Construction and Building Materials - March 2015

Published:	March 2015

Articles in this Issue

Author(s)	Title	Page(s)
Rueda, Jorge / Dapena, Enrique / Alaejos, Pilar / Menéndez de Llano, Susana	An accelerated test to assess the quality of recycled concrete sands based on their absorption capacity	464-469
Alonso, M. M. / Puertas, F.	Adsorption of PCE and PNS superplasticisers on cubic and orthorhombic C3A. Effect of sulfate	324-332
Lu, Qing / Bors, John	Alternate uses of epoxy asphalt on bridge decks and roadways	18-25
Bedon, C. / Rinaldin, G. / Izzi, M. / Fragiacomo, M. / Amadio, C.	Assessment of the structural stability of Blockhaus timber log-walls under in-plane compression via full-scale buckling experiments	474-490
Kaish, A. B. M. A. / Jamil, M. / Raman, S. N. / Zain, M. F. M.	Axial behavior of ferrocement confined cylindrical concrete specimens with different sizes	50-59
Hossain, Mohammad I. / Tarefder, Rafiqul A.	Behavior of asphalt mastic films under laboratory controlled humidity conditions	8-17
Roh, In-Taek / Jung, Kyung-Chae / Chang, Seung-Hwan / Cho, Yoon-Ho	Characterization of compliant polymer concretes for rapid repair of runways	77-84
Wu, Bo / Zhang, Shuyi / Yang, Yong	Compressive behaviors of cubes and cylinders made of normal-strength demolished concrete blocks and high-strength fresh concrete	342-353
Iliopoulos, S. / Aggelis, D. G. / Pyl, L. / Vantomme, J. / Van Marcke, P. / Coppens, E. / Areias, L.	Detection and evaluation of cracks in the concrete buffer of the Belgian Nuclear Waste container using combined NDT techniques	369-378
Sen, Rajan	Developments in the durability of FRP-concrete bond	112-125
Richardson, Alan / Coventry, Kathryn	Dovetailed and hybrid synthetic fibre concrete – Impact, toughness and strength performance	439-449
Abdalkader, Ashraf H. M. / Lynsdale, Cyril J. / Cripps, John C.	The effect of chloride on cement mortar subjected to sulfate exposure at low temperature	102-111
Yoon, Minho / Kim, Gyuyong / Choe, Gyeong Choel / Lee, Youngwook / Lee, Taegyu	Effect of coarse aggregate type and loading level on the high temperature properties of concrete	26-33
Nahali, H. / Dhouibi, L. / Idrissi, H.	Effect of Na3PO4 addition in mortar on steel reinforcement corrosion behavior in 3% NaCl solution	92-101
Yun, Kyong-Ku / Choi, Sung-Yong / Yeon, Jung Heum	Effects of admixtures on the rheological properties of high-performance wet-mix shotcrete mixtures	194-202
Ghafoori, Nader / Najimi, Meysam / Diawara, Hamidou / Islam, Mohammad S.	Effects of class F fly ash on sulfate resistance of Type V Portland cement concretes under continuous and interrupted sulfate exposures	85-91
Šiler, Pavel / Bayer, Petr / Sehnal, Tomáš / Kolářová, Iva / Opravil, Tomáš / Šoukal, František	Effects of high-temperature fly ash and fluidized bed combustion ash on the hydration of Portland cement	181-188
Johnson, O. A. / Madzlan, N. / Kamaruddin, I.	Encapsulation of petroleum sludge in building blocks	281-288
Medina, Eduardo / Medina, Juan Manuel / Cobo, Alfonso / Bastidas, David M.	Evaluation of mechanical and structural behavior of austenitic and duplex stainless steel reinforcements	1-7
Behbahani, H. / Ziari, H. / Kamboozia, N. / Mansour Khaki, A. / Mirabdolazimi, S. M.	Evaluation of performance and moisture sensitivity of glasphalt mixtures modified with nanotechnology zycosoil as an anti-stripping additive	60-68
Zahedi, Mahboubeh / Ramezanianpour, Ali Akbar / Ramezanianpour, Amir Mohammad	Evaluation of the mechanical properties and durability of cement mortars containing nanosilica and rice husk ash under chloride ion penetration	354-361
Ye, Qing / Yu, Kaikai / Zhang, Zenan	Expansion of ordinary Portland cement paste varied with nano-MgO	189-193
Casapulla, C. / Portioli, F.	Experimental and analytical investigation on the frictional contact behavior of 3D masonry block assemblages	126-143
Santos, Ana C. P. / Ortiz-Lozano, Jose A. / Villegas, Noe / Aguado, Antonio	Experimental study about the effects of granular skeleton distribution on the mechanical properties of self-compacting concrete (SCC)	40-49
Zhang, Yongxing / Bai, Shu / Zhang, Qingbin / Xie, Haibo / Zhang, Xueming	Failure behavior of strain hardening cementitious composites for shear strengthening RC member	470-473
Siva Chidambaram, R. / Agarwal, Pankaj	Flexural and shear behavior of geo-grid confined RC beams with steel fiber reinforced concrete	271-280
Huynh, Luan / Foster, Stephen / Valipour, Hamid / Randall, Robert	High strength and reactive powder concrete columns subjected to impact: Experimental investigation	153-171
Ćosić, K. / Korat, L. / Ducman, V. / Netinger, I.	Influence of aggregate type and size on properties of pervious concrete	69-76
Norambuena-Contreras, J. / Gonzalez-Torre, I.	Influence of geosynthetic type on retarding cracking in asphalt pavements	421-429
Zhu, Hong-bo / Yan, Mei-zhu / Wang, Pei-Ming / Li, Chen / Cheng, Yi-jie	Mechanical performance of concrete combined with a novel high strength organic fiber	289-294
Shariati, Mahmoud / Farzi, Gholamali / Dadrasi, Ali	Mechanical properties and energy absorption capability of thin-walled square columns of silica/epoxy nanocomposite	362-368
Wang, Jiabin / Niu, Ditao / Ding, Sha / Mi, Zelong / Luo, Daming	Microstructure, permeability and mechanical properties of accelerated shotcrete at different curing age	203-216
Horszczaruk, Elzbieta / Mijowska, Ewa / Kalenczuk, Ryszard J. / Aleksandrzak, Małgorzata / Mijowska, Sylwia	Nanocomposite of cement/graphene oxide – Impact on hydration kinetics and Young's modulus	234-242
Lecompte, T. / Perrot, A. / Subrianto, A. / Le Duigou, A. / Ausias, G.	A novel pull-out device used to study the influence of pressure during processing of cement-based material reinforced with coir	224-233
Şanal, İrem / Özyurt Zihnioğlu, Nilüfer / Hosseini, Ardalan	Particle image velocimetry (PIV) to evaluate fresh and hardened state properties of self compacting fiber-reinforced cementitious composites (SC-FRCCs)	450-463
Wasim, Muhammad / Hussain, Raja Rizwan	Passive film formation and corrosion initiation in lightweight concrete structures as compared to self compacting and ordinary concrete structures at elevated temperature in chloride rich marine environment	144-152
Lin, Deng-Fong / Chou, Liang-Hsiung / Wang, Yu-Kai / Luo, Huan-Lin	Performance evaluation of asphalt concrete test road partially paved with industrial waste – Basic oxygen furnace slag	315-323
Heikal, Mohamed / Radwan, M. M. / Al-Duaij, O. K.	Physico-mechanical characteristics and durability of calcium aluminate blended cement subject to different aggressive media	379-385
Genovés, V. / Soriano, L. / Borrachero, M. V. / Eiras, J. / Payá, J.	Preliminary study on short-term sulphate attack evaluation by non-linear impact resonance acoustic spectroscopy technique	295-302
Sadowski, Łukasz / Nikoo, Mehdi / Nikoo, Mehrdad	Principal Component Analysis combined with a Self Organization Feature Map to determine the pull-off adhesion between concrete layers	386-396
Yang, Yang / Sneed, Lesley H. / Morgan, Adam / Saiidi, M. Saiid / Belarbi, Abdeldjelil	Repair of RC bridge columns with interlocking spirals and fractured longitudinal bars – An experimental study	405-420
Falchi, Laura / Varin, Cristiano / Toscano, Giuseppa / Zendri, Elisabetta	Statistical analysis of the physical properties and durability of water-repellent mortars made with limestone cement, natural hydraulic lime and pozzolana-lime	260-270
Ahmed, Ehsan / Légeron, Frédéric / Ouahla, Mohamed	Steel fiber as replacement of minimum shear reinforcement for one-way thick bridge slab	303-314
Pan, Zuanfeng / Wu, Chang / Liu, Jianzhong / Wang, Wei / Liu, Jiwei	Study on mechanical properties of cost-effective polyvinyl alcohol engineered cementitious composites (PVA-ECC)	397-404
Nakahata, K. / Kawamura, G. / Yano, T. / Hirose, S.	Three-dimensional numerical modeling of ultrasonic wave propagation in concrete and its experimental validation	217-223
Zhao, Yanhua / Chang, Jianmei / Gao, Hongbo	A three-parameter R-curve of concrete-like quasi-brittle materials	243-249
Zhao, Jihui / Wang, Dongmin / Wang, Xueguang / Liao, Shucong / Lin, Hui	Ultrafine grinding of fly ash with grinding aids: Impact on particle characteristics of ultrafine fly ash and properties of blended cement containing ultrafine fly ash	250-259
Maskell, Daniel / Heath, Andrew / Walker, Pete	Use of metakaolin with stabilised extruded earth masonry units	172-180
Safi, Brahim / Saidi, Mohammed / Daoui, Abdelhakim / Bellal, Ahmed / Mechekak, Ali / Toumi, Kamel	The use of seashells as a fine aggregate (by sand substitution) in self-compacting mortar (SCM)	430-438
Hossack, Ashlee M. / Thomas, Michael D. A.	Varying fly ash and slag contents in Portland limestone cement mortars exposed to external sulfates	333-341
Zhang, Jiupeng / Yang, Fenghua / Pei, Jianzhong / Xu, Shicui / An, Fengwei	Viscosity-temperature characteristics of warm mix asphalt binder with Sasobit®	34-39

About this
data sheet
IssueID
22564
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - March 2015

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - March 2015

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.