Construction and Building Materials - Oktober 2016

Erschienen:	Oktober 2016

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Nam, Boo Hyun / An, Jinwoo / Youn, Heejung	Accelerated calcite precipitation (ACP) method for recycled concrete aggregate (RCA)	749-756
Jones, Kell / Stegemann, Julia / Sykes, Judith / Winslow, Peter	Adoption of unconventional approaches in construction: The case of cross-laminated timber	690-702
Foroutan Mirhosseini, S. A. / Khabiri, M. M. / Kavussi, A. / Jalal Kamali, M. H.	Applying surface free energy method for evaluation of moisture damage in asphalt mixtures containing date seed ash	408-416
Youssf, Osama / Mills, Julie E. / Hassanli, Reza	Assessment of the mechanical performance of crumb rubber concrete	175-183
Won, Joon-Yuen / Lee, Sang-Hyun / Park, Tae-Won / Nam, Kyung-Yong	Basic applicability of an insulated gang form for concrete building construction in cold weather	458-464
Pasupathy, Kirubajiny / Berndt, Marita / Castel, Arnaud / Sanjayan, Jay / Pathmanathan, Rajeev	Carbonation of a blended slag-fly ash geopolymer concrete in field conditions after 8years	661-669
Abadou, Yacine / Mitiche-Kettab, Ratiba / Ghrieb, Abderrahmane	Ceramic waste influence on dune sand mortar performance	703-713
Luo, Rong / Liu, Hanqi / Zhang, Yuqing	Characterization of linear viscoelastic, nonlinear viscoelastic and damage stages of asphalt mixtures	72-80
Yi, Junyan / Cao, Yixiang / Feng, Decheng / Huang, Yudong	Characterization of zirconium tungstate filler and performance investigation on asphalt mastic made with zirconium tungstate filler	387-397
Fu, Chuanqing / Ye, Hailong / Jin, Xianyu / Yan, Dongming / Jin, Nanguo / Peng, Zhaoxiong	Chloride penetration into concrete damaged by uniaxial tensile fatigue loading	714-723
Molnár, Miklós / Larsson Ivanov, Oskar	Clay brick masonry facades with cracks caused by corroding bed joint reinforcement – Findings from field survey and laboratory study	775-783
Martin, William D. / Putman, Bradley J.	Comparison of methods for measuring porosity of porous paving mixtures	299-305
Betti, Michele / Brunetti, Michele / Lauriola, Marco Pio / Nocetti, Michela / Ravalli, Francesco / Pizzo, Benedetto	Comparison of newly proposed test methods to evaluate the bonding quality of Cross-Laminated Timber (CLT) panels by means of experimental data and finite element (FE) analysis	952-963
Choo, H. / Lim, S. / Lee, W. / Lee, C.	Compressive strength of one-part alkali activated fly ash using red mud as alkali supplier	21-28
Saint-Pierre, François / Philibert, Alain / Giroux, Bernard / Rivard, Patrice	Concrete Quality Designation based on Ultrasonic Pulse Velocity	1022-1027
Banyhussan, Qais Sahib / Yıldırım, Gürkan / Bayraktar, Ender / Demirhan, Serhat / Şahmaran, Mustafa	Deflection-hardening hybrid fiber reinforced concrete: The effect of aggregate content	41-52
Aalil, Issam / Beck, Kévin / Brunetaud, Xavier / Cherkaoui, Khalid / Chaaba, Ali / Al-Mukhtar, Muzahim	Deterioration analysis of building calcarenite stone in the House of Venus in the archaeological site of Volubilis (Morocco)	1127-1141
Çullu, Mustafa / Ertaş, Haydar	Determination of the effect of lead mine waste aggregate on some concrete properties and radiation shielding	625-631
Bories, Cecile / Vedrenne, Emeline / Paulhe-Massol, Anne / Vilarem, Gerard / Sablayrolles, Caroline	Development of porous fired clay bricks with bio-based additives: Study of the environmental impacts by Life Cycle Assessment (LCA)	1142-1151
Soliman, N. A. / Tagnit-Hamou, A.	Development of ultra-high-performance concrete using glass powder – Towards ecofriendly concrete	600-612
Zhang, Zhihua / Zhang, Xiedong / Qiu, Hongsheng / Daddow, Mohammad	Dynamic characteristics of track-ballast-silty clay with irregular vibration levels generated by high-speed train based on DEM	564-573
Garilli, Erika / Autelitano, Federico / Godenzoni, Carlotta / Graziani, Andrea / Giuliani, Felice	Early age evolution of rheological properties of over-stabilized bitumen emulsion-cement pastes	352-360
Cantù, Michela / Giacometti, Fabio / Landi, Angelo Giuseppe / Riccardi, Maria Pia / Tarantino, Serena Chiara / Grimoldi, Alberto	Earthen mortars from Cremona (Northern Italy): The evolution throughout centuries of a manufacturing tradition	520-532
Kuzielová, Eva / Pach, Ladislav / Palou, Martin	Effect of activated foaming agent on the foam concrete properties	998-1004
Kim, Hyeong-Ki / Jang, Jeong Gook / Lim, Min-Ju / Cho, Chang-Geun	Effect of fiber addition on fresh and hardened properties of spun cast concrete	306-315
Georgiou, Antroula V. / Pantazopoulou, Stavroula J.	Effect of fiber length and surface characteristics on the mechanical properties of cementitious composites	1216-1228
Chen, Yuxuan / Shui, Zhonghe / Chen, Wei / Li, Qiu / Chen, Guowei	Effect of MgO content of synthetic slag on the formation of Mg-Al LDHs and sulfate resistance of slag-fly ash-clinker binder	766-774
Homan, Lydia / Ababneh, Ayman Nureddin / Xi, Yunping	The effect of moisture transport on chloride penetration in concrete	1189-1195
Varhen, Christian / Dilonardo, Isabela / Romano, Roberto Cesar de Oliveira / Pileggi, Rafael Giuliano / de Figueiredo, Antonio Domingues	Effect of the substitution of cement by limestone filler on the rheological behaviour and shrinkage of microconcretes	375-386
Mohammed, Tarek Uddin / Rahman, Md Nafiur	Effect of types of aggregate and sand-to-aggregate volume ratio on UPV in concrete	832-841
Wang, Qianfeng / Liu, YunHe / Peng, Gang	Effect of water pressure on mechanical behavior of concrete under dynamic compression state	501-509
Xu, Zhenhai / Zhou, Zonghui / Du, Peng / Cheng, Xin	Effects of nano-silica on hydration properties of tricalcium silicate	1169-1177
Farias, Luísa Gardênia A. T. / Leitinho, Janaina L. / Amoni, Bruno de C. / Bastos, Juceline B. S. / Soares, Jorge B. / Soares, Sandra de A. / de Sant'Ana, Hosiberto B.	Effects of nanoclay and nanocomposites on bitumen rheological properties	873-883
Gong, Jian / Cao, Jian / Wang, Yuan-Feng	Effects of sulfate attack and dry-wet circulation on creep of fly-ash slag concrete	12-20
Shi, Zhenguo / Shi, Caijun / Liu, Hui / Li, Pingliang	Effects of triisopropanol amine, sodium chloride and limestone on the compressive strength and hydration of Portland cement	210-218
Islam, Md. Jahidul / Meherier, Md. Salamah / Islam, A. K. M. Rakinul	Effects of waste PET as coarse aggregate on the fresh and harden properties of concrete	946-951
Zeyad, A. M. / Johari, M. A. Megat / Tayeh, B. A. / Yusuf, Moruf Olalekan	Efficiency of treated and untreated palm oil fuel ash as a supplementary binder on engineering and fluid transport properties of high-strength concrete	1066-1079
Rhee, Inkyu / Lee, Jun Seok / Kim, Yoong Ahm / Kim, Jin Hee / Kim, Ji Hoon	Electrically conductive cement mortar: Incorporating rice husk-derived high-surface-area graphene	632-642
Zhou, Qiang / Wang, Fenglai / Zhu, Fei	Estimation of compressive strength of hollow concrete masonry prisms using artificial neural networks and adaptive neuro-fuzzy inference systems	417-426
Khan, Abdullah / Redelius, Per / Kringos, Nicole	Evaluation of adhesive properties of mineral-bitumen interfaces in cold asphalt mixtures	1005-1021
Qin, Xiao-Chuan / Meng, Shao-Ping / Cao, Da-fu / Tu, Yong-Ming / Sabourova, Natalia / Grip, Niklas / Ohlsson, Ulf / Blanksvärd, Thomas / Sas, Gabriel / Elfgren, Lennart	Evaluation of freeze-thaw damage on concrete material and prestressed concrete specimens	892-904
Nath, S. K. / Kumar, Sanjay	Evaluation of the suitability of ground granulated silico-manganese slag in Portland slag cement	127-134
Anil, Özgür / Durucan, Cengizhan / Erdem, R. Tuğrul / Yorgancilar, M. Arif	Experimental and numerical investigation of reinforced concrete beams with variable material properties under impact loading	94-104
Bagher Shemirani, Alireza / Naghdabadi, R. / Ashrafi, M. J.	Experimental and numerical study on choosing proper pulse shapers for testing concrete specimens by split Hopkinson pressure bar apparatus	326-336
Du, Yansheng / Chen, Zhihua / Xiong, Ming-Xiang	Experimental behavior and design method of rectangular concrete-filled tubular columns using Q460 high-strength steel	856-872
Caggiano, Antonio / Gambarelli, Serena / Martinelli, Enzo / Nisticó, Nicola / Pepe, Marco	Experimental characterization of the post-cracking response in Hybrid Steel/Polypropylene Fiber-Reinforced Concrete	1035-1043
Shatarat, Nasim / Katkhuda, Hasan / Abdel-Jaber, Mu'tasim / Alqam, Maha	Experimental investigation of reinforced concrete beams with spiral reinforcement in shear	585-594
Nguyen, Thanh Hai / Vu, Xuan Hong / Si Larbi, Amir / Ferrier, Emmanuel	Experimental study of the effect of simultaneous mechanical and high-temperature loadings on the behaviour of textile-reinforced concrete (TRC)	253-270
Zhang, Jiancheng / Jia, Jinqing	Experimental study on seismic behavior of composite frame consisting of SRC beams and SRUHSC columns subjected to cyclic loading	1055-1065
Peñaloza, Diego / Erlandsson, Martin / Falk, Andreas	Exploring the climate impact effects of increased use of bio-based materials in buildings	219-226
Liu, Xiaoyu / Yang, Zheng	Failure mechanism criterion for multiaxial strength of concrete after exposure to normal and high temperatures	105-118
Wang, Yanshuai / Ding, Weijian / Fang, Guohao / Liu, Yuqing / Xing, Feng / Dong, Biqin	Feasibility study on corrosion protection of steel bar in a self-immunity system based on increasing OH− content	742-748
Muñoz V., P. / Morales O., M. P. / Letelier G., V. / Mendívil G., M. A.	Fired clay bricks made by adding wastes: Assessment of the impact on physical, mechanical and thermal properties	241-252
Khan, M. Iqbal / Abbass, Wasim	Flexural behavior of high-strength concrete beams reinforced with a strain hardening cement-based composite layer	927-935
Anagnostopoulos, Costas A. / Sapidis, Giorgos / Papastergiadis, Efthimios	Fundamental properties of epoxy resin-modified cement grouts	184-195
Hossain, K. M. A. / Alam, S. / Anwar, M. S. / Julkarnine, K. M. Y.	High performance composite slabs with profiled steel deck and Engineered Cementitious Composite – Strength and shear bond characteristics	227-240
Zhu, Hongping / Zhang, Zixiang / Zhou, Fangyuan / Luo, Hui / Deng, Xuan	Horizontal mechanical behavior of elastomeric bearings under eccentric vertical loading: Full-scale tests and analytical modeling	574-584
Amoussou, Rétyce I. H. D. T. / Tanoue, Hiroshi / Sasaki, Mitsuru / Shigeishi, Mitsuhiro	Hydrothermal recovery of asphalt from asphalt concrete	1196-1204
Bourdot, Alexandra / Promis, Geoffrey / Tran Le, Anh Dung / Douzane, Omar / Benazzouk, Amar / Rosquoet, Frédéric / Langlet, Thierry	Hygrothermal properties of blocks based on eco-aggregates: Experimental and numerical study	279-289
Noufal E., Rahmathulla / Manju, Unnikrishnan	I-sand: An environment friendly alternative to river sand in Reinforced Cement Concrete constructions	1152-1157
Belayachi, Naima / Hoxha, Dashnor / Slaimia, Marouen	Impact of accelerated climatic aging on the behavior of gypsum plaster-straw material for building thermal insulation	912-918
Korah, L. V. / Nigay, P. M. / Cutard, T. / Nzihou, A. / Thomaß, S.	The impact of the particle shape of organic additives on the anisotropy of a clay ceramic and its thermal and mechanical properties	654-660
Wang, Yue / An, Mingzhe / Yu, Ziruo / Han, Song	Impacts of various factors on the rehydration of cement-based materials with a low water–binder ratio using mathematical models	160-167
Wang, Ru / Wang, Gaoyong	Influence and mechanism of zeolite on the setting and hardening process of styrene-acrylic ester/cement composite cementitious materials	757-765
Huseien, Ghasan Fahim / Mirza, Jahangir / Ismail, Mohmmed / Hussin, Mohd Warid	Influence of different curing temperatures and alkali activators on properties of GBFS geopolymer mortars containing fly ash and palm-oil fuel ash	1229-1240
Qu, H. P. / Chen, H. T. / Lang, Y. P.	Influence of Mn-Ni alloying elements on surface film and pitting resistance of Cr-Mn austenitic stainless steels	427-437
Ismael, R. / Silva, J. V. / Carmo, R. N. F. / Soldado, E. / Lourenço, C. / Costa, H. / Júlio, E.	Influence of nano-SiO2 and nano-Al2O3 additions on steel-to-concrete bonding	1080-1092
Zhong, Rui / Xu, Man / Vieira Netto, Roberto / Wille, Kay	Influence of pore tortuosity on hydraulic conductivity of pervious concrete: Characterization and modeling	1158-1168
Li, Qinghua / Zhao, Xin / Xu, Shilang / Gao, Xiang	Influence of steel fiber on dynamic compressive behavior of hybrid fiber ultra high toughness cementitious composites at different strain rates	490-500
Xu, Jinxia / Feng, Wei / Jiang, Linhua / Xu, Yi / Song, Yingbin / Cao, Yalong / Tan, Qiping	Influence of surfactants on chloride binding in cement paste	369-374
Volland, Svetlana	Influence of the mechanical activation of raw mixes on the properties of foam glass from sand sludge	119-126
Silva, Catarina / Branco, Jorge M. / Ringhofer, Andreas / Lourenço, Paulo B. / Schickhofer, Gerhard	The influences of moisture content variation, number and width of gaps on the withdrawal resistance of self tapping screws inserted in cross laminated timber	1205-1215
Park, Seung Hun / Kim, Dong joo / Kim, Sung Wook	Investigating the impact resistance of ultra-high-performance fiber-reinforced concrete using an improved strain energy impact test machine	145-159
Rashid, Khuram / Zhang, Dawei / Ueda, Tamon / Jin, Weiliang	Investigation on concrete-PCM interface under elevated temperature: At material level and member level	465-478
Hu, Jing / Liu, Pengfei / Wang, Dawei / Oeser, Markus / Tan, Yiqiu	Investigation on fatigue damage of asphalt mixture with different air-voids using microstructural analysis	936-945
Sala, Elisa / Zanotti, Cristina / Passoni, Chiara / Marini, Alessandra	Lightweight natural lime composites for rehabilitation of Historical Heritage	81-93
Cui, Liang / Fall, Mamadou	Mechanical and thermal properties of cemented tailings materials at early ages: Influence of initial temperature, curing stress and drainage conditions	553-563
Thomas, Job / Harilal, B.	Mechanical properties of cold bonded quarry dust aggregate concrete subjected to elevated temperature	724-730
Li, Ben / Mao, Jize / Nawa, Toyoharu / Liu, Zongmin	Mesoscopic chloride ion diffusion model of marine concrete subjected to freeze-thaw cycles	337-351
Gaedicke, Cristián / Torres, Anthony / Huynh, Khanh C. T. / Marines, Armando	A method to correlate splitting tensile strength and compressive strength of pervious concrete cylinders and cores	271-278
Akacem, Mustapha / Bouteldja, Mohamed / Cerezo, Veronique / Hachichi, Abdelkader	A method to use local low performances aggregates in asphalt pavements – An Algerian case study	290-298
Yang, Rongwei / Zhang, Zhiling / Xie, Meijie / Li, Kefei	Microstructural insights into the lime mortars mixed with sticky rice sol–gel or water: A comparative study	974-980
Smyl, Danny / Ghasemzadeh, Farnam / Pour-Ghaz, Mohammad	Modeling water absorption in concrete and mortar with distributed damage	438-449
Rahal, S. / Sellier, A. / Verdier, J.	Modelling of change in permeability induced by dilatancy for brittle geomaterials	613-624
Alogla, Kamal / Weekes, Laurence / Augusthus-Nelson, Levingshan	A new mitigation scheme to resist progressive collapse of RC structures	533-545
Merryfield, Gregory / El-Ragaby, Amr / Ghrib, Faouzi	New shear connector for Open Web Steel Joist with metal deck and concrete slab floor system	1-11
Guo, Yuxi / Zhang, Yihe / Huang, Hongwei / Meng, Xianghai / Liu, Yangyang / Tu, Shuchen / Li, Baoying	Novel glass ceramic foams materials based on polishing porcelain waste using the carbon ash waste as foaming agent	1093-1100
Sua-iam, Gritsada / Sokrai, Prakasit / Makul, Natt	Novel ternary blends of Type 1 Portland cement, residual rice husk ash, and limestone powder to improve the properties of self-compacting concrete	1028-1034
Sakai, Yuya / Kishi, Toshiharu	Numerical simulation of air permeability in covercrete assuming molecular flow in circular tubes	784-789
Barkoula, N.-M. / Ioannou, C. / Aggelis, D. G. / Matikas, T. E.	Optimization of nano-silica's addition in cement mortars and assessment of the failure process using acoustic emission monitoring	546-552
Iwański, Marek / Buczyński, Przemysław / Mazurek, Grzegorz	Optimization of the road binder used in the base layer in the road construction	1044-1054
Baite, Edem / Messan, Adamah / Hannawi, Kinda / Tsobnang, François / Prince, William	Physical and transfer properties of mortar containing coal bottom ash aggregates from Tefereyre (Niger)	919-926
Abhilash, H. N. / McGregor, F. / Millogo, Y. / Fabbri, A. / Séré, A. D. / Aubert, J. E. / Morel, J. C.	Physical, mechanical and hygrothermal properties of lateritic building stones (LBS) from Burkina Faso	731-741
Sanchez, L. F. M. / Fournier, B. / Jolin, M. / Bastien, J. / Mitchell, D.	Practical use of the Stiffness Damage Test (SDT) for assessing damage in concrete infrastructure affected by alkali-silica reaction	1178-1188
Lim, Chang-keun / Kim, Jin-Keun / Seo, Tae-Seok	Prediction of concrete adiabatic temperature rise characteristic by semi-adiabatic temperature rise test and FEM analysis	679-689
Li, Zhuguo / Cao, Guodong / Tan, Yuanqiang	Prediction of time-dependent flow behaviors of fresh concrete	510-519
Cao, Peng / Jin, Feng / Feng, Decheng / Zhou, Changjun / Hu, Weichao	Prediction on dynamic modulus of asphalt concrete with random aggregate modeling methods and virtual physics engine	987-997
Andal, Jonathan / Shehata, Medhat / Zacarias, Philip	Properties of concrete containing recycled concrete aggregate of preserved quality	842-855
Han, Baoguo / Zhang, Liqing / Zhang, Chenyu / Wang, Yunyang / Yu, Xun / Ou, Jinping	Reinforcement effect and mechanism of carbon fibers to mechanical and electrically conductive properties of cement-based materials	479-489
Wang, Tao / Jia, Hengqiong / Li, Honggang / Li, Haiyan / Shao, Piyan	Research on water seepage of cement asphalt emulsified (CA) mortar	595-599
Ouyang, Jian / Han, Baoguo / Cao, Yu / Zhou, Wenjie / Li, Wengui / Shah, Surendra P.	The role and interaction of superplasticizer and emulsifier in fresh cement asphalt emulsion paste through rheology study	643-653
Katkhuda, Hasan / Shatarat, Nasim	Shear behavior of reinforced concrete beams using treated recycled concrete aggregate	63-71
Waseem, Shakeel Ahmad / Singh, Bhupinder	Shear transfer strength of normal and high-strength recycled aggregate concrete – An experimental investigation	29-40
Huang, Puxi / Zeidler, Anita / Chang, Wen-Shao / Ansell, Martin P. / Chew, Y. M. J. / Shea, Andy	Specific heat capacity measurement of Phyllostachys edulis (Moso bamboo) by differential scanning calorimetry	821-831
Qin, Xi / Xu, Qianjun	Statistical analysis of initial defects between concrete layers of dam using X-ray computed tomography	1101-1113
Mohamad Nidzam, Rahmat / Norsalisma, Ismail / Kinuthia, John Mungai	Strength and environmental evaluation of stabilised Clay-PFA eco-friendly bricks	964-973
Nie, Qingke / Hu, Wei / Ai, Tao / Huang, Baoshan / Shu, Xiang / He, Qiang	Strength properties of geopolymers derived from original and desulfurized red mud cured at ambient temperature	905-911
Kumar, Sanjeev / Gupta, Ramesh Chandra / Shrivastava, Sandeep	Strength, abrasion and permeability studies on cement concrete containing quartz sandstone coarse aggregates	884-891
De Sutter, S. / Verbruggen, S. / Tysmans, T.	Structural behaviour of hybrid composite-concrete floors: Experimental validation and analytical simulation	790-799
Žvironaitė, Jadvyga / Grinys, Audrius / Ivanauskas, Ernestas / Kligys, Modestas	The sulfate resistance of various cementitious binders according to different performance indicators at Nordic countries conditions	361-368
Ogundiran, Mary B. / Kumar, Sanjay	Synthesis of fly ash-calcined clay geopolymers: Reactivity, mechanical strength, structural and microstructural characteristics	450-457
Khan, Musaad Zaheer Nazir / Shaikh, Faiz Uddin Ahmed / Hao, Yifei / Hao, Hong	Synthesis of high strength ambient cured geopolymer composite by using low calcium fly ash	809-820
Barra, Breno / Momm, Leto / Guerrero, Yader / Al-Qureshi, Hazim Ali / Mikowski, Alexandre / Michels, Rodrigo	Temperature implications on rheological-mechanical behavior and design of high modulus dense asphalt mix	135-144
Karim, Mohammad Razaul / Hashim, Huzaifa / Razak, Hashim Abdul	Thermal activation effect on palm oil clinker properties and their influence on strength development in cement mortar	670-678
Yu, Huayang / Leng, Zhen / Gao, Zheming	Thermal analysis on the component interaction of asphalt binders modified with crumb rubber and warm mix additives	168-174
Zheng, Keren / Chen, Lou / Gbozee, Mulbah	Thermal stability of geopolymers used as supporting materials for TiO2 film coating through sol-gel process: Feasibility and improvement	1114-1126
Ramirez Cardona, Diego / Di Benedetto, Hervé / Sauzéat, Cédric / Calon, Nicolas / Saussine, Gilles	Use of a bituminous mixture layer in high-speed line trackbeds	398-407
Khan, Mehran / Ali, Majid	Use of glass and nylon fibers in concrete for controlling early age micro cracking in bridge decks	800-808
Mastali, M. / Dalvand, A.	Use of silica fume and recycled steel fibers in self-compacting concrete (SCC)	196-209
Karahancer, Sebnem Sargin / Eriskin, Ekinhan / Sarioglu, Onur / Capali, Buket / Saltan, Mehmet / Terzi, Serdal	Utilization of Arundo donax in Hot Mix Asphalt as a fiber	981-986
Wang, Lei / Chen, Season S. / Tsang, Daniel C. W. / Poon, Chi Sun / Shih, Kaimin	Value-added recycling of construction waste wood into noise and thermal insulating cement-bonded particleboards	316-325
Rashad, Alaa M.	Vermiculite as a construction material – A short guide for Civil Engineer	53-62

Über diese
Datenseite
IssueID
22599
Veröffentlicht am:
15.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Oktober 2016

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Oktober 2016

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.