Construction and Building Materials - October 2016

Published:	October 2016

Articles in this Issue

Author(s)	Title	Page(s)
Nam, Boo Hyun / An, Jinwoo / Youn, Heejung	Accelerated calcite precipitation (ACP) method for recycled concrete aggregate (RCA)	749-756
Jones, Kell / Stegemann, Julia / Sykes, Judith / Winslow, Peter	Adoption of unconventional approaches in construction: The case of cross-laminated timber	690-702
Foroutan Mirhosseini, S. A. / Khabiri, M. M. / Kavussi, A. / Jalal Kamali, M. H.	Applying surface free energy method for evaluation of moisture damage in asphalt mixtures containing date seed ash	408-416
Youssf, Osama / Mills, Julie E. / Hassanli, Reza	Assessment of the mechanical performance of crumb rubber concrete	175-183
Won, Joon-Yuen / Lee, Sang-Hyun / Park, Tae-Won / Nam, Kyung-Yong	Basic applicability of an insulated gang form for concrete building construction in cold weather	458-464
Pasupathy, Kirubajiny / Berndt, Marita / Castel, Arnaud / Sanjayan, Jay / Pathmanathan, Rajeev	Carbonation of a blended slag-fly ash geopolymer concrete in field conditions after 8years	661-669
Abadou, Yacine / Mitiche-Kettab, Ratiba / Ghrieb, Abderrahmane	Ceramic waste influence on dune sand mortar performance	703-713
Luo, Rong / Liu, Hanqi / Zhang, Yuqing	Characterization of linear viscoelastic, nonlinear viscoelastic and damage stages of asphalt mixtures	72-80
Yi, Junyan / Cao, Yixiang / Feng, Decheng / Huang, Yudong	Characterization of zirconium tungstate filler and performance investigation on asphalt mastic made with zirconium tungstate filler	387-397
Fu, Chuanqing / Ye, Hailong / Jin, Xianyu / Yan, Dongming / Jin, Nanguo / Peng, Zhaoxiong	Chloride penetration into concrete damaged by uniaxial tensile fatigue loading	714-723
Molnár, Miklós / Larsson Ivanov, Oskar	Clay brick masonry facades with cracks caused by corroding bed joint reinforcement – Findings from field survey and laboratory study	775-783
Martin, William D. / Putman, Bradley J.	Comparison of methods for measuring porosity of porous paving mixtures	299-305
Betti, Michele / Brunetti, Michele / Lauriola, Marco Pio / Nocetti, Michela / Ravalli, Francesco / Pizzo, Benedetto	Comparison of newly proposed test methods to evaluate the bonding quality of Cross-Laminated Timber (CLT) panels by means of experimental data and finite element (FE) analysis	952-963
Choo, H. / Lim, S. / Lee, W. / Lee, C.	Compressive strength of one-part alkali activated fly ash using red mud as alkali supplier	21-28
Saint-Pierre, François / Philibert, Alain / Giroux, Bernard / Rivard, Patrice	Concrete Quality Designation based on Ultrasonic Pulse Velocity	1022-1027
Banyhussan, Qais Sahib / Yıldırım, Gürkan / Bayraktar, Ender / Demirhan, Serhat / Şahmaran, Mustafa	Deflection-hardening hybrid fiber reinforced concrete: The effect of aggregate content	41-52
Aalil, Issam / Beck, Kévin / Brunetaud, Xavier / Cherkaoui, Khalid / Chaaba, Ali / Al-Mukhtar, Muzahim	Deterioration analysis of building calcarenite stone in the House of Venus in the archaeological site of Volubilis (Morocco)	1127-1141
Çullu, Mustafa / Ertaş, Haydar	Determination of the effect of lead mine waste aggregate on some concrete properties and radiation shielding	625-631
Bories, Cecile / Vedrenne, Emeline / Paulhe-Massol, Anne / Vilarem, Gerard / Sablayrolles, Caroline	Development of porous fired clay bricks with bio-based additives: Study of the environmental impacts by Life Cycle Assessment (LCA)	1142-1151
Soliman, N. A. / Tagnit-Hamou, A.	Development of ultra-high-performance concrete using glass powder – Towards ecofriendly concrete	600-612
Zhang, Zhihua / Zhang, Xiedong / Qiu, Hongsheng / Daddow, Mohammad	Dynamic characteristics of track-ballast-silty clay with irregular vibration levels generated by high-speed train based on DEM	564-573
Garilli, Erika / Autelitano, Federico / Godenzoni, Carlotta / Graziani, Andrea / Giuliani, Felice	Early age evolution of rheological properties of over-stabilized bitumen emulsion-cement pastes	352-360
Cantù, Michela / Giacometti, Fabio / Landi, Angelo Giuseppe / Riccardi, Maria Pia / Tarantino, Serena Chiara / Grimoldi, Alberto	Earthen mortars from Cremona (Northern Italy): The evolution throughout centuries of a manufacturing tradition	520-532
Kuzielová, Eva / Pach, Ladislav / Palou, Martin	Effect of activated foaming agent on the foam concrete properties	998-1004
Kim, Hyeong-Ki / Jang, Jeong Gook / Lim, Min-Ju / Cho, Chang-Geun	Effect of fiber addition on fresh and hardened properties of spun cast concrete	306-315
Georgiou, Antroula V. / Pantazopoulou, Stavroula J.	Effect of fiber length and surface characteristics on the mechanical properties of cementitious composites	1216-1228
Chen, Yuxuan / Shui, Zhonghe / Chen, Wei / Li, Qiu / Chen, Guowei	Effect of MgO content of synthetic slag on the formation of Mg-Al LDHs and sulfate resistance of slag-fly ash-clinker binder	766-774
Homan, Lydia / Ababneh, Ayman Nureddin / Xi, Yunping	The effect of moisture transport on chloride penetration in concrete	1189-1195
Varhen, Christian / Dilonardo, Isabela / Romano, Roberto Cesar de Oliveira / Pileggi, Rafael Giuliano / de Figueiredo, Antonio Domingues	Effect of the substitution of cement by limestone filler on the rheological behaviour and shrinkage of microconcretes	375-386
Mohammed, Tarek Uddin / Rahman, Md Nafiur	Effect of types of aggregate and sand-to-aggregate volume ratio on UPV in concrete	832-841
Wang, Qianfeng / Liu, YunHe / Peng, Gang	Effect of water pressure on mechanical behavior of concrete under dynamic compression state	501-509
Xu, Zhenhai / Zhou, Zonghui / Du, Peng / Cheng, Xin	Effects of nano-silica on hydration properties of tricalcium silicate	1169-1177
Farias, Luísa Gardênia A. T. / Leitinho, Janaina L. / Amoni, Bruno de C. / Bastos, Juceline B. S. / Soares, Jorge B. / Soares, Sandra de A. / de Sant'Ana, Hosiberto B.	Effects of nanoclay and nanocomposites on bitumen rheological properties	873-883
Gong, Jian / Cao, Jian / Wang, Yuan-Feng	Effects of sulfate attack and dry-wet circulation on creep of fly-ash slag concrete	12-20
Shi, Zhenguo / Shi, Caijun / Liu, Hui / Li, Pingliang	Effects of triisopropanol amine, sodium chloride and limestone on the compressive strength and hydration of Portland cement	210-218
Islam, Md. Jahidul / Meherier, Md. Salamah / Islam, A. K. M. Rakinul	Effects of waste PET as coarse aggregate on the fresh and harden properties of concrete	946-951
Zeyad, A. M. / Johari, M. A. Megat / Tayeh, B. A. / Yusuf, Moruf Olalekan	Efficiency of treated and untreated palm oil fuel ash as a supplementary binder on engineering and fluid transport properties of high-strength concrete	1066-1079
Rhee, Inkyu / Lee, Jun Seok / Kim, Yoong Ahm / Kim, Jin Hee / Kim, Ji Hoon	Electrically conductive cement mortar: Incorporating rice husk-derived high-surface-area graphene	632-642
Zhou, Qiang / Wang, Fenglai / Zhu, Fei	Estimation of compressive strength of hollow concrete masonry prisms using artificial neural networks and adaptive neuro-fuzzy inference systems	417-426
Khan, Abdullah / Redelius, Per / Kringos, Nicole	Evaluation of adhesive properties of mineral-bitumen interfaces in cold asphalt mixtures	1005-1021
Qin, Xiao-Chuan / Meng, Shao-Ping / Cao, Da-fu / Tu, Yong-Ming / Sabourova, Natalia / Grip, Niklas / Ohlsson, Ulf / Blanksvärd, Thomas / Sas, Gabriel / Elfgren, Lennart	Evaluation of freeze-thaw damage on concrete material and prestressed concrete specimens	892-904
Nath, S. K. / Kumar, Sanjay	Evaluation of the suitability of ground granulated silico-manganese slag in Portland slag cement	127-134
Anil, Özgür / Durucan, Cengizhan / Erdem, R. Tuğrul / Yorgancilar, M. Arif	Experimental and numerical investigation of reinforced concrete beams with variable material properties under impact loading	94-104
Bagher Shemirani, Alireza / Naghdabadi, R. / Ashrafi, M. J.	Experimental and numerical study on choosing proper pulse shapers for testing concrete specimens by split Hopkinson pressure bar apparatus	326-336
Du, Yansheng / Chen, Zhihua / Xiong, Ming-Xiang	Experimental behavior and design method of rectangular concrete-filled tubular columns using Q460 high-strength steel	856-872
Caggiano, Antonio / Gambarelli, Serena / Martinelli, Enzo / Nisticó, Nicola / Pepe, Marco	Experimental characterization of the post-cracking response in Hybrid Steel/Polypropylene Fiber-Reinforced Concrete	1035-1043
Shatarat, Nasim / Katkhuda, Hasan / Abdel-Jaber, Mu'tasim / Alqam, Maha	Experimental investigation of reinforced concrete beams with spiral reinforcement in shear	585-594
Nguyen, Thanh Hai / Vu, Xuan Hong / Si Larbi, Amir / Ferrier, Emmanuel	Experimental study of the effect of simultaneous mechanical and high-temperature loadings on the behaviour of textile-reinforced concrete (TRC)	253-270
Zhang, Jiancheng / Jia, Jinqing	Experimental study on seismic behavior of composite frame consisting of SRC beams and SRUHSC columns subjected to cyclic loading	1055-1065
Peñaloza, Diego / Erlandsson, Martin / Falk, Andreas	Exploring the climate impact effects of increased use of bio-based materials in buildings	219-226
Liu, Xiaoyu / Yang, Zheng	Failure mechanism criterion for multiaxial strength of concrete after exposure to normal and high temperatures	105-118
Wang, Yanshuai / Ding, Weijian / Fang, Guohao / Liu, Yuqing / Xing, Feng / Dong, Biqin	Feasibility study on corrosion protection of steel bar in a self-immunity system based on increasing OH− content	742-748
Muñoz V., P. / Morales O., M. P. / Letelier G., V. / Mendívil G., M. A.	Fired clay bricks made by adding wastes: Assessment of the impact on physical, mechanical and thermal properties	241-252
Khan, M. Iqbal / Abbass, Wasim	Flexural behavior of high-strength concrete beams reinforced with a strain hardening cement-based composite layer	927-935
Anagnostopoulos, Costas A. / Sapidis, Giorgos / Papastergiadis, Efthimios	Fundamental properties of epoxy resin-modified cement grouts	184-195
Hossain, K. M. A. / Alam, S. / Anwar, M. S. / Julkarnine, K. M. Y.	High performance composite slabs with profiled steel deck and Engineered Cementitious Composite – Strength and shear bond characteristics	227-240
Zhu, Hongping / Zhang, Zixiang / Zhou, Fangyuan / Luo, Hui / Deng, Xuan	Horizontal mechanical behavior of elastomeric bearings under eccentric vertical loading: Full-scale tests and analytical modeling	574-584
Amoussou, Rétyce I. H. D. T. / Tanoue, Hiroshi / Sasaki, Mitsuru / Shigeishi, Mitsuhiro	Hydrothermal recovery of asphalt from asphalt concrete	1196-1204
Bourdot, Alexandra / Promis, Geoffrey / Tran Le, Anh Dung / Douzane, Omar / Benazzouk, Amar / Rosquoet, Frédéric / Langlet, Thierry	Hygrothermal properties of blocks based on eco-aggregates: Experimental and numerical study	279-289
Noufal E., Rahmathulla / Manju, Unnikrishnan	I-sand: An environment friendly alternative to river sand in Reinforced Cement Concrete constructions	1152-1157
Belayachi, Naima / Hoxha, Dashnor / Slaimia, Marouen	Impact of accelerated climatic aging on the behavior of gypsum plaster-straw material for building thermal insulation	912-918
Korah, L. V. / Nigay, P. M. / Cutard, T. / Nzihou, A. / Thomaß, S.	The impact of the particle shape of organic additives on the anisotropy of a clay ceramic and its thermal and mechanical properties	654-660
Wang, Yue / An, Mingzhe / Yu, Ziruo / Han, Song	Impacts of various factors on the rehydration of cement-based materials with a low water–binder ratio using mathematical models	160-167
Wang, Ru / Wang, Gaoyong	Influence and mechanism of zeolite on the setting and hardening process of styrene-acrylic ester/cement composite cementitious materials	757-765
Huseien, Ghasan Fahim / Mirza, Jahangir / Ismail, Mohmmed / Hussin, Mohd Warid	Influence of different curing temperatures and alkali activators on properties of GBFS geopolymer mortars containing fly ash and palm-oil fuel ash	1229-1240
Qu, H. P. / Chen, H. T. / Lang, Y. P.	Influence of Mn-Ni alloying elements on surface film and pitting resistance of Cr-Mn austenitic stainless steels	427-437
Ismael, R. / Silva, J. V. / Carmo, R. N. F. / Soldado, E. / Lourenço, C. / Costa, H. / Júlio, E.	Influence of nano-SiO2 and nano-Al2O3 additions on steel-to-concrete bonding	1080-1092
Zhong, Rui / Xu, Man / Vieira Netto, Roberto / Wille, Kay	Influence of pore tortuosity on hydraulic conductivity of pervious concrete: Characterization and modeling	1158-1168
Li, Qinghua / Zhao, Xin / Xu, Shilang / Gao, Xiang	Influence of steel fiber on dynamic compressive behavior of hybrid fiber ultra high toughness cementitious composites at different strain rates	490-500
Xu, Jinxia / Feng, Wei / Jiang, Linhua / Xu, Yi / Song, Yingbin / Cao, Yalong / Tan, Qiping	Influence of surfactants on chloride binding in cement paste	369-374
Volland, Svetlana	Influence of the mechanical activation of raw mixes on the properties of foam glass from sand sludge	119-126
Silva, Catarina / Branco, Jorge M. / Ringhofer, Andreas / Lourenço, Paulo B. / Schickhofer, Gerhard	The influences of moisture content variation, number and width of gaps on the withdrawal resistance of self tapping screws inserted in cross laminated timber	1205-1215
Park, Seung Hun / Kim, Dong joo / Kim, Sung Wook	Investigating the impact resistance of ultra-high-performance fiber-reinforced concrete using an improved strain energy impact test machine	145-159
Rashid, Khuram / Zhang, Dawei / Ueda, Tamon / Jin, Weiliang	Investigation on concrete-PCM interface under elevated temperature: At material level and member level	465-478
Hu, Jing / Liu, Pengfei / Wang, Dawei / Oeser, Markus / Tan, Yiqiu	Investigation on fatigue damage of asphalt mixture with different air-voids using microstructural analysis	936-945
Sala, Elisa / Zanotti, Cristina / Passoni, Chiara / Marini, Alessandra	Lightweight natural lime composites for rehabilitation of Historical Heritage	81-93
Cui, Liang / Fall, Mamadou	Mechanical and thermal properties of cemented tailings materials at early ages: Influence of initial temperature, curing stress and drainage conditions	553-563
Thomas, Job / Harilal, B.	Mechanical properties of cold bonded quarry dust aggregate concrete subjected to elevated temperature	724-730
Li, Ben / Mao, Jize / Nawa, Toyoharu / Liu, Zongmin	Mesoscopic chloride ion diffusion model of marine concrete subjected to freeze-thaw cycles	337-351
Gaedicke, Cristián / Torres, Anthony / Huynh, Khanh C. T. / Marines, Armando	A method to correlate splitting tensile strength and compressive strength of pervious concrete cylinders and cores	271-278
Akacem, Mustapha / Bouteldja, Mohamed / Cerezo, Veronique / Hachichi, Abdelkader	A method to use local low performances aggregates in asphalt pavements – An Algerian case study	290-298
Yang, Rongwei / Zhang, Zhiling / Xie, Meijie / Li, Kefei	Microstructural insights into the lime mortars mixed with sticky rice sol–gel or water: A comparative study	974-980
Smyl, Danny / Ghasemzadeh, Farnam / Pour-Ghaz, Mohammad	Modeling water absorption in concrete and mortar with distributed damage	438-449
Rahal, S. / Sellier, A. / Verdier, J.	Modelling of change in permeability induced by dilatancy for brittle geomaterials	613-624
Alogla, Kamal / Weekes, Laurence / Augusthus-Nelson, Levingshan	A new mitigation scheme to resist progressive collapse of RC structures	533-545
Merryfield, Gregory / El-Ragaby, Amr / Ghrib, Faouzi	New shear connector for Open Web Steel Joist with metal deck and concrete slab floor system	1-11
Guo, Yuxi / Zhang, Yihe / Huang, Hongwei / Meng, Xianghai / Liu, Yangyang / Tu, Shuchen / Li, Baoying	Novel glass ceramic foams materials based on polishing porcelain waste using the carbon ash waste as foaming agent	1093-1100
Sua-iam, Gritsada / Sokrai, Prakasit / Makul, Natt	Novel ternary blends of Type 1 Portland cement, residual rice husk ash, and limestone powder to improve the properties of self-compacting concrete	1028-1034
Sakai, Yuya / Kishi, Toshiharu	Numerical simulation of air permeability in covercrete assuming molecular flow in circular tubes	784-789
Barkoula, N.-M. / Ioannou, C. / Aggelis, D. G. / Matikas, T. E.	Optimization of nano-silica's addition in cement mortars and assessment of the failure process using acoustic emission monitoring	546-552
Iwański, Marek / Buczyński, Przemysław / Mazurek, Grzegorz	Optimization of the road binder used in the base layer in the road construction	1044-1054
Baite, Edem / Messan, Adamah / Hannawi, Kinda / Tsobnang, François / Prince, William	Physical and transfer properties of mortar containing coal bottom ash aggregates from Tefereyre (Niger)	919-926
Abhilash, H. N. / McGregor, F. / Millogo, Y. / Fabbri, A. / Séré, A. D. / Aubert, J. E. / Morel, J. C.	Physical, mechanical and hygrothermal properties of lateritic building stones (LBS) from Burkina Faso	731-741
Sanchez, L. F. M. / Fournier, B. / Jolin, M. / Bastien, J. / Mitchell, D.	Practical use of the Stiffness Damage Test (SDT) for assessing damage in concrete infrastructure affected by alkali-silica reaction	1178-1188
Lim, Chang-keun / Kim, Jin-Keun / Seo, Tae-Seok	Prediction of concrete adiabatic temperature rise characteristic by semi-adiabatic temperature rise test and FEM analysis	679-689
Li, Zhuguo / Cao, Guodong / Tan, Yuanqiang	Prediction of time-dependent flow behaviors of fresh concrete	510-519
Cao, Peng / Jin, Feng / Feng, Decheng / Zhou, Changjun / Hu, Weichao	Prediction on dynamic modulus of asphalt concrete with random aggregate modeling methods and virtual physics engine	987-997
Andal, Jonathan / Shehata, Medhat / Zacarias, Philip	Properties of concrete containing recycled concrete aggregate of preserved quality	842-855
Han, Baoguo / Zhang, Liqing / Zhang, Chenyu / Wang, Yunyang / Yu, Xun / Ou, Jinping	Reinforcement effect and mechanism of carbon fibers to mechanical and electrically conductive properties of cement-based materials	479-489
Wang, Tao / Jia, Hengqiong / Li, Honggang / Li, Haiyan / Shao, Piyan	Research on water seepage of cement asphalt emulsified (CA) mortar	595-599
Ouyang, Jian / Han, Baoguo / Cao, Yu / Zhou, Wenjie / Li, Wengui / Shah, Surendra P.	The role and interaction of superplasticizer and emulsifier in fresh cement asphalt emulsion paste through rheology study	643-653
Katkhuda, Hasan / Shatarat, Nasim	Shear behavior of reinforced concrete beams using treated recycled concrete aggregate	63-71
Waseem, Shakeel Ahmad / Singh, Bhupinder	Shear transfer strength of normal and high-strength recycled aggregate concrete – An experimental investigation	29-40
Huang, Puxi / Zeidler, Anita / Chang, Wen-Shao / Ansell, Martin P. / Chew, Y. M. J. / Shea, Andy	Specific heat capacity measurement of Phyllostachys edulis (Moso bamboo) by differential scanning calorimetry	821-831
Qin, Xi / Xu, Qianjun	Statistical analysis of initial defects between concrete layers of dam using X-ray computed tomography	1101-1113
Mohamad Nidzam, Rahmat / Norsalisma, Ismail / Kinuthia, John Mungai	Strength and environmental evaluation of stabilised Clay-PFA eco-friendly bricks	964-973
Nie, Qingke / Hu, Wei / Ai, Tao / Huang, Baoshan / Shu, Xiang / He, Qiang	Strength properties of geopolymers derived from original and desulfurized red mud cured at ambient temperature	905-911
Kumar, Sanjeev / Gupta, Ramesh Chandra / Shrivastava, Sandeep	Strength, abrasion and permeability studies on cement concrete containing quartz sandstone coarse aggregates	884-891
De Sutter, S. / Verbruggen, S. / Tysmans, T.	Structural behaviour of hybrid composite-concrete floors: Experimental validation and analytical simulation	790-799
Žvironaitė, Jadvyga / Grinys, Audrius / Ivanauskas, Ernestas / Kligys, Modestas	The sulfate resistance of various cementitious binders according to different performance indicators at Nordic countries conditions	361-368
Ogundiran, Mary B. / Kumar, Sanjay	Synthesis of fly ash-calcined clay geopolymers: Reactivity, mechanical strength, structural and microstructural characteristics	450-457
Khan, Musaad Zaheer Nazir / Shaikh, Faiz Uddin Ahmed / Hao, Yifei / Hao, Hong	Synthesis of high strength ambient cured geopolymer composite by using low calcium fly ash	809-820
Barra, Breno / Momm, Leto / Guerrero, Yader / Al-Qureshi, Hazim Ali / Mikowski, Alexandre / Michels, Rodrigo	Temperature implications on rheological-mechanical behavior and design of high modulus dense asphalt mix	135-144
Karim, Mohammad Razaul / Hashim, Huzaifa / Razak, Hashim Abdul	Thermal activation effect on palm oil clinker properties and their influence on strength development in cement mortar	670-678
Yu, Huayang / Leng, Zhen / Gao, Zheming	Thermal analysis on the component interaction of asphalt binders modified with crumb rubber and warm mix additives	168-174
Zheng, Keren / Chen, Lou / Gbozee, Mulbah	Thermal stability of geopolymers used as supporting materials for TiO2 film coating through sol-gel process: Feasibility and improvement	1114-1126
Ramirez Cardona, Diego / Di Benedetto, Hervé / Sauzéat, Cédric / Calon, Nicolas / Saussine, Gilles	Use of a bituminous mixture layer in high-speed line trackbeds	398-407
Khan, Mehran / Ali, Majid	Use of glass and nylon fibers in concrete for controlling early age micro cracking in bridge decks	800-808
Mastali, M. / Dalvand, A.	Use of silica fume and recycled steel fibers in self-compacting concrete (SCC)	196-209
Karahancer, Sebnem Sargin / Eriskin, Ekinhan / Sarioglu, Onur / Capali, Buket / Saltan, Mehmet / Terzi, Serdal	Utilization of Arundo donax in Hot Mix Asphalt as a fiber	981-986
Wang, Lei / Chen, Season S. / Tsang, Daniel C. W. / Poon, Chi Sun / Shih, Kaimin	Value-added recycling of construction waste wood into noise and thermal insulating cement-bonded particleboards	316-325
Rashad, Alaa M.	Vermiculite as a construction material – A short guide for Civil Engineer	53-62

About this
data sheet
IssueID
22599
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - October 2016

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - October 2016

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.