Construction and Building Materials - September 2016

Erschienen:	September 2016

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Tapsoba, Nouffou / Baaj, Hassan / Sauzéat, Cédric / Di Benedetto, Hervé / Ech, Mohsen	3D Analysis and Modelling of Thermal Stress Restrained Specimen Test (TSRST) on Asphalt Mixes with RAP and Roofing Shingles	393-402
Acharya, Prasanna K. / Patro, Sanjaya K.	Acid resistance, sulphate resistance and strength properties of concrete containing ferrochrome ash (FA) and lime	241-250
Zhu, Ji-Hua / Wei, Liangliang / Wang, Zhaohua / Liang, Cheng Ke / Fang, Yuan / Xing, Feng	Application of carbon-fiber-reinforced polymer anode in electrochemical chloride extraction of steel-reinforced concrete	275-283
Ashraf, Warda	Carbonation of cement-based materials: Challenges and opportunities	558-570
Liu, Wei / Cui, Hongzhi / Dong, Zhijun / Xing, Feng / Zhang, Haochuang / Lo, Tommy Y.	Carbonation of concrete made with dredged marine sand and its effect on chloride binding	1-9
Pirmohammad, S. / Bayat, A.	Characterizing mixed mode I/III fracture toughness of asphalt concrete using asymmetric disc bend (ADB) specimen	571-580
López, Anahí / Guzmán, Gastón Alejandro / Di Sarli, Alejandro Ramón	Color stability in mortars and concretes. Part 1: Study on architectural mortars	617-622
Shariati, M. / Ramli Sulong, N. H. / Shariati, A. / Kueh, A. B. H.	Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study	382-392
Ryan, Paraic C. / O'Connor, Alan	Comparing the durability of self-compacting concretes and conventionally vibrated concretes in chloride rich environments	504-513
Sharmila, P. / Dhinakaran, G.	Compressive strength, porosity and sorptivity of ultra fine slag based high strength concrete	48-53
Williams, Andrew / Markandeya, Ananya / Stetsko, Yuriy / Riding, Kyle / Zayed, A.	Cracking potential and temperature sensitivity of metakaolin concrete	172-180
Al-Majidi, Mohammed Haloob / Lampropoulos, Andreas / Cundy, Andrew / Meikle, Steve	Development of geopolymer mortar under ambient temperature for in situ applications	198-211
Pei, Huafu / Yang, Qing / Li, Zongjin	Early-age performance investigations of magnesium phosphate cement by using fiber Bragg grating	147-149
Lu, Cong / Lu, Zeyu / Li, Zongjin / Leung, Christopher K. Y.	Effect of graphene oxide on the mechanical behavior of strain hardening cementitious composites	457-464
Topçu, İlker Bekir / Ateşin, Özgün	Effect of high dosage lignosulphonate and naphthalene sulphonate based plasticizer usage on micro concrete properties	189-197
Shen, Dejian / Shi, Huafeng / Tang, Xiaojian / Ji, Yong / Jiang, Guoqing	Effect of internal curing with super absorbent polymers on residual stress development and stress relaxation in restrained concrete ring specimens	309-320
Zhuang, Yi-Zhou / Zheng, Deng-Deng / Ng, Zhen / Ji, Tao / Chen, Xian-Feng	Effect of lightweight aggregate type on early-age autogenous shrinkage of concrete	373-381
Różycka, Agnieszka / Pichór, Waldemar	Effect of perlite waste addition on the properties of autoclaved aerated concrete	65-71
Coo, Michael / Pheeraphan, Thanakorn	Effect of sand, fly ash and limestone powder on preplaced aggregate concrete mechanical properties and reinforced beam shear capacity	581-592
Habib, A. O. / Aiad, I. / Youssef, T. A. / Abd El-Aziz, A. M.	Effect of some chemical admixtures on the physico-chemical and rheological properties of oil well cement pastes	80-88
Wang, Yuhong	The effects of using reclaimed asphalt pavements (RAP) on the long-term performance of asphalt concrete overlays	335-348
Li, Qingbin / Guan, Junfeng / Wu, Zhimin / Dong, Wei / Zhou, Shaowu	Equivalent maturity for ambient temperature effect on fracture parameters of site-casting dam concrete	293-308
Gonzalez, Marcelo / Tighe, Susan L. / Hui, Kathy / Rahman, Sonia / de Oliveira Lima, Arthur	Evaluation of freeze/thaw and scaling response of nanoconcrete for Portland Cement Concrete (PCC) pavements	465-472
Shettima, Ali Umara / Hussin, Mohd Warid / Ahmad, Yusof / Mirza, Jahangir	Evaluation of iron ore tailings as replacement for fine aggregate in concrete	72-79
Moshtaghin, Alireza Farajzadeh / Franke, Steffen / Keller, Thomas / Vassilopoulos, Anastasios P.	Experimental characterization of longitudinal mechanical properties of clear timber: Random spatial variability and size effects	432-441
Li, Tan / Xiao, Jianzhuang / Zhu, Cimian / Zhong, Zheng	Experimental study on mechanical behaviors of concrete with large-size recycled coarse aggregate	321-328
Pouhet, R. / Cyr, M.	Formulation and performance of flash metakaolin geopolymer concretes	150-160
Pahlavan, Lotfollah / Mota, Mariana M. / Blacquière, Gerrit	Influence of asphalt on fatigue crack monitoring in steel bridge decks using guided waves	593-604
Hajek, Radek / Foglar, Marek / Fladr, Josef	Influence of barrier material and barrier shape on blast wave mitigation	54-64
Liu, Xiu / Zhou, Changjun / Feng, Decheng / Tang, Hao / Xu, Yunxi / Fan, Xiaohu	Influence of moisture in aggregates on properties of cold-mixed resin asphalt mixture	232-240
Wang, Zhenshuang / Su, Haolin / Zhao, Shanyu / Zhao, Ning	Influence of phase change material on mechanical and thermal properties of clay geopolymer mortar	329-334
Singh, Dharamveer / Girimath, Shashibhushan	Influence of RAP sources and proportions on fracture and low temperature cracking performance of polymer modified binder	10-18
Pandurangan, K. / Dayanithy, A. / Om Prakash, S.	Influence of treatment methods on the bond strength of recycled aggregate concrete	212-221
Chen, Siyu / Yang, Xu / You, Zhanping / Wang, Min	Innovation of aggregate angularity characterization using gradient approach based upon the traditional and modified Sobel operation	442-449
Fu, Qiang / Xie, You-jun / Niu, Di-tao / Long, Guang-cheng / Luo, Da-ming / Yuan, Qiang / Song, Hao	Integrated experimental measurement and computational analysis of relaxation behavior of cement and asphalt mortar	137-146
Kupwade-Patil, Kunal / Diallo, Souleymane O. / Hossain, Dewan Zayid / Islam, Md. Rashedul / Allouche, Erez N.	Investigation of activation kinetics in geopolymer paste using quasielastic neutron scattering	181-188
Pu, L. / Unluer, C.	Investigation of carbonation depth and its influence on the performance and microstructure of MgO cement and PC mixes	349-363
Zhang, Tao / Cai, Guojun / Liu, Songyu / Duan, Weihong	Laboratory observation of engineering properties and deformation mechanisms of cemented rubber-sand mixtures	514-523
Kazmi, Syed M. S. / Abbas, Safeer / Saleem, Muhammad A. / Munir, Muhammad J. / Khitab, Anwar	Manufacturing of sustainable clay bricks: Utilization of waste sugarcane bagasse and rice husk ashes	29-41
Liu, Michael Yong Jing / Alengaram, U. Johnson / Santhanam, Manu / Jumaat, Mohd Zamin / Mo, Kim Hung	Microstructural investigations of palm oil fuel ash and fly ash based binders in lightweight aggregate foamed geopolymer concrete	112-122
Khan, Sadaqat Ullah / Ayub, Tehmina	Modelling of the pre and post-cracking response of the PVA fibre reinforced concrete subjected to direct tension	540-557
Tao, Weijun / Jiang, Guoping / Xiao, Sanxia	A new Lagrangian analysis method used to study dynamic performance of concrete with multiple velocity gauges in attenuating waves	524-529
Yaqub, M. / Bailey, C. G.	Non-destructive evaluation of residual compressive strength of post-heated reinforced concrete columns	482-493
Wan, Lin / Wendner, Roman / Cusatis, Gianluca	A novel material for in situ construction on Mars: experiments and numerical simulations	222-231
Zhang, Jun / Wang, Qing / Wang, Zhenbo	Optimizing design of high strength cement matrix with supplementary cementitious materials	123-136
Boukour, S. / Benmalek, M. L.	Performance evaluation of a resinous cement mortar modified with crushed clay brick and tire rubber aggregate	473-481
Fatemi, Saeed / Imaninasab, Reza	Performance evaluation of recycled asphalt mixtures by construction and demolition waste materials	450-456
Liu, Peng / Gao, Yining / Wang, Fazhou / Zhang, Wenqin / Yang, Lu / Yang, Jin / Liu, Yunpeng	Photocatalytic activity of Portland cement loaded with 3D hierarchical Bi 2 WO 6 microspheres under visible light	42-47
Navrátilová, Eva / Rovnaníková, Pavla	Pozzolanic properties of brick powders and their effect on the properties of modified lime mortars	530-539
Shen, Yunwen / Gu, Jiyou / Tan, Haiyan / Lv, Shanshan / Zhang, Yanhua	Preparation and properties of a polyvinyl alcohol toughened urea-formaldehyde foam for thermal insulation applications	104-111
Choi, Sun-Gyu / Wang, Kejin / Chu, Jian	Properties of biocemented, fiber reinforced sand	623-629
Jayalath, Amitha / San Nicolas, Rackel / Sofi, Massoud / Shanks, Robert / Ngo, Tuan / Aye, Lu / Mendis, Priyan	Properties of cementitious mortar and concrete containing micro-encapsulated phase change materials	408-417
Ferrer, Beatriz / Bogas, J. Alexandre / Real, Sofia	Service life of structural lightweight aggregate concrete under carbonation-induced corrosion	161-171
Sistani Nezhad, Razieh / Kabir, Mohammad Z. / Banazadeh, Mehdi	Shaking table test of fibre reinforced masonry walls under out-of-plane loading	89-103
Danoglidis, Panagiotis A. / Konsta-Gdoutos, Maria S. / Gdoutos, Emmanuel E. / Shah, Surendra P.	Strength, energy absorption capability and self-sensing properties of multifunctional carbon nanotube reinforced mortars	265-274
Conde, B. / Díaz-Vilariño, L. / Lagüela, S. / Arias, P.	Structural analysis of Monforte de Lemos masonry arch bridge considering the influence of the geometry of the arches and fill material on the collapse load estimation	630-642
Mo, Kim Hung / Alengaram, U. Johnson / Jumaat, Mohd Zamin	Structural performance of reinforced geopolymer concrete members: A review	251-264
Lollini, Federica / Redaelli, Elena / Bertolini, Luca	A study on the applicability of the efficiency factor of supplementary cementitious materials to durability properties	284-292
He, Liang / Ma, Yu / Liu, Quantao / Mu, Yuanhua	Surface modification of crumb rubber and its influence on the mechanical properties of rubber-cement concrete	403-407
Zhao, Yanjing / Ni, Fujian / Zhou, Lan / Gao, Lei	Three-dimensional fracture simulation of cold in-place recycling mixture using cohesive zone model	19-28
Liu, Zhiyong / Chen, Weiwei / Zhang, Yunsheng / Lv, Henglin	A three-dimensional multi-scale method to simulate the ion transport behavior of cement-based materials	494-503
De Weerdt, Klaartje / Orsáková, Denisa / Müller, Arnaud C. A. / Larsen, Claus K. / Pedersen, Bård / Geiker, Mette R.	Towards the understanding of chloride profiles in marine exposed concrete, impact of leaching and moisture content	418-431
Avsenik, Lidija / Klinar, Dušan / Tušar, Marjan / Perše, Lidija Slemenik	Use of modified slow tire pyrolysis product as a rejuvenator for aged bitumen	605-616
Rastogi, Monisha / Vaish, Rahul	Visible light induced water detoxification through Portland cement composites reinforced with photocatalytic filler: A leap away from TiO 2	364-372

Über diese
Datenseite
IssueID
22590
Veröffentlicht am:
15.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - September 2016

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - September 2016

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.