Construction and Building Materials - December 2015

Published:	December 2015

Articles in this Issue

Author(s)	Title	Page(s)
Skar, Asmus / Poulsen, Peter Noe	3-D cohesive finite element model for application in structural analysis of heavy duty composite pavements	417-431
Martins, Carlos / Santos, Pedro / Almeida, Pedro / Godinho, Luís / Dias, Alfredo	Acoustic performance of timber and timber-concrete floors	684-691
Sol-Sánchez, M. / Pirozzolo, L. / Moreno-Navarro, F. / Rubio-Gámez, M. C.	Advanced characterisation of bituminous sub-ballast for its application in railway tracks: The influence of temperature	338-346
Onutai, Sujitra / Jiemsirilers, Sirithan / Thavorniti, Parjaree / Kobayashi, Takaomi	Aluminium hydroxide waste based geopolymer composed of fly ash for sustainable cement materials	298-308
Pérez-Jiménez, Félix E. / Botella, Ramón / Miró, Rodrigo / Martìnez, Adriana H.	Analysis of the thixotropic behavior and the deterioration process of bitumen in fatigue tests	277-286
Chen, Jianhang / Saydam, Serkan / Hagan, Paul C.	An analytical model of the load transfer behavior of fully grouted cable bolts	1006-1015
Ayensa, A. / Beltrán, B. / Ibarz, E. / Gracia, L.	Application of a new methodology based on Eurocodes and finite element simulation to the assessment of a romanesque church	287-297
Riggio, Mariapaola / Sandak, Jakub / Franke, Steffen	Application of imaging techniques for detection of defects, damage and decay in timber structures on-site	1241-1252
Kurumisawa, Kiyofumi	Application of thermoporometry for evaluation of properties of hardened cement paste	926-931
Settari, Chafika / Debieb, Farid / Kadri, El. Hadj / Boukendakdji, Othmane	Assessing the effects of recycled asphalt pavement materials on the performance of roller compacted concrete	617-621
Dietsch, Philipp / Tannert, Thomas	Assessing the integrity of glued-laminated timber elements	1259-1270
Arangjelovski, Toni / Gramatikov, Kiril / Docevska, Marija	Assessment of damaged timber structures using proof load test – Experience from case studies	1271-1277
Olusola, Kolapo Olubunmi / Babafemi, Adewumi John	Assessment of kernelrazzo exposed to aggressive environments	174-183
Machado, José S. / Riggio, Mariapaola / d'Ayala, Dina	Assessment of structural timber members by non- and semi-destructive methods	1155-1156
Ilharco, Tiago / Lechner, Thomas / Nowak, Tomasz	Assessment of timber floors by means of non-destructive testing methods	1206-1214
Awani, Oluwafunmilayo / El Refai, Ahmed / El-Maaddawy, Tamer	Bond characteristics of carbon fabric-reinforced cementitious matrix in double shear tests	39-49
Tennakoon, Chandani / Sagoe-Crentsil, Kwesi / San Nicolas, Rackel / Sanjayan, Jay G.	Characteristics of Australian brown coal fly ash blended geopolymers	396-409
Jumaat, Mohd Zamin / Alengaram, U. Johnson / Ahmmad, Rasel / Bahri, Syamsul / Islam, A. B. M. Saiful	Characteristics of palm oil clinker as replacement for oil palm shell in lightweight concrete subjected to elevated temperature	942-951
Voit, K. / Zimmermann, T.	Characteristics of selected concrete with tunnel excavation material	217-226
Jimma, Betiglu Eshete / Rangaraju, Prasada Rao	Chemical admixtures dose optimization in pervious concrete paste selection – A statistical approach	1047-1058
Yao, Hui / Dai, Qingli / You, Zhanping	Chemo-physical analysis and molecular dynamics (MD) simulation of moisture susceptibility of nano hydrated lime modified asphalt mixtures	536-547
Li, Qiu / Geng, Haining / Huang, Yun / Shui, Zhonghe	Chloride resistance of concrete with metakaolin addition and seawater mixing: A comparative study	184-192
Dilli, Murat Emre / Atahan, Hakan Nuri / Sengul, Cengiz	A comparison of strength and elastic properties between conventional and lightweight structural concretes designed with expanded clay aggregates	260-267
Pachón, Pablo / Compán, Víctor / Rodríguez-Mayorga, Esperanza / Sáez, Andrés	Control of structural intervention in the area of the Roman Theatre of Cadiz (Spain) by using non-destructive techniques	572-583
Benaicha, Mouhcine / Jalbaud, Olivier / Alaoui, Adil Hafidi / Burtschell, Yves	Correlation between the mechanical behavior and the ultrasonic velocity of fiber-reinforced concrete	702-709
Fernandez, Ignasi / Bairán, Jesús Miguel / Marí, Antonio R.	Corrosion effects on the mechanical properties of reinforcing steel bars. Fatigue and σ–ε behavior	772-783
Hwang, Jun Pil / Jung, Min Sun / Kim, Moonil / Ann, Ki Yong	Corrosion risk of steel fibre in concrete	239-245
Ghafari, Ehsan / Costa, Hugo / Júlio, Eduardo	Critical review on eco-efficient ultra high performance concrete enhanced with nano-materials	201-208
Fathi, Hamoon / Dabbagh, Hooshang	Damage mechanism of SCC under cyclic loading with different speed	252-259
Lu, Chien-Hsing / Chen, Jyh-Cherng / Chuang, Kui-Hao / Wey, Ming-Yen	The different properties of lightweight aggregates with the fly ashes of fluidized-bed and mechanical incinerators	380-388
Hwang, Chao-Lung / Huynh, Trong-Phuoc	Effect of alkali-activator and rice husk ash content on strength development of fly ash and residual rice husk ash-based geopolymers	1-9
Shaheen, Fouzia / Pradhan, Bulu	Effect of chloride and conjoint chloride–sulfate ions on corrosion of reinforcing steel in electrolytic concrete powder solution (ECPS)	99-112
Xue, Bin / Pei, Jianzhong / Sheng, Yanping / Li, Rui	Effect of curing compounds on the properties and microstructure of cement concretes	410-416
Ferreira, Saulo Rocha / de Andrade Silva, Flávio / Lima, Paulo Roberto Lopes / Filho, Romildo Dias Toledo	Effect of fiber treatments on the sisal fiber properties and fiber–matrix bond in cement based systems	730-740
Fang, Han / Wong, M. B. / Bai, Yu / Luo, Rudeng	Effect of heating/cooling rates on the material properties of NiTi wires for civil structural applications	447-455
Zhao, Jihui / Wang, Dongmin / Liao, Shucong	Effect of mechanical grinding on physical and chemical characteristics of circulating fluidized bed fly ash from coal gangue power plant	851-860
Zhu, Jianping / Feng, Chunhua / Yin, Haibin / Zhang, Zhanying / Shah, Surendra P.	Effects of colloidal nanoBoehmite and nanoSiO2 on fly ash cement hydration	246-251
Kastiukas, Gediminas / Zhou, Xiangming / Castro-Gomes, João / Huang, Shifeng / Saafi, Mohamed	Effects of lactic and citric acid on early-age engineering properties of Portland/calcium aluminate blended cements	389-395
Deb, Partha Sarathi / Sarker, Prabir Kumar / Barbhuiya, Salim	Effects of nano-silica on the strength development of geopolymer cured at room temperature	675-683
Pan, Yunfeng / Xian, Guijun / Silva, Manuel A. G.	Effects of water immersion on the bond behavior between CFRP plates and concrete substrate	326-337
Shao, Hongyu / Zhang, Jinrui / Fan, Tianyuan / Li, Zongjin	Electrical method to evaluate elastic modulus of early age concrete	661-666
Islam, Azizul / Alengaram, U. Johnson / Jumaat, Mohd Zamin / Bashar, Iftekhair Ibnul / Kabir, S. M. Alamgir	Engineering properties and carbon footprint of ground granulated blast-furnace slag-palm oil fuel ash-based structural geopolymer concrete	503-521
Raghavendra, T. / Udayashankar, B. C.	Engineering properties of controlled low strength materials using flyash and waste gypsum wall boards	548-557
Santos, Paulo / Martins, Cláudio / Júlio, Eduardo	Enhancement of the thermal performance of perforated clay brick walls through the addition of industrial nano-crystalline aluminium sludge	227-238
Sandak, Anna / Sandak, Jakub / Riggio, Mariapaola	Estimation of physical and mechanical properties of timber members in service by means of infrared spectroscopy	1197-1205
Azzam, Mohammed O. J. / Al-Ghazawi, Ziad	Evaluation of incorporating oil shale filler aggregate into hot mix asphalt using Superpave mix design	359-379
Mazzoli, Alida / Monosi, Saveria / Plescia, Eleonora Stella	Evaluation of the early-age-shrinkage of Fiber Reinforced Concrete (FRC) using image analysis methods	596-601
Chen, Guo / Li, Hai-tao / Zhou, Tao / Li, Cheng-long / Song, Yu-qi / Xu, Rui	Experimental evaluation on mechanical performance of OSB webbed parallel strand bamboo I-joist with holes in the web	91-98
Zheng, Wei / Lu, Weidong / Liu, Weiqing / Wang, Lu / Ling, Zhibin	Experimental investigation of laterally loaded double-shear-nail connections used in midply wood shear walls	761-771
Neagoe, Catalin A. / Gil, Lluís / Pérez, Marco A.	Experimental study of GFRP-concrete hybrid beams with low degree of shear connection	141-151
Li, Rui / Wang, Pengzhi / Xue, Bin / Pei, Jianzhong	Experimental study on aging properties and modification mechanism of Trinidad lake asphalt modified bitumen	878-883
Liu, Kai / Wang, Zhi / Jin, Can / Wang, Fang / Lu, Xueyuan	An experimental study on thermal conductivity of iron ore sand cement mortar	932-941
Armandei, Mojtaba / Darwish, Ibrahim Fathi / Ghavami, Khosrow	Experimental study on variation of mechanical properties of a cantilever beam of bamboo	784-790
Song, Weimin / Shu, Xiang / Huang, Baoshan / Woods, Mark	Factors affecting shear strength between open-graded friction course and underlying layer	527-535
Maluk, Cristián / Terrasi, Giovanni Pietro / Bisby, Luke / Stutz, Alex / Hugi, Erich	Fire resistance tests on thin CFRP prestressed concrete slabs	558-571
Pacheco, J. / de Brito, J. / Ferreira, J. / Soares, D.	Flexural load tests of full-scale recycled aggregates concrete structures	65-71
Yao, Hui / Dai, Qingli / You, Zhanping	Fourier Transform Infrared Spectroscopy characterization of aging-related properties of original and nano-modified asphalt binders	1078-1087
Ge, Zhesheng / Wang, Hao / Zhang, Qingshan / Xiong, Chunlong	Glass fiber reinforced asphalt membrane for interlayer bonding between asphalt overlay and concrete pavement	918-925
Faleschini, Flora / Alejandro Fernández-Ruíz, M. / Zanini, Mariano Angelo / Brunelli, Katya / Pellegrino, Carlo / Hernández-Montes, Enrique	High performance concrete with electric arc furnace slag as aggregate: Mechanical and durability properties	113-121
Cuesta, A. / Santacruz, I. / Sanfélix, S. G. / Fauth, F. / Aranda, M. A. G. / De la Torre, A. G.	Hydration of C4AF in the presence of other phases: A synchrotron X-ray powder diffraction study	818-827
Jo, Byung-Wan / Chakraborty, Sumit / Lee, Yun Sung	Hydration study of the polymer modified jute fibre reinforced cement paste using analytical techniques	166-173
Fujii, Alessandra Lie / Torres, Danilo dos Reis / Romano, Roberto Cesar de Oliveira / Cincotto, Maria Alba / Pileggi, Rafael Giuliano	Impact of superplasticizer on the hardening of slag Portland cement blended with red mud	432-439
Saikia, Pallav / Dutta, Dipanka / Kalita, Dipul / Bora, Jayanta Jyoti / Goswami, Tridip	Improvement of mechano-chemical properties of bamboo by bio-chemical treatment	1031-1036
Feio, Artur / Machado, José S.	In-situ assessment of timber structural members: Combining information from visual strength grading and NDT/SDT methods – A review	1157-1165
Đokić, Olivera / Matović, Vesna / Erić, Suzana / Šarić, Kristina	Influence of engineering properties on Polished Stone Value (PSV): A case study on basic igneous rocks from Serbia	1088-1096
Liu, Jintao / Li, Qinghua / Xu, Shilang	Influence of nanoparticles on fluidity and mechanical properties of cement mortar	892-901
D'Antino, Tommaso / Sneed, Lesley H. / Carloni, Christian / Pellegrino, Carlo	Influence of the substrate characteristics on the bond behavior of PBO FRCM-concrete joints	838-850
Gesoǧlu, Mehmet / Güneyisi, Erhan / Hansu, Osman / İpek, Süleyman / Asaad, Diler Sabah	Influence of waste rubber utilization on the fracture and steel–concrete bond strength properties of concrete	1113-1121
Sheen, Yeong-Nain / Le, Duc-Hien / Sun, Te-Ho	Innovative usages of stainless steel slags in developing self-compacting concrete	268-276
Zhang, Hongru / Zhao, Yuxi	Integrated interface parameters of recycled aggregate concrete	861-877
García, Álvaro / Jelfs, Jonathan / Austin, Christopher John	Internal asphalt mixture rejuvenation using capsules	309-316
Hot, Julie / Cyr, Martin / Augeard, Eric / Eekhout, Mikael	An investigation of CaSi silica fume characteristics and its possible utilization in cement-based and alkali-activated materials	456-465
Mohd Hasan, Mohd Rosli / You, Zhanping / Porter, David / Goh, Shu Wei	Laboratory moisture susceptibility evaluation of WMA under possible field conditions	57-64
Ma, Tao / Wang, Hao / Huang, Xiaoming / Wang, Zilong / Xiao, Feipeng	Laboratory performance characteristics of high modulus asphalt mixture with high-content RAP	975-982
Pritzl, Matthew D. / Tabatabai, Habib / Ghorbanpoor, Al	Long-term chloride profiles in bridge decks treated with penetrating sealer or corrosion inhibitors	1037-1046
Hughes, D. C. / Illingworth, J. M.	Low energy pre-blended mortars: Part 1 – Control of the sand drying process using a lime drying technique	466-473
Hughes, D. C. / Illingworth, J. M. / Starinieri, V.	Low energy pre-blended mortars: Part 2 – Production and characterisation of mortars using a novel lime drying technique	710-720
Li, Xian / Liang, Yan-Shuo / Zhao, Ze-Hua / Lv, Heng-Lin	Low-cycle fatigue behavior of corroded and CFRP-wrapped reinforced concrete columns	902-917
Zhang, Wuman / Chen, Shuhang / Zhang, Ning / Zhou, Yao	Low-velocity flexural impact response of steel fiber reinforced concrete subjected to freeze–thaw cycles in NaCl solution	522-526
Mohammadkazemi, Faranak / Doosthoseini, Kazem / Ganjian, Eshmaiel / Azin, Mehrdad	Manufacturing of bacterial nano-cellulose reinforced fiber−cement composites	958-964
Valdés-Vidal, G. / Calabi-Floody, A. / Miró-Recasens, R. / Norambuena-Contreras, J.	Mechanical behavior of asphalt mixtures with different aggregate type	474-481
Chousidis, N. / Rakanta, E. / Ioannou, I. / Batis, G.	Mechanical properties and durability performance of reinforced concrete containing fly ash	810-817
Mobini, Mohammad Hossein / Khaloo, Alireza / Hosseini, Payam / Esrafili, Amin	Mechanical properties of fiber-reinforced high-performance concrete incorporating pyrogenic nanosilica with different surface areas	130-140
Wang, Zhiqiang / Gong, Meng / Chui, Ying-Hei	Mechanical properties of laminated strand lumber and hybrid cross-laminated timber	622-627
Chen, Jianwen / Chen, Wujun / Zhao, Bing / Yao, Bo	Mechanical responses and damage morphology of laminated fabrics with a central slit under uniaxial tension: A comparison between analytical and experimental results	488-502
Faggiano, Beatrice / Marzo, Anna	A method for the determination of the timber density through the statistical assessment of ND transverse measurements aimed at in situ mechanical identification of existing timber structures	1235-1240
Ramezanianpour, Ali Akbar / Mousavi, Rahimeh / Kalhori, Moosa / Sobhani, Jafar / Najimi, Meysam	Micro and macro level properties of natural zeolite contained concretes	347-358
Pei, Jianzhong / Fan, Zepeng / Wang, Pengzhi / Zhang, Jiupeng / Xue, Bin / Li, Rui	Micromechanics prediction of effective modulus for asphalt mastic considering inter-particle interaction	209-216
Gao, Lu / Smit, Andre de Fortier / Prozzi, Jorge A. / Buddhavarapu, Prasad / Murphy, Mike / Song, Lingguang	Milled pavement texturing to optimize skid improvements	602-610
Kamel, Abdullah M. A. / Marie, Hassan A. H. / Mahmoud, Hala A. / Ali, Mona F.	Mineralogical characterization of Islamic stucco: Minaret of Shams El-Deen El-Wasty, Bulaq, Egypt	692-701
Ban, Hoki / Im, Soohyok / Kim, Yong-Rak	Mixed-mode fracture characterization of fine aggregate mixtures using semicircular bend fracture test and extended finite element modeling	721-729
Parniani, Sasan / Toutanji, Houssam	Monotonic and fatigue performance of RC beams strengthened with a polyurea coating system	22-29
Nazzal, Munir D. / Mogawer, Walaa / Austerman, Alexander / Abu Qtaish, Lana / Kaya, Savas	Multi-scale evaluation of the effect of rejuvenators on the performance of high RAP content mixtures	50-56
Sandak, Jakub / Sandak, Anna / Riggio, Mariapaola	Multivariate analysis of multi-sensor data for assessment of timber structures: Principles and applications	1172-1180
Ziari, H. / Behbahani, H. / Kamboozia, N. / Ameri, M.	New achievements on positive effects of nanotechnology zyco-soil on rutting resistance and stiffness modulus of glasphalt mix	752-760
Choudhary, H. K. / Anupama, A. V. / Kumar, R. / Panzi, M. E. / Matteppanavar, S. / Sherikar, Baburao N. / Sahoo, B.	Observation of phase transformations in cement during hydration	122-129
Sousa, Hélder S. / Machado, José S. / Branco, Jorge M. / Lourenço, Paulo B.	Onsite assessment of structural timber members by means of hierarchical models and probabilistic methods	1188-1196
Joshaghani, Alireza / Ramezanianpour, Ali Akbar / Ataei, Omid / Golroo, Amir	Optimizing pervious concrete pavement mixture design by using the Taguchi method	317-325
de Almeida Valença, Jónatas Miguel / de Almeida, Cláudia Andreia Fernandes Pereira / Botas, Judite Lucinda Miranda / Júlio, Eduardo Nuno Brito Santos	Patch Restoration Method: A new concept for concrete heritage	643-651
Cascione, Andrew A. / Williams, R. Christopher / Yu, Jianhua	Performance testing of asphalt pavements with recycled asphalt shingles from multiple field trials	628-642
Danso, Humphrey / Martinson, D. Brett / Ali, Muhammad / Williams, John B.	Physical, mechanical and durability properties of soil building blocks reinforced with natural fibres	797-809
Güneyisi, Erhan / Gesoǧlu, Mehmet / Azez, Oday Ali / Öz, Hatice Öznur	Physico-mechanical properties of self-compacting concrete containing treated cold-bonded fly ash lightweight aggregates and SiO2 nano-particles	1142-1153
Yin, Shi / Tuladhar, Rabin / Collister, Tony / Combe, Mark / Sivakugan, Nagaratnam / Deng, Zongcai	Post-cracking performance of recycled polypropylene fibre in concrete	1069-1077
Watase, Azusa / Birgul, Recep / Hiasa, Shuhei / Matsumoto, Masato / Mitani, Koji / Catbas, F. Necati	Practical identification of favorable time windows for infrared thermography for concrete bridge evaluation	1016-1030
Erdem, Hakan	Predicting the moment capacity of RC beams exposed to fire using ANNs	30-38
Kloiber, Michal / Drdácký, Miloš / Machado, José S. / Piazza, Maurizio / Yamaguchi, Nobuyoshi	Prediction of mechanical properties by means of semi-destructive methods: A review	1215-1234
Cao, Qi / Tao, Jinju / Ma, Zhongguo John	Prestress loss in externally FRP reinforced self prestressing concrete beams	667-674
Amran, Y. H. Mugahed / Farzadnia, Nima / Ali, A. A. Abang	Properties and applications of foamed concrete; a review	990-1005
Peng, Yanzhou / Zhang, Jun / Liu, Jiuyan / Ke, Jin / Wang, Fazhou	Properties and microstructure of reactive powder concrete having a high content of phosphorous slag powder and silica fume	482-487
Mavroulidou, M. / Morrison, T. / Unsworth, C. / Gunn, M. J.	Properties of concrete made of multicomponent mixes of low-energy demanding binders	1122-1141
Fink, Gerhard / Köhler, Jochen	Quantification of different NDT/SDT methods in respect to estimate the load-bearing capacity	1181-1187
Puertas, F. / Alonso, M. M. / Torres-Carrasco, M. / Rivilla, P. / Gasco, C. / Yagüe, L. / Suárez, J. A. / Navarro, N.	Radiological characterization of anhydrous/hydrated cements and geopolymers	1105-1112
De Lira, Rodolfo Rascon / Cortes, Douglas D. / Pasten, Cesar	Reclaimed asphalt binder aging and its implications in the management of RAP stockpiles	611-616
Akbarnezhad, A. / Huan, M. / Mesgari, S. / Castel, A.	Recycling of geopolymer concrete	152-158
Iñiguez-González, Guillermo / Arriaga, Francisco / Esteban, Miguel / Llana, Daniel F.	Reference conditions and modification factors for the standardization of nondestructive variables used in the evaluation of existing timber structures	1166-1171
Salem, Shiva / Salem, Amin	Reliability and fracture statistics of highly vitrified ceramics: Effect of technical factors on strength distribution	1097-1104
Yıldırım, Gürkan / Keskin, Ozlem Kasap / Keskin, Suleyman Bahadir / Şahmaran, Mustafa / Lachemi, Mohamed	A review of intrinsic self-healing capability of engineered cementitious composites: Recovery of transport and mechanical properties	10-21
Shi, Caijun / Wu, Zemei / Xiao, Jianfan / Wang, Dehui / Huang, Zhengyu / Fang, Zhi	A review on ultra high performance concrete: Part I. Raw materials and mixture design	741-751
Chen, Zihao / Zhang, Henglong / Zhu, Chongzheng / Zhao, Bin	Rheological examination of aging in bitumen with inorganic nanoparticles and organic expanded vermiculite	884-891
Ding, Yining / Huang, Yesheng / Zhang, Yulin / Jalali, Said / Aguiar, J. B.	Self-monitoring of freeze–thaw damage using triphasic electric conductive concrete	440-446
Henriques, D. F. / Neves, A. S.	Semi-destructive in situ tests as support to the assessment of a conservation process	1253-1258
Bal, Bekir Cihad / Bektaş, İbrahim / Mengeloglu, Fatih / Karakuş, Kadir / Ökkeş Demir, H.	Some technological properties of poplar plywood panels reinforced with glass fiber fabric	952-957
Rerkpiboon, Aukkadet / Tangchirapat, Weerachart / Jaturapitakkul, Chai	Strength, chloride resistance, and expansion of concretes containing ground bagasse ash	983-989
Abouzied, Ahmed / Masmoudi, Radhouane	Structural performance of new fully and partially concrete-filled rectangular FRP-tube beams	652-660
Wang, Hongchang / Li, Guofen	Study of factors influencing gussasphalt mixture performance	193-200
Li, Yujie / Yang, Jie / Tan, Ting	Study on adhesion between asphalt binders and aggregate minerals under ambient conditions using particle-modified atomic force microscope probes	159-165
Praticò, F. G. / Vaiana, R.	A study on the relationship between mean texture depth and mean profile depth of asphalt pavements	72-79
Ma, Hui / Qian, Shunzhi / Zhang, Zhigang / Lin, Zhan / Li, Victor C.	Tailoring Engineered Cementitious Composites with local ingredients	584-595
Choi, Yong Soo / Kim, Dohyeong / Lee, Sung Chul	Ultimate shear behavior of web panels of HSB800 plate girders	828-837
Sharifi, Naser P. / Freeman, Gregory E. / Sakulich, Aaron R.	Using COMSOL modeling to investigate the efficiency of PCMs at modifying temperature changes in cementitious materials – Case study	965-974
Gu, Fan / Luo, Xue / Zhang, Yuqing / Lytton, Robert L.	Using overlay test to evaluate fracture properties of field-aged asphalt concrete	1059-1068
Sun, Dan / Wang, Lijiu	Utilization of paraffin/expanded perlite materials to improve mechanical and thermal properties of cement mortar	791-796
Muhammad, Nasiru Zakari / Keyvanfar, Ali / Abd. Majid, Muhd Zaimi / Shafaghat, Arezou / Mirza, Jahangir	Waterproof performance of concrete: A critical review on implemented approaches	80-90

About this
data sheet
IssueID
22576
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - December 2015

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - December 2015

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.