Construction and Building Materials - September 2016

Published:	September 2016

Articles in this Issue

Author(s)	Title	Page(s)
Richardson, Alan / Coventry, Kathryn / Lamb, Thomas / Mackenzie, David	The addition of synthetic fibres to concrete to improve impact/ballistic toughness	612-621
Liu, Zhichao / Hansen, Will	Aggregate and slag cement effects on autogenous shrinkage in cementitious materials	429-436
Choi, Pangil / Kim, Dong-Ho / Lee, Bong-Hak / Won, Moon C.	Application of ultrasonic shear-wave tomography to identify horizontal crack or delamination in concrete pavement and bridge	81-91
Teguedi, Mohamed Cheikh / Blaysat, Benoît / Toussaint, Evelyne / Moreira, Sylvain / Liandrat, Sébastien / Grédiac, Michel	Applying a full-field measurement technique for studying the local deformation in reclaimed asphalt pavements	547-558
Singh, Navdeep / Singh, S. P.	Carbonation and electrical resistance of self compacting concrete made with recycled concrete aggregates and metakaolin	400-409
Deng, Zongcai / Shi, Feng / Yin, Shi / Tuladhar, Rabin	Characterisation of macro polyolefin fibre reinforcement in concrete through round determinate panel test	229-235
Zeng, Shixin / Wang, Jialai	Characterization of mechanical and electric properties of geopolymers synthesized using four locally available fly ashes	386-399
Ramli, Mahyuddin B. / Alonge, O. Richard	Characterization of metakaolin and study on early age mechanical strength of hybrid cementitious composites	599-611
Chen, Dar Hao / Scullion, Tom / Nam, Boo Hyun	Characterization of structural conditions for pavement rehabilitations	664-675
Liu, Jianzhong / Han, Fangyu / Cui, Gong / Zhang, Qianqian / Lv, Jin / Zhang, Lihui / Yang, Zhiqian	Combined effect of coarse aggregate and fiber on tensile behavior of ultra-high performance concrete	310-318
Felekoğlu, Burak / Tosun-Felekoğlu, Kamile / Keskinateş, Muhammer / Gödek, Eren	A comparative study on the compatibility of PVA and HTPP fibers with various cementitious matrices under flexural loads	423-428
Nikbin, Iman M. / Rahimi R., Saman / Allahyari, Hamed / Damadi, Mohammad	A comprehensive analytical study on the mechanical properties of concrete containing waste bottom ash as natural aggregate replacement	746-759
Donkor, Peter / Obonyo, Esther	Compressed soil blocks: Influence of fibers on flexural properties and failure mechanism	25-33
Li, Xinxin / Xu, Yi / Chen, Shenghong	Computational homogenization of effective permeability in three-phase mesoscale concrete	100-111
Real, Sofia / Gomes, M. Glória / Moret Rodrigues, A. / Bogas, J. Alexandre	Contribution of structural lightweight aggregate concrete to the reduction of thermal bridging effect in buildings	460-470
Aguirre-Guerrero, Ana María / Mejía-de-Gutiérrez, Ruby / Montês-Correia, Maria João Ribeiro	Corrosion performance of blended concretes exposed to different aggressive environments	704-716
Masi, Angelo / Chiauzzi, Leonardo / Manfredi, Vincenzo	Criteria for identifying concrete homogeneous areas for the estimation of in-situ strength in RC buildings	576-587
Hainin, Mohd Rosli / Oluwasola, Ebenezer Akin / Brown, E. Ray	Density profile of hot mix asphalt layer during compaction with various types of rollers and lift thickness	265-277
Guan, Cheng / Zhang, Houjiang / Hunt, John F. / Yan, Haicheng	Determining shear modulus of thin wood composite materials using a cantilever beam vibration method	285-289
Musiał, Michał / Grosel, Jacek	Determining the Young's modulus of concrete by measuring the eigenfrequencies of concrete and reinforced concrete beams	44-52
Li, Changming / Wang, Lijiu / Zhang, Tingting / Dong, Jingliang	Development of building material utilizing a low pozzolanic activity mineral	300-309
Avirneni, Deepti / Peddinti, Pranav R. T. / Saride, Sireesh	Durability and long term performance of geopolymer stabilized reclaimed asphalt pavement base courses	198-209
Qasrawi, Hisham / Asi, Ibrahim	Effect of bitumen grade on hot asphalt mixes properties prepared using recycled coarse concrete aggregate	18-24
Yang, Ping / Li, Tianbin / Song, Li / Deng, Tao / Xue, Shoubao	Effect of different factors on propagation of carbon fiber composite cement grout in a fracture with flowing water	501-506
Jayasree, S. / Ganesan, N. / Abraham, Ruby	Effect of ferrocement jacketing on the flexural behaviour of beams with corroded reinforcements	92-99
Chen, Wenwu / Dai, Pengfei / Yuan, Pengbo / Zhang, Jingke	Effect of inorganic silicate consolidation on the mechanical and durability performance of sandstone used in historical sites	445-452
Adu-Amankwah, Samuel / Khatib, Jamal M. / Searle, David E. / Black, Leon	Effect of synthesis parameters on the performance of alkali-activated non-conformant EN 450 pulverised fuel ash	453-459
Aliabdo, Ali A. / Abd Elmoaty, Abd Elmoaty M. / Salem, Hazem A.	Effect of water addition, plasticizer and alkaline solution constitution on fly ash based geopolymer concrete performance	694-703
Yan, Yu / Chun, Sanghyun / Roque, Reynaldo / Kim, Sungho	Effects of alternative polymer modifications on cracking performance of asphalt binders and resultant mixtures	569-575
Hua, Sudong / Wang, Kejin / Yao, Xiao / Xu, Wen / He, Yuxin	Effects of fibers on mechanical properties and freeze-thaw resistance of phosphogypsum-slag based cementitious materials	290-299
Qureshi, T. S. / Kanellopoulos, A. / Al-Tabbaa, A.	Encapsulation of expansive powder minerals within a concentric glass capsule system for self-healing concrete	629-643
Timakul, Patthamaporn / Rattanaprasit, Weerada / Aungkavattana, Pavadee	Enhancement of compressive strength and thermal shock resistance of fly ash-based geopolymer composites	653-658
Koohestani, Babak / Koubaa, Ahmed / Belem, Tikou / Bussière, Bruno / Bouzahzah, Hassan	Experimental investigation of mechanical and microstructural properties of cemented paste backfill containing maple-wood filler	222-228
Yang, Shu-Yan / Song, Xiao-Bing / Jia, Hong-Xue / Chen, Xi / Liu, Xi-La	Experimental research on hysteretic behaviors of corroded reinforced concrete columns with different maximum amounts of corrosion of rebar	319-327
Liu, Ning / Chen, Bing	Experimental research on magnesium phosphate cements containing alumina	354-360
Islam, Mohammad S. / Ghafoori, Nader	Experimental study and empirical modeling of lithium nitrate for alkali-silica reactivity	717-726
Wang, Ying-Yuan / Su, Jun-Feng / Schlangen, Erik / Han, Ning-Xu / Han, Shan / Li, Wei	Fabrication and characterization of self-healing microcapsules containing bituminous rejuvenator by a nano-inorganic/organic hybrid method	471-482
Zhang, Y. M. / Jia, L. T. / Mei, H. / Cui, Q. / Zhang, P. G. / Sun, Z. M.	Fabrication, microstructure and properties of bricks fired from lake sediment, cinder and sewage sludge	154-160
Colombo, Mattia / Valente, Tiago / Barros, Joaquim A. O. / Aprile, Alessandra / Lourenço, Lúcio	Fibre reinforced mortar application for out-of-plane strengthening of schist walls	185-197
Antunes, Giselle R. / Masuero, Ângela B.	Flexural tensile strength in mortar coating reinforced with different types of metal mesh: A statistical comparison	559-568
Jugulkar, Lalitkumar Maikulal / Singh, Shankar / Sawant, Suresh M.	Fluid flow modeling and experimental investigation on automobile damper	760-772
Zhang, Zengqi / Zhang, Bo / Yan, Peiyu	Hydration and microstructures of concrete containing raw or densified silica fume at different curing temperatures	483-490
Wang, Chao / Zhang, Han / Castorena, Cassie / Zhang, Jinxi / Kim, Y. Richard	Identifying fatigue failure in asphalt binder time sweep tests	535-546
Allali, F. / Joussein, E. / Idrissi Kandri, N. / Rossignol, S.	The influence of calcium content on the mixture of sodium silicate with different additives: Na 2 CO 3 , NaOH and AlO(OH)	588-598
Jokūbaitis, Aidas / Marčiukaitis, Gediminas / Valivonis, Juozas	Influence of technological and environmental factors on the behaviour of the reinforcement anchorage zone of prestressed concrete sleepers	507-518
Luo, Mian / Qian, Chunxiang	Influences of bacteria-based self-healing agents on cementitious materials hydration kinetics and compressive strength	659-663
Huang, Hua / Liu, Boquan / Xi, Kailin / Wu, Tao	Interfacial tensile bond behavior of permeable polymer mortar to concrete	210-221
Amin, Ibrahim / El-Badawy, Sherif M. / Breakah, Tamer / Ibrahim, Mourad H. Z.	Laboratory evaluation of asphalt binder modified with carbon nanotubes for Egyptian climate	361-372
Yehia, Sherif / Douba, AlaEddin / Abdullahi, Omar / Farrag, Sharef	Mechanical and durability evaluation of fiber-reinforced self-compacting concrete	120-133
Smarzewski, Piotr / Barnat-Hunek, Danuta	Mechanical and durability related properties of high performance concrete made with coal cinder and waste foundry sand	9-17
Li, Hai-tao / Chen, Guo / Zhang, Qisheng / Ashraf, Mahmud / Xu, Bin / Li, Yanjun	Mechanical properties of laminated bamboo lumber column under radial eccentric compression	644-652
Arora, Aashay / Vance, Kirk / Sant, Gaurav / Neithalath, Narayanan	A methodology to extract the component size distributions in interground composite (limestone) cements	328-337
Zhan, Qiwei / Qian, Chunxiang / Yi, Haihe	Microbial-induced mineralization and cementation of fugitive dust and engineering application	437-444
Xu, Guangji / Wang, Hao	Molecular dynamics study of interfacial mechanical behavior between asphalt binder and mineral aggregate	246-254
Ballarini, Roberto / Pisano, Gabriele / Royer Carfagni, Gianni	New calibration of partial material factors for the structural design of float glass. Comparison of bounded and unbounded statistics for glass strength	69-80
Saboo, Nikhil / Das, Bhaskar Pratim / Kumar, Praveen	New phenomenological approach for modeling fatigue life of asphalt mixes	134-142
Hashemi, Ashkan / Masoudnia, Reza / Quenneville, Pierre	A numerical study of coupled timber walls with slip friction damping devices	373-385
Li, Han / Tian, Shengze / Dang, Xinzhi / Yuan, Wancheng / Wei, Kai	Performance of steel mesh reinforced elastomeric isolation bearing: Experimental study	60-68
Bendimerad, Ahmed Z. / Roziere, Emmanuel / Loukili, Ahmed	Plastic shrinkage and cracking risk of recycled aggregates concrete	733-745
Carbonell-Márquez, J. F. / Gil-Martín, L. M. / Fernández-Ruiz, M. A. / Hernández-Montes, E.	Procedure for the assessment of the residual capacity of corroded B-regions in RC structures	519-534
Siddique, Rafat / Singh, Karambir / Singh, Malkit / Corinaldesi, Valeria / Rajor, Anita	Properties of bacterial rice husk ash concrete	112-119
Latif Al-Mufti, R. / Fried, A. N.	Pulse velocity assessment of early age creep of concrete	622-628
Zhang, Jun / Faruk, Abu N. M. / Karki, Pravat / Holleran, Irina / Hu, Xiaodi / Walubita, Lubinda F.	Relating asphalt binder elastic recovery properties to HMA cracking and fracture properties	236-245
Manosalvas-Paredes, Mario / Gallego, Juan / Saiz, Leticia / Bermejo, José Ma	Rubber modified binders as an alternative to cellulose fiber – SBS polymers in Stone Matrix Asphalt	727-732
Yoo, Doo-Yeol / Banthia, Nemkumar / Yang, Jun-Mo / Yoon, Young-Soo	Size effect in normal- and high-strength amorphous metallic and steel fiber reinforced concrete beams	676-685
Kutuk-Sert, T.	Stability analyses of submicron-boron mineral prepared by mechanical milling process in concrete roads	255-264
Lee, Cheol-Ho / Kang, Thomas H.-K. / Kim, Sung-Yong / Kang, Kiyong	Strain compatibility method for the design of short rectangular concrete-filled tube columns under eccentric axial loads	143-153
Chen, Ju / Wang, Jun / Jin, Wei-liang	Study of magnetically driven concrete	53-59
Wang, Hainian / Zhang, Ran / Chen, Yu / You, Zhanping / Fang, Jun	Study on microstructure of rubberized recycled hot mix asphalt based X-ray CT technology	177-184
Rashad, Alaa M.	A synopsis about perlite as building material – A best practice guide for Civil Engineer	338-353
Bilotta, Antonio / de Silva, Donatella / Nigro, Emidio	Tests on intumescent paints for fire protection of existing steel structures	410-422
Vo, Loan T. T. / Navard, Patrick	Treatments of plant biomass for cementitious building materials – A review	161-176
Matalkah, Faris / Soroushian, Parviz / Ul Abideen, Saqib / Peyvandi, Amirpasha	Use of non-wood biomass combustion ash in development of alkali-activated concrete	491-500
Yazdanbakhsh, Ardavan / Bank, Lawrence C. / Chen, Chen	Use of recycled FRP reinforcing bar in concrete as coarse aggregate and its impact on the mechanical properties of concrete	278-284
Zaharaki, Dimitra / Galetakis, Michalis / Komnitsas, Kostas	Valorization of construction and demolition (C&D) and industrial wastes through alkali activation	686-693
Martínez-López, Miguel / Martínez-Barrera, Gonzalo / Barrera-Díaz, Carlos / Ureña-Núñez, Fernando / Reis, João Marciano Laredo dos	Waste Tetra Pak particles from beverage containers as reinforcements in polymer mortar: Effect of gamma irradiation as an interfacial coupling factor	1-8
Klein, Nayara S. / Cavalaro, Sergio / Aguado, Antonio / Segura, Ignacio / Toralles, Berenice	The wetting water in cement-based materials: Modeling and experimental validation	34-43

About this
data sheet
IssueID
22591
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - September 2016

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - September 2016

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.