Construction and Building Materials - October 2016

Published:	October 2016

Articles in this Issue

Author(s)	Title	Page(s)
Prem, Prabhat Ranjan / Murthy, A. Ramachandra	Acoustic emission and flexural behaviour of RC beams strengthened with UHPC overlay	481-492
Frigio, F. / Raschia, S. / Steiner, D. / Hofko, B. / Canestrari, F.	Aging effects on recycled WMA porous asphalt mixtures	712-718
Ronald, Mercado / Luis, Fuentes Pumarejo	Asphalt emulsions formulation: State-of-the-art and dependency of formulation on emulsions properties	162-173
Ceroni, Francesca / Cuzzilla, Roberto / Pecce, Marisa	Assessment of performance of steel and GFRP bars as injected anchors in masonry walls	78-98
Shukri, A. A. / Hosen, M. A. / Muhamad, R. / Jumaat, M. Z.	Behaviour of precracked RC beams strengthened using the side-NSM technique	617-626
Mertoğlu, Çelebi / Anil, Özgür / Durucan, Cengizhan	Bond slip behavior of anchored CFRP strips on concrete surfaces	553-564
Cui, P. Q. / Zhou, H. G. / Li, C. / Wu, S. P. / Xiao, Y.	Characteristics of using layered double hydroxides to reduce the VOCs from bituminous materials	69-77
Sola, Ozlem Celik / Sayin, Baris	Characterization of ground slag and borax waste and their effects on the compressive strength of briquettes	727-733
Corinaldesi, Valeria / Mazzoli, Alida / Siddique, Rafat	Characterization of lightweight mortars containing wood processing by-products waste	281-289
Sun, Yiren / Huang, Baoshan / Chen, Jingyun / Jia, Xiaoyang / Ding, Yongjie	Characterizing rheological behavior of asphalt binder over a complete range of pavement service loading frequency and temperature	661-672
Tang, Naipeng / Huang, Weidong / Xiao, Feipeng	Chemical and rheological investigation of high-cured crumb rubber-modified asphalt	847-854
Da, Bo / Yu, Hongfa / Ma, Haiyan / Tan, Yongshan / Mi, Renjie / Dou, Xuemei	Chloride diffusion study of coral concrete in a marine environment	47-58
López, Anahí / Guzmán, Gastón Alejandro / Di Sarli, Alejandro Ramón	Color stability in mortars and concretes. Part 2: Study on architectural concretes	248-253
Li, Xuelian / Zhou, Zhigang / You, Zhanping	Compaction temperatures of Sasobit produced warm mix asphalt mixtures modified with SBS	357-364
Chandrappa, Anush K. / Biligiri, Krishna Prapoorna	Comprehensive investigation of permeability characteristics of pervious concrete: A hydrodynamic approach	627-637
Rezaifar, Omid / Hasanzadeh, Mohsen / Gholhaki, Majid	Concrete made with hybrid blends of crumb rubber and metakaolin: Optimization using Response Surface Method	59-68
Li, Pengda / Wu, Yu-Fei / Gravina, Rebecca	Cyclic response of FRP-confined concrete with post-peak strain softening behavior	814-828
Jiabin, Wang / Ditao, Niu / Zhanping, Song	Damage layer thickness and formation mechanism of shotcrete with and without steel fiber under sulfate corrosion of dry–wet cycles by ultrasound plane testing method	346-356
Mostofinejad, Davood / Nikoo, Mojtaba Rostami / Hosseini, Seyed Arman	Determination of optimized mix design and curing conditions of reactive powder concrete (RPC)	754-767
Kabir, M. H. / Fawzia, S. / Chan, T. H. T.	Durability of CFRP strengthened circular hollow steel members under cold weather: Experimental and numerical investigation	372-383
Urbonas, L. / Leno, V. / Heinz, D.	Effect of carbonation in supercritical CO 2 on the properties of hardened cement paste of different alkalinity	704-711
Aliabdo, Ali A. / Abd Elmoaty, Abd Elmoaty M. / Salem, Hazem A.	Effect of cement addition, solution resting time and curing characteristics on fly ash based geopolymer concrete performance	581-593
Schneider, Nick / Stephan, Dietmar	The effect of d -gluconic acid as a retarder of ground granulated blast-furnace slag pastes	99-105
Zhang, Duo / Shao, Yixin	Effect of early carbonation curing on chloride penetration and weathering carbonation in concrete	516-526
Herrero, Tamara / Vegas, Iñigo J. / Santamaria, Amaia / San-José, José T. / Skaf, Marta	Effect of high-alumina ladle furnace slag as cement substitution in masonry mortars	404-413
Song, Chiwon / Choi, Young Cheol / Choi, Seongcheol	Effect of internal curing by superabsorbent polymers – Internal relative humidity and autogenous shrinkage of alkali-activated slag mortars	198-206
Saba, N. / Paridah, M. T. / Abdan, K. / Ibrahim, N. A.	Effect of oil palm nano filler on mechanical and morphological properties of kenaf reinforced epoxy composites	15-26
Ma, Cong / Chen, Bing / Chen, Longzhu	Effect of organic matter on strength development of self-compacting earth-based construction stabilized with cement-based composites	414-423
Chen, Ruoyu / Li, Yuanbing / Xiang, Ruofei / Li, Shujing	Effect of particle size of fly ash on the properties of lightweight insulation materials	120-126
Shanahan, Natallia / Tran, Victor / Williams, Andrew / Zayed, A.	Effect of SCM combinations on paste rheology and its relationship to particle characteristics of the mixture	745-753
Cong, Peiliang / Liu, Ning / Tian, Yu / Zhang, Yihan	Effects of long-term aging on the properties of asphalt binder containing diatoms	534-540
Karamloo, Mohammad / Mazloom, Moosa / Payganeh, Gholamhasan	Effects of maximum aggregate size on fracture behaviors of self-compacting lightweight concrete	508-515
Sacramento Aragão, Francisco Thiago / Pazos, Abraham Ricardo Guerrero / Motta, Laura Maria Goretti da / Kim, Yong-Rak / Nascimento, Luis Alberto Herrmann do	Effects of morphological characteristics of aggregate particles on the mechanical behavior of bituminous paving mixtures	444-453
Coppola, Luigi / Buoso, Alessandra / Coffetti, Denny / Kara, Patricia / Lorenzi, Sergio	Electric arc furnace granulated slag for sustainable concrete	115-119
Kim, Heeae / Koh, Taehoon / Pyo, Sukhoon	Enhancing flowability and sustainability of ultra high performance concrete incorporating high replacement levels of industrial slags	153-160
Saha, Ashish Kumer / Sarker, Prabir Kumar	Expansion due to alkali-silica reaction of ferronickel slag fine aggregate in OPC and blended cement mortars	135-142
Tran, Van-Dang / Oudjene, Marc / Méausoone, Pierre-Jean	Experimental investigation on full-scale glued oak solid timber beams for structural bearing capacity	365-371
Lu, Xuan / Chen, Bing	Experimental study of magnesium phosphate cements modified by metakaolin	719-726
Xiao, Lianzhen / Ren, Zheng / Shi, Wenchong / Wei, Xiaosheng	Experimental study on chloride permeability in concrete by non-contact electrical resistivity measurement and RCM	27-34
Sharma, Snigdha / Kothiyal, N. C.	Facile growth of carbon nanotubes coated with carbon nanoparticles: A potential low-cost hybrid nanoadditive for improved mechanical, electrical, microstructural and crystalline properties of cement mortar matrix	829-846
Konkol, Janusz / Prokopski, Grzegorz	Fracture toughness and fracture surfaces morphology of metakaolinite-modified concrete	638-648
Sá Ribeiro, Ruy A. / Sá Ribeiro, Marilene G. / Sankar, Kaushik / Kriven, Waltraud M.	Geopolymer-bamboo composite – A novel sustainable construction material	501-507
Ježová, Jana / Mertens, Laurence / Lambot, Sébastien	Ground-penetrating radar for observing tree trunks and other cylindrical objects	214-225
Niry Razafinjato, Rijaniaina / Beaucour, Anne-Lise / Hebert, Ronan L. / Ledésert, Béatrice / Bodet, Raphaël / Noumowé, Albert	High temperature behaviour of a wide petrographic range of siliceous and calcareous aggregates for concretes	261-273
Yahaghi, Javad / Muda, Zakaria Che / Beddu, Salmia Bnt	Impact resistance of oil palm shells concrete reinforced with polypropylene fibre	394-403
Asadollahi, S. / Saeedian, A. / Dehestani, M. / Zahedi, F.	Improved compressive fracture models for self-consolidating concrete (SCC)	473-480
Oruç, Şeref / Yılmaz, Bahadır	Improvement in performance properties of asphalt using a novel boron-containing additive	207-213
Assi, Lateef / Ghahari, SeyedAli / Deaver, Edward (Eddie) / Leaphart, Davis / Ziehl, Paul	Improvement of the early and final compressive strength of fly ash-based geopolymer concrete at ambient conditions	806-813
Li, Xiangyu / Habibnejad korayem, Asghar / Li, Chenyang / Liu, Yanming / He, Hongsen / Sanjayan, Jay G. / Duan, Wen Hui	Incorporation of graphene oxide and silica fume into cement paste: A study of dispersion and compressive strength	327-335
Qiang, Wang / Mengxiao, Shi / Jun, Yang	Influence of classified steel slag with particle sizes smaller than 20 μm on the properties of cement and concrete	601-610
Assaedi, H. / Shaikh, F. U. A. / Low, I. M.	Influence of mixing methods of nano silica on the microstructural and mechanical properties of flax fabric reinforced geopolymer composites	541-552
Silva, J. V. / Ismael, R. / Carmo, R. N. F. / Lourenço, C. / Soldado, E. / Costa, H. / Júlio, E.	Influence of nano-SiO 2 and nano-Al 2 O 3 additions on the shear strength and the bending moment capacity of RC beams	35-46
Zhang, Canlin / Yu, Jianying / Xu, Song / Xue, Lihui / Cao, Zhilong	Influence of UV aging on the rheological properties of bitumen modified with surface organic layered double hydroxides	574-580
Choi, Hajin / Ham, Youngjib / Popovics, John S.	Integrated visualization for reinforced concrete using ultrasonic tomography and image-based 3-D reconstruction	384-393
Said, A. M. / Quiroz, O. I. / Hatchett, D. W. / ElGawady, M.	Latex-modified concrete overlays using waste paint	191-197
Kaffetzakis, Michael / Papanicolaou, Catherine (Corina)	Lightweight Aggregate Self-Compacting Concrete (LWASCC) semi-automated mix design methodology	254-260
Roman, Claudia / Cuadri, Antonio A. / Liashenko, Ievgenii / García-Morales, Moisés / Partal, Pedro	Linear and non-linear viscoelastic behavior of SBS and LDPE modified bituminous mastics	464-472
Choi, Soo-Kyung / Kang, Yong-Hak / Yokoyama, Yutaka / Mikami, Takamasa	Load characteristics based on loading conditions of large soft body used for impact resistance testing of lightweight wall	8-14
Tadayon, Mohammad Hosein / Shekarchi, Mohammad / Tadayon, Mohsen	Long-term field study of chloride ingress in concretes containing pozzolans exposed to severe marine tidal zone	611-616
Quattrone, M. / Cazacliu, B. / Angulo, S. C. / Hamard, E. / Cothenet, A.	Measuring the water absorption of recycled aggregates, what is the best practice for concrete production?	690-703
Quadir, Upal Mohammad Towfiqul / Islam, Kamrul / Billah, A. H. M. Muntasir / Shahria Alam, M.	Mechanical and durability properties of concrete using recycled granulated steel	174-183
Lu, Chunhua / Yuan, Siqi / Cheng, Pu / Liu, Ronggui	Mechanical properties of corroded steel bars in pre-cracked concrete suffering from chloride attack	649-660
Gurumoorthy, N. / Arunachalam, K.	Micro and mechanical behaviour of Treated Used Foundry Sand concrete	184-190
Saride, Sireesh / Avirneni, Deepti / Challapalli, Subrahmanyam	Micro-mechanical interaction of activated fly ash mortar and reclaimed asphalt pavement materials	424-435
Li, Shuangxin	Microstructure and composition characterisation of three 20-year-old GGBS-OPC blended pastes	226-234
Hilloulin, Benoit / Legland, Jean-Baptiste / Lys, Elisabeth / Abraham, Odile / Loukili, Ahmed / Grondin, Frédéric / Durand, Olivier / Tournat, Vincent	Monitoring of autogenous crack healing in cementitious materials by the nonlinear modulation of ultrasonic coda waves, 3D microscopy and X-ray microtomography	143-152
Rattanadecho, Phadungsak / Makul, Natt / Pichaicherd, Aumpol / Chanamai, Porncharoen / Rungroungdouyboon, Bunyong	A novel rapid microwave-thermal process for accelerated curing of concrete: Prototype design, optimal process and experimental investigations	768-784
Yang, Wenfeng / Xue, Yongjie / Wu, Shaopeng / Xiao, Yue / Zhou, Min	Performance investigation and environmental application of basic oxygen furnace slag – Rice husk ash based composite cementitious materials	493-500
Cho, Bongsuk / Choi, Hyeonggil	Physical and chemical properties of concrete using GGBFS-KR slag-gypsum binder	436-443
Sadrossadat, Ehsan / Heidaripanah, Ali / Osouli, Saeedeh	Prediction of the resilient modulus of flexible pavement subgrade soils using adaptive neuro-fuzzy inference systems	235-247
Ma, Cong / Chen, Bing	Properties of foamed concrete containing water repellents	106-114
Wang, Yu / Shao, Yixin / Matovic, Miodrag Darko / Whalen, Joann K.	Recycling combustion ash for sustainable cement production: A critical review with data-mining and time-series predictive models	673-689
Contreras, M. / Teixeira, S. R. / Lucas, M. C. / Lima, L. C. N. / Cardoso, D. S. L. / da Silva, G. A. C. / Gregório, G. C. / de Souza, A. E. / dos Santos, A.	Recycling of construction and demolition waste for producing new construction material (Brazil case-study)	594-600
Shen, Dejian / Shi, Xiang / Zhu, Shuaishuai / Duan, Xiaofang / Zhang, Jinyang	Relationship between tensile Young's modulus and strength of fly ash high strength concrete at early age	317-326
Dong, Wei / Shen, Xiang-dong / Xue, Hui-jun / He, Jing / Liu, Yu	Research on the freeze-thaw cyclic test and damage model of Aeolian sand lightweight aggregate concrete	792-799
Ait Mohamed Amer, Adem / Ezziane, Karim / Bougara, Abdelkader / Adjoudj, M'hamed	Rheological and mechanical behavior of concrete made with pre-saturated and dried recycled concrete aggregates	300-308
Lei, Zhang / Tian-shuai, Li / Fei, Gao / Yi-qiu, Tan	Rheological and physical properties of asphalt mixed with warm compaction modifier	309-316
Liu, Zanqun / Li, Xiangning / Deng, Dehua / De Schutter, Geert / Hou, Le	The role of Ca(OH) 2 in sulfate salt weathering of ordinary concrete	127-134
Hosseini, Sajjad / Heidarpour, Amin / Collins, Frank / Hutchinson, Christopher R.	Strain ageing effect on the temperature dependent mechanical properties of partially damaged structural mild-steel induced by high strain rate loading	454-463
Micaelo, R. / Al-Mansoori, T. / Garcia, A.	Study of the mechanical properties and self-healing ability of asphalt mixture containing calcium-alginate capsules	734-744
Wang, Wei-Chien / Wang, Her-Yung / Tsai, Hsin-Chieh	Study on engineering properties of alkali-activated ladle furnace slag geopolymer	800-805
Chi, Maochieh	Synthesis and characterization of mortars with circulating fluidized bed combustion fly ash and ground granulated blast-furnace slag	565-573
Zhang, Weiping / Min, Hongguang / Gu, Xianglin	Temperature response and moisture transport in damaged concrete under an atmospheric environment	290-299
Gökalp, İslam / Uz, Volkan Emre / Saltan, Mehmet	Testing the abrasion resistance of aggregates including by-products by using Micro Deval apparatus with different standard test methods	1-7
Kaur, Gurvinder / Dhami, Navdeep Kaur / Goyal, Shweta / Mukherjee, Abhijit / Sudhakara Reddy, M.	Utilization of carbon dioxide as an alternative to urea in biocementation	527-533
Zhang, Yi / Fei, Aiyan / Li, Dongxu	Utilization of waste glycerin, industry lignin and cane molasses as grinding aids in blended cement	785-791
Ma, Cong / Chen, Bing / Chen, Longzhu	Variables controlling strength development of self-compacting earth-based construction	336-345
Gong, Jianqing / Duan, Zurong / Sun, Kaiqiang / Xiao, Min	Waterproof properties of thermal insulation mortar containing vitrified microsphere	274-280

About this
data sheet
IssueID
22600
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - October 2016

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - October 2016

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.