Construction and Building Materials - September 2016

Published:	September 2016

Articles in this Issue

Author(s)	Title	Page(s)
Kinnane, Oliver / Reilly, Aidan / Grimes, John / Pavía, Sara / Walker, Rosanne	Acoustic absorption of hemp-lime construction	674-682
Tragazikis, Ilias K. / Dassios, Konstantinos G. / Exarchos, Dimitrios A. / Dalla, Panagiota T. / Matikas, Theodore E.	Acoustic emission investigation of the mechanical performance of carbon nanotube-modified cement-based mortars	518-524
Parks, Joel E. / Papulak, Tyler / Pantelides, Chris P.	Acoustic emission monitoring of grouted splice sleeve connectors and reinforced precast concrete bridge assemblies	537-547
Kedarisetty, Sampat / Biligiri, Krishna Prapoorna / Sousa, Jorge B.	Advanced rheological characterization of Reacted and Activated Rubber (RAR) modified asphalt binders	12-22
Paiste, Päärn / Liira, Martin / Heinmaa, Ivo / Vahur, Signe / Kirsimäe, Kalle	Alkali activated construction materials: Assessing the alternative use for oil shale processing solid wastes	458-464
Serrano, Rubén / Cobo, Alfonso / Prieto, María Isabel / González, María de las Nieves	Analysis of fire resistance of concrete with polypropylene or steel fibers	302-309
Kot, P. / Ali, A. S. / Shaw, A. / Riley, M. / Alias, A.	The application of electromagnetic waves in monitoring water infiltration on concrete flat roof: The case of Malaysia	435-445
Iliopoulos, A. N. / Van Hemelrijck, D. / Vlassenbroeck, J. / Aggelis, D. G.	Assessment of grouted samples from monopile wind turbine foundations using combined non-destructive techniques	855-862
Hadi, Muhammad N. S. / Khan, Qasim S. / Sheikh, M. Neaz	Axial and flexural behavior of unreinforced and FRP bar reinforced circular concrete filled FRP tube columns	43-53
Tziviloglou, E. / Wiktor, V. / Jonkers, H. M. / Schlangen, E.	Bacteria-based self-healing concrete to increase liquid tightness of cracks	118-125
Javadian, Alireza / Wielopolski, Mateusz / Smith, Ian F. C. / Hebel, Dirk E.	Bond-behavior study of newly developed bamboo-composite reinforcement in concrete	110-117
Zheng, Jian-Jun / Zhang, Cong-Yan / Sun, Lin-Zhu / Zhou, Xin-Zhu	A Brownian motion simulation for the chloride diffusivity of concrete	478-487
Jin, Ming / Jiang, Linhua / Tao, Debiao / Bai, Shuya	Characterization of Ag/AgCl electrode manufactured by immersion in sodium hypochloride acid for monitoring chloride content in concrete	310-319
Yu, Xin / Liu, Shengjie / Dong, Fuqiang	Comparative assessment of rheological property characteristics for unfoamed and foamed asphalt binder	354-361
Tatar, Jovan / Hamilton, H. R.	Comparison of laboratory and field environmental conditioning on FRP-concrete bond durability	525-536
Loss, Cristiano / Piazza, Maurizio / Zandonini, Riccardo	Connections for steel–timber hybrid prefabricated buildings. Part I: Experimental tests	781-795
Loss, Cristiano / Piazza, Maurizio / Zandonini, Riccardo	Connections for steel–timber hybrid prefabricated buildings. Part II: Innovative modular structures	796-808
Jiang, Jiwang / Ni, Fujian / Gao, Lei / Lou, Shenxin	Developing an optional multiple repeated load test to evaluate permanent deformation of asphalt mixtures based on axle load spectrum	254-263
Zulli, Michele / Ghandehari, Masoud / Sidelev, Alexey / Shah, Surendra P.	Dimensional factors in oxidation induced fracture in reinforced concrete	264-272
Kallel, Taheni / Kallel, Abderrazek / Samet, Basma	Durability of mortars made with sand washing waste	728-735
Liu, Yiping / Ma, Dongpeng / Jiang, Zhenyu / Xiao, Fan / Huang, Xinxiong / Liu, Zejia / Tang, Liqun	Dynamic response of expanded polystyrene concrete during low speed impact	72-80
Uygunoğlu, Tayfun / Özgüven, Sevcan / Çalış, Metehan	Effect of plaster thickness on performance of external thermal insulation cladding systems (ETICS) in buildings	496-504
Xie, Jiting / Kayali, Obada	Effect of superplasticiser on workability enhancement of Class F and Class C fly ash-based geopolymers	36-42
Kanellopoulos, A. / Giannaros, P. / Al-Tabbaa, A.	The effect of varying volume fraction of microcapsules on fresh, mechanical and self-healing properties of mortars	577-593
Liu, Jun-zhe / Ba, Ming-fang / Du, Yin-gang / He, Zhi-min / Chen, Jian-bin	Effects of chloride ions on carbonation rate of hardened cement paste by X-ray CT techniques	619-627
Ohtsu, Masayasu	Elastic wave methods for NDE in concrete based on generalized theory of acoustic emission	845-854
Wang, Haopeng / Yang, Jun / Liao, Hui / Chen, Xianhua	Electrical and mechanical properties of asphalt concrete containing conductive fibers and fillers	184-190
Ban Cheah, Chee / Chung, Kok Yaw / Ramli, Mahyuddin / Lim, Gin Keat	The engineering properties and microstructure development of cement mortar containing high volume of inter-grinded GGBS and PFA cured at ambient temperature	683-693
Navarrete, Ivan / Lopez, Mauricio	Estimating the segregation of concrete based on mixture design and vibratory energy	384-390
Rafiee, Roham / Mazhari, Behzad	Evaluating long-term performance of Glass Fiber Reinforced Plastic pipes subjected to internal pressure	694-701
Hill, Brian / Buttlar, William G.	Evaluation of polymer modification in asphalt mixtures through digital image correlation and performance space diagrams	667-673
Jorne, Fernando / Henriques, Fernando M. A.	Evaluation of the grout injectability and types of resistance to grout flow	171-183
Christovasilis, I. P. / Brunetti, M. / Follesa, M. / Nocetti, M. / Vassallo, D.	Evaluation of the mechanical properties of cross laminated timber with elementary beam theories	202-213
Suchocki, Czesław / Katzer, Jacek	An example of harnessing Terrestrial Laser Scanner for remote sensing of saturation of chosen building materials	400-405
Rijal, Rajendra / Samali, Bijan / Shrestha, Rijun / Crews, Keith	Experimental and analytical study on dynamic performance of timber floor modules (timber beams)	391-399
Da, Bo / Yu, Hongfa / Ma, Haiyan / Tan, Yongshan / Mi, Renjie / Dou, Xuemei	Experimental investigation of whole stress-strain curves of coral concrete	81-89
Izzi, Matteo / Flatscher, Georg / Fragiacomo, Massimo / Schickhofer, Gerhard	Experimental investigations and design provisions of steel-to-timber joints with annular-ringed shank nails for Cross-Laminated Timber structures	446-457
Mahal, M. / Täljsten, B. / Blanksvärd, T.	Experimental performance of RC beams strengthened with FRP materials under monotonic and fatigue loads	126-139
Wang, Lei / Yi, Jin / Xia, Hailong / Fan, Lei	Experimental study of a pull-out test of corroded steel and concrete using the acoustic emission monitoring method	163-170
Sisti, Romina / Corradi, Marco / Borri, Antonio	An experimental study on the influence of composite materials used to reinforce masonry ring beams	231-241
Behnia, Arash / Ranjbar, Navid / Chai, Hwa Kian / Masaeli, Mahyar	Failure prediction and reliability analysis of ferrocement composite structures by incorporating machine learning into acoustic emission monitoring technique	823-832
Alberti, M. G. / Enfedaque, A. / Gálvez, J. C. / Agrawal, V.	Fibre distribution and orientation of macro-synthetic polyolefin fibre reinforced concrete elements	505-517
Zhu, Pengcheng / Fan, Hualin / Zhou, Yinzhi	Flexural behavior of aluminum I-beams strengthened by pre-stressed CFRP tendons	607-618
Ye, Hailong / Radlińska, Aleksandra	Fly ash-slag interaction during alkaline activation: Influence of activators on phase assemblage and microstructure formation	594-606
Mirmomeni, Mahsa / Heidarpour, Amin / Zhao, Xiao-Ling / Hutchinson, Christopher R. / Packer, Jeffrey A. / Wu, Chengqing	Fracture behaviour and microstructural evolution of structural mild steel under the multi-hazard loading of high-strain-rate load followed by elevated temperature	760-771
Kim, Dong joo / Park, Gi-Joon / Le, Huy Viet / Moon, Doyoung	Fresh and hardened properties of steel fiber-reinforced grouts containing ground granulated blast-furnace slag	332-342
Li, Ning / Ma, Biao / Wang, Yachuan / Si, Wei / Qin, Fang	Influence analyses of mixing approaches on properties of conventional and interlocking-dense concrete	465-472
Wang, Jiabin / Niu, Ditao	Influence of freeze–thaw cycles and sulfate corrosion resistance on shotcrete with and without steel fiber	628-636
Ma, Baoguo / Li, Hainan / Li, Xiangguo / Mei, Junpeng / Lv, Yang	Influence of nano-TiO2 on physical and hydration characteristics of fly ash–cement systems	242-253
Nie, Shuai / Hu, Shuguang / Wang, Fazhou / Yuan, Pan / Zhu, Yaohong / Ye, Junneng / Liu, Yunpeng	Internal curing – A suitable method for improving the performance of heat-cured concrete	294-301
Rao, S. Krishna / Sravana, P. / Rao, T. Chandrasekhar	Investigating the effect of M-sand on abrasion resistance of Roller Compacted Concrete containing GGBS	191-201
Ali Omar, Hend / Yusoff, Nur Izzi Md. / Ceylan, Halil / Sajuri, Zainuddin / Jakarni, Fauzan Mohd / Ismail, Amiruddin	Investigation of the relationship between fluidity and adhesion strength of unmodified and modified bitumens using the pull-off test method	140-148
Rashad, Alaa M. / Ouda, Ahmed S.	An investigation on alkali-activated fly ash pastes modified with quartz powder subjected to elevated temperatures	417-425
Lin, Juntao / Hong, Jinxiang / Liu, Jiaping / Wu, Shaopeng	Investigation on physical and chemical parameters to predict long-term aging of asphalt binder	753-759
Fazaeli, Hassan / Samin, Yousef / Pirnoun, Afshin / Dabiri, Asma Sadate	Laboratory and field evaluation of the warm fiber reinforced high performance asphalt mixtures (case study Karaj – Chaloos Road)	273-283
Skaf, M. / Ortega-López, V. / Fuente-Alonso, J. A. / Santamaría, A. / Manso, J. M.	Ladle furnace slag in asphalt mixes	488-495
Al-zharani, Traad Mohammed / Demirboğa, Ramazan / Khushefati, Waleed Hassan / Taylan, Osman	Measurement and prediction of correction factors for very high core compressive strength by using the adaptive neuro-fuzzy techniques	320-331
Chu, Hong-yan / Jiang, Jin-yang / Sun, Wei / Zhang, Mingzhong	Mechanical and physicochemical properties of ferro-siliceous concrete subjected to elevated temperatures	743-752
Sengul, Ozkan	Mechanical behavior of concretes containing waste steel fibers recovered from scrap tires	649-658
Govin, Alexandre / Bartholin, Marie-Claude / Biasotti, Barbara / Giudici, Max / Langella, Valentina / Grosseau, Philippe	Modification of water retention and rheological properties of fresh state cement-based mortars by guar gum derivatives	772-780
Ranz, J. / Aparicio, S. / Fuente, J. V. / Anaya, J. J. / Hernández, M. G.	Monitoring of the curing process in precast concrete slabs: An experimental study	406-416
Caratelli, Angelo / Meda, Alberto / Rinaldi, Zila	Monotonic and cyclic behaviour of lightweight concrete beams with and without steel fiber reinforcement	23-35
Pepe, Marco / Filho, Romildo Dias Toledo / Koenders, Eduardus A. B. / Martinelli, Enzo	A novel mix design methodology for Recycled Aggregate Concrete	362-372
Gu, Fan / Luo, Xue / Luo, Rong / Lytton, Robert L. / Hajj, Elie Y. / Siddharthan, Raj V.	Numerical modeling of geogrid-reinforced flexible pavement and corresponding validation using large-scale tank test	214-230
Saisi, Antonella / Gentile, Carmelo / Ruccolo, Antonello	Pre-diagnostic prompt investigation and static monitoring of a historic bell-tower	833-844
Lizarazo-Marriaga, Juan / García, Fredy / Higuera, Camilo	Preliminary electrochemical cementation of high volume fly ash mortars	54-62
da Costa, Eugênio Bastos / Rodríguez, Erich D. / Bernal, Susan A. / Provis, John L. / Gobbo, Luciano A. / Kirchheim, Ana Paula	Production and hydration of calcium sulfoaluminate-belite cements derived from aluminium anodising sludge	373-383
Park, Hyeoneun / Jeong, Yeonung / Jun, Yubin / Oh, Jae Eun	Production of price-competitive bricks using a high volume of stone powder sludge waste and blast furnace slag through cementless CaO activation	343-353
Xue, Peng / Xu, Anjun / He, Dongfeng / Yang, Qixing / Liu, Guiqun / Engström, Fredrik / Björkman, Bo	Research on the sintering process and characteristics of belite sulphoaluminate cement produced by BOF slag	567-576
Shukri, A. A. / Jumaat, M. Z.	Simulating concrete cover separation in RC beams strengthened with near-surface mounted reinforcements	1-11
Plank, J. / Zhang-Preße, M. / Ivleva, N. P. / Niessner, R.	Stability of single phase C3A hydrates against pressurized CO2	426-434
Liberatore, Domenico / Masini, Nicola / Sorrentino, Luigi / Racina, Vito / Sileo, Maria / AlShawa, Omar / Frezza, Luca	Static penetration test for historical masonry mortar	810-822
Lei, Wei-Sheng / Yu, Zhishui	A statistical approach to scaling size effect on strength of concrete incorporating spatial distribution of flaws	702-713
Moon, Juhyuk / Wang, Zhen / Kim, Min Ook / Chun, Sung-Chul	Strength enhancement of alkaline activated fly ash cured at ambient temperature by delayed activation of substituted OPC	659-666
Gattesco, Natalino / Boem, Ingrid	Stress distribution among sheathing-to-frame nails of timber shear walls related to different base connections: Experimental tests and numerical modelling	149-162
Nguyen, P. T. / Amiri, O.	Study of the chloride transport in unsaturated concrete: Highlighting of electrical double layer, temperature and hysteresis effects	284-293
Gao, Yingli / Huang, Liang / Zhang, Hailun	Study on anti-freezing functional design of phase change and temperature control composite bridge decks	714-720
Liu, Yurong / Liu, Jia	Synthesis of TEOS/PDMS-OH/CTAB composite coating material as a new stone consolidant formulation	90-94
Kodur, V. K. R. / Bhatt, P. P. / Soroushian, P. / Arablouei, A.	Temperature and stress development in ultra-high performance concrete during curing	63-71
Liu, Zhao-hui / Ding, Yi-dong / Wang, Fei / Deng, Zhi-ping	Thermal insulation material based on SiO2 aerogel	548-555
Cunha, Sandra / Aguiar, José B. / Tadeu, António	Thermal performance and cost analysis of mortars made with PCM and different binders	637-648
Seara-Paz, Sindy / González-Fonteboa, Belén / Martínez-Abella, Fernando / González-Taboada, Iris	Time-dependent behaviour of structural concrete made with recycled coarse aggregates. Creep and shrinkage	95-109
Xu, Peijun / Cong, Peiliang / Li, Danggang / Zhu, Xingtian	Toughness modification of hyperbranched polyester on epoxy asphalt	473-477
Zegardło, Bartosz / Szeląg, Maciej / Ogrodnik, Paweł	Ultra-high strength concrete made with recycled aggregate from sanitary ceramic wastes – The method of production and the interfacial transition zone	736-742
Cosme, Renée Lauret / Teixeira, Jamilla Emi Sudo Lutif / Calmon, João Luiz	Use of frequency sweep and MSCR tests to characterize asphalt mastics containing ornamental stone residues and LD steel slag	556-566
Keshavarzi, Behrooz / Kim, Y. Richard	A viscoelastic-based model for predicting the strength of asphalt concrete in direct tension	721-727

About this
data sheet
IssueID
22592
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - September 2016

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - September 2016

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.