Construction and Building Materials - octobre 2015

Publié:	octobre 2015

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Huang, Qian / Wang, Chong / Yang, Changhui / Zhou, Limin / Yin, Jiqiang	Accelerated sulfate attack on mortars using electrical pulse	875-881
Xing, Zhi / Beaucour, Anne-Lise / Hébert, Ronan / Noumowé, Albert / Ledésert, Béatrice	Aggregate's influence on thermophysical concrete properties at elevated temperature	18-28
Li, Ning / Molenaar, A. A. A. / Pronk, A. C. / van de Ven, M. F. C. / Wu, Shaopeng	Application of the partial healing model on laboratory fatigue results of asphalt mixture	842-849
Baingam, Lalita / Nawa, Toyoharu / Iwatsuki, Eiji / Awamura, Tomotaka	ASR formation of reactive chert in conducting model experiments at highly alkaline and temperature conditions	820-831
Saidani, Khaled / Ajam, Lasaad / Ouezdou, Mongi Ben	Barite powder as sand substitution in concrete: Effect on some mechanical properties	287-295
Wang, Dongpo / Wu, Dongsheng / He, Siming / Zhou, Jun / Ouyang, Chaojun	Behavior of post-installed large-diameter anchors in concrete foundations	124-132
Lu, Yiyan / Li, Na / Li, Shan / Liang, Hongjun	Behavior of steel fiber reinforced concrete-filled steel tube columns under axial compression	74-85
Colombo, Isabella Giorgia / Colombo, Matteo / di Prisco, Marco	Bending behaviour of Textile Reinforced Concrete sandwich beams	675-685
Sun, Daquan / Lin, Tianban / Zhu, Xingyi / Cao, Linhui	Calculation and evaluation of activation energy as a self-healing indication of asphalt mastic	431-436
Ferreira, Luís / Branco, Fernando G. / Costa, Hugo S. S. / Júlio, Eduardo / Maranha, Paulo	Characterization of alkali-activated binders using the maturity method	337-344
Abdelrahman, Marwa / ElBatanouny, Mohamed K. / Ziehl, Paul / Fasl, Jeremiah / Larosche, Carl J. / Fraczek, John	Classification of alkali–silica reaction damage using acoustic emission: A proof-of-concept study	406-413
Mo, Kim Hung / Alengaram, U. Johnson / Jumaat, Mohd Zamin / Liu, Michael Yong Jing	Contribution of acrylic fibre addition and ground granulated blast furnace slag on the properties of lightweight concrete	686-695
Carsana, Maddalena / Marra, Eleonora / Bertolini, Luca	Corrosion behaviour of metal inserts in simulated ancient masonry mortars	457-466
Bautista, A. / Alvarez, S. M. / Paredes, E. C. / Velasco, F. / Guzman, S.	Corrugated stainless steels embedded in carbonated mortars with and without chlorides: 9-Year corrosion results	186-196
Santamaría-Vicario, I. / Rodríguez, A. / Gutiérrez-González, S. / Calderón, V.	Design of masonry mortars fabricated concurrently with different steel slag aggregates	197-206
Nicolaides, Demetris / Kanellopoulos, Antonis / Petrou, Michael / Savva, Pericles / Mina, Anna	Development of a new Ultra High Performance Fibre Reinforced Cementitious Composite (UHPFRCC) for impact and blast protection of structures	667-674
Senff, L. / Modolo, R. C. E. / Ascensão, G. / Hotza, D. / Ferreira, V. M. / Labrincha, J. A.	Development of mortars containing superabsorbent polymer	575-584
Yu, Linwen / François, Raoul / Dang, Vu Hiep / L'Hostis, Valérie / Gagné, Richard	Distribution of corrosion and pitting factor of steel in corroded RC beams	384-392
Hakamy, A. / Shaikh, F. U. A. / Low, I. M.	Effect of calcined nanoclay on microstructural and mechanical properties of chemically treated hemp fabric-reinforced cement nanocomposites	882-891
Varas-Muriel, M. J. / Pérez-Monserrat, E. M. / Vazquez-Calvo, C. / Fort, R.	Effect of conservation treatments on heritage stone. Characterisation of decay processes in a case study	611-622
Kim, Hyun Hwan / Lee, Soon-Jae	Effect of crumb rubber on viscosity of rubberized asphalt binders containing wax additives	65-73
Muthu Kumar, E. / Ramamurthy, K.	Effect of fineness and dosage of aluminium powder on the properties of moist-cured aerated concrete	486-496
Subaşı, Azime / Emiroglu, Mehmet	Effect of metakaolin substitution on physical, mechanical and hydration process of White Portland cement	257-268
Farzadnia, Nima / Noorvand, Hossein / Yasin, Abdirahman Mohamed / Nora A. Aziz, Farah	The effect of nano silica on short term drying shrinkage of POFA cement mortars	636-646
Makhloufi, Z. / Chettih, M. / Bederina, M. / Kadri, E. l. Hadj / Bouhicha, M.	Effect of quaternary cementitious systems containing limestone, blast furnace slag and natural pozzolan on mechanical behavior of limestone mortars	647-657
Aliha, M. R. M. / Fazaeli, H. / Aghajani, S. / Nejad, F. Moghadas	Effect of temperature and air void on mixed mode fracture toughness of modified asphalt mixtures	545-555
Torres, Anthony / Hu, Jiong / Ramos, Amy	The effect of the cementitious paste thickness on the performance of pervious concrete	850-859
Jo, Byung Wan / Chakraborty, Sumit / Jo, Jun Ho / Lee, Yun Sung	Effectiveness of carbonated lime as a raw material in producing a CO2-stored cementitious material by the hydrothermal method	556-565
Li, Wengui / Huang, Zhengyu / Cao, Fangliang / Sun, Zhihui / Shah, Surendra P.	Effects of nano-silica and nano-limestone on flowability and mechanical properties of ultra-high-performance concrete matrix	366-374
Cheng, Hui / Lin, Kae-Long / Cui, Rong / Hwang, Chao-Lung / Chang, Yu-Min / Cheng, Ta-Wui	The effects of SiO2/Na2O molar ratio on the characteristics of alkali-activated waste catalyst–metakaolin based geopolymers	710-720
Angelin, Andressa F. / Andrade, Matheus F. F. / Bonatti, Rodrigo / Cecche Lintz, Rosa C. / Gachet-Barbosa, Luísa A. / Osório, Wislei R.	Effects of spheroid and fiber-like waste-tire rubbers on interrelation of strength-to-porosity in rubberized cement and mortars	525-536
Jacquier, Nicolas / Girhammar, Ulf Arne	Evaluation of bending tests on composite glulam–CLT beams connected with double-sided punched metal plates and inclined screws	762-773
Guercio, Maria Chiara / Mehta, Yusuf / McCarthy, Leslie Myers	Evaluation of fatigue cracking performance of asphalt mixtures under heavy static and dynamic aircraft loads	813-819
Mastali, M. / Ghasemi Naghibdehi, M. / Naghipour, M. / Rabiee, S. M.	Experimental assessment of functionally graded reinforced concrete (FGRC) slabs under drop weight and projectile impacts	296-311
Bezgin, Niyazi Ozgur	An experimental evaluation to determine the required thickness of passive fire protection layer for high strength concrete tunnel segments	279-286
Nicolaides, Demetris / Kanellopoulos, Antonis / Savva, Pericles / Petrou, Michael	Experimental field investigation of impact and blast load resistance of Ultra High Performance Fibre Reinforced Cementitious Composites (UHPFRCCs)	566-574
Yang, Hui / Song, Hengwen / Zhang, Shi	Experimental investigation of the behavior of aramid fiber reinforced polymer confined concrete subjected to high strain-rate compression	143-151
Lavasani, Mohammad / Latifi Namin, Manouchehr / Fartash, Homa	Experimental investigation on mineral and organic fibers effect on resilient modulus and dynamic creep of stone matrix asphalt and continuous graded mixtures in three temperature levels	232-242
Tahsiri, Hamidreza / Sedehi, Omid / Khaloo, Alireza / Molaei Raisi, Elias	Experimental study of RC jacketed and CFRP strengthened RC beams	476-485
Wang, Hailong / Sun, Xiaoyan / Peng, Guangyu / Luo, Yuejing / Ying, Qiming	Experimental study on bond behaviour between BFRP bar and engineered cementitious composite	448-456
Buratti, N. / Mazzotti, C.	Experimental tests on the effect of temperature on the long-term behaviour of macrosynthetic Fibre Reinforced Concretes	133-142
Zheng, X. H. / Huang, P. Y. / Chen, G. M. / Tan, X. M.	Fatigue behavior of FRP–concrete bond under hygrothermal environment	898-909
Liu, Feng / Meng, Liang-yu / Ning, Guo-Fang / Li, Li-Juan	Fatigue performance of rubber-modified recycled aggregate concrete (RRAC) for pavement	207-217
Kim, Hyeong-Ki	Feasibility study on measurement of water absorption in fine aggregate with macroporous surface via centrifugal compaction	421-430
Fossetti, Marinella / Minafò, Giovanni / Papia, Maurizio	Flexural behaviour of glulam timber beams reinforced with FRP cords	54-64
Güneyisi, Erhan / Gesoǧlu, Mehmet / Al-Goody, Asraa / İpek, Süleyman	Fresh and rheological behavior of nano-silica and fly ash blended self-compacting concrete	29-44
Snoeck, D. / De Belie, N.	From straw in bricks to modern use of microfibers in cementitious composites for improved autogenous healing – A review	774-787
Kuity, Ambika / Das, Animesh	Homogeneity of filler distribution within asphalt mix – A microscopic study	497-505
Kaminskas, Rimvydas / Česnauskas, Vytautas / Kubiliute, Raimonda	Influence of different artificial additives on Portland cement hydration and hardening	537-544
Halvaei, M. / Jamshidi, M. / Pakravan, H. R. / Latifi, M.	Interfacial bonding of fine aggregate concrete to low modulus fibers	117-123
Hossain, Zahid / Bairgi, Biswajit / Belshe, Mark	Investigation of moisture damage resistance of GTR-modified asphalt binder by static contact angle measurements	45-53
Mikami, Takamasa / Kang, Yong-Hak / Choi, Soo-Kyung	Judging indices for evaluating the exfoliation of synthetic resin floorings using the impact acoustics method	345-354
Pliya, P. / Cree, D.	Limestone derived eggshell powder as a replacement in Portland cement mortar	1-9
Praticò, Filippo G. / Vaiana, Rosolino / Iuele, Teresa	Macrotexture modeling and experimental validation for pavement surface treatments	658-666
Tian, He / Zhang, Y. X. / Ye, L. / Yang, Chunhui	Mechanical behaviours of green hybrid fibre-reinforced cementitious composites	152-163
Pinto, Deesy / Bernardo, Luís / Amaro, Ana / Lopes, Sergio	Mechanical properties of epoxy nanocomposites using titanium dioxide as reinforcement – A review	506-524
Wang, Jiabin / Niu, Ditao / Zhang, Yongli	Mechanical properties, permeability and durability of accelerated shotcrete	312-328
Shen, Lei / Ren, Qingwen / Xia, Ning / Sun, Liguo / Xia, Xiaozhou	Mesoscopic numerical simulation of effective thermal conductivity of tensile cracked concrete	467-475
Jeong, Yeonung / Park, Hyeoneun / Jun, Yubin / Jeong, Jae-Hong / Oh, Jae Eun	Microstructural verification of the strength performance of ternary blended cement systems with high volumes of fly ash and GGBFS	96-107
Barbhuiya, Salim / Chow, PengLoy / Memon, Shazim	Microstructure, hydration and nanomechanical properties of concrete containing metakaolin	696-702
Barone, G. / Mazzoleni, P. / Pappalardo, G. / Raneri, S.	Microtextural and microstructural influence on the changes of physical and mechanical proprieties related to salts crystallization weathering in natural building stones. The example of Sabucina stone (Sicily)	355-365
Gao, Dongdong / Wang, Pengbin / Li, Ming / Luo, Wenbo	Modelling of nonlinear viscoelastic creep behaviour of hot-mix asphalt	329-336
Zhang, Hongru / Zhao, Yuxi / Meng, Tao / Shah, Surendra P.	The modification effects of a nano-silica slurry on microstructure, strength, and strain development of recycled aggregate concrete applied in an enlarged structural test	721-735
Jin, Liu / Zhang, Renbo / Du, Xiuli / Li, Yue	Multi-scale analytical theory of the diffusivity of concrete subjected to mechanical stress	171-185
Greco, Fabrizio / Leonetti, Lorenzo / Luciano, Raimondo	A multiscale model for the numerical simulation of the anchor bolt pull-out test in lightweight aggregate concrete	860-874
Tabrizi, Salar / Kazem, Hamid / Rizkalla, Sami / Kobayashi, Akira	New small-diameter CFRP material for flexural strengthening of steel bridge girders	748-756
Huang, Zhenyu / Liew, J. Y. Richard	Nonlinear finite element modelling and parametric study of curved steel–concrete–steel double skin composite panels infilled with ultra-lightweight cement composite	922-938
Lotfi, Somayeh / Eggimann, Manuel / Wagner, Eckhard / Mróz, Radosław / Deja, Jan	Performance of recycled aggregate concrete based on a new concrete recycling technology	243-256
Elgabbas, Fareed / Ahmed, Ehab A. / Benmokrane, Brahim	Physical and mechanical characteristics of new basalt-FRP bars for reinforcing concrete structures	623-635
Brencich, A.	A post-installed insert for pull-out tests on concrete up to 70MPa	788-801
Afshinnia, Kaveh / Poursaee, Amir	The potential of ground clay brick to mitigate Alkali–Silica Reaction in mortar prepared with highly reactive aggregate	164-170
Keskin, Hakan / Kucuktuvek, Mustafa / Gürü, Metin	The potential of poppy (Papaver somniferum Linnaeus) husk for manufacturing wood-based particleboards	224-231
Li, Jing / Zhuang, Xinguo / Leiva, Carlos / Cornejo, Ana / Font, Oriol / Querol, Xavier / Moeno, Natalia / Arenas, Celia / Fernandez-Pereira, Constantino	Potential utilization of FGD gypsum and fly ash from a Chinese power plant for manufacturing fire-resistant panels	910-921
Uchima, Juan S. / Restrepo, Oscar J. / Tobón, Jorge I.	Pozzolanicity of the material obtained in the simultaneous calcination of biomass and kaolinitic clay	414-420
Qin, Juan / Cui, Chong / Cui, Xiaoyu / Hussain, Ahmad / Yang, Chuanmeng	Preparation and characterization of ceramsite from lime mud and coal fly ash	10-17
Lee, W. J. / Weber, B. / Leinenbach, C.	Recovery stress formation in a restrained Fe–Mn–Si-based shape memory alloy used for prestressing or mechanical joining	600-610
Sua-iam, Gritsada / Makul, Natt	Rheological and mechanical properties of cement–fly ash self-consolidating concrete incorporating high volumes of alumina-based material as fine aggregate	736-747
Laukkanen, Olli-Ville / Soenen, Hilde	Rheological characterization of wax modified bituminous binders: Effect of specimen preparation and thermal history	269-278
Rodrigues, Hugo / Arêde, António / Furtado, André / Rocha, Patrício	Seismic behavior of strengthened RC columns under biaxial loading: An experimental characterization	393-405
Rashadul Islam, Md / Hossain, Mohammad Imran / Tarefder, Rafiqul A.	A study of asphalt aging using Indirect Tensile Strength test	218-223
Selman, Efe / Ghiami, Amir / Alver, Ninel	Study of fracture evolution in FRP-strengthened reinforced concrete beam under cyclic load by acoustic emission technique: An integrated mechanical-acoustic energy approach	832-841
Arenas, Celia / Leiva, Carlos / Vilches, Luis F. / Cifuentes, Héctor / Rodriguez-Galán, Mónica	Technical specifications for highway noise barriers made of coal bottom ash-based sound absorbing concrete	585-591
Güney, Bilge Alp / Caner, Evin	Thermal and hygric expansion characteristics of mortars and bricks used in the dome structures of Turkish Baths from 14th and 15th centuries	757-761
Gerard, Pierre / Mahdad, Mohamed / Robert McCormack, Alexandre / François, Bertrand	A unified failure criterion for unstabilized rammed earth materials upon varying relative humidity conditions	437-447
Yikici, Tahsin Alper / Chen, Hung-Liang (Roger)	Use of maturity method to estimate compressive strength of mass concrete	802-812
Yuan, Guanglin / Li, Qingtao	The use of surface coating in enhancing the mechanical properties and durability of concrete exposed to elevated temperature	375-383
Muñoz, J. F. / Easton, T. / Dahmen, J.	Using alkali-activated natural aluminosilicate minerals to produce compressed masonry construction materials	86-95
Haddadi, Farshad / Ameri, Mahmoud / Mirabimoghadam, Mohammad H. / Hosseini, Hamid R. Amiri	Validation of a simplified method in viscoelastic continuum damage (VECD) model developed for flexural mode of loading	892-897
Chen, Dar Hao / Scullion, Tom	Very Thin Overlays in Texas	108-116
Bernardes, Elen E. / Carrasco, Edgar V. Mantilla / Vasconcelos, Wander L. / de Magalhães, Aldo G.	X-ray microtomography (μ-CT) to analyze the pore structure of a Portland cement composite based on the selection of different regions of interest	703-709
Gunasekara, Chamila / Law, David W. / Setunge, Sujeeva / Sanjayan, Jay G.	Zeta potential, gel formation and compressive strength of low calcium fly ash geopolymers	592-599

Informations
sur cette fiche
IssueID
22569
Publié(e) le:
15.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - octobre 2015

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - octobre 2015

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.