Construction and Building Materials - September 2016

Published:	September 2016

Articles in this Issue

Author(s)	Title	Page(s)
Tapsoba, Nouffou / Baaj, Hassan / Sauzéat, Cédric / Di Benedetto, Hervé / Ech, Mohsen	3D Analysis and Modelling of Thermal Stress Restrained Specimen Test (TSRST) on Asphalt Mixes with RAP and Roofing Shingles	393-402
Acharya, Prasanna K. / Patro, Sanjaya K.	Acid resistance, sulphate resistance and strength properties of concrete containing ferrochrome ash (FA) and lime	241-250
Zhu, Ji-Hua / Wei, Liangliang / Wang, Zhaohua / Liang, Cheng Ke / Fang, Yuan / Xing, Feng	Application of carbon-fiber-reinforced polymer anode in electrochemical chloride extraction of steel-reinforced concrete	275-283
Ashraf, Warda	Carbonation of cement-based materials: Challenges and opportunities	558-570
Liu, Wei / Cui, Hongzhi / Dong, Zhijun / Xing, Feng / Zhang, Haochuang / Lo, Tommy Y.	Carbonation of concrete made with dredged marine sand and its effect on chloride binding	1-9
Pirmohammad, S. / Bayat, A.	Characterizing mixed mode I/III fracture toughness of asphalt concrete using asymmetric disc bend (ADB) specimen	571-580
López, Anahí / Guzmán, Gastón Alejandro / Di Sarli, Alejandro Ramón	Color stability in mortars and concretes. Part 1: Study on architectural mortars	617-622
Shariati, M. / Ramli Sulong, N. H. / Shariati, A. / Kueh, A. B. H.	Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study	382-392
Ryan, Paraic C. / O'Connor, Alan	Comparing the durability of self-compacting concretes and conventionally vibrated concretes in chloride rich environments	504-513
Sharmila, P. / Dhinakaran, G.	Compressive strength, porosity and sorptivity of ultra fine slag based high strength concrete	48-53
Williams, Andrew / Markandeya, Ananya / Stetsko, Yuriy / Riding, Kyle / Zayed, A.	Cracking potential and temperature sensitivity of metakaolin concrete	172-180
Al-Majidi, Mohammed Haloob / Lampropoulos, Andreas / Cundy, Andrew / Meikle, Steve	Development of geopolymer mortar under ambient temperature for in situ applications	198-211
Pei, Huafu / Yang, Qing / Li, Zongjin	Early-age performance investigations of magnesium phosphate cement by using fiber Bragg grating	147-149
Lu, Cong / Lu, Zeyu / Li, Zongjin / Leung, Christopher K. Y.	Effect of graphene oxide on the mechanical behavior of strain hardening cementitious composites	457-464
Topçu, İlker Bekir / Ateşin, Özgün	Effect of high dosage lignosulphonate and naphthalene sulphonate based plasticizer usage on micro concrete properties	189-197
Shen, Dejian / Shi, Huafeng / Tang, Xiaojian / Ji, Yong / Jiang, Guoqing	Effect of internal curing with super absorbent polymers on residual stress development and stress relaxation in restrained concrete ring specimens	309-320
Zhuang, Yi-Zhou / Zheng, Deng-Deng / Ng, Zhen / Ji, Tao / Chen, Xian-Feng	Effect of lightweight aggregate type on early-age autogenous shrinkage of concrete	373-381
Różycka, Agnieszka / Pichór, Waldemar	Effect of perlite waste addition on the properties of autoclaved aerated concrete	65-71
Coo, Michael / Pheeraphan, Thanakorn	Effect of sand, fly ash and limestone powder on preplaced aggregate concrete mechanical properties and reinforced beam shear capacity	581-592
Habib, A. O. / Aiad, I. / Youssef, T. A. / Abd El-Aziz, A. M.	Effect of some chemical admixtures on the physico-chemical and rheological properties of oil well cement pastes	80-88
Wang, Yuhong	The effects of using reclaimed asphalt pavements (RAP) on the long-term performance of asphalt concrete overlays	335-348
Li, Qingbin / Guan, Junfeng / Wu, Zhimin / Dong, Wei / Zhou, Shaowu	Equivalent maturity for ambient temperature effect on fracture parameters of site-casting dam concrete	293-308
Gonzalez, Marcelo / Tighe, Susan L. / Hui, Kathy / Rahman, Sonia / de Oliveira Lima, Arthur	Evaluation of freeze/thaw and scaling response of nanoconcrete for Portland Cement Concrete (PCC) pavements	465-472
Shettima, Ali Umara / Hussin, Mohd Warid / Ahmad, Yusof / Mirza, Jahangir	Evaluation of iron ore tailings as replacement for fine aggregate in concrete	72-79
Moshtaghin, Alireza Farajzadeh / Franke, Steffen / Keller, Thomas / Vassilopoulos, Anastasios P.	Experimental characterization of longitudinal mechanical properties of clear timber: Random spatial variability and size effects	432-441
Li, Tan / Xiao, Jianzhuang / Zhu, Cimian / Zhong, Zheng	Experimental study on mechanical behaviors of concrete with large-size recycled coarse aggregate	321-328
Pouhet, R. / Cyr, M.	Formulation and performance of flash metakaolin geopolymer concretes	150-160
Pahlavan, Lotfollah / Mota, Mariana M. / Blacquière, Gerrit	Influence of asphalt on fatigue crack monitoring in steel bridge decks using guided waves	593-604
Hajek, Radek / Foglar, Marek / Fladr, Josef	Influence of barrier material and barrier shape on blast wave mitigation	54-64
Liu, Xiu / Zhou, Changjun / Feng, Decheng / Tang, Hao / Xu, Yunxi / Fan, Xiaohu	Influence of moisture in aggregates on properties of cold-mixed resin asphalt mixture	232-240
Wang, Zhenshuang / Su, Haolin / Zhao, Shanyu / Zhao, Ning	Influence of phase change material on mechanical and thermal properties of clay geopolymer mortar	329-334
Singh, Dharamveer / Girimath, Shashibhushan	Influence of RAP sources and proportions on fracture and low temperature cracking performance of polymer modified binder	10-18
Pandurangan, K. / Dayanithy, A. / Om Prakash, S.	Influence of treatment methods on the bond strength of recycled aggregate concrete	212-221
Chen, Siyu / Yang, Xu / You, Zhanping / Wang, Min	Innovation of aggregate angularity characterization using gradient approach based upon the traditional and modified Sobel operation	442-449
Fu, Qiang / Xie, You-jun / Niu, Di-tao / Long, Guang-cheng / Luo, Da-ming / Yuan, Qiang / Song, Hao	Integrated experimental measurement and computational analysis of relaxation behavior of cement and asphalt mortar	137-146
Kupwade-Patil, Kunal / Diallo, Souleymane O. / Hossain, Dewan Zayid / Islam, Md. Rashedul / Allouche, Erez N.	Investigation of activation kinetics in geopolymer paste using quasielastic neutron scattering	181-188
Pu, L. / Unluer, C.	Investigation of carbonation depth and its influence on the performance and microstructure of MgO cement and PC mixes	349-363
Zhang, Tao / Cai, Guojun / Liu, Songyu / Duan, Weihong	Laboratory observation of engineering properties and deformation mechanisms of cemented rubber-sand mixtures	514-523
Kazmi, Syed M. S. / Abbas, Safeer / Saleem, Muhammad A. / Munir, Muhammad J. / Khitab, Anwar	Manufacturing of sustainable clay bricks: Utilization of waste sugarcane bagasse and rice husk ashes	29-41
Liu, Michael Yong Jing / Alengaram, U. Johnson / Santhanam, Manu / Jumaat, Mohd Zamin / Mo, Kim Hung	Microstructural investigations of palm oil fuel ash and fly ash based binders in lightweight aggregate foamed geopolymer concrete	112-122
Khan, Sadaqat Ullah / Ayub, Tehmina	Modelling of the pre and post-cracking response of the PVA fibre reinforced concrete subjected to direct tension	540-557
Tao, Weijun / Jiang, Guoping / Xiao, Sanxia	A new Lagrangian analysis method used to study dynamic performance of concrete with multiple velocity gauges in attenuating waves	524-529
Yaqub, M. / Bailey, C. G.	Non-destructive evaluation of residual compressive strength of post-heated reinforced concrete columns	482-493
Wan, Lin / Wendner, Roman / Cusatis, Gianluca	A novel material for in situ construction on Mars: experiments and numerical simulations	222-231
Zhang, Jun / Wang, Qing / Wang, Zhenbo	Optimizing design of high strength cement matrix with supplementary cementitious materials	123-136
Boukour, S. / Benmalek, M. L.	Performance evaluation of a resinous cement mortar modified with crushed clay brick and tire rubber aggregate	473-481
Fatemi, Saeed / Imaninasab, Reza	Performance evaluation of recycled asphalt mixtures by construction and demolition waste materials	450-456
Liu, Peng / Gao, Yining / Wang, Fazhou / Zhang, Wenqin / Yang, Lu / Yang, Jin / Liu, Yunpeng	Photocatalytic activity of Portland cement loaded with 3D hierarchical Bi 2 WO 6 microspheres under visible light	42-47
Navrátilová, Eva / Rovnaníková, Pavla	Pozzolanic properties of brick powders and their effect on the properties of modified lime mortars	530-539
Shen, Yunwen / Gu, Jiyou / Tan, Haiyan / Lv, Shanshan / Zhang, Yanhua	Preparation and properties of a polyvinyl alcohol toughened urea-formaldehyde foam for thermal insulation applications	104-111
Choi, Sun-Gyu / Wang, Kejin / Chu, Jian	Properties of biocemented, fiber reinforced sand	623-629
Jayalath, Amitha / San Nicolas, Rackel / Sofi, Massoud / Shanks, Robert / Ngo, Tuan / Aye, Lu / Mendis, Priyan	Properties of cementitious mortar and concrete containing micro-encapsulated phase change materials	408-417
Ferrer, Beatriz / Bogas, J. Alexandre / Real, Sofia	Service life of structural lightweight aggregate concrete under carbonation-induced corrosion	161-171
Sistani Nezhad, Razieh / Kabir, Mohammad Z. / Banazadeh, Mehdi	Shaking table test of fibre reinforced masonry walls under out-of-plane loading	89-103
Danoglidis, Panagiotis A. / Konsta-Gdoutos, Maria S. / Gdoutos, Emmanuel E. / Shah, Surendra P.	Strength, energy absorption capability and self-sensing properties of multifunctional carbon nanotube reinforced mortars	265-274
Conde, B. / Díaz-Vilariño, L. / Lagüela, S. / Arias, P.	Structural analysis of Monforte de Lemos masonry arch bridge considering the influence of the geometry of the arches and fill material on the collapse load estimation	630-642
Mo, Kim Hung / Alengaram, U. Johnson / Jumaat, Mohd Zamin	Structural performance of reinforced geopolymer concrete members: A review	251-264
Lollini, Federica / Redaelli, Elena / Bertolini, Luca	A study on the applicability of the efficiency factor of supplementary cementitious materials to durability properties	284-292
He, Liang / Ma, Yu / Liu, Quantao / Mu, Yuanhua	Surface modification of crumb rubber and its influence on the mechanical properties of rubber-cement concrete	403-407
Zhao, Yanjing / Ni, Fujian / Zhou, Lan / Gao, Lei	Three-dimensional fracture simulation of cold in-place recycling mixture using cohesive zone model	19-28
Liu, Zhiyong / Chen, Weiwei / Zhang, Yunsheng / Lv, Henglin	A three-dimensional multi-scale method to simulate the ion transport behavior of cement-based materials	494-503
De Weerdt, Klaartje / Orsáková, Denisa / Müller, Arnaud C. A. / Larsen, Claus K. / Pedersen, Bård / Geiker, Mette R.	Towards the understanding of chloride profiles in marine exposed concrete, impact of leaching and moisture content	418-431
Avsenik, Lidija / Klinar, Dušan / Tušar, Marjan / Perše, Lidija Slemenik	Use of modified slow tire pyrolysis product as a rejuvenator for aged bitumen	605-616
Rastogi, Monisha / Vaish, Rahul	Visible light induced water detoxification through Portland cement composites reinforced with photocatalytic filler: A leap away from TiO 2	364-372

About this
data sheet
IssueID
22590
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - September 2016

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - September 2016

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.