Construction and Building Materials - novembre 2016

Publié:	novembre 2016

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Han, Jianguo / Wang, Kejin / Wang, Xuhao / Monteiro, Paulo J. M.	2D image analysis method for evaluating coarse aggregate characteristic and distribution in concrete	30-42
Cai, Xinhua / He, Zhen / Tang, Shengwen / Chen, Xiaorun	Abrasion erosion characteristics of concrete made with moderate heat Portland cement, fly ash and silica fume using sandblasting test	804-814
Galobardes, Isaac / Salvador, Renan P. / Cavalaro, Sergio H. P. / Figueiredo, António / Goodier, Chris I.	Adaptation of the standard EN 196-1 for mortar with accelerator	125-136
Massaad, Georges / Roziere, Emmanuel / Loukili, Ahmed / Izoret, Laurent	Advanced testing and performance specifications for the cementitious materials under external sulfate attacks	918-931
van Hille, Rob / Griffiths, Melinda	Application and verification of direct transesterification as a method to quantify fatty acids in cement and concrete	26-29
Rahman, M. M. / Chamberlain, D. A.	Application of crystallising hydrophobic mineral and curing agent to fresh concrete	945-949
Karim, Mohammad Razaul / Hashim, Huzaifa / Razak, Hashim Abdul	Assessment of pozzolanic activity of palm oil clinker powder	335-343
Al-Abdwais, Ahmed / Al-Mahaidi, Riadh	Bond behaviour between NSM CFRP laminate and concrete using modified cement-based adhesive	284-292
Mohammed, A. / Al-Saadi, N. T. K. / Al-Mahaidi, R.	Bond behaviour between NSM CFRP strips and concrete at high temperature using innovative high-strength self-compacting cementitious adhesive (IHSSC-CA) made with graphene oxide	872-883
Yang, Haifeng / Deng, Zhiheng / Ingham, Jason M.	Bond position function between corroded reinforcement and recycled aggregate concrete using beam tests	518-526
Singh, Navdeep / Singh, S. P.	Carbonation resistance and microstructural analysis of Low and High Volume Fly Ash Self Compacting Concrete containing Recycled Concrete Aggregates	828-842
Ye, Hailong / Jin, Nanguo / Jin, Xianyu / Fu, Chuanqing / Chen, Wei	Chloride ingress profiles and binding capacity of mortar in cyclic drying-wetting salt fog environments	733-742
Alava, Hugo Eguez / Tsangouri, Eleni / De Belie, Nele / De Schutter, Geert	Chloride interaction with concretes subjected to a permanent splitting tensile stress level of 65%	527-538
Asensio de Lucas, Eloy / Medina, César / Frías, Moisés / Sánchez de Rojas, María Isabel	Clay-based construction and demolition waste as a pozzolanic addition in blended cements. Effect on sulfate resistance	950-958
Güllü, Hamza	Comparison of rheological models for jet grout cement mixtures with various stabilizers	220-236
He, Z. / Tang, S. W. / Zhao, G. S. / Chen, E.	Comparison of three and one dimensional attacks of freeze-thaw and carbonation for concrete samples	596-606
Napoli, Annalisa / Realfonzo, Roberto	Compressive behavior of concrete confined by SRP wraps	993-1008
La Magna, Riccardo / Waimer, Frédéric / Knippers, Jan	Coreless Winding and Assembled Core – Novel fabrication approaches for FRP based components in building construction	1009-1016
Tošić, Nikola / Marinković, Snežana / Ignjatović, Ivan	A database on flexural and shear strength of reinforced recycled aggregate concrete beams and comparison to Eurocode 2 predictions	932-944
Xu, Fang / Peng, Chao / Zhu, Jing / Chen, Jianping	Design and evaluation of polyester fiber and SBR latex compound-modified perlite mortar with rubber powder	751-761
Lee, Kyung-Ho / Yang, Keun-Hyeok	Development of a neutral cementitious material to promote vegetation concrete	442-449
Fantilli, Alessandro P. / Chiaia, Bernardino / Gorino, Andrea	Ecological and mechanical assessment of lightweight fiber-reinforced concrete made with rubber or expanded clay aggregates	692-701
Norambuena-Contreras, J. / Serpell, R. / Valdés Vidal, G. / Gonzalez, A. / Schlangen, E.	Effect of fibres addition on the physical and mechanical properties of asphalt mixtures with crack-healing purposes by microwave radiation	369-382
Ghafari, Ehsan / Ghahari, Seyed Ali / Costa, Hugo / Júlio, Eduardo / Portugal, Antonio / Durães, Luisa	Effect of supplementary cementitious materials on autogenous shrinkage of ultra-high performance concrete	43-48
Silva, R. A. / Oliveira, D. V. / Schueremans, L. / Miranda, T. / Machado, J.	Effectiveness of the repair of unstabilised rammed earth with injection of mud grouts	861-871
Lu, Zeguang / Wang, Meng / Jia, Wanda	Effects of compression ratio on water resistant properties of biomass brick	784-803
Lu, Zeguang / Zhao, Ziyue / Wang, Meng / Jia, Wanda	Effects of corn stalk fiber content on properties of biomass brick	11-17
Lu, Zhongyu / Xian, Guijun / Li, Hui	Effects of elevated temperatures on the mechanical properties of basalt fibers and BFRP plates	1029-1036
Šeputytė-Jucikė, Jurga / Kligys, Modestas / Sinica, Marijonas	The effects of modifying additives and chemical admixtures on the properties of porous fresh and hardened cement paste	679-691
Hwang, Chao-Lung / Tran, Vu-An / Hong, Jhih-Wei / Hsieh, You-Chuan	Effects of short coconut fiber on the mechanical properties, plastic cracking behavior, and impact resistance of cementitious composites	984-992
Aydın, Ferhat	Effects of various temperatures on the mechanical strength of GFRP box profiles	843-849
Byun, Yong-Hoon / Han, WooJin / Tutumluer, Erol / Lee, Jong-Sub	Elastic wave characterization of controlled low-strength material using embedded piezoelectric transducers	210-219
Shan, Hongyou / Xu, Jinxia / Wang, Zhuyin / Jiang, Linhua / Xu, Ning	Electrochemical chloride removal in reinforced concrete structures: Improvement of effectiveness by simultaneous migration of silicate ion	344-352
Kumar, Anuj / Vlach, Tomáš / Laiblova, Lenka / Hrouda, Martin / Kasal, Bohumil / Tywoniak, Jan / Hájek, Petr	Engineered bamboo scrimber: Influence of density on the mechanical and water absorption properties	815-827
Lee, Siong Wee / Kang, Shao-Bo / Tan, Kang Hai / Yang, En-Hua	Experimental and analytical investigation on bond-slip behaviour of deformed bars embedded in engineered cementitious composites	494-503
Li, Yue / Chen, Xiaohan / Jin, Liu / Zhang, Renbo	Experimental and numerical study on chloride transmission in cracked concrete	425-435
Zhou, Jikai / Bi, Fengtong / Wang, Zhiqiang / Zhang, Jian	Experimental investigation of size effect on mechanical properties of carbon fiber reinforced polymer (CFRP) confined concrete circular specimens	643-652
Guades, Ernesto J.	Experimental investigation of the compressive and tensile strengths of geopolymer mortar: The effect of sand/fly ash (S/FA) ratio	484-493
Liu, Qiong / Xu, Qingfeng / Yu, Qiang / Gao, Rundong / Tong, Teng	Experimental investigation on mechanical and piezoresistive properties of cementitious materials containing graphene and graphene oxide nanoplatelets	565-576
Alex, Josephin / Dhanalakshmi, J. / Ambedkar, B.	Experimental investigation on rice husk ash as cement replacement on concrete production	353-362
Ma, Tao / Geng, Lei / Ding, Xunhao / Zhang, Deyu / Huang, Xiaoming	Experimental study of deicing asphalt mixture with anti-icing additives	653-662
Carrillo, Julian / Rico, Alejandro / Alcocer, Sergio	Experimental study on the mechanical properties of welded-wire meshes for concrete reinforcement in Mexico City	663-672
Ghafari, Ehsan / Feys, Dimitri / Khayat, Kamal	Feasibility of using natural SCMs in concrete for infrastructure applications	724-732
Das, Sumanta / Maroli, Amit / Neithalath, Narayanan	Finite element-based micromechanical modeling of the influence of phase properties on the elastic response of cementitious mortars	153-166
Huda, Md. Nazmul / Jumat, Mohd Zamin Bin / Islam, A. B. M. Saiful	Flexural performance of reinforced oil palm shell & palm oil clinker concrete (PSCC) beam	18-25
Phoo-ngernkham, Tanakorn / Hanjitsuwan, Sakonwan / Suksiripattanapong, Cherdsak / Thumrongvut, Jaksada / Suebsuk, Jirayut / Sookasem, Sermsak	Flexural strength of notched concrete beam filled with alkali-activated binders under different types of alkali solutions	673-678
Ranjbar, Navid / Behnia, Arash / Chai, Hwa Kian / Alengaram, U. Johnson / Jumaat, Mohd Zamin	Fracture evaluation of multi-layered precast reinforced geopolymer-concrete composite beams by incorporating acoustic emission into mechanical analysis	274-283
Sun, Yihan / Wu, Shaopeng / Liu, Quantao / Li, Bin / Fang, Hao / Ye, Qunshan	The healing properties of asphalt mixtures suffered moisture damage	418-424
Xin, Haohui / Liu, Yuqing / Mosallam, Ayman / Zhang, Youyou / Wang, Congzhe	Hygrothermal aging effects on flexural behavior of pultruded glass fiber reinforced polymer laminates in bridge applications	237-247
Samal, Sneha / Marvalová, Bohdana / Petríková, Iva / Vallons, Katleen A. M. / Lomov, Stepan V. / Rahier, Hubert	Impact and post impact behavior of fabric reinforced geopolymer composite	111-124
Kim, Jin-Man / Choi, Sun-Mi / Han, Dongyeop	Improving the mechanical properties of rapid air cooled ladle furnace slag powder by gypsum	93-101
Muhd Norhasri, M. S. / Hamidah, M. S. / Mohd Fadzil, A. / Megawati, O.	Inclusion of nano metakaolin as additive in ultra high performance concrete (UHPC)	167-175
Cunha, Sandra / Lima, Marine / Aguiar, José B.	Influence of adding phase change materials on the physical and mechanical properties of cement mortars	1-10
Arulrajah, Arul / Mohammadinia, Alireza / Horpibulsuk, Suksun / Samingthong, Wisanukorn	Influence of class F fly ash and curing temperature on strength development of fly ash-recycled concrete aggregate blends	743-750
Ghafoori, Nader / Spitek, Rebecca / Najimi, Meysam	Influence of limestone size and content on transport properties of self-consolidating concrete	588-595
Baldi-Sevilla, Alejandra / Montero, Mavis L. / Aguiar, José P. / Loría, Luis G.	Influence of nanosilica and diatomite on the physicochemical and mechanical properties of binder at unaged and oxidized conditions	176-182
Yang, Huaquan / Rao, Meijuan / Dong, Yun	Influence study of extra-large stone limited size and content on full-graded concrete properties	774-783
Lu, Zhao-Hui / Ou, Yi-Bin / Zhao, Yan-Gang / Li, Chun-Qing	Investigation of corrosion of steel stirrups in reinforced concrete structures	293-305
Li, Zhigang / Hao, Peiwen / Liu, Hongying / Xu, Jinzhi / Chen, Zhijun	Investigation of early-stage strength for cold recycled asphalt mixture using foamed asphalt	410-417
Bilir, Turhan	Investigation of performances of some empirical and composite models for predicting the modulus of elasticity of high strength concretes incorporating ground pumice and silica fume	850-860
Abu-Jdayil, Basim / Mourad, Abdel-Hamid I. / Hussain, Atif	Investigation on the mechanical behavior of polyester-scrap tire composites	896-903
Dondi, M. / Cappelletti, P. / D'Amore, M. / de Gennaro, R. / Graziano, S. F. / Langella, A. / Raimondo, M. / Zanelli, C.	Lightweight aggregates from waste materials: Reappraisal of expansion behavior and prediction schemes for bloating	394-409
Zhao, Qingxin / He, Xiaojun / Zhang, Jinrui / Jiang, Jinyang	Long-age wet curing effect on performance of carbonation resistance of fly ash concrete	577-587
Ferrier, E. / Rabinovitch, O. / Michel, L.	Mechanical behavior of concrete–resin/adhesive–FRP structural assemblies under low and high temperatures	1017-1028
Huang, Xuquan / Jiang, Mingming / Zhao, Xiaorong / Tang, Cilai	Mechanical properties and hydration mechanisms of high-strength fluorogypsum-blast furnace slag-based hydraulic cementitious binder	137-143
Ding, Yao / Dai, Jian-Guo / Shi, Cai-Jun	Mechanical properties of alkali-activated concrete: A state-of-the-art review	68-79
Abdul-Salam, Bahira / Farghaly, Ahmed Sabry / Benmokrane, Brahim	Mechanisms of shear resistance of one-way concrete slabs reinforced with FRP bars	959-970
Wei, Ya / Guo, Weiqiang / Liang, Siming	Microprestress-solidification theory-based tensile creep modeling of early-age concrete: Considering temperature and relative humidity effects	618-626
Al-Saadi, Nihad Tareq Khshain / Al-Mahaidi, Riadh	Modelling of near-surface mounted carbon fibre reinforced polymer strips embedded in concrete with cement-based adhesive	383-393
Gedik, Abdulgazi / Lav, Abdullah Hilmi	Morphological evaluation and quantitative effect of sulphuric extension on B160/220 rheological behaviour at high temperatures	457-465
Lynn, Ciarán J. / Dhir, Ravindra K. / Ghataora, Gurmel S.	Municipal incinerated bottom ash characteristics and potential for use as aggregate in concrete	504-517
Ashraf, Warda / Tian, Nannan	Nanoindentation assisted investigation on the viscoelastic behavior of carbonated cementitious matrix: Influence of loading function	904-917
Sadowski, Łukasz / Hoła, Jerzy / Czarnecki, Sławomir	Non-destructive neural identification of the bond between concrete layers in existing elements	49-58
Queiroz Krause, João / de Andrade Silva, Flávio / Ghavami, Khosrow / Gomes, Otávio da Fonseca Martins / Filho, Romildo Dias Toledo	On the influence of Dendrocalamus giganteus bamboo microstructure on its mechanical behavior	199-209
Hong, Sungnam / Kim, Hyeonjun / Park, Sun-Kyu	Optimal mix and freeze-thaw durability of polysulfide polymer concrete	539-545
Suttaphakdee, Pattaraporn / Dulsang, Nattakan / Lorwanishpaisarn, Narubeth / Kasemsiri, Pornnapa / Posi, Patcharapol / Chindaprasirt, Prinya	Optimizing mix proportion and properties of lightweight concrete incorporated phase change material paraffin/recycled concrete block composite	475-483
Mehta, Ankur / Siddique, Rafat	An overview of geopolymers derived from industrial by-products	183-198
Poletti, Elisa / Vasconcelos, Graça / Branco, Jorge M. / Koukouviki, Aikaterini M.	Performance evaluation of traditional timber joints under cyclic loading and their influence on the seismic response of timber frame structures	321-334
Fu, Xiaojie / Lai, Zhenyu / Lai, Xinchun / Lu, Zhongyuan / Lv, Shuzhen	Preparation and characteristics of magnesium phosphate cement based porous materials	712-723
Sun, Zhenping / Yang, Haijing / Shui, Liangliang / Liu, Yi / Yang, Xu / Ji, Yanliang / Hu, Kuangyi / Luo, Qiong	Preparation of polycarboxylate-based grinding aid and its influence on cement properties under laboratory condition	363-368
Posi, Patcharapol / Thongjapo, Pearploy / Thamultree, Natakorn / Boontee, Phongsathon / Kasemsiri, Pornnapa / Chindaprasirt, Prinya	Pressed lightweight fly ash-OPC geopolymer concrete containing recycled lightweight concrete aggregate	450-456
Tekin, Ilker	Properties of NaOH activated geopolymer with marble, travertine and volcanic tuff wastes	607-617
Cheng, Shukai / Shui, Zhonghe / Li, Qiu / Sun, Tao / Yang, Ronghui	Properties, microstructure and hydration products of lightweight aggregate concrete with metakaolin and slag addition	59-67
Francesconi, Lorena / Pani, Luisa / Stochino, Flavio	Punching shear strength of reinforced recycled concrete slabs	248-263
Al-Tulaian, B. S. / Al-Shannag, M. J. / Al-Hozaimy, A. R.	Recycled plastic waste fibers for reinforcing Portland cement mortar	102-110
Kianfar, Ehsan / Toufigh, Vahab	Reliability analysis of rammed earth structures	884-895
Ekolu, S. O.	A review on effects of curing, sheltering, and CO 2 concentration upon natural carbonation of concrete	306-320
Jang, J. G. / Kim, G. M. / Kim, H. J. / Lee, H. K.	Review on recent advances in CO 2 utilization and sequestration technologies in cement-based materials	762-773
Sherir, Mohamed A. A. / Hossain, Khandaker M. A. / Lachemi, Mohamed	Self-healing and expansion characteristics of cementitious composites with high volume fly ash and MgO-type expansive agent	80-92
Akinyemi, A. Banjo / Afolayan, J. O. / Ogunji Oluwatobi, E.	Some properties of composite corn cob and sawdust particle boards	436-441
Singh, Gurpreet / Siddique, Rafat	Strength properties and micro-structural analysis of self-compacting concrete made with iron slag as partial replacement of fine aggregates	144-152
Bernal, J. / Fenaux, M. / Moragues, A. / Reyes, E. / Gálvez, J. C.	Study of chloride penetration in concretes exposed to high-mountain weather conditions with presence of deicing salts	971-983
Mohyeddin, Alireza / Gad, Emad F. / Yangdon, Kinley / Khandu, Rinchen / Lee, Jessey	Tensile load capacity of screw anchors in early age concrete	702-711
Zhang, Lei / Xing, Chao / Gao, Fei / Li, Tian-shuai / Tan, Yi-qiu	Using DSR and MSCR tests to characterize high temperature performance of different rubber modified asphalt	466-474
Zarembski, Allan M. / Einbinder, Daniel / Attoh-Okine, Nii	Using multiple adaptive regression to address the impact of track geometry on development of rail defects	546-555
Kizinievič, Olga / Kizinievič, Viktor	Utilisation of wood ash from biomass for the production of ceramic products	264-273
Zhu, Xingyi / Yuan, Ying / Li, Lihan / Liu, Dong / Ling, Jianming	Utilize nano-scale metrology techniques to investigate mechanical, structural, and chemical heterogeneity of mixtures contained incineration bottom ash aggregate	627-642
Yu, Yening / Yu, Jishou / Ge, Yong	Water and chloride permeability research on ordinary cement mortar and concrete with compound admixture and fly ash	556-564

Informations
sur cette fiche
IssueID
22602
Publié(e) le:
14.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - novembre 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - novembre 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.