Construction and Building Materials - septembre 2016

Publié:	septembre 2016

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Richardson, Alan / Coventry, Kathryn / Lamb, Thomas / Mackenzie, David	The addition of synthetic fibres to concrete to improve impact/ballistic toughness	612-621
Liu, Zhichao / Hansen, Will	Aggregate and slag cement effects on autogenous shrinkage in cementitious materials	429-436
Choi, Pangil / Kim, Dong-Ho / Lee, Bong-Hak / Won, Moon C.	Application of ultrasonic shear-wave tomography to identify horizontal crack or delamination in concrete pavement and bridge	81-91
Teguedi, Mohamed Cheikh / Blaysat, Benoît / Toussaint, Evelyne / Moreira, Sylvain / Liandrat, Sébastien / Grédiac, Michel	Applying a full-field measurement technique for studying the local deformation in reclaimed asphalt pavements	547-558
Singh, Navdeep / Singh, S. P.	Carbonation and electrical resistance of self compacting concrete made with recycled concrete aggregates and metakaolin	400-409
Deng, Zongcai / Shi, Feng / Yin, Shi / Tuladhar, Rabin	Characterisation of macro polyolefin fibre reinforcement in concrete through round determinate panel test	229-235
Zeng, Shixin / Wang, Jialai	Characterization of mechanical and electric properties of geopolymers synthesized using four locally available fly ashes	386-399
Ramli, Mahyuddin B. / Alonge, O. Richard	Characterization of metakaolin and study on early age mechanical strength of hybrid cementitious composites	599-611
Chen, Dar Hao / Scullion, Tom / Nam, Boo Hyun	Characterization of structural conditions for pavement rehabilitations	664-675
Liu, Jianzhong / Han, Fangyu / Cui, Gong / Zhang, Qianqian / Lv, Jin / Zhang, Lihui / Yang, Zhiqian	Combined effect of coarse aggregate and fiber on tensile behavior of ultra-high performance concrete	310-318
Felekoğlu, Burak / Tosun-Felekoğlu, Kamile / Keskinateş, Muhammer / Gödek, Eren	A comparative study on the compatibility of PVA and HTPP fibers with various cementitious matrices under flexural loads	423-428
Nikbin, Iman M. / Rahimi R., Saman / Allahyari, Hamed / Damadi, Mohammad	A comprehensive analytical study on the mechanical properties of concrete containing waste bottom ash as natural aggregate replacement	746-759
Donkor, Peter / Obonyo, Esther	Compressed soil blocks: Influence of fibers on flexural properties and failure mechanism	25-33
Li, Xinxin / Xu, Yi / Chen, Shenghong	Computational homogenization of effective permeability in three-phase mesoscale concrete	100-111
Real, Sofia / Gomes, M. Glória / Moret Rodrigues, A. / Bogas, J. Alexandre	Contribution of structural lightweight aggregate concrete to the reduction of thermal bridging effect in buildings	460-470
Aguirre-Guerrero, Ana María / Mejía-de-Gutiérrez, Ruby / Montês-Correia, Maria João Ribeiro	Corrosion performance of blended concretes exposed to different aggressive environments	704-716
Masi, Angelo / Chiauzzi, Leonardo / Manfredi, Vincenzo	Criteria for identifying concrete homogeneous areas for the estimation of in-situ strength in RC buildings	576-587
Hainin, Mohd Rosli / Oluwasola, Ebenezer Akin / Brown, E. Ray	Density profile of hot mix asphalt layer during compaction with various types of rollers and lift thickness	265-277
Guan, Cheng / Zhang, Houjiang / Hunt, John F. / Yan, Haicheng	Determining shear modulus of thin wood composite materials using a cantilever beam vibration method	285-289
Musiał, Michał / Grosel, Jacek	Determining the Young's modulus of concrete by measuring the eigenfrequencies of concrete and reinforced concrete beams	44-52
Li, Changming / Wang, Lijiu / Zhang, Tingting / Dong, Jingliang	Development of building material utilizing a low pozzolanic activity mineral	300-309
Avirneni, Deepti / Peddinti, Pranav R. T. / Saride, Sireesh	Durability and long term performance of geopolymer stabilized reclaimed asphalt pavement base courses	198-209
Qasrawi, Hisham / Asi, Ibrahim	Effect of bitumen grade on hot asphalt mixes properties prepared using recycled coarse concrete aggregate	18-24
Yang, Ping / Li, Tianbin / Song, Li / Deng, Tao / Xue, Shoubao	Effect of different factors on propagation of carbon fiber composite cement grout in a fracture with flowing water	501-506
Jayasree, S. / Ganesan, N. / Abraham, Ruby	Effect of ferrocement jacketing on the flexural behaviour of beams with corroded reinforcements	92-99
Chen, Wenwu / Dai, Pengfei / Yuan, Pengbo / Zhang, Jingke	Effect of inorganic silicate consolidation on the mechanical and durability performance of sandstone used in historical sites	445-452
Adu-Amankwah, Samuel / Khatib, Jamal M. / Searle, David E. / Black, Leon	Effect of synthesis parameters on the performance of alkali-activated non-conformant EN 450 pulverised fuel ash	453-459
Aliabdo, Ali A. / Abd Elmoaty, Abd Elmoaty M. / Salem, Hazem A.	Effect of water addition, plasticizer and alkaline solution constitution on fly ash based geopolymer concrete performance	694-703
Yan, Yu / Chun, Sanghyun / Roque, Reynaldo / Kim, Sungho	Effects of alternative polymer modifications on cracking performance of asphalt binders and resultant mixtures	569-575
Hua, Sudong / Wang, Kejin / Yao, Xiao / Xu, Wen / He, Yuxin	Effects of fibers on mechanical properties and freeze-thaw resistance of phosphogypsum-slag based cementitious materials	290-299
Qureshi, T. S. / Kanellopoulos, A. / Al-Tabbaa, A.	Encapsulation of expansive powder minerals within a concentric glass capsule system for self-healing concrete	629-643
Timakul, Patthamaporn / Rattanaprasit, Weerada / Aungkavattana, Pavadee	Enhancement of compressive strength and thermal shock resistance of fly ash-based geopolymer composites	653-658
Koohestani, Babak / Koubaa, Ahmed / Belem, Tikou / Bussière, Bruno / Bouzahzah, Hassan	Experimental investigation of mechanical and microstructural properties of cemented paste backfill containing maple-wood filler	222-228
Yang, Shu-Yan / Song, Xiao-Bing / Jia, Hong-Xue / Chen, Xi / Liu, Xi-La	Experimental research on hysteretic behaviors of corroded reinforced concrete columns with different maximum amounts of corrosion of rebar	319-327
Liu, Ning / Chen, Bing	Experimental research on magnesium phosphate cements containing alumina	354-360
Islam, Mohammad S. / Ghafoori, Nader	Experimental study and empirical modeling of lithium nitrate for alkali-silica reactivity	717-726
Wang, Ying-Yuan / Su, Jun-Feng / Schlangen, Erik / Han, Ning-Xu / Han, Shan / Li, Wei	Fabrication and characterization of self-healing microcapsules containing bituminous rejuvenator by a nano-inorganic/organic hybrid method	471-482
Zhang, Y. M. / Jia, L. T. / Mei, H. / Cui, Q. / Zhang, P. G. / Sun, Z. M.	Fabrication, microstructure and properties of bricks fired from lake sediment, cinder and sewage sludge	154-160
Colombo, Mattia / Valente, Tiago / Barros, Joaquim A. O. / Aprile, Alessandra / Lourenço, Lúcio	Fibre reinforced mortar application for out-of-plane strengthening of schist walls	185-197
Antunes, Giselle R. / Masuero, Ângela B.	Flexural tensile strength in mortar coating reinforced with different types of metal mesh: A statistical comparison	559-568
Jugulkar, Lalitkumar Maikulal / Singh, Shankar / Sawant, Suresh M.	Fluid flow modeling and experimental investigation on automobile damper	760-772
Zhang, Zengqi / Zhang, Bo / Yan, Peiyu	Hydration and microstructures of concrete containing raw or densified silica fume at different curing temperatures	483-490
Wang, Chao / Zhang, Han / Castorena, Cassie / Zhang, Jinxi / Kim, Y. Richard	Identifying fatigue failure in asphalt binder time sweep tests	535-546
Allali, F. / Joussein, E. / Idrissi Kandri, N. / Rossignol, S.	The influence of calcium content on the mixture of sodium silicate with different additives: Na 2 CO 3 , NaOH and AlO(OH)	588-598
Jokūbaitis, Aidas / Marčiukaitis, Gediminas / Valivonis, Juozas	Influence of technological and environmental factors on the behaviour of the reinforcement anchorage zone of prestressed concrete sleepers	507-518
Luo, Mian / Qian, Chunxiang	Influences of bacteria-based self-healing agents on cementitious materials hydration kinetics and compressive strength	659-663
Huang, Hua / Liu, Boquan / Xi, Kailin / Wu, Tao	Interfacial tensile bond behavior of permeable polymer mortar to concrete	210-221
Amin, Ibrahim / El-Badawy, Sherif M. / Breakah, Tamer / Ibrahim, Mourad H. Z.	Laboratory evaluation of asphalt binder modified with carbon nanotubes for Egyptian climate	361-372
Yehia, Sherif / Douba, AlaEddin / Abdullahi, Omar / Farrag, Sharef	Mechanical and durability evaluation of fiber-reinforced self-compacting concrete	120-133
Smarzewski, Piotr / Barnat-Hunek, Danuta	Mechanical and durability related properties of high performance concrete made with coal cinder and waste foundry sand	9-17
Li, Hai-tao / Chen, Guo / Zhang, Qisheng / Ashraf, Mahmud / Xu, Bin / Li, Yanjun	Mechanical properties of laminated bamboo lumber column under radial eccentric compression	644-652
Arora, Aashay / Vance, Kirk / Sant, Gaurav / Neithalath, Narayanan	A methodology to extract the component size distributions in interground composite (limestone) cements	328-337
Zhan, Qiwei / Qian, Chunxiang / Yi, Haihe	Microbial-induced mineralization and cementation of fugitive dust and engineering application	437-444
Xu, Guangji / Wang, Hao	Molecular dynamics study of interfacial mechanical behavior between asphalt binder and mineral aggregate	246-254
Ballarini, Roberto / Pisano, Gabriele / Royer Carfagni, Gianni	New calibration of partial material factors for the structural design of float glass. Comparison of bounded and unbounded statistics for glass strength	69-80
Saboo, Nikhil / Das, Bhaskar Pratim / Kumar, Praveen	New phenomenological approach for modeling fatigue life of asphalt mixes	134-142
Hashemi, Ashkan / Masoudnia, Reza / Quenneville, Pierre	A numerical study of coupled timber walls with slip friction damping devices	373-385
Li, Han / Tian, Shengze / Dang, Xinzhi / Yuan, Wancheng / Wei, Kai	Performance of steel mesh reinforced elastomeric isolation bearing: Experimental study	60-68
Bendimerad, Ahmed Z. / Roziere, Emmanuel / Loukili, Ahmed	Plastic shrinkage and cracking risk of recycled aggregates concrete	733-745
Carbonell-Márquez, J. F. / Gil-Martín, L. M. / Fernández-Ruiz, M. A. / Hernández-Montes, E.	Procedure for the assessment of the residual capacity of corroded B-regions in RC structures	519-534
Siddique, Rafat / Singh, Karambir / Singh, Malkit / Corinaldesi, Valeria / Rajor, Anita	Properties of bacterial rice husk ash concrete	112-119
Latif Al-Mufti, R. / Fried, A. N.	Pulse velocity assessment of early age creep of concrete	622-628
Zhang, Jun / Faruk, Abu N. M. / Karki, Pravat / Holleran, Irina / Hu, Xiaodi / Walubita, Lubinda F.	Relating asphalt binder elastic recovery properties to HMA cracking and fracture properties	236-245
Manosalvas-Paredes, Mario / Gallego, Juan / Saiz, Leticia / Bermejo, José Ma	Rubber modified binders as an alternative to cellulose fiber – SBS polymers in Stone Matrix Asphalt	727-732
Yoo, Doo-Yeol / Banthia, Nemkumar / Yang, Jun-Mo / Yoon, Young-Soo	Size effect in normal- and high-strength amorphous metallic and steel fiber reinforced concrete beams	676-685
Kutuk-Sert, T.	Stability analyses of submicron-boron mineral prepared by mechanical milling process in concrete roads	255-264
Lee, Cheol-Ho / Kang, Thomas H.-K. / Kim, Sung-Yong / Kang, Kiyong	Strain compatibility method for the design of short rectangular concrete-filled tube columns under eccentric axial loads	143-153
Chen, Ju / Wang, Jun / Jin, Wei-liang	Study of magnetically driven concrete	53-59
Wang, Hainian / Zhang, Ran / Chen, Yu / You, Zhanping / Fang, Jun	Study on microstructure of rubberized recycled hot mix asphalt based X-ray CT technology	177-184
Rashad, Alaa M.	A synopsis about perlite as building material – A best practice guide for Civil Engineer	338-353
Bilotta, Antonio / de Silva, Donatella / Nigro, Emidio	Tests on intumescent paints for fire protection of existing steel structures	410-422
Vo, Loan T. T. / Navard, Patrick	Treatments of plant biomass for cementitious building materials – A review	161-176
Matalkah, Faris / Soroushian, Parviz / Ul Abideen, Saqib / Peyvandi, Amirpasha	Use of non-wood biomass combustion ash in development of alkali-activated concrete	491-500
Yazdanbakhsh, Ardavan / Bank, Lawrence C. / Chen, Chen	Use of recycled FRP reinforcing bar in concrete as coarse aggregate and its impact on the mechanical properties of concrete	278-284
Zaharaki, Dimitra / Galetakis, Michalis / Komnitsas, Kostas	Valorization of construction and demolition (C&D) and industrial wastes through alkali activation	686-693
Martínez-López, Miguel / Martínez-Barrera, Gonzalo / Barrera-Díaz, Carlos / Ureña-Núñez, Fernando / Reis, João Marciano Laredo dos	Waste Tetra Pak particles from beverage containers as reinforcements in polymer mortar: Effect of gamma irradiation as an interfacial coupling factor	1-8
Klein, Nayara S. / Cavalaro, Sergio / Aguado, Antonio / Segura, Ignacio / Toralles, Berenice	The wetting water in cement-based materials: Modeling and experimental validation	34-43

Informations
sur cette fiche
IssueID
22591
Publié(e) le:
15.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - septembre 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - septembre 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.