Construction and Building Materials - Dezember 2015

Erschienen:	Dezember 2015

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Skar, Asmus / Poulsen, Peter Noe	3-D cohesive finite element model for application in structural analysis of heavy duty composite pavements	417-431
Martins, Carlos / Santos, Pedro / Almeida, Pedro / Godinho, Luís / Dias, Alfredo	Acoustic performance of timber and timber-concrete floors	684-691
Sol-Sánchez, M. / Pirozzolo, L. / Moreno-Navarro, F. / Rubio-Gámez, M. C.	Advanced characterisation of bituminous sub-ballast for its application in railway tracks: The influence of temperature	338-346
Onutai, Sujitra / Jiemsirilers, Sirithan / Thavorniti, Parjaree / Kobayashi, Takaomi	Aluminium hydroxide waste based geopolymer composed of fly ash for sustainable cement materials	298-308
Pérez-Jiménez, Félix E. / Botella, Ramón / Miró, Rodrigo / Martìnez, Adriana H.	Analysis of the thixotropic behavior and the deterioration process of bitumen in fatigue tests	277-286
Chen, Jianhang / Saydam, Serkan / Hagan, Paul C.	An analytical model of the load transfer behavior of fully grouted cable bolts	1006-1015
Ayensa, A. / Beltrán, B. / Ibarz, E. / Gracia, L.	Application of a new methodology based on Eurocodes and finite element simulation to the assessment of a romanesque church	287-297
Riggio, Mariapaola / Sandak, Jakub / Franke, Steffen	Application of imaging techniques for detection of defects, damage and decay in timber structures on-site	1241-1252
Kurumisawa, Kiyofumi	Application of thermoporometry for evaluation of properties of hardened cement paste	926-931
Settari, Chafika / Debieb, Farid / Kadri, El. Hadj / Boukendakdji, Othmane	Assessing the effects of recycled asphalt pavement materials on the performance of roller compacted concrete	617-621
Dietsch, Philipp / Tannert, Thomas	Assessing the integrity of glued-laminated timber elements	1259-1270
Arangjelovski, Toni / Gramatikov, Kiril / Docevska, Marija	Assessment of damaged timber structures using proof load test – Experience from case studies	1271-1277
Olusola, Kolapo Olubunmi / Babafemi, Adewumi John	Assessment of kernelrazzo exposed to aggressive environments	174-183
Machado, José S. / Riggio, Mariapaola / d'Ayala, Dina	Assessment of structural timber members by non- and semi-destructive methods	1155-1156
Ilharco, Tiago / Lechner, Thomas / Nowak, Tomasz	Assessment of timber floors by means of non-destructive testing methods	1206-1214
Awani, Oluwafunmilayo / El Refai, Ahmed / El-Maaddawy, Tamer	Bond characteristics of carbon fabric-reinforced cementitious matrix in double shear tests	39-49
Tennakoon, Chandani / Sagoe-Crentsil, Kwesi / San Nicolas, Rackel / Sanjayan, Jay G.	Characteristics of Australian brown coal fly ash blended geopolymers	396-409
Jumaat, Mohd Zamin / Alengaram, U. Johnson / Ahmmad, Rasel / Bahri, Syamsul / Islam, A. B. M. Saiful	Characteristics of palm oil clinker as replacement for oil palm shell in lightweight concrete subjected to elevated temperature	942-951
Voit, K. / Zimmermann, T.	Characteristics of selected concrete with tunnel excavation material	217-226
Jimma, Betiglu Eshete / Rangaraju, Prasada Rao	Chemical admixtures dose optimization in pervious concrete paste selection – A statistical approach	1047-1058
Yao, Hui / Dai, Qingli / You, Zhanping	Chemo-physical analysis and molecular dynamics (MD) simulation of moisture susceptibility of nano hydrated lime modified asphalt mixtures	536-547
Li, Qiu / Geng, Haining / Huang, Yun / Shui, Zhonghe	Chloride resistance of concrete with metakaolin addition and seawater mixing: A comparative study	184-192
Dilli, Murat Emre / Atahan, Hakan Nuri / Sengul, Cengiz	A comparison of strength and elastic properties between conventional and lightweight structural concretes designed with expanded clay aggregates	260-267
Pachón, Pablo / Compán, Víctor / Rodríguez-Mayorga, Esperanza / Sáez, Andrés	Control of structural intervention in the area of the Roman Theatre of Cadiz (Spain) by using non-destructive techniques	572-583
Benaicha, Mouhcine / Jalbaud, Olivier / Alaoui, Adil Hafidi / Burtschell, Yves	Correlation between the mechanical behavior and the ultrasonic velocity of fiber-reinforced concrete	702-709
Fernandez, Ignasi / Bairán, Jesús Miguel / Marí, Antonio R.	Corrosion effects on the mechanical properties of reinforcing steel bars. Fatigue and σ–ε behavior	772-783
Hwang, Jun Pil / Jung, Min Sun / Kim, Moonil / Ann, Ki Yong	Corrosion risk of steel fibre in concrete	239-245
Ghafari, Ehsan / Costa, Hugo / Júlio, Eduardo	Critical review on eco-efficient ultra high performance concrete enhanced with nano-materials	201-208
Fathi, Hamoon / Dabbagh, Hooshang	Damage mechanism of SCC under cyclic loading with different speed	252-259
Lu, Chien-Hsing / Chen, Jyh-Cherng / Chuang, Kui-Hao / Wey, Ming-Yen	The different properties of lightweight aggregates with the fly ashes of fluidized-bed and mechanical incinerators	380-388
Hwang, Chao-Lung / Huynh, Trong-Phuoc	Effect of alkali-activator and rice husk ash content on strength development of fly ash and residual rice husk ash-based geopolymers	1-9
Shaheen, Fouzia / Pradhan, Bulu	Effect of chloride and conjoint chloride–sulfate ions on corrosion of reinforcing steel in electrolytic concrete powder solution (ECPS)	99-112
Xue, Bin / Pei, Jianzhong / Sheng, Yanping / Li, Rui	Effect of curing compounds on the properties and microstructure of cement concretes	410-416
Ferreira, Saulo Rocha / de Andrade Silva, Flávio / Lima, Paulo Roberto Lopes / Filho, Romildo Dias Toledo	Effect of fiber treatments on the sisal fiber properties and fiber–matrix bond in cement based systems	730-740
Fang, Han / Wong, M. B. / Bai, Yu / Luo, Rudeng	Effect of heating/cooling rates on the material properties of NiTi wires for civil structural applications	447-455
Zhao, Jihui / Wang, Dongmin / Liao, Shucong	Effect of mechanical grinding on physical and chemical characteristics of circulating fluidized bed fly ash from coal gangue power plant	851-860
Zhu, Jianping / Feng, Chunhua / Yin, Haibin / Zhang, Zhanying / Shah, Surendra P.	Effects of colloidal nanoBoehmite and nanoSiO2 on fly ash cement hydration	246-251
Kastiukas, Gediminas / Zhou, Xiangming / Castro-Gomes, João / Huang, Shifeng / Saafi, Mohamed	Effects of lactic and citric acid on early-age engineering properties of Portland/calcium aluminate blended cements	389-395
Deb, Partha Sarathi / Sarker, Prabir Kumar / Barbhuiya, Salim	Effects of nano-silica on the strength development of geopolymer cured at room temperature	675-683
Pan, Yunfeng / Xian, Guijun / Silva, Manuel A. G.	Effects of water immersion on the bond behavior between CFRP plates and concrete substrate	326-337
Shao, Hongyu / Zhang, Jinrui / Fan, Tianyuan / Li, Zongjin	Electrical method to evaluate elastic modulus of early age concrete	661-666
Islam, Azizul / Alengaram, U. Johnson / Jumaat, Mohd Zamin / Bashar, Iftekhair Ibnul / Kabir, S. M. Alamgir	Engineering properties and carbon footprint of ground granulated blast-furnace slag-palm oil fuel ash-based structural geopolymer concrete	503-521
Raghavendra, T. / Udayashankar, B. C.	Engineering properties of controlled low strength materials using flyash and waste gypsum wall boards	548-557
Santos, Paulo / Martins, Cláudio / Júlio, Eduardo	Enhancement of the thermal performance of perforated clay brick walls through the addition of industrial nano-crystalline aluminium sludge	227-238
Sandak, Anna / Sandak, Jakub / Riggio, Mariapaola	Estimation of physical and mechanical properties of timber members in service by means of infrared spectroscopy	1197-1205
Azzam, Mohammed O. J. / Al-Ghazawi, Ziad	Evaluation of incorporating oil shale filler aggregate into hot mix asphalt using Superpave mix design	359-379
Mazzoli, Alida / Monosi, Saveria / Plescia, Eleonora Stella	Evaluation of the early-age-shrinkage of Fiber Reinforced Concrete (FRC) using image analysis methods	596-601
Chen, Guo / Li, Hai-tao / Zhou, Tao / Li, Cheng-long / Song, Yu-qi / Xu, Rui	Experimental evaluation on mechanical performance of OSB webbed parallel strand bamboo I-joist with holes in the web	91-98
Zheng, Wei / Lu, Weidong / Liu, Weiqing / Wang, Lu / Ling, Zhibin	Experimental investigation of laterally loaded double-shear-nail connections used in midply wood shear walls	761-771
Neagoe, Catalin A. / Gil, Lluís / Pérez, Marco A.	Experimental study of GFRP-concrete hybrid beams with low degree of shear connection	141-151
Li, Rui / Wang, Pengzhi / Xue, Bin / Pei, Jianzhong	Experimental study on aging properties and modification mechanism of Trinidad lake asphalt modified bitumen	878-883
Liu, Kai / Wang, Zhi / Jin, Can / Wang, Fang / Lu, Xueyuan	An experimental study on thermal conductivity of iron ore sand cement mortar	932-941
Armandei, Mojtaba / Darwish, Ibrahim Fathi / Ghavami, Khosrow	Experimental study on variation of mechanical properties of a cantilever beam of bamboo	784-790
Song, Weimin / Shu, Xiang / Huang, Baoshan / Woods, Mark	Factors affecting shear strength between open-graded friction course and underlying layer	527-535
Maluk, Cristián / Terrasi, Giovanni Pietro / Bisby, Luke / Stutz, Alex / Hugi, Erich	Fire resistance tests on thin CFRP prestressed concrete slabs	558-571
Pacheco, J. / de Brito, J. / Ferreira, J. / Soares, D.	Flexural load tests of full-scale recycled aggregates concrete structures	65-71
Yao, Hui / Dai, Qingli / You, Zhanping	Fourier Transform Infrared Spectroscopy characterization of aging-related properties of original and nano-modified asphalt binders	1078-1087
Ge, Zhesheng / Wang, Hao / Zhang, Qingshan / Xiong, Chunlong	Glass fiber reinforced asphalt membrane for interlayer bonding between asphalt overlay and concrete pavement	918-925
Faleschini, Flora / Alejandro Fernández-Ruíz, M. / Zanini, Mariano Angelo / Brunelli, Katya / Pellegrino, Carlo / Hernández-Montes, Enrique	High performance concrete with electric arc furnace slag as aggregate: Mechanical and durability properties	113-121
Cuesta, A. / Santacruz, I. / Sanfélix, S. G. / Fauth, F. / Aranda, M. A. G. / De la Torre, A. G.	Hydration of C4AF in the presence of other phases: A synchrotron X-ray powder diffraction study	818-827
Jo, Byung-Wan / Chakraborty, Sumit / Lee, Yun Sung	Hydration study of the polymer modified jute fibre reinforced cement paste using analytical techniques	166-173
Fujii, Alessandra Lie / Torres, Danilo dos Reis / Romano, Roberto Cesar de Oliveira / Cincotto, Maria Alba / Pileggi, Rafael Giuliano	Impact of superplasticizer on the hardening of slag Portland cement blended with red mud	432-439
Saikia, Pallav / Dutta, Dipanka / Kalita, Dipul / Bora, Jayanta Jyoti / Goswami, Tridip	Improvement of mechano-chemical properties of bamboo by bio-chemical treatment	1031-1036
Feio, Artur / Machado, José S.	In-situ assessment of timber structural members: Combining information from visual strength grading and NDT/SDT methods – A review	1157-1165
Đokić, Olivera / Matović, Vesna / Erić, Suzana / Šarić, Kristina	Influence of engineering properties on Polished Stone Value (PSV): A case study on basic igneous rocks from Serbia	1088-1096
Liu, Jintao / Li, Qinghua / Xu, Shilang	Influence of nanoparticles on fluidity and mechanical properties of cement mortar	892-901
D'Antino, Tommaso / Sneed, Lesley H. / Carloni, Christian / Pellegrino, Carlo	Influence of the substrate characteristics on the bond behavior of PBO FRCM-concrete joints	838-850
Gesoǧlu, Mehmet / Güneyisi, Erhan / Hansu, Osman / İpek, Süleyman / Asaad, Diler Sabah	Influence of waste rubber utilization on the fracture and steel–concrete bond strength properties of concrete	1113-1121
Sheen, Yeong-Nain / Le, Duc-Hien / Sun, Te-Ho	Innovative usages of stainless steel slags in developing self-compacting concrete	268-276
Zhang, Hongru / Zhao, Yuxi	Integrated interface parameters of recycled aggregate concrete	861-877
García, Álvaro / Jelfs, Jonathan / Austin, Christopher John	Internal asphalt mixture rejuvenation using capsules	309-316
Hot, Julie / Cyr, Martin / Augeard, Eric / Eekhout, Mikael	An investigation of CaSi silica fume characteristics and its possible utilization in cement-based and alkali-activated materials	456-465
Mohd Hasan, Mohd Rosli / You, Zhanping / Porter, David / Goh, Shu Wei	Laboratory moisture susceptibility evaluation of WMA under possible field conditions	57-64
Ma, Tao / Wang, Hao / Huang, Xiaoming / Wang, Zilong / Xiao, Feipeng	Laboratory performance characteristics of high modulus asphalt mixture with high-content RAP	975-982
Pritzl, Matthew D. / Tabatabai, Habib / Ghorbanpoor, Al	Long-term chloride profiles in bridge decks treated with penetrating sealer or corrosion inhibitors	1037-1046
Hughes, D. C. / Illingworth, J. M.	Low energy pre-blended mortars: Part 1 – Control of the sand drying process using a lime drying technique	466-473
Hughes, D. C. / Illingworth, J. M. / Starinieri, V.	Low energy pre-blended mortars: Part 2 – Production and characterisation of mortars using a novel lime drying technique	710-720
Li, Xian / Liang, Yan-Shuo / Zhao, Ze-Hua / Lv, Heng-Lin	Low-cycle fatigue behavior of corroded and CFRP-wrapped reinforced concrete columns	902-917
Zhang, Wuman / Chen, Shuhang / Zhang, Ning / Zhou, Yao	Low-velocity flexural impact response of steel fiber reinforced concrete subjected to freeze–thaw cycles in NaCl solution	522-526
Mohammadkazemi, Faranak / Doosthoseini, Kazem / Ganjian, Eshmaiel / Azin, Mehrdad	Manufacturing of bacterial nano-cellulose reinforced fiber−cement composites	958-964
Valdés-Vidal, G. / Calabi-Floody, A. / Miró-Recasens, R. / Norambuena-Contreras, J.	Mechanical behavior of asphalt mixtures with different aggregate type	474-481
Chousidis, N. / Rakanta, E. / Ioannou, I. / Batis, G.	Mechanical properties and durability performance of reinforced concrete containing fly ash	810-817
Mobini, Mohammad Hossein / Khaloo, Alireza / Hosseini, Payam / Esrafili, Amin	Mechanical properties of fiber-reinforced high-performance concrete incorporating pyrogenic nanosilica with different surface areas	130-140
Wang, Zhiqiang / Gong, Meng / Chui, Ying-Hei	Mechanical properties of laminated strand lumber and hybrid cross-laminated timber	622-627
Chen, Jianwen / Chen, Wujun / Zhao, Bing / Yao, Bo	Mechanical responses and damage morphology of laminated fabrics with a central slit under uniaxial tension: A comparison between analytical and experimental results	488-502
Faggiano, Beatrice / Marzo, Anna	A method for the determination of the timber density through the statistical assessment of ND transverse measurements aimed at in situ mechanical identification of existing timber structures	1235-1240
Ramezanianpour, Ali Akbar / Mousavi, Rahimeh / Kalhori, Moosa / Sobhani, Jafar / Najimi, Meysam	Micro and macro level properties of natural zeolite contained concretes	347-358
Pei, Jianzhong / Fan, Zepeng / Wang, Pengzhi / Zhang, Jiupeng / Xue, Bin / Li, Rui	Micromechanics prediction of effective modulus for asphalt mastic considering inter-particle interaction	209-216
Gao, Lu / Smit, Andre de Fortier / Prozzi, Jorge A. / Buddhavarapu, Prasad / Murphy, Mike / Song, Lingguang	Milled pavement texturing to optimize skid improvements	602-610
Kamel, Abdullah M. A. / Marie, Hassan A. H. / Mahmoud, Hala A. / Ali, Mona F.	Mineralogical characterization of Islamic stucco: Minaret of Shams El-Deen El-Wasty, Bulaq, Egypt	692-701
Ban, Hoki / Im, Soohyok / Kim, Yong-Rak	Mixed-mode fracture characterization of fine aggregate mixtures using semicircular bend fracture test and extended finite element modeling	721-729
Parniani, Sasan / Toutanji, Houssam	Monotonic and fatigue performance of RC beams strengthened with a polyurea coating system	22-29
Nazzal, Munir D. / Mogawer, Walaa / Austerman, Alexander / Abu Qtaish, Lana / Kaya, Savas	Multi-scale evaluation of the effect of rejuvenators on the performance of high RAP content mixtures	50-56
Sandak, Jakub / Sandak, Anna / Riggio, Mariapaola	Multivariate analysis of multi-sensor data for assessment of timber structures: Principles and applications	1172-1180
Ziari, H. / Behbahani, H. / Kamboozia, N. / Ameri, M.	New achievements on positive effects of nanotechnology zyco-soil on rutting resistance and stiffness modulus of glasphalt mix	752-760
Choudhary, H. K. / Anupama, A. V. / Kumar, R. / Panzi, M. E. / Matteppanavar, S. / Sherikar, Baburao N. / Sahoo, B.	Observation of phase transformations in cement during hydration	122-129
Sousa, Hélder S. / Machado, José S. / Branco, Jorge M. / Lourenço, Paulo B.	Onsite assessment of structural timber members by means of hierarchical models and probabilistic methods	1188-1196
Joshaghani, Alireza / Ramezanianpour, Ali Akbar / Ataei, Omid / Golroo, Amir	Optimizing pervious concrete pavement mixture design by using the Taguchi method	317-325
de Almeida Valença, Jónatas Miguel / de Almeida, Cláudia Andreia Fernandes Pereira / Botas, Judite Lucinda Miranda / Júlio, Eduardo Nuno Brito Santos	Patch Restoration Method: A new concept for concrete heritage	643-651
Cascione, Andrew A. / Williams, R. Christopher / Yu, Jianhua	Performance testing of asphalt pavements with recycled asphalt shingles from multiple field trials	628-642
Danso, Humphrey / Martinson, D. Brett / Ali, Muhammad / Williams, John B.	Physical, mechanical and durability properties of soil building blocks reinforced with natural fibres	797-809
Güneyisi, Erhan / Gesoǧlu, Mehmet / Azez, Oday Ali / Öz, Hatice Öznur	Physico-mechanical properties of self-compacting concrete containing treated cold-bonded fly ash lightweight aggregates and SiO2 nano-particles	1142-1153
Yin, Shi / Tuladhar, Rabin / Collister, Tony / Combe, Mark / Sivakugan, Nagaratnam / Deng, Zongcai	Post-cracking performance of recycled polypropylene fibre in concrete	1069-1077
Watase, Azusa / Birgul, Recep / Hiasa, Shuhei / Matsumoto, Masato / Mitani, Koji / Catbas, F. Necati	Practical identification of favorable time windows for infrared thermography for concrete bridge evaluation	1016-1030
Erdem, Hakan	Predicting the moment capacity of RC beams exposed to fire using ANNs	30-38
Kloiber, Michal / Drdácký, Miloš / Machado, José S. / Piazza, Maurizio / Yamaguchi, Nobuyoshi	Prediction of mechanical properties by means of semi-destructive methods: A review	1215-1234
Cao, Qi / Tao, Jinju / Ma, Zhongguo John	Prestress loss in externally FRP reinforced self prestressing concrete beams	667-674
Amran, Y. H. Mugahed / Farzadnia, Nima / Ali, A. A. Abang	Properties and applications of foamed concrete; a review	990-1005
Peng, Yanzhou / Zhang, Jun / Liu, Jiuyan / Ke, Jin / Wang, Fazhou	Properties and microstructure of reactive powder concrete having a high content of phosphorous slag powder and silica fume	482-487
Mavroulidou, M. / Morrison, T. / Unsworth, C. / Gunn, M. J.	Properties of concrete made of multicomponent mixes of low-energy demanding binders	1122-1141
Fink, Gerhard / Köhler, Jochen	Quantification of different NDT/SDT methods in respect to estimate the load-bearing capacity	1181-1187
Puertas, F. / Alonso, M. M. / Torres-Carrasco, M. / Rivilla, P. / Gasco, C. / Yagüe, L. / Suárez, J. A. / Navarro, N.	Radiological characterization of anhydrous/hydrated cements and geopolymers	1105-1112
De Lira, Rodolfo Rascon / Cortes, Douglas D. / Pasten, Cesar	Reclaimed asphalt binder aging and its implications in the management of RAP stockpiles	611-616
Akbarnezhad, A. / Huan, M. / Mesgari, S. / Castel, A.	Recycling of geopolymer concrete	152-158
Iñiguez-González, Guillermo / Arriaga, Francisco / Esteban, Miguel / Llana, Daniel F.	Reference conditions and modification factors for the standardization of nondestructive variables used in the evaluation of existing timber structures	1166-1171
Salem, Shiva / Salem, Amin	Reliability and fracture statistics of highly vitrified ceramics: Effect of technical factors on strength distribution	1097-1104
Yıldırım, Gürkan / Keskin, Ozlem Kasap / Keskin, Suleyman Bahadir / Şahmaran, Mustafa / Lachemi, Mohamed	A review of intrinsic self-healing capability of engineered cementitious composites: Recovery of transport and mechanical properties	10-21
Shi, Caijun / Wu, Zemei / Xiao, Jianfan / Wang, Dehui / Huang, Zhengyu / Fang, Zhi	A review on ultra high performance concrete: Part I. Raw materials and mixture design	741-751
Chen, Zihao / Zhang, Henglong / Zhu, Chongzheng / Zhao, Bin	Rheological examination of aging in bitumen with inorganic nanoparticles and organic expanded vermiculite	884-891
Ding, Yining / Huang, Yesheng / Zhang, Yulin / Jalali, Said / Aguiar, J. B.	Self-monitoring of freeze–thaw damage using triphasic electric conductive concrete	440-446
Henriques, D. F. / Neves, A. S.	Semi-destructive in situ tests as support to the assessment of a conservation process	1253-1258
Bal, Bekir Cihad / Bektaş, İbrahim / Mengeloglu, Fatih / Karakuş, Kadir / Ökkeş Demir, H.	Some technological properties of poplar plywood panels reinforced with glass fiber fabric	952-957
Rerkpiboon, Aukkadet / Tangchirapat, Weerachart / Jaturapitakkul, Chai	Strength, chloride resistance, and expansion of concretes containing ground bagasse ash	983-989
Abouzied, Ahmed / Masmoudi, Radhouane	Structural performance of new fully and partially concrete-filled rectangular FRP-tube beams	652-660
Wang, Hongchang / Li, Guofen	Study of factors influencing gussasphalt mixture performance	193-200
Li, Yujie / Yang, Jie / Tan, Ting	Study on adhesion between asphalt binders and aggregate minerals under ambient conditions using particle-modified atomic force microscope probes	159-165
Praticò, F. G. / Vaiana, R.	A study on the relationship between mean texture depth and mean profile depth of asphalt pavements	72-79
Ma, Hui / Qian, Shunzhi / Zhang, Zhigang / Lin, Zhan / Li, Victor C.	Tailoring Engineered Cementitious Composites with local ingredients	584-595
Choi, Yong Soo / Kim, Dohyeong / Lee, Sung Chul	Ultimate shear behavior of web panels of HSB800 plate girders	828-837
Sharifi, Naser P. / Freeman, Gregory E. / Sakulich, Aaron R.	Using COMSOL modeling to investigate the efficiency of PCMs at modifying temperature changes in cementitious materials – Case study	965-974
Gu, Fan / Luo, Xue / Zhang, Yuqing / Lytton, Robert L.	Using overlay test to evaluate fracture properties of field-aged asphalt concrete	1059-1068
Sun, Dan / Wang, Lijiu	Utilization of paraffin/expanded perlite materials to improve mechanical and thermal properties of cement mortar	791-796
Muhammad, Nasiru Zakari / Keyvanfar, Ali / Abd. Majid, Muhd Zaimi / Shafaghat, Arezou / Mirza, Jahangir	Waterproof performance of concrete: A critical review on implemented approaches	80-90

Über diese
Datenseite
IssueID
22576
Veröffentlicht am:
15.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Dezember 2015

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Dezember 2015

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.