Construction and Building Materials - October 2015

Published:	October 2015

Articles in this Issue

Author(s)	Title	Page(s)
Huang, Qian / Wang, Chong / Yang, Changhui / Zhou, Limin / Yin, Jiqiang	Accelerated sulfate attack on mortars using electrical pulse	875-881
Xing, Zhi / Beaucour, Anne-Lise / Hébert, Ronan / Noumowé, Albert / Ledésert, Béatrice	Aggregate's influence on thermophysical concrete properties at elevated temperature	18-28
Li, Ning / Molenaar, A. A. A. / Pronk, A. C. / van de Ven, M. F. C. / Wu, Shaopeng	Application of the partial healing model on laboratory fatigue results of asphalt mixture	842-849
Baingam, Lalita / Nawa, Toyoharu / Iwatsuki, Eiji / Awamura, Tomotaka	ASR formation of reactive chert in conducting model experiments at highly alkaline and temperature conditions	820-831
Saidani, Khaled / Ajam, Lasaad / Ouezdou, Mongi Ben	Barite powder as sand substitution in concrete: Effect on some mechanical properties	287-295
Wang, Dongpo / Wu, Dongsheng / He, Siming / Zhou, Jun / Ouyang, Chaojun	Behavior of post-installed large-diameter anchors in concrete foundations	124-132
Lu, Yiyan / Li, Na / Li, Shan / Liang, Hongjun	Behavior of steel fiber reinforced concrete-filled steel tube columns under axial compression	74-85
Colombo, Isabella Giorgia / Colombo, Matteo / di Prisco, Marco	Bending behaviour of Textile Reinforced Concrete sandwich beams	675-685
Sun, Daquan / Lin, Tianban / Zhu, Xingyi / Cao, Linhui	Calculation and evaluation of activation energy as a self-healing indication of asphalt mastic	431-436
Ferreira, Luís / Branco, Fernando G. / Costa, Hugo S. S. / Júlio, Eduardo / Maranha, Paulo	Characterization of alkali-activated binders using the maturity method	337-344
Abdelrahman, Marwa / ElBatanouny, Mohamed K. / Ziehl, Paul / Fasl, Jeremiah / Larosche, Carl J. / Fraczek, John	Classification of alkali–silica reaction damage using acoustic emission: A proof-of-concept study	406-413
Mo, Kim Hung / Alengaram, U. Johnson / Jumaat, Mohd Zamin / Liu, Michael Yong Jing	Contribution of acrylic fibre addition and ground granulated blast furnace slag on the properties of lightweight concrete	686-695
Carsana, Maddalena / Marra, Eleonora / Bertolini, Luca	Corrosion behaviour of metal inserts in simulated ancient masonry mortars	457-466
Bautista, A. / Alvarez, S. M. / Paredes, E. C. / Velasco, F. / Guzman, S.	Corrugated stainless steels embedded in carbonated mortars with and without chlorides: 9-Year corrosion results	186-196
Santamaría-Vicario, I. / Rodríguez, A. / Gutiérrez-González, S. / Calderón, V.	Design of masonry mortars fabricated concurrently with different steel slag aggregates	197-206
Nicolaides, Demetris / Kanellopoulos, Antonis / Petrou, Michael / Savva, Pericles / Mina, Anna	Development of a new Ultra High Performance Fibre Reinforced Cementitious Composite (UHPFRCC) for impact and blast protection of structures	667-674
Senff, L. / Modolo, R. C. E. / Ascensão, G. / Hotza, D. / Ferreira, V. M. / Labrincha, J. A.	Development of mortars containing superabsorbent polymer	575-584
Yu, Linwen / François, Raoul / Dang, Vu Hiep / L'Hostis, Valérie / Gagné, Richard	Distribution of corrosion and pitting factor of steel in corroded RC beams	384-392
Hakamy, A. / Shaikh, F. U. A. / Low, I. M.	Effect of calcined nanoclay on microstructural and mechanical properties of chemically treated hemp fabric-reinforced cement nanocomposites	882-891
Varas-Muriel, M. J. / Pérez-Monserrat, E. M. / Vazquez-Calvo, C. / Fort, R.	Effect of conservation treatments on heritage stone. Characterisation of decay processes in a case study	611-622
Kim, Hyun Hwan / Lee, Soon-Jae	Effect of crumb rubber on viscosity of rubberized asphalt binders containing wax additives	65-73
Muthu Kumar, E. / Ramamurthy, K.	Effect of fineness and dosage of aluminium powder on the properties of moist-cured aerated concrete	486-496
Subaşı, Azime / Emiroglu, Mehmet	Effect of metakaolin substitution on physical, mechanical and hydration process of White Portland cement	257-268
Farzadnia, Nima / Noorvand, Hossein / Yasin, Abdirahman Mohamed / Nora A. Aziz, Farah	The effect of nano silica on short term drying shrinkage of POFA cement mortars	636-646
Makhloufi, Z. / Chettih, M. / Bederina, M. / Kadri, E. l. Hadj / Bouhicha, M.	Effect of quaternary cementitious systems containing limestone, blast furnace slag and natural pozzolan on mechanical behavior of limestone mortars	647-657
Aliha, M. R. M. / Fazaeli, H. / Aghajani, S. / Nejad, F. Moghadas	Effect of temperature and air void on mixed mode fracture toughness of modified asphalt mixtures	545-555
Torres, Anthony / Hu, Jiong / Ramos, Amy	The effect of the cementitious paste thickness on the performance of pervious concrete	850-859
Jo, Byung Wan / Chakraborty, Sumit / Jo, Jun Ho / Lee, Yun Sung	Effectiveness of carbonated lime as a raw material in producing a CO2-stored cementitious material by the hydrothermal method	556-565
Li, Wengui / Huang, Zhengyu / Cao, Fangliang / Sun, Zhihui / Shah, Surendra P.	Effects of nano-silica and nano-limestone on flowability and mechanical properties of ultra-high-performance concrete matrix	366-374
Cheng, Hui / Lin, Kae-Long / Cui, Rong / Hwang, Chao-Lung / Chang, Yu-Min / Cheng, Ta-Wui	The effects of SiO2/Na2O molar ratio on the characteristics of alkali-activated waste catalyst–metakaolin based geopolymers	710-720
Angelin, Andressa F. / Andrade, Matheus F. F. / Bonatti, Rodrigo / Cecche Lintz, Rosa C. / Gachet-Barbosa, Luísa A. / Osório, Wislei R.	Effects of spheroid and fiber-like waste-tire rubbers on interrelation of strength-to-porosity in rubberized cement and mortars	525-536
Jacquier, Nicolas / Girhammar, Ulf Arne	Evaluation of bending tests on composite glulam–CLT beams connected with double-sided punched metal plates and inclined screws	762-773
Guercio, Maria Chiara / Mehta, Yusuf / McCarthy, Leslie Myers	Evaluation of fatigue cracking performance of asphalt mixtures under heavy static and dynamic aircraft loads	813-819
Mastali, M. / Ghasemi Naghibdehi, M. / Naghipour, M. / Rabiee, S. M.	Experimental assessment of functionally graded reinforced concrete (FGRC) slabs under drop weight and projectile impacts	296-311
Bezgin, Niyazi Ozgur	An experimental evaluation to determine the required thickness of passive fire protection layer for high strength concrete tunnel segments	279-286
Nicolaides, Demetris / Kanellopoulos, Antonis / Savva, Pericles / Petrou, Michael	Experimental field investigation of impact and blast load resistance of Ultra High Performance Fibre Reinforced Cementitious Composites (UHPFRCCs)	566-574
Yang, Hui / Song, Hengwen / Zhang, Shi	Experimental investigation of the behavior of aramid fiber reinforced polymer confined concrete subjected to high strain-rate compression	143-151
Lavasani, Mohammad / Latifi Namin, Manouchehr / Fartash, Homa	Experimental investigation on mineral and organic fibers effect on resilient modulus and dynamic creep of stone matrix asphalt and continuous graded mixtures in three temperature levels	232-242
Tahsiri, Hamidreza / Sedehi, Omid / Khaloo, Alireza / Molaei Raisi, Elias	Experimental study of RC jacketed and CFRP strengthened RC beams	476-485
Wang, Hailong / Sun, Xiaoyan / Peng, Guangyu / Luo, Yuejing / Ying, Qiming	Experimental study on bond behaviour between BFRP bar and engineered cementitious composite	448-456
Buratti, N. / Mazzotti, C.	Experimental tests on the effect of temperature on the long-term behaviour of macrosynthetic Fibre Reinforced Concretes	133-142
Zheng, X. H. / Huang, P. Y. / Chen, G. M. / Tan, X. M.	Fatigue behavior of FRP–concrete bond under hygrothermal environment	898-909
Liu, Feng / Meng, Liang-yu / Ning, Guo-Fang / Li, Li-Juan	Fatigue performance of rubber-modified recycled aggregate concrete (RRAC) for pavement	207-217
Kim, Hyeong-Ki	Feasibility study on measurement of water absorption in fine aggregate with macroporous surface via centrifugal compaction	421-430
Fossetti, Marinella / Minafò, Giovanni / Papia, Maurizio	Flexural behaviour of glulam timber beams reinforced with FRP cords	54-64
Güneyisi, Erhan / Gesoǧlu, Mehmet / Al-Goody, Asraa / İpek, Süleyman	Fresh and rheological behavior of nano-silica and fly ash blended self-compacting concrete	29-44
Snoeck, D. / De Belie, N.	From straw in bricks to modern use of microfibers in cementitious composites for improved autogenous healing – A review	774-787
Kuity, Ambika / Das, Animesh	Homogeneity of filler distribution within asphalt mix – A microscopic study	497-505
Kaminskas, Rimvydas / Česnauskas, Vytautas / Kubiliute, Raimonda	Influence of different artificial additives on Portland cement hydration and hardening	537-544
Halvaei, M. / Jamshidi, M. / Pakravan, H. R. / Latifi, M.	Interfacial bonding of fine aggregate concrete to low modulus fibers	117-123
Hossain, Zahid / Bairgi, Biswajit / Belshe, Mark	Investigation of moisture damage resistance of GTR-modified asphalt binder by static contact angle measurements	45-53
Mikami, Takamasa / Kang, Yong-Hak / Choi, Soo-Kyung	Judging indices for evaluating the exfoliation of synthetic resin floorings using the impact acoustics method	345-354
Pliya, P. / Cree, D.	Limestone derived eggshell powder as a replacement in Portland cement mortar	1-9
Praticò, Filippo G. / Vaiana, Rosolino / Iuele, Teresa	Macrotexture modeling and experimental validation for pavement surface treatments	658-666
Tian, He / Zhang, Y. X. / Ye, L. / Yang, Chunhui	Mechanical behaviours of green hybrid fibre-reinforced cementitious composites	152-163
Pinto, Deesy / Bernardo, Luís / Amaro, Ana / Lopes, Sergio	Mechanical properties of epoxy nanocomposites using titanium dioxide as reinforcement – A review	506-524
Wang, Jiabin / Niu, Ditao / Zhang, Yongli	Mechanical properties, permeability and durability of accelerated shotcrete	312-328
Shen, Lei / Ren, Qingwen / Xia, Ning / Sun, Liguo / Xia, Xiaozhou	Mesoscopic numerical simulation of effective thermal conductivity of tensile cracked concrete	467-475
Jeong, Yeonung / Park, Hyeoneun / Jun, Yubin / Jeong, Jae-Hong / Oh, Jae Eun	Microstructural verification of the strength performance of ternary blended cement systems with high volumes of fly ash and GGBFS	96-107
Barbhuiya, Salim / Chow, PengLoy / Memon, Shazim	Microstructure, hydration and nanomechanical properties of concrete containing metakaolin	696-702
Barone, G. / Mazzoleni, P. / Pappalardo, G. / Raneri, S.	Microtextural and microstructural influence on the changes of physical and mechanical proprieties related to salts crystallization weathering in natural building stones. The example of Sabucina stone (Sicily)	355-365
Gao, Dongdong / Wang, Pengbin / Li, Ming / Luo, Wenbo	Modelling of nonlinear viscoelastic creep behaviour of hot-mix asphalt	329-336
Zhang, Hongru / Zhao, Yuxi / Meng, Tao / Shah, Surendra P.	The modification effects of a nano-silica slurry on microstructure, strength, and strain development of recycled aggregate concrete applied in an enlarged structural test	721-735
Jin, Liu / Zhang, Renbo / Du, Xiuli / Li, Yue	Multi-scale analytical theory of the diffusivity of concrete subjected to mechanical stress	171-185
Greco, Fabrizio / Leonetti, Lorenzo / Luciano, Raimondo	A multiscale model for the numerical simulation of the anchor bolt pull-out test in lightweight aggregate concrete	860-874
Tabrizi, Salar / Kazem, Hamid / Rizkalla, Sami / Kobayashi, Akira	New small-diameter CFRP material for flexural strengthening of steel bridge girders	748-756
Huang, Zhenyu / Liew, J. Y. Richard	Nonlinear finite element modelling and parametric study of curved steel–concrete–steel double skin composite panels infilled with ultra-lightweight cement composite	922-938
Lotfi, Somayeh / Eggimann, Manuel / Wagner, Eckhard / Mróz, Radosław / Deja, Jan	Performance of recycled aggregate concrete based on a new concrete recycling technology	243-256
Elgabbas, Fareed / Ahmed, Ehab A. / Benmokrane, Brahim	Physical and mechanical characteristics of new basalt-FRP bars for reinforcing concrete structures	623-635
Brencich, A.	A post-installed insert for pull-out tests on concrete up to 70MPa	788-801
Afshinnia, Kaveh / Poursaee, Amir	The potential of ground clay brick to mitigate Alkali–Silica Reaction in mortar prepared with highly reactive aggregate	164-170
Keskin, Hakan / Kucuktuvek, Mustafa / Gürü, Metin	The potential of poppy (Papaver somniferum Linnaeus) husk for manufacturing wood-based particleboards	224-231
Li, Jing / Zhuang, Xinguo / Leiva, Carlos / Cornejo, Ana / Font, Oriol / Querol, Xavier / Moeno, Natalia / Arenas, Celia / Fernandez-Pereira, Constantino	Potential utilization of FGD gypsum and fly ash from a Chinese power plant for manufacturing fire-resistant panels	910-921
Uchima, Juan S. / Restrepo, Oscar J. / Tobón, Jorge I.	Pozzolanicity of the material obtained in the simultaneous calcination of biomass and kaolinitic clay	414-420
Qin, Juan / Cui, Chong / Cui, Xiaoyu / Hussain, Ahmad / Yang, Chuanmeng	Preparation and characterization of ceramsite from lime mud and coal fly ash	10-17
Lee, W. J. / Weber, B. / Leinenbach, C.	Recovery stress formation in a restrained Fe–Mn–Si-based shape memory alloy used for prestressing or mechanical joining	600-610
Sua-iam, Gritsada / Makul, Natt	Rheological and mechanical properties of cement–fly ash self-consolidating concrete incorporating high volumes of alumina-based material as fine aggregate	736-747
Laukkanen, Olli-Ville / Soenen, Hilde	Rheological characterization of wax modified bituminous binders: Effect of specimen preparation and thermal history	269-278
Rodrigues, Hugo / Arêde, António / Furtado, André / Rocha, Patrício	Seismic behavior of strengthened RC columns under biaxial loading: An experimental characterization	393-405
Rashadul Islam, Md / Hossain, Mohammad Imran / Tarefder, Rafiqul A.	A study of asphalt aging using Indirect Tensile Strength test	218-223
Selman, Efe / Ghiami, Amir / Alver, Ninel	Study of fracture evolution in FRP-strengthened reinforced concrete beam under cyclic load by acoustic emission technique: An integrated mechanical-acoustic energy approach	832-841
Arenas, Celia / Leiva, Carlos / Vilches, Luis F. / Cifuentes, Héctor / Rodriguez-Galán, Mónica	Technical specifications for highway noise barriers made of coal bottom ash-based sound absorbing concrete	585-591
Güney, Bilge Alp / Caner, Evin	Thermal and hygric expansion characteristics of mortars and bricks used in the dome structures of Turkish Baths from 14th and 15th centuries	757-761
Gerard, Pierre / Mahdad, Mohamed / Robert McCormack, Alexandre / François, Bertrand	A unified failure criterion for unstabilized rammed earth materials upon varying relative humidity conditions	437-447
Yikici, Tahsin Alper / Chen, Hung-Liang (Roger)	Use of maturity method to estimate compressive strength of mass concrete	802-812
Yuan, Guanglin / Li, Qingtao	The use of surface coating in enhancing the mechanical properties and durability of concrete exposed to elevated temperature	375-383
Muñoz, J. F. / Easton, T. / Dahmen, J.	Using alkali-activated natural aluminosilicate minerals to produce compressed masonry construction materials	86-95
Haddadi, Farshad / Ameri, Mahmoud / Mirabimoghadam, Mohammad H. / Hosseini, Hamid R. Amiri	Validation of a simplified method in viscoelastic continuum damage (VECD) model developed for flexural mode of loading	892-897
Chen, Dar Hao / Scullion, Tom	Very Thin Overlays in Texas	108-116
Bernardes, Elen E. / Carrasco, Edgar V. Mantilla / Vasconcelos, Wander L. / de Magalhães, Aldo G.	X-ray microtomography (μ-CT) to analyze the pore structure of a Portland cement composite based on the selection of different regions of interest	703-709
Gunasekara, Chamila / Law, David W. / Setunge, Sujeeva / Sanjayan, Jay G.	Zeta potential, gel formation and compressive strength of low calcium fly ash geopolymers	592-599

About this
data sheet
IssueID
22569
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - October 2015

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - October 2015

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.