Construction and Building Materials - octobre 2016

Publié:	octobre 2016

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Prem, Prabhat Ranjan / Murthy, A. Ramachandra	Acoustic emission and flexural behaviour of RC beams strengthened with UHPC overlay	481-492
Frigio, F. / Raschia, S. / Steiner, D. / Hofko, B. / Canestrari, F.	Aging effects on recycled WMA porous asphalt mixtures	712-718
Ronald, Mercado / Luis, Fuentes Pumarejo	Asphalt emulsions formulation: State-of-the-art and dependency of formulation on emulsions properties	162-173
Ceroni, Francesca / Cuzzilla, Roberto / Pecce, Marisa	Assessment of performance of steel and GFRP bars as injected anchors in masonry walls	78-98
Shukri, A. A. / Hosen, M. A. / Muhamad, R. / Jumaat, M. Z.	Behaviour of precracked RC beams strengthened using the side-NSM technique	617-626
Mertoğlu, Çelebi / Anil, Özgür / Durucan, Cengizhan	Bond slip behavior of anchored CFRP strips on concrete surfaces	553-564
Cui, P. Q. / Zhou, H. G. / Li, C. / Wu, S. P. / Xiao, Y.	Characteristics of using layered double hydroxides to reduce the VOCs from bituminous materials	69-77
Sola, Ozlem Celik / Sayin, Baris	Characterization of ground slag and borax waste and their effects on the compressive strength of briquettes	727-733
Corinaldesi, Valeria / Mazzoli, Alida / Siddique, Rafat	Characterization of lightweight mortars containing wood processing by-products waste	281-289
Sun, Yiren / Huang, Baoshan / Chen, Jingyun / Jia, Xiaoyang / Ding, Yongjie	Characterizing rheological behavior of asphalt binder over a complete range of pavement service loading frequency and temperature	661-672
Tang, Naipeng / Huang, Weidong / Xiao, Feipeng	Chemical and rheological investigation of high-cured crumb rubber-modified asphalt	847-854
Da, Bo / Yu, Hongfa / Ma, Haiyan / Tan, Yongshan / Mi, Renjie / Dou, Xuemei	Chloride diffusion study of coral concrete in a marine environment	47-58
López, Anahí / Guzmán, Gastón Alejandro / Di Sarli, Alejandro Ramón	Color stability in mortars and concretes. Part 2: Study on architectural concretes	248-253
Li, Xuelian / Zhou, Zhigang / You, Zhanping	Compaction temperatures of Sasobit produced warm mix asphalt mixtures modified with SBS	357-364
Chandrappa, Anush K. / Biligiri, Krishna Prapoorna	Comprehensive investigation of permeability characteristics of pervious concrete: A hydrodynamic approach	627-637
Rezaifar, Omid / Hasanzadeh, Mohsen / Gholhaki, Majid	Concrete made with hybrid blends of crumb rubber and metakaolin: Optimization using Response Surface Method	59-68
Li, Pengda / Wu, Yu-Fei / Gravina, Rebecca	Cyclic response of FRP-confined concrete with post-peak strain softening behavior	814-828
Jiabin, Wang / Ditao, Niu / Zhanping, Song	Damage layer thickness and formation mechanism of shotcrete with and without steel fiber under sulfate corrosion of dry–wet cycles by ultrasound plane testing method	346-356
Mostofinejad, Davood / Nikoo, Mojtaba Rostami / Hosseini, Seyed Arman	Determination of optimized mix design and curing conditions of reactive powder concrete (RPC)	754-767
Kabir, M. H. / Fawzia, S. / Chan, T. H. T.	Durability of CFRP strengthened circular hollow steel members under cold weather: Experimental and numerical investigation	372-383
Urbonas, L. / Leno, V. / Heinz, D.	Effect of carbonation in supercritical CO 2 on the properties of hardened cement paste of different alkalinity	704-711
Aliabdo, Ali A. / Abd Elmoaty, Abd Elmoaty M. / Salem, Hazem A.	Effect of cement addition, solution resting time and curing characteristics on fly ash based geopolymer concrete performance	581-593
Schneider, Nick / Stephan, Dietmar	The effect of d -gluconic acid as a retarder of ground granulated blast-furnace slag pastes	99-105
Zhang, Duo / Shao, Yixin	Effect of early carbonation curing on chloride penetration and weathering carbonation in concrete	516-526
Herrero, Tamara / Vegas, Iñigo J. / Santamaria, Amaia / San-José, José T. / Skaf, Marta	Effect of high-alumina ladle furnace slag as cement substitution in masonry mortars	404-413
Song, Chiwon / Choi, Young Cheol / Choi, Seongcheol	Effect of internal curing by superabsorbent polymers – Internal relative humidity and autogenous shrinkage of alkali-activated slag mortars	198-206
Saba, N. / Paridah, M. T. / Abdan, K. / Ibrahim, N. A.	Effect of oil palm nano filler on mechanical and morphological properties of kenaf reinforced epoxy composites	15-26
Ma, Cong / Chen, Bing / Chen, Longzhu	Effect of organic matter on strength development of self-compacting earth-based construction stabilized with cement-based composites	414-423
Chen, Ruoyu / Li, Yuanbing / Xiang, Ruofei / Li, Shujing	Effect of particle size of fly ash on the properties of lightweight insulation materials	120-126
Shanahan, Natallia / Tran, Victor / Williams, Andrew / Zayed, A.	Effect of SCM combinations on paste rheology and its relationship to particle characteristics of the mixture	745-753
Cong, Peiliang / Liu, Ning / Tian, Yu / Zhang, Yihan	Effects of long-term aging on the properties of asphalt binder containing diatoms	534-540
Karamloo, Mohammad / Mazloom, Moosa / Payganeh, Gholamhasan	Effects of maximum aggregate size on fracture behaviors of self-compacting lightweight concrete	508-515
Sacramento Aragão, Francisco Thiago / Pazos, Abraham Ricardo Guerrero / Motta, Laura Maria Goretti da / Kim, Yong-Rak / Nascimento, Luis Alberto Herrmann do	Effects of morphological characteristics of aggregate particles on the mechanical behavior of bituminous paving mixtures	444-453
Coppola, Luigi / Buoso, Alessandra / Coffetti, Denny / Kara, Patricia / Lorenzi, Sergio	Electric arc furnace granulated slag for sustainable concrete	115-119
Kim, Heeae / Koh, Taehoon / Pyo, Sukhoon	Enhancing flowability and sustainability of ultra high performance concrete incorporating high replacement levels of industrial slags	153-160
Saha, Ashish Kumer / Sarker, Prabir Kumar	Expansion due to alkali-silica reaction of ferronickel slag fine aggregate in OPC and blended cement mortars	135-142
Tran, Van-Dang / Oudjene, Marc / Méausoone, Pierre-Jean	Experimental investigation on full-scale glued oak solid timber beams for structural bearing capacity	365-371
Lu, Xuan / Chen, Bing	Experimental study of magnesium phosphate cements modified by metakaolin	719-726
Xiao, Lianzhen / Ren, Zheng / Shi, Wenchong / Wei, Xiaosheng	Experimental study on chloride permeability in concrete by non-contact electrical resistivity measurement and RCM	27-34
Sharma, Snigdha / Kothiyal, N. C.	Facile growth of carbon nanotubes coated with carbon nanoparticles: A potential low-cost hybrid nanoadditive for improved mechanical, electrical, microstructural and crystalline properties of cement mortar matrix	829-846
Konkol, Janusz / Prokopski, Grzegorz	Fracture toughness and fracture surfaces morphology of metakaolinite-modified concrete	638-648
Sá Ribeiro, Ruy A. / Sá Ribeiro, Marilene G. / Sankar, Kaushik / Kriven, Waltraud M.	Geopolymer-bamboo composite – A novel sustainable construction material	501-507
Ježová, Jana / Mertens, Laurence / Lambot, Sébastien	Ground-penetrating radar for observing tree trunks and other cylindrical objects	214-225
Niry Razafinjato, Rijaniaina / Beaucour, Anne-Lise / Hebert, Ronan L. / Ledésert, Béatrice / Bodet, Raphaël / Noumowé, Albert	High temperature behaviour of a wide petrographic range of siliceous and calcareous aggregates for concretes	261-273
Yahaghi, Javad / Muda, Zakaria Che / Beddu, Salmia Bnt	Impact resistance of oil palm shells concrete reinforced with polypropylene fibre	394-403
Asadollahi, S. / Saeedian, A. / Dehestani, M. / Zahedi, F.	Improved compressive fracture models for self-consolidating concrete (SCC)	473-480
Oruç, Şeref / Yılmaz, Bahadır	Improvement in performance properties of asphalt using a novel boron-containing additive	207-213
Assi, Lateef / Ghahari, SeyedAli / Deaver, Edward (Eddie) / Leaphart, Davis / Ziehl, Paul	Improvement of the early and final compressive strength of fly ash-based geopolymer concrete at ambient conditions	806-813
Li, Xiangyu / Habibnejad korayem, Asghar / Li, Chenyang / Liu, Yanming / He, Hongsen / Sanjayan, Jay G. / Duan, Wen Hui	Incorporation of graphene oxide and silica fume into cement paste: A study of dispersion and compressive strength	327-335
Qiang, Wang / Mengxiao, Shi / Jun, Yang	Influence of classified steel slag with particle sizes smaller than 20 μm on the properties of cement and concrete	601-610
Assaedi, H. / Shaikh, F. U. A. / Low, I. M.	Influence of mixing methods of nano silica on the microstructural and mechanical properties of flax fabric reinforced geopolymer composites	541-552
Silva, J. V. / Ismael, R. / Carmo, R. N. F. / Lourenço, C. / Soldado, E. / Costa, H. / Júlio, E.	Influence of nano-SiO 2 and nano-Al 2 O 3 additions on the shear strength and the bending moment capacity of RC beams	35-46
Zhang, Canlin / Yu, Jianying / Xu, Song / Xue, Lihui / Cao, Zhilong	Influence of UV aging on the rheological properties of bitumen modified with surface organic layered double hydroxides	574-580
Choi, Hajin / Ham, Youngjib / Popovics, John S.	Integrated visualization for reinforced concrete using ultrasonic tomography and image-based 3-D reconstruction	384-393
Said, A. M. / Quiroz, O. I. / Hatchett, D. W. / ElGawady, M.	Latex-modified concrete overlays using waste paint	191-197
Kaffetzakis, Michael / Papanicolaou, Catherine (Corina)	Lightweight Aggregate Self-Compacting Concrete (LWASCC) semi-automated mix design methodology	254-260
Roman, Claudia / Cuadri, Antonio A. / Liashenko, Ievgenii / García-Morales, Moisés / Partal, Pedro	Linear and non-linear viscoelastic behavior of SBS and LDPE modified bituminous mastics	464-472
Choi, Soo-Kyung / Kang, Yong-Hak / Yokoyama, Yutaka / Mikami, Takamasa	Load characteristics based on loading conditions of large soft body used for impact resistance testing of lightweight wall	8-14
Tadayon, Mohammad Hosein / Shekarchi, Mohammad / Tadayon, Mohsen	Long-term field study of chloride ingress in concretes containing pozzolans exposed to severe marine tidal zone	611-616
Quattrone, M. / Cazacliu, B. / Angulo, S. C. / Hamard, E. / Cothenet, A.	Measuring the water absorption of recycled aggregates, what is the best practice for concrete production?	690-703
Quadir, Upal Mohammad Towfiqul / Islam, Kamrul / Billah, A. H. M. Muntasir / Shahria Alam, M.	Mechanical and durability properties of concrete using recycled granulated steel	174-183
Lu, Chunhua / Yuan, Siqi / Cheng, Pu / Liu, Ronggui	Mechanical properties of corroded steel bars in pre-cracked concrete suffering from chloride attack	649-660
Gurumoorthy, N. / Arunachalam, K.	Micro and mechanical behaviour of Treated Used Foundry Sand concrete	184-190
Saride, Sireesh / Avirneni, Deepti / Challapalli, Subrahmanyam	Micro-mechanical interaction of activated fly ash mortar and reclaimed asphalt pavement materials	424-435
Li, Shuangxin	Microstructure and composition characterisation of three 20-year-old GGBS-OPC blended pastes	226-234
Hilloulin, Benoit / Legland, Jean-Baptiste / Lys, Elisabeth / Abraham, Odile / Loukili, Ahmed / Grondin, Frédéric / Durand, Olivier / Tournat, Vincent	Monitoring of autogenous crack healing in cementitious materials by the nonlinear modulation of ultrasonic coda waves, 3D microscopy and X-ray microtomography	143-152
Rattanadecho, Phadungsak / Makul, Natt / Pichaicherd, Aumpol / Chanamai, Porncharoen / Rungroungdouyboon, Bunyong	A novel rapid microwave-thermal process for accelerated curing of concrete: Prototype design, optimal process and experimental investigations	768-784
Yang, Wenfeng / Xue, Yongjie / Wu, Shaopeng / Xiao, Yue / Zhou, Min	Performance investigation and environmental application of basic oxygen furnace slag – Rice husk ash based composite cementitious materials	493-500
Cho, Bongsuk / Choi, Hyeonggil	Physical and chemical properties of concrete using GGBFS-KR slag-gypsum binder	436-443
Sadrossadat, Ehsan / Heidaripanah, Ali / Osouli, Saeedeh	Prediction of the resilient modulus of flexible pavement subgrade soils using adaptive neuro-fuzzy inference systems	235-247
Ma, Cong / Chen, Bing	Properties of foamed concrete containing water repellents	106-114
Wang, Yu / Shao, Yixin / Matovic, Miodrag Darko / Whalen, Joann K.	Recycling combustion ash for sustainable cement production: A critical review with data-mining and time-series predictive models	673-689
Contreras, M. / Teixeira, S. R. / Lucas, M. C. / Lima, L. C. N. / Cardoso, D. S. L. / da Silva, G. A. C. / Gregório, G. C. / de Souza, A. E. / dos Santos, A.	Recycling of construction and demolition waste for producing new construction material (Brazil case-study)	594-600
Shen, Dejian / Shi, Xiang / Zhu, Shuaishuai / Duan, Xiaofang / Zhang, Jinyang	Relationship between tensile Young's modulus and strength of fly ash high strength concrete at early age	317-326
Dong, Wei / Shen, Xiang-dong / Xue, Hui-jun / He, Jing / Liu, Yu	Research on the freeze-thaw cyclic test and damage model of Aeolian sand lightweight aggregate concrete	792-799
Ait Mohamed Amer, Adem / Ezziane, Karim / Bougara, Abdelkader / Adjoudj, M'hamed	Rheological and mechanical behavior of concrete made with pre-saturated and dried recycled concrete aggregates	300-308
Lei, Zhang / Tian-shuai, Li / Fei, Gao / Yi-qiu, Tan	Rheological and physical properties of asphalt mixed with warm compaction modifier	309-316
Liu, Zanqun / Li, Xiangning / Deng, Dehua / De Schutter, Geert / Hou, Le	The role of Ca(OH) 2 in sulfate salt weathering of ordinary concrete	127-134
Hosseini, Sajjad / Heidarpour, Amin / Collins, Frank / Hutchinson, Christopher R.	Strain ageing effect on the temperature dependent mechanical properties of partially damaged structural mild-steel induced by high strain rate loading	454-463
Micaelo, R. / Al-Mansoori, T. / Garcia, A.	Study of the mechanical properties and self-healing ability of asphalt mixture containing calcium-alginate capsules	734-744
Wang, Wei-Chien / Wang, Her-Yung / Tsai, Hsin-Chieh	Study on engineering properties of alkali-activated ladle furnace slag geopolymer	800-805
Chi, Maochieh	Synthesis and characterization of mortars with circulating fluidized bed combustion fly ash and ground granulated blast-furnace slag	565-573
Zhang, Weiping / Min, Hongguang / Gu, Xianglin	Temperature response and moisture transport in damaged concrete under an atmospheric environment	290-299
Gökalp, İslam / Uz, Volkan Emre / Saltan, Mehmet	Testing the abrasion resistance of aggregates including by-products by using Micro Deval apparatus with different standard test methods	1-7
Kaur, Gurvinder / Dhami, Navdeep Kaur / Goyal, Shweta / Mukherjee, Abhijit / Sudhakara Reddy, M.	Utilization of carbon dioxide as an alternative to urea in biocementation	527-533
Zhang, Yi / Fei, Aiyan / Li, Dongxu	Utilization of waste glycerin, industry lignin and cane molasses as grinding aids in blended cement	785-791
Ma, Cong / Chen, Bing / Chen, Longzhu	Variables controlling strength development of self-compacting earth-based construction	336-345
Gong, Jianqing / Duan, Zurong / Sun, Kaiqiang / Xiao, Min	Waterproof properties of thermal insulation mortar containing vitrified microsphere	274-280

Informations
sur cette fiche
IssueID
22600
Publié(e) le:
15.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - octobre 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - octobre 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.