Construction and Building Materials - März 2015

Erschienen:	März 2015

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Rueda, Jorge / Dapena, Enrique / Alaejos, Pilar / Menéndez de Llano, Susana	An accelerated test to assess the quality of recycled concrete sands based on their absorption capacity	464-469
Alonso, M. M. / Puertas, F.	Adsorption of PCE and PNS superplasticisers on cubic and orthorhombic C3A. Effect of sulfate	324-332
Lu, Qing / Bors, John	Alternate uses of epoxy asphalt on bridge decks and roadways	18-25
Bedon, C. / Rinaldin, G. / Izzi, M. / Fragiacomo, M. / Amadio, C.	Assessment of the structural stability of Blockhaus timber log-walls under in-plane compression via full-scale buckling experiments	474-490
Kaish, A. B. M. A. / Jamil, M. / Raman, S. N. / Zain, M. F. M.	Axial behavior of ferrocement confined cylindrical concrete specimens with different sizes	50-59
Hossain, Mohammad I. / Tarefder, Rafiqul A.	Behavior of asphalt mastic films under laboratory controlled humidity conditions	8-17
Roh, In-Taek / Jung, Kyung-Chae / Chang, Seung-Hwan / Cho, Yoon-Ho	Characterization of compliant polymer concretes for rapid repair of runways	77-84
Wu, Bo / Zhang, Shuyi / Yang, Yong	Compressive behaviors of cubes and cylinders made of normal-strength demolished concrete blocks and high-strength fresh concrete	342-353
Iliopoulos, S. / Aggelis, D. G. / Pyl, L. / Vantomme, J. / Van Marcke, P. / Coppens, E. / Areias, L.	Detection and evaluation of cracks in the concrete buffer of the Belgian Nuclear Waste container using combined NDT techniques	369-378
Sen, Rajan	Developments in the durability of FRP-concrete bond	112-125
Richardson, Alan / Coventry, Kathryn	Dovetailed and hybrid synthetic fibre concrete – Impact, toughness and strength performance	439-449
Abdalkader, Ashraf H. M. / Lynsdale, Cyril J. / Cripps, John C.	The effect of chloride on cement mortar subjected to sulfate exposure at low temperature	102-111
Yoon, Minho / Kim, Gyuyong / Choe, Gyeong Choel / Lee, Youngwook / Lee, Taegyu	Effect of coarse aggregate type and loading level on the high temperature properties of concrete	26-33
Nahali, H. / Dhouibi, L. / Idrissi, H.	Effect of Na3PO4 addition in mortar on steel reinforcement corrosion behavior in 3% NaCl solution	92-101
Yun, Kyong-Ku / Choi, Sung-Yong / Yeon, Jung Heum	Effects of admixtures on the rheological properties of high-performance wet-mix shotcrete mixtures	194-202
Ghafoori, Nader / Najimi, Meysam / Diawara, Hamidou / Islam, Mohammad S.	Effects of class F fly ash on sulfate resistance of Type V Portland cement concretes under continuous and interrupted sulfate exposures	85-91
Šiler, Pavel / Bayer, Petr / Sehnal, Tomáš / Kolářová, Iva / Opravil, Tomáš / Šoukal, František	Effects of high-temperature fly ash and fluidized bed combustion ash on the hydration of Portland cement	181-188
Johnson, O. A. / Madzlan, N. / Kamaruddin, I.	Encapsulation of petroleum sludge in building blocks	281-288
Medina, Eduardo / Medina, Juan Manuel / Cobo, Alfonso / Bastidas, David M.	Evaluation of mechanical and structural behavior of austenitic and duplex stainless steel reinforcements	1-7
Behbahani, H. / Ziari, H. / Kamboozia, N. / Mansour Khaki, A. / Mirabdolazimi, S. M.	Evaluation of performance and moisture sensitivity of glasphalt mixtures modified with nanotechnology zycosoil as an anti-stripping additive	60-68
Zahedi, Mahboubeh / Ramezanianpour, Ali Akbar / Ramezanianpour, Amir Mohammad	Evaluation of the mechanical properties and durability of cement mortars containing nanosilica and rice husk ash under chloride ion penetration	354-361
Ye, Qing / Yu, Kaikai / Zhang, Zenan	Expansion of ordinary Portland cement paste varied with nano-MgO	189-193
Casapulla, C. / Portioli, F.	Experimental and analytical investigation on the frictional contact behavior of 3D masonry block assemblages	126-143
Santos, Ana C. P. / Ortiz-Lozano, Jose A. / Villegas, Noe / Aguado, Antonio	Experimental study about the effects of granular skeleton distribution on the mechanical properties of self-compacting concrete (SCC)	40-49
Zhang, Yongxing / Bai, Shu / Zhang, Qingbin / Xie, Haibo / Zhang, Xueming	Failure behavior of strain hardening cementitious composites for shear strengthening RC member	470-473
Siva Chidambaram, R. / Agarwal, Pankaj	Flexural and shear behavior of geo-grid confined RC beams with steel fiber reinforced concrete	271-280
Huynh, Luan / Foster, Stephen / Valipour, Hamid / Randall, Robert	High strength and reactive powder concrete columns subjected to impact: Experimental investigation	153-171
Ćosić, K. / Korat, L. / Ducman, V. / Netinger, I.	Influence of aggregate type and size on properties of pervious concrete	69-76
Norambuena-Contreras, J. / Gonzalez-Torre, I.	Influence of geosynthetic type on retarding cracking in asphalt pavements	421-429
Zhu, Hong-bo / Yan, Mei-zhu / Wang, Pei-Ming / Li, Chen / Cheng, Yi-jie	Mechanical performance of concrete combined with a novel high strength organic fiber	289-294
Shariati, Mahmoud / Farzi, Gholamali / Dadrasi, Ali	Mechanical properties and energy absorption capability of thin-walled square columns of silica/epoxy nanocomposite	362-368
Wang, Jiabin / Niu, Ditao / Ding, Sha / Mi, Zelong / Luo, Daming	Microstructure, permeability and mechanical properties of accelerated shotcrete at different curing age	203-216
Horszczaruk, Elzbieta / Mijowska, Ewa / Kalenczuk, Ryszard J. / Aleksandrzak, Małgorzata / Mijowska, Sylwia	Nanocomposite of cement/graphene oxide – Impact on hydration kinetics and Young's modulus	234-242
Lecompte, T. / Perrot, A. / Subrianto, A. / Le Duigou, A. / Ausias, G.	A novel pull-out device used to study the influence of pressure during processing of cement-based material reinforced with coir	224-233
Şanal, İrem / Özyurt Zihnioğlu, Nilüfer / Hosseini, Ardalan	Particle image velocimetry (PIV) to evaluate fresh and hardened state properties of self compacting fiber-reinforced cementitious composites (SC-FRCCs)	450-463
Wasim, Muhammad / Hussain, Raja Rizwan	Passive film formation and corrosion initiation in lightweight concrete structures as compared to self compacting and ordinary concrete structures at elevated temperature in chloride rich marine environment	144-152
Lin, Deng-Fong / Chou, Liang-Hsiung / Wang, Yu-Kai / Luo, Huan-Lin	Performance evaluation of asphalt concrete test road partially paved with industrial waste – Basic oxygen furnace slag	315-323
Heikal, Mohamed / Radwan, M. M. / Al-Duaij, O. K.	Physico-mechanical characteristics and durability of calcium aluminate blended cement subject to different aggressive media	379-385
Genovés, V. / Soriano, L. / Borrachero, M. V. / Eiras, J. / Payá, J.	Preliminary study on short-term sulphate attack evaluation by non-linear impact resonance acoustic spectroscopy technique	295-302
Sadowski, Łukasz / Nikoo, Mehdi / Nikoo, Mehrdad	Principal Component Analysis combined with a Self Organization Feature Map to determine the pull-off adhesion between concrete layers	386-396
Yang, Yang / Sneed, Lesley H. / Morgan, Adam / Saiidi, M. Saiid / Belarbi, Abdeldjelil	Repair of RC bridge columns with interlocking spirals and fractured longitudinal bars – An experimental study	405-420
Falchi, Laura / Varin, Cristiano / Toscano, Giuseppa / Zendri, Elisabetta	Statistical analysis of the physical properties and durability of water-repellent mortars made with limestone cement, natural hydraulic lime and pozzolana-lime	260-270
Ahmed, Ehsan / Légeron, Frédéric / Ouahla, Mohamed	Steel fiber as replacement of minimum shear reinforcement for one-way thick bridge slab	303-314
Pan, Zuanfeng / Wu, Chang / Liu, Jianzhong / Wang, Wei / Liu, Jiwei	Study on mechanical properties of cost-effective polyvinyl alcohol engineered cementitious composites (PVA-ECC)	397-404
Nakahata, K. / Kawamura, G. / Yano, T. / Hirose, S.	Three-dimensional numerical modeling of ultrasonic wave propagation in concrete and its experimental validation	217-223
Zhao, Yanhua / Chang, Jianmei / Gao, Hongbo	A three-parameter R-curve of concrete-like quasi-brittle materials	243-249
Zhao, Jihui / Wang, Dongmin / Wang, Xueguang / Liao, Shucong / Lin, Hui	Ultrafine grinding of fly ash with grinding aids: Impact on particle characteristics of ultrafine fly ash and properties of blended cement containing ultrafine fly ash	250-259
Maskell, Daniel / Heath, Andrew / Walker, Pete	Use of metakaolin with stabilised extruded earth masonry units	172-180
Safi, Brahim / Saidi, Mohammed / Daoui, Abdelhakim / Bellal, Ahmed / Mechekak, Ali / Toumi, Kamel	The use of seashells as a fine aggregate (by sand substitution) in self-compacting mortar (SCM)	430-438
Hossack, Ashlee M. / Thomas, Michael D. A.	Varying fly ash and slag contents in Portland limestone cement mortars exposed to external sulfates	333-341
Zhang, Jiupeng / Yang, Fenghua / Pei, Jianzhong / Xu, Shicui / An, Fengwei	Viscosity-temperature characteristics of warm mix asphalt binder with Sasobit®	34-39

Über diese
Datenseite
IssueID
22564
Veröffentlicht am:
15.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - März 2015

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - März 2015

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.