fu, Chuanqing / Chen, Wei	Chloride ingress profiles and binding capacity of mortar in cyclic drying-wetting salt fog environments	733-742
Alava, Hugo Eguez / Tsangouri, Eleni / De Belie, Nele / De Schutter, Geert	Chloride interaction with concretes subjected to a permanent splitting tensile stress level of 65%	527-538
Asensio de Lucas, Eloy / Medina, César / Frías, Moisés / Sánchez de Rojas, María Isabel	Clay-based construction and demolition waste as a pozzolanic addition in blended cements. Effect on sulfate resistance	950-958
Güllü, Hamza	Comparison of rheological models for jet grout cement mixtures with various stabilizers	220-236
He, Z. / Tang, S. W. / Zhao, G. S. / Chen, E.	Comparison of three and one dimensional attacks of freeze-thaw and carbonation for concrete samples	596-606
Napoli, Annalisa / Realfonzo, Roberto	Compressive behavior of concrete confined by SRP wraps	993-1008
La Magna, Riccardo / Waimer, Frédéric / Knippers, Jan	Coreless Winding and Assembled Core – Novel fabrication approaches for FRP based components in building construction	1009-1016
Tošić, Nikola / Marinković, Snežana / Ignjatović, Ivan	A database on flexural and shear strength of reinforced recycled aggregate concrete beams and comparison to Eurocode 2 predictions	932-944
Xu, Fang / Peng, Chao / Zhu, Jing / Chen, Jianping	Design and evaluation of polyester fiber and SBR latex compound-modified perlite mortar with rubber powder	751-761
Lee, Kyung-Ho / Yang, Keun-Hyeok	Development of a neutral cementitious material to promote vegetation concrete	442-449
Fantilli, Alessandro P. / Chiaia, Bernardino / Gorino, Andrea	Ecological and mechanical assessment of lightweight fiber-reinforced concrete made with rubber or expanded clay aggregates	692-701
Norambuena-Contreras, J. / Serpell, R. / Valdés Vidal, G. / Gonzalez, A. / Schlangen, E.	Effect of fibres addition on the physical and mechanical properties of asphalt mixtures with crack-healing purposes by microwave radiation	369-382
Ghafari, Ehsan / Ghahari, Seyed Ali / Costa, Hugo / Júlio, Eduardo / Portugal, Antonio / Durães, Luisa	Effect of supplementary cementitious materials on autogenous shrinkage of ultra-high performance concrete	43-48
Silva, R. A. / Oliveira, D. V. / Schueremans, L. / Miranda, T. / Machado, J.	Effectiveness of the repair of unstabilised rammed earth with injection of mud grouts	861-871
Lu, Zeguang / Wang, Meng / Jia, Wanda	Effects of compression ratio on water resistant properties of biomass brick	784-803
Lu, Zeguang / Zhao, Ziyue / Wang, Meng / Jia, Wanda	Effects of corn stalk fiber content on properties of biomass brick	11-17
Lu, Zhongyu / Xian, Guijun / Li, Hui	Effects of elevated temperatures on the mechanical properties of basalt fibers and BFRP plates	1029-1036
Šeputytė-Jucikė, Jurga / Kligys, Modestas / Sinica, Marijonas	The effects of modifying additives and chemical admixtures on the properties of porous fresh and hardened cement paste	679-691
Hwang, Chao-Lung / Tran, Vu-An / Hong, Jhih-Wei / Hsieh, You-Chuan	Effects of short coconut fiber on the mechanical properties, plastic cracking behavior, and impact resistance of cementitious composites	984-992
Aydın, Ferhat	Effects of various temperatures on the mechanical strength of GFRP box profiles	843-849
Byun, Yong-Hoon / Han, WooJin / Tutumluer, Erol / Lee, Jong-Sub	Elastic wave characterization of controlled low-strength material using embedded piezoelectric transducers	210-219
Shan, Hongyou / Xu, Jinxia / Wang, Zhuyin / Jiang, Linhua / Xu, Ning	Electrochemical chloride removal in reinforced concrete structures: Improvement of effectiveness by simultaneous migration of silicate ion	344-352
Kumar, Anuj / Vlach, Tomáš / Laiblova, Lenka / Hrouda, Martin / Kasal, Bohumil / Tywoniak, Jan / Hájek, Petr	Engineered bamboo scrimber: Influence of density on the mechanical and water absorption properties	815-827
Lee, Siong Wee / Kang, Shao-Bo / Tan, Kang Hai / Yang, En-Hua	Experimental and analytical investigation on bond-slip behaviour of deformed bars embedded in engineered cementitious composites	494-503
Li, Yue / Chen, Xiaohan / Jin, Liu / Zhang, Renbo	Experimental and numerical study on chloride transmission in cracked concrete	425-435
Zhou, Jikai / Bi, Fengtong / Wang, Zhiqiang / Zhang, Jian	Experimental investigation of size effect on mechanical properties of carbon fiber reinforced polymer (CFRP) confined concrete circular specimens	643-652
Guades, Ernesto J.	Experimental investigation of the compressive and tensile strengths of geopolymer mortar: The effect of sand/fly ash (S/FA) ratio	484-493
Liu, Qiong / Xu, Qingfeng / Yu, Qiang / Gao, Rundong / Tong, Teng	Experimental investigation on mechanical and piezoresistive properties of cementitious materials containing graphene and graphene oxide nanoplatelets	565-576
Alex, Josephin / Dhanalakshmi, J. / Ambedkar, B.	Experimental investigation on rice husk ash as cement replacement on concrete production	353-362
Ma, Tao / Geng, Lei / Ding, Xunhao / Zhang, Deyu / Huang, Xiaoming	Experimental study of deicing asphalt mixture with anti-icing additives	653-662
Carrillo, Julian / Rico, Alejandro / Alcocer, Sergio	Experimental study on the mechanical properties of welded-wire meshes for concrete reinforcement in Mexico City	663-672
Ghafari, Ehsan / Feys, Dimitri / Khayat, Kamal	Feasibility of using natural SCMs in concrete for infrastructure applications	724-732
Das, Sumanta / Maroli, Amit / Neithalath, Narayanan	Finite element-based micromechanical modeling of the influence of phase properties on the elastic response of cementitious mortars	153-166
Huda, Md. Nazmul / Jumat, Mohd Zamin Bin / Islam, A. B. M. Saiful	Flexural performance of reinforced oil palm shell & palm oil clinker concrete (PSCC) beam	18-25
Phoo-ngernkham, Tanakorn / Hanjitsuwan, Sakonwan / Suksiripattanapong, Cherdsak / Thumrongvut, Jaksada / Suebsuk, Jirayut / Sookasem, Sermsak	Flexural strength of notched concrete beam filled with alkali-activated binders under different types of alkali solutions	673-678
Ranjbar, Navid / Behnia, Arash / Chai, Hwa Kian / Alengaram, U. Johnson / Jumaat, Mohd Zamin	Fracture evaluation of multi-layered precast reinforced geopolymer-concrete composite beams by incorporating acoustic emission into mechanical analysis	274-283
Sun, Yihan / Wu, Shaopeng / Liu, Quantao / Li, Bin / Fang, Hao / Ye, Qunshan	The healing properties of asphalt mixtures suffered moisture damage	418-424
Xin, Haohui / Liu, Yuqing / Mosallam, Ayman / Zhang, Youyou / Wang, Congzhe	Hygrothermal aging effects on flexural behavior of pultruded glass fiber reinforced polymer laminates in bridge applications	237-247
Samal, Sneha / Marvalová, Bohdana / Petríková, Iva / Vallons, Katleen A. M. / Lomov, Stepan V. / Rahier, Hubert	Impact and post impact behavior of fabric reinforced geopolymer composite	111-124
Kim, Jin-Man / Choi, Sun-Mi / Han, Dongyeop	Improving the mechanical properties of rapid air cooled ladle furnace slag powder by gypsum	93-101
Muhd Norhasri, M. S. / Hamidah, M. S. / Mohd Fadzil, A. / Megawati, O.	Inclusion of nano metakaolin as additive in ultra high performance concrete (UHPC)	167-175
Cunha, Sandra / Lima, Marine / Aguiar, José B.	Influence of adding phase change materials on the physical and mechanical properties of cement mortars	1-10
Arulrajah, Arul / Mohammadinia, Alireza / Horpibulsuk, Suksun / Samingthong, Wisanukorn	Influence of class F fly ash and curing temperature on strength development of fly ash-recycled concrete aggregate blends	743-750
Ghafoori, Nader / Spitek, Rebecca / Najimi, Meysam	Influence of limestone size and content on transport properties of self-consolidating concrete	588-595
Baldi-Sevilla, Alejandra / Montero, Mavis L. / Aguiar, José P. / Loría, Luis G.	Influence of nanosilica and diatomite on the physicochemical and mechanical properties of binder at unaged and oxidized conditions	176-182
Yang, Huaquan / Rao, Meijuan / Dong, Yun	Influence study of extra-large stone limited size and content on full-graded concrete properties	774-783
Lu, Zhao-Hui / Ou, Yi-Bin / Zhao, Yan-Gang / Li, Chun-Qing	Investigation of corrosion of steel stirrups in reinforced concrete structures	293-305
Li, Zhigang / Hao, Peiwen / Liu, Hongying / Xu, Jinzhi / Chen, Zhijun	Investigation of early-stage strength for cold recycled asphalt mixture using foamed asphalt	410-417
Bilir, Turhan	Investigation of performances of some empirical and composite models for predicting the modulus of elasticity of high strength concretes incorporating ground pumice and silica fume	850-860
Abu-Jdayil, Basim / Mourad, Abdel-Hamid I. / Hussain, Atif	Investigation on the mechanical behavior of polyester-scrap tire composites	896-903
Dondi, M. / Cappelletti, P. / D'Amore, M. / de Gennaro, R. / Graziano, S. F. / Langella, A. / Raimondo, M. / Zanelli, C.	Lightweight aggregates from waste materials: Reappraisal of expansion behavior and prediction schemes for bloating	394-409
Zhao, Qingxin / He, Xiaojun / Zhang, Jinrui / Jiang, Jinyang	Long-age wet curing effect on performance of carbonation resistance of fly ash concrete	577-587
Ferrier, E. / Rabinovitch, O. / Michel, L.	Mechanical behavior of concrete–resin/adhesive–FRP structural assemblies under low and high temperatures	1017-1028
Huang, Xuquan / Jiang, Mingming / Zhao, Xiaorong / Tang, Cilai	Mechanical properties and hydration mechanisms of high-strength fluorogypsum-blast furnace slag-based hydraulic cementitious binder	137-143
Ding, Yao / Dai, Jian-Guo / Shi, Cai-Jun	Mechanical properties of alkali-activated concrete: A state-of-the-art review	68-79
Abdul-Salam, Bahira / Farghaly, Ahmed Sabry / Benmokrane, Brahim	Mechanisms of shear resistance of one-way concrete slabs reinforced with FRP bars	959-970
Wei, Ya / Guo, Weiqiang / Liang, Siming	Microprestress-solidification theory-based tensile creep modeling of early-age concrete: Considering temperature and relative humidity effects	618-626
Al-Saadi, Nihad Tareq Khshain / Al-Mahaidi, Riadh	Modelling of near-surface mounted carbon fibre reinforced polymer strips embedded in concrete with cement-based adhesive	383-393
Gedik, Abdulgazi / Lav, Abdullah Hilmi	Morphological evaluation and quantitative effect of sulphuric extension on B160/220 rheological behaviour at high temperatures	457-465
Lynn, Ciarán J. / Dhir, Ravindra K. / Ghataora, Gurmel S.	Municipal incinerated bottom ash characteristics and potential for use as aggregate in concrete	504-517
Ashraf, Warda / Tian, Nannan	Nanoindentation assisted investigation on the viscoelastic behavior of carbonated cementitious matrix: Influence of loading function	904-917
Sadowski, Łukasz / Hoła, Jerzy / Czarnecki, Sławomir	Non-destructive neural identification of the bond between concrete layers in existing elements	49-58
Queiroz Krause, João / de Andrade Silva, Flávio / Ghavami, Khosrow / Gomes, Otávio da Fonseca Martins / Filho, Romildo Dias Toledo	On the influence of Dendrocalamus giganteus bamboo microstructure on its mechanical behavior	199-209
Hong, Sungnam / Kim, Hyeonjun / Park, Sun-Kyu	Optimal mix and freeze-thaw durability of polysulfide polymer concrete	539-545
Suttaphakdee, Pattaraporn / Dulsang, Nattakan / Lorwanishpaisarn, Narubeth / Kasemsiri, Pornnapa / Posi, Patcharapol / Chindaprasirt, Prinya	Optimizing mix proportion and properties of lightweight concrete incorporated phase change material paraffin/recycled concrete block composite	475-483
Mehta, Ankur / Siddique, Rafat	An overview of geopolymers derived from industrial by-products	183-198
Poletti, Elisa / Vasconcelos, Graça / Branco, Jorge M. / Koukouviki, Aikaterini M.	Performance evaluation of traditional timber joints under cyclic loading and their influence on the seismic response of timber frame structures	321-334
Fu, Xiaojie / Lai, Zhenyu / Lai, Xinchun / Lu, Zhongyuan / Lv, Shuzhen	Preparation and characteristics of magnesium phosphate cement based porous materials	712-723
Sun, Zhenping / Yang, Haijing / Shui, Liangliang / Liu, Yi / Yang, Xu / Ji, Yanliang / Hu, Kuangyi / Luo, Qiong	Preparation of polycarboxylate-based grinding aid and its influence on cement properties under laboratory condition	363-368
Posi, Patcharapol / Thongjapo, Pearploy / Thamultree, Natakorn / Boontee, Phongsathon / Kasemsiri, Pornnapa / Chindaprasirt, Prinya	Pressed lightweight fly ash-OPC geopolymer concrete containing recycled lightweight concrete aggregate	450-456
Tekin, Ilker	Properties of NaOH activated geopolymer with marble, travertine and volcanic tuff wastes	607-617
Cheng, Shukai / Shui, Zhonghe / Li, Qiu / Sun, Tao / Yang, Ronghui	Properties, microstructure and hydration products of lightweight aggregate concrete with metakaolin and slag addition	59-67
Francesconi, Lorena / Pani, Luisa / Stochino, Flavio	Punching shear strength of reinforced recycled concrete slabs	248-263
Al-Tulaian, B. S. / Al-Shannag, M. J. / Al-Hozaimy, A. R.	Recycled plastic waste fibers for reinforcing Portland cement mortar	102-110
Kianfar, Ehsan / Toufigh, Vahab	Reliability analysis of rammed earth structures	884-895
Ekolu, S. O.	A review on effects of curing, sheltering, and CO 2 concentration upon natural carbonation of concrete	306-320
Jang, J. G. / Kim, G. M. / Kim, H. J. / Lee, H. K.	Review on recent advances in CO 2 utilization and sequestration technologies in cement-based materials	762-773
Sherir, Mohamed A. A. / Hossain, Khandaker M. A. / Lachemi, Mohamed	Self-healing and expansion characteristics of cementitious composites with high volume fly ash and MgO-type expansive agent	80-92
Akinyemi, A. Banjo / Afolayan, J. O. / Ogunji Oluwatobi, E.	Some properties of composite corn cob and sawdust particle boards	436-441
Singh, Gurpreet / Siddique, Rafat	Strength properties and micro-structural analysis of self-compacting concrete made with iron slag as partial replacement of fine aggregates	144-152
Bernal, J. / Fenaux, M. / Moragues, A. / Reyes, E. / Gálvez, J. C.	Study of chloride penetration in concretes exposed to high-mountain weather conditions with presence of deicing salts	971-983
Mohyeddin, Alireza / Gad, Emad F. / Yangdon, Kinley / Khandu, Rinchen / Lee, Jessey	Tensile load capacity of screw anchors in early age concrete	702-711
Zhang, Lei / Xing, Chao / Gao, Fei / Li, Tian-shuai / Tan, Yi-qiu	Using DSR and MSCR tests to characterize high temperature performance of different rubber modified asphalt	466-474
Zarembski, Allan M. / Einbinder, Daniel / Attoh-Okine, Nii	Using multiple adaptive regression to address the impact of track geometry on development of rail defects	546-555
Kizinievič, Olga / Kizinievič, Viktor	Utilisation of wood ash from biomass for the production of ceramic products	264-273
Zhu, Xingyi / Yuan, Ying / Li, Lihan / Liu, Dong / Ling, Jianming	Utilize nano-scale metrology techniques to investigate mechanical, structural, and chemical heterogeneity of mixtures contained incineration bottom ash aggregate	627-642
Yu, Yening / Yu, Jishou / Ge, Yong	Water and chloride permeability research on ordinary cement mortar and concrete with compound admixture and fly ash	556-564

About this
data sheet
IssueID
22602
Published on:
14/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - November 2016

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - November 2016

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.