Construction and Building Materials - September 2016

Erschienen:	September 2016

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Kinnane, Oliver / Reilly, Aidan / Grimes, John / Pavía, Sara / Walker, Rosanne	Acoustic absorption of hemp-lime construction	674-682
Tragazikis, Ilias K. / Dassios, Konstantinos G. / Exarchos, Dimitrios A. / Dalla, Panagiota T. / Matikas, Theodore E.	Acoustic emission investigation of the mechanical performance of carbon nanotube-modified cement-based mortars	518-524
Parks, Joel E. / Papulak, Tyler / Pantelides, Chris P.	Acoustic emission monitoring of grouted splice sleeve connectors and reinforced precast concrete bridge assemblies	537-547
Kedarisetty, Sampat / Biligiri, Krishna Prapoorna / Sousa, Jorge B.	Advanced rheological characterization of Reacted and Activated Rubber (RAR) modified asphalt binders	12-22
Paiste, Päärn / Liira, Martin / Heinmaa, Ivo / Vahur, Signe / Kirsimäe, Kalle	Alkali activated construction materials: Assessing the alternative use for oil shale processing solid wastes	458-464
Serrano, Rubén / Cobo, Alfonso / Prieto, María Isabel / González, María de las Nieves	Analysis of fire resistance of concrete with polypropylene or steel fibers	302-309
Kot, P. / Ali, A. S. / Shaw, A. / Riley, M. / Alias, A.	The application of electromagnetic waves in monitoring water infiltration on concrete flat roof: The case of Malaysia	435-445
Iliopoulos, A. N. / Van Hemelrijck, D. / Vlassenbroeck, J. / Aggelis, D. G.	Assessment of grouted samples from monopile wind turbine foundations using combined non-destructive techniques	855-862
Hadi, Muhammad N. S. / Khan, Qasim S. / Sheikh, M. Neaz	Axial and flexural behavior of unreinforced and FRP bar reinforced circular concrete filled FRP tube columns	43-53
Tziviloglou, E. / Wiktor, V. / Jonkers, H. M. / Schlangen, E.	Bacteria-based self-healing concrete to increase liquid tightness of cracks	118-125
Javadian, Alireza / Wielopolski, Mateusz / Smith, Ian F. C. / Hebel, Dirk E.	Bond-behavior study of newly developed bamboo-composite reinforcement in concrete	110-117
Zheng, Jian-Jun / Zhang, Cong-Yan / Sun, Lin-Zhu / Zhou, Xin-Zhu	A Brownian motion simulation for the chloride diffusivity of concrete	478-487
Jin, Ming / Jiang, Linhua / Tao, Debiao / Bai, Shuya	Characterization of Ag/AgCl electrode manufactured by immersion in sodium hypochloride acid for monitoring chloride content in concrete	310-319
Yu, Xin / Liu, Shengjie / Dong, Fuqiang	Comparative assessment of rheological property characteristics for unfoamed and foamed asphalt binder	354-361
Tatar, Jovan / Hamilton, H. R.	Comparison of laboratory and field environmental conditioning on FRP-concrete bond durability	525-536
Loss, Cristiano / Piazza, Maurizio / Zandonini, Riccardo	Connections for steel–timber hybrid prefabricated buildings. Part I: Experimental tests	781-795
Loss, Cristiano / Piazza, Maurizio / Zandonini, Riccardo	Connections for steel–timber hybrid prefabricated buildings. Part II: Innovative modular structures	796-808
Jiang, Jiwang / Ni, Fujian / Gao, Lei / Lou, Shenxin	Developing an optional multiple repeated load test to evaluate permanent deformation of asphalt mixtures based on axle load spectrum	254-263
Zulli, Michele / Ghandehari, Masoud / Sidelev, Alexey / Shah, Surendra P.	Dimensional factors in oxidation induced fracture in reinforced concrete	264-272
Kallel, Taheni / Kallel, Abderrazek / Samet, Basma	Durability of mortars made with sand washing waste	728-735
Liu, Yiping / Ma, Dongpeng / Jiang, Zhenyu / Xiao, Fan / Huang, Xinxiong / Liu, Zejia / Tang, Liqun	Dynamic response of expanded polystyrene concrete during low speed impact	72-80
Uygunoğlu, Tayfun / Özgüven, Sevcan / Çalış, Metehan	Effect of plaster thickness on performance of external thermal insulation cladding systems (ETICS) in buildings	496-504
Xie, Jiting / Kayali, Obada	Effect of superplasticiser on workability enhancement of Class F and Class C fly ash-based geopolymers	36-42
Kanellopoulos, A. / Giannaros, P. / Al-Tabbaa, A.	The effect of varying volume fraction of microcapsules on fresh, mechanical and self-healing properties of mortars	577-593
Liu, Jun-zhe / Ba, Ming-fang / Du, Yin-gang / He, Zhi-min / Chen, Jian-bin	Effects of chloride ions on carbonation rate of hardened cement paste by X-ray CT techniques	619-627
Ohtsu, Masayasu	Elastic wave methods for NDE in concrete based on generalized theory of acoustic emission	845-854
Wang, Haopeng / Yang, Jun / Liao, Hui / Chen, Xianhua	Electrical and mechanical properties of asphalt concrete containing conductive fibers and fillers	184-190
Ban Cheah, Chee / Chung, Kok Yaw / Ramli, Mahyuddin / Lim, Gin Keat	The engineering properties and microstructure development of cement mortar containing high volume of inter-grinded GGBS and PFA cured at ambient temperature	683-693
Navarrete, Ivan / Lopez, Mauricio	Estimating the segregation of concrete based on mixture design and vibratory energy	384-390
Rafiee, Roham / Mazhari, Behzad	Evaluating long-term performance of Glass Fiber Reinforced Plastic pipes subjected to internal pressure	694-701
Hill, Brian / Buttlar, William G.	Evaluation of polymer modification in asphalt mixtures through digital image correlation and performance space diagrams	667-673
Jorne, Fernando / Henriques, Fernando M. A.	Evaluation of the grout injectability and types of resistance to grout flow	171-183
Christovasilis, I. P. / Brunetti, M. / Follesa, M. / Nocetti, M. / Vassallo, D.	Evaluation of the mechanical properties of cross laminated timber with elementary beam theories	202-213
Suchocki, Czesław / Katzer, Jacek	An example of harnessing Terrestrial Laser Scanner for remote sensing of saturation of chosen building materials	400-405
Rijal, Rajendra / Samali, Bijan / Shrestha, Rijun / Crews, Keith	Experimental and analytical study on dynamic performance of timber floor modules (timber beams)	391-399
Da, Bo / Yu, Hongfa / Ma, Haiyan / Tan, Yongshan / Mi, Renjie / Dou, Xuemei	Experimental investigation of whole stress-strain curves of coral concrete	81-89
Izzi, Matteo / Flatscher, Georg / Fragiacomo, Massimo / Schickhofer, Gerhard	Experimental investigations and design provisions of steel-to-timber joints with annular-ringed shank nails for Cross-Laminated Timber structures	446-457
Mahal, M. / Täljsten, B. / Blanksvärd, T.	Experimental performance of RC beams strengthened with FRP materials under monotonic and fatigue loads	126-139
Wang, Lei / Yi, Jin / Xia, Hailong / Fan, Lei	Experimental study of a pull-out test of corroded steel and concrete using the acoustic emission monitoring method	163-170
Sisti, Romina / Corradi, Marco / Borri, Antonio	An experimental study on the influence of composite materials used to reinforce masonry ring beams	231-241
Behnia, Arash / Ranjbar, Navid / Chai, Hwa Kian / Masaeli, Mahyar	Failure prediction and reliability analysis of ferrocement composite structures by incorporating machine learning into acoustic emission monitoring technique	823-832
Alberti, M. G. / Enfedaque, A. / Gálvez, J. C. / Agrawal, V.	Fibre distribution and orientation of macro-synthetic polyolefin fibre reinforced concrete elements	505-517
Zhu, Pengcheng / Fan, Hualin / Zhou, Yinzhi	Flexural behavior of aluminum I-beams strengthened by pre-stressed CFRP tendons	607-618
Ye, Hailong / Radlińska, Aleksandra	Fly ash-slag interaction during alkaline activation: Influence of activators on phase assemblage and microstructure formation	594-606
Mirmomeni, Mahsa / Heidarpour, Amin / Zhao, Xiao-Ling / Hutchinson, Christopher R. / Packer, Jeffrey A. / Wu, Chengqing	Fracture behaviour and microstructural evolution of structural mild steel under the multi-hazard loading of high-strain-rate load followed by elevated temperature	760-771
Kim, Dong joo / Park, Gi-Joon / Le, Huy Viet / Moon, Doyoung	Fresh and hardened properties of steel fiber-reinforced grouts containing ground granulated blast-furnace slag	332-342
Li, Ning / Ma, Biao / Wang, Yachuan / Si, Wei / Qin, Fang	Influence analyses of mixing approaches on properties of conventional and interlocking-dense concrete	465-472
Wang, Jiabin / Niu, Ditao	Influence of freeze–thaw cycles and sulfate corrosion resistance on shotcrete with and without steel fiber	628-636
Ma, Baoguo / Li, Hainan / Li, Xiangguo / Mei, Junpeng / Lv, Yang	Influence of nano-TiO2 on physical and hydration characteristics of fly ash–cement systems	242-253
Nie, Shuai / Hu, Shuguang / Wang, Fazhou / Yuan, Pan / Zhu, Yaohong / Ye, Junneng / Liu, Yunpeng	Internal curing – A suitable method for improving the performance of heat-cured concrete	294-301
Rao, S. Krishna / Sravana, P. / Rao, T. Chandrasekhar	Investigating the effect of M-sand on abrasion resistance of Roller Compacted Concrete containing GGBS	191-201
Ali Omar, Hend / Yusoff, Nur Izzi Md. / Ceylan, Halil / Sajuri, Zainuddin / Jakarni, Fauzan Mohd / Ismail, Amiruddin	Investigation of the relationship between fluidity and adhesion strength of unmodified and modified bitumens using the pull-off test method	140-148
Rashad, Alaa M. / Ouda, Ahmed S.	An investigation on alkali-activated fly ash pastes modified with quartz powder subjected to elevated temperatures	417-425
Lin, Juntao / Hong, Jinxiang / Liu, Jiaping / Wu, Shaopeng	Investigation on physical and chemical parameters to predict long-term aging of asphalt binder	753-759
Fazaeli, Hassan / Samin, Yousef / Pirnoun, Afshin / Dabiri, Asma Sadate	Laboratory and field evaluation of the warm fiber reinforced high performance asphalt mixtures (case study Karaj – Chaloos Road)	273-283
Skaf, M. / Ortega-López, V. / Fuente-Alonso, J. A. / Santamaría, A. / Manso, J. M.	Ladle furnace slag in asphalt mixes	488-495
Al-zharani, Traad Mohammed / Demirboğa, Ramazan / Khushefati, Waleed Hassan / Taylan, Osman	Measurement and prediction of correction factors for very high core compressive strength by using the adaptive neuro-fuzzy techniques	320-331
Chu, Hong-yan / Jiang, Jin-yang / Sun, Wei / Zhang, Mingzhong	Mechanical and physicochemical properties of ferro-siliceous concrete subjected to elevated temperatures	743-752
Sengul, Ozkan	Mechanical behavior of concretes containing waste steel fibers recovered from scrap tires	649-658
Govin, Alexandre / Bartholin, Marie-Claude / Biasotti, Barbara / Giudici, Max / Langella, Valentina / Grosseau, Philippe	Modification of water retention and rheological properties of fresh state cement-based mortars by guar gum derivatives	772-780
Ranz, J. / Aparicio, S. / Fuente, J. V. / Anaya, J. J. / Hernández, M. G.	Monitoring of the curing process in precast concrete slabs: An experimental study	406-416
Caratelli, Angelo / Meda, Alberto / Rinaldi, Zila	Monotonic and cyclic behaviour of lightweight concrete beams with and without steel fiber reinforcement	23-35
Pepe, Marco / Filho, Romildo Dias Toledo / Koenders, Eduardus A. B. / Martinelli, Enzo	A novel mix design methodology for Recycled Aggregate Concrete	362-372
Gu, Fan / Luo, Xue / Luo, Rong / Lytton, Robert L. / Hajj, Elie Y. / Siddharthan, Raj V.	Numerical modeling of geogrid-reinforced flexible pavement and corresponding validation using large-scale tank test	214-230
Saisi, Antonella / Gentile, Carmelo / Ruccolo, Antonello	Pre-diagnostic prompt investigation and static monitoring of a historic bell-tower	833-844
Lizarazo-Marriaga, Juan / García, Fredy / Higuera, Camilo	Preliminary electrochemical cementation of high volume fly ash mortars	54-62
da Costa, Eugênio Bastos / Rodríguez, Erich D. / Bernal, Susan A. / Provis, John L. / Gobbo, Luciano A. / Kirchheim, Ana Paula	Production and hydration of calcium sulfoaluminate-belite cements derived from aluminium anodising sludge	373-383
Park, Hyeoneun / Jeong, Yeonung / Jun, Yubin / Oh, Jae Eun	Production of price-competitive bricks using a high volume of stone powder sludge waste and blast furnace slag through cementless CaO activation	343-353
Xue, Peng / Xu, Anjun / He, Dongfeng / Yang, Qixing / Liu, Guiqun / Engström, Fredrik / Björkman, Bo	Research on the sintering process and characteristics of belite sulphoaluminate cement produced by BOF slag	567-576
Shukri, A. A. / Jumaat, M. Z.	Simulating concrete cover separation in RC beams strengthened with near-surface mounted reinforcements	1-11
Plank, J. / Zhang-Preße, M. / Ivleva, N. P. / Niessner, R.	Stability of single phase C3A hydrates against pressurized CO2	426-434
Liberatore, Domenico / Masini, Nicola / Sorrentino, Luigi / Racina, Vito / Sileo, Maria / AlShawa, Omar / Frezza, Luca	Static penetration test for historical masonry mortar	810-822
Lei, Wei-Sheng / Yu, Zhishui	A statistical approach to scaling size effect on strength of concrete incorporating spatial distribution of flaws	702-713
Moon, Juhyuk / Wang, Zhen / Kim, Min Ook / Chun, Sung-Chul	Strength enhancement of alkaline activated fly ash cured at ambient temperature by delayed activation of substituted OPC	659-666
Gattesco, Natalino / Boem, Ingrid	Stress distribution among sheathing-to-frame nails of timber shear walls related to different base connections: Experimental tests and numerical modelling	149-162
Nguyen, P. T. / Amiri, O.	Study of the chloride transport in unsaturated concrete: Highlighting of electrical double layer, temperature and hysteresis effects	284-293
Gao, Yingli / Huang, Liang / Zhang, Hailun	Study on anti-freezing functional design of phase change and temperature control composite bridge decks	714-720
Liu, Yurong / Liu, Jia	Synthesis of TEOS/PDMS-OH/CTAB composite coating material as a new stone consolidant formulation	90-94
Kodur, V. K. R. / Bhatt, P. P. / Soroushian, P. / Arablouei, A.	Temperature and stress development in ultra-high performance concrete during curing	63-71
Liu, Zhao-hui / Ding, Yi-dong / Wang, Fei / Deng, Zhi-ping	Thermal insulation material based on SiO2 aerogel	548-555
Cunha, Sandra / Aguiar, José B. / Tadeu, António	Thermal performance and cost analysis of mortars made with PCM and different binders	637-648
Seara-Paz, Sindy / González-Fonteboa, Belén / Martínez-Abella, Fernando / González-Taboada, Iris	Time-dependent behaviour of structural concrete made with recycled coarse aggregates. Creep and shrinkage	95-109
Xu, Peijun / Cong, Peiliang / Li, Danggang / Zhu, Xingtian	Toughness modification of hyperbranched polyester on epoxy asphalt	473-477
Zegardło, Bartosz / Szeląg, Maciej / Ogrodnik, Paweł	Ultra-high strength concrete made with recycled aggregate from sanitary ceramic wastes – The method of production and the interfacial transition zone	736-742
Cosme, Renée Lauret / Teixeira, Jamilla Emi Sudo Lutif / Calmon, João Luiz	Use of frequency sweep and MSCR tests to characterize asphalt mastics containing ornamental stone residues and LD steel slag	556-566
Keshavarzi, Behrooz / Kim, Y. Richard	A viscoelastic-based model for predicting the strength of asphalt concrete in direct tension	721-727

Über diese
Datenseite
IssueID
22592
Veröffentlicht am:
15.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - September 2016

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - September 2016

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.