Construction and Building Materials - September 2015

Published:	September 2015

Articles in this Issue

Author(s)	Title	Page(s)
Yu, Zhiwu / Chen, Ying / Liu, Peng / Wang, Weilun	Accelerated simulation of chloride ingress into concrete under drying–wetting alternation condition chloride environment	205-213
Park, Hyeon Ku / Kim, Hang	Acoustic insulation performance of improved airtight windows	542-550
Thomas, Robert J. / Peethamparan, Sulapha	Alkali-activated concrete: Engineering properties and stress–strain behavior	49-56
Sánchez-Beitia, S. / Crespo de Antonio, M. / Acuña, L.	Applicability of the Hole-Drilling procedure for stresses quantification in timber bending elements in service	798-805
Wang, Shifeng / Wang, Qiang / Wu, Xiaoyu / Zhang, Yong	Asphalt modified by thermoplastic elastomer based on recycled rubber	678-684
Tondolo, F.	Bond behaviour with reinforcement corrosion	926-932
Lagier, F. / Massicotte, B. / Charron, J.-P.	Bond strength of tension lap splice specimens in UHPFRC	84-94
Zhang, Yuge / Sun, Yifan / Xu, Ke / Yuan, Zuanru / Zhang, Jing / Chen, Ru / Xie, Hongfeng / Cheng, Rongshi	Brucite modified epoxy mortar binders: Flame retardancy, thermal and mechanical characterization	1089-1096
Abdalqader, Ahmed F. / Jin, Fei / Al-Tabbaa, Abir	Characterisation of reactive magnesia and sodium carbonate-activated fly ash/slag paste blends	506-513
Huang, Weidong / Tang, Naipeng	Characterizing SBS modified asphalt with sulfur using multiple stress creep recovery test	514-521
Walubita, Lubinda F. / Faruk, Abu N. M. / Zhang, Jun / Hu, Xiaodi	Characterizing the cracking and fracture properties of geosynthetic interlayer reinforced HMA samples using the Overlay Tester (OT)	695-702
Cuadri, A. A. / Partal, P. / Ahmad, N. / Grenfell, J. / Airey, G.	Chemically modified bitumens with enhanced rheology and adhesion properties to siliceous aggregates	766-774
Chen, Yuxuan / Shui, Zhonghe / Chen, Wei / Chen, Guowei	Chloride binding of synthetic Ca–Al–NO3 LDHs in hardened cement paste	1051-1058
Simčič, Tina / Pejovnik, Stane / De Schutter, Geert / Bosiljkov, Violeta Bokan	Chloride ion penetration into fly ash modified concrete during wetting–drying cycles	1216-1223
Ahmed, M. U. / Rahman, A. / Islam, M. R. / Tarefder, R. A.	Combined effect of asphalt concrete cross-anisotropy and temperature variation on pavement stress–strain under dynamic loading	685-694
Zheng, Mulian / Han, Lili / Wang, Fei / Mi, Haichen / Li, Yifeng / He, Litao	Comparison and analysis on heat reflective coating for asphalt pavement based on cooling effect and anti-skid performance	1197-1205
Balczár, Ida / Korim, Tamás / Dobrádi, Annamária	Correlation of strength to apparent porosity of geopolymers – Understanding through variations of setting time	983-988
Liu, Ming / Cheng, Xuequn / Li, Xiaogang / Jin, Zhu / Liu, Haixia	Corrosion behavior of Cr modified HRB400 steel rebar in simulated concrete pore solution	884-890
Bautista, A. / Paredes, E. C. / Velasco, F. / Alvarez, S. M.	Corrugated stainless steels embedded in mortar for 9years: Corrosion results of non-carbonated, chloride-contaminated samples	350-359
Oliveira, Miguel José / Ribeiro, António Bettencourt / Branco, Fernando Garrido	Curing effect in the shrinkage of a lower strength self-compacting concrete	1206-1215
Farnam, Yaghoob / Wiese, Andrew / Bentz, Dale / Davis, Jeffrey / Weiss, Jason	Damage development in cementitious materials exposed to magnesium chloride deicing salt	384-392
Qiao, Yunfeng / Sun, Wei / Jiang, Jinyang	Damage process of concrete subjected to coupling fatigue load and freeze/thaw cycles	806-811
Huang, Puxi / Chang, Wen-Shao / Ansell, Martin P. / Chew, Y. M. John / Shea, Andy	Density distribution profile for internodes and nodes of Phyllostachys edulis (Moso bamboo) by computer tomography scanning	197-204
Stefanidou, Maria / Pachta, Vasiliki / Papayianni, Ioanna	Design and testing of artificial stone for the restoration of stone elements in monuments and historic buildings	957-965
Salih, Moslih Amer / Farzadnia, Nima / Abang Ali, Abang Abdullah / Demirboğa, Ramazan	Development of high strength alkali activated binder using palm oil fuel ash and GGBS at ambient temperature	289-300
Fanghui, Han / Qiang, Wang / Jingjing, Feng	The differences among the roles of ground fly ash in the paste, mortar and concrete	172-179
Zhang, Wenyan / Hama, Yukio / Na, Seung Hyun	Drying shrinkage and microstructure characteristics of mortar incorporating ground granulated blast furnace slag and shrinkage reducing admixture	267-277
Ganesan, N. / Abraham, Ruby / Deepa Raj, S.	Durability characteristics of steel fibre reinforced geopolymer concrete	471-476
Hossain, M. M. / Karim, M. R. / Hossain, M. K. / Islam, M. N. / Zain, M. F. M.	Durability of mortar and concrete containing alkali-activated binder with pozzolans: A review	95-109
Ali, M. Shafqat / Ji, Chenhui / Mirza, M. Saeed	Durable design of reinforced concrete elements against corrosion	317-325
Meier, Markus R. / Sarigaphuti, Manasit / Sainamthip, Prinya / Plank, Johann	Early hydration of Portland cement studied under microgravity conditions	877-883
Li, Wei / Zhu, Xiaobin / Hong, Jinxiang / She, Wei / Wang, Penggang / Zuo, Wenqiang	Effect of anionic emulsifier on cement hydration and its interaction mechanism	1003-1011
Mostofinejad, Davood / Khozaei, Kamyar	Effect of GM patterns on ductility and debonding control of FRP sheets in RC strengthened beams	110-120
Li, Guowei / Wu, Jiantao / Ge, Wanming	Effect of loading rate and chemical corrosion on the mechanical properties of large diameter glass/basalt-glass FRP bars	1059-1066
Han, Dongyeop / Ferron, Raissa Douglas	Effect of mixing method on microstructure and rheology of cement paste	278-288
Coo, Michael / Pheeraphan, Thanakorn	Effect of sand, fly ash, and coarse aggregate gradation on preplaced aggregate concrete studied through factorial design	812-821
Lim, Nor Hasanah Abdul Shukor / Ismail, Mohamed A. / Lee, Han Seung / Hussin, Mohd Warid / Sam, Abdul Rahman Mohd. / Samadi, Mostafa	The effects of high volume nano palm oil fuel ash on microstructure properties and hydration temperature of mortar	29-34
Jiang, Guang / Rong, Zhidan / Sun, Wei	Effects of metakaolin on mechanical properties, pore structure and hydration heat of mortars at 0.17 w/b ratio	564-572
Zhou, Haijun / Lu, Jinlong / Xv, Xi / Dong, Biqing / Xing, Feng	Effects of stirrup corrosion on bond–slip performance of reinforcing steel in concrete: An experimental study	257-266
Xiao, Jianzhuang / Li, Long / Shen, Luming / Yuan, Junqiang	Effects of strain rate on mechanical behavior of modeled recycled aggregate concrete under uniaxial compression	214-222
Dong, Biqin / Qiu, Qiwen / Xiang, Jiaqi / Huang, Canjie / Sun, Hongfang / Xing, Feng / Liu, Wei	Electrochemical impedance interpretation of the carbonation behavior for fly ash–slag–cement materials	933-942
Sharma, Vandna / Vinayak, Hemant K. / Marwaha, Bhanu M.	Enhancing compressive strength of soil using natural fibers	943-949
Mohd Hasan, Mohd Rosli / You, Zhanping	Estimation of cumulative energy demand and green house gas emissions of ethanol foamed WMA using life cycle assessment analysis	1117-1124
Makowska, Michalina / Pellinen, Terhi	Etchable iron content (FETCH) proposed as the missing parameter for the better prediction of asphalt mastic stiffening	528-541
Khalid, Nur Hafizah A. / Hussin, Mohd Warid / Ismail, Mohammad / Basar, Norazah / Ismail, Mohamed A. / Lee, Han-Seung / Mohamed, Azman	Evaluation of effectiveness of methyl methacrylate as retarder additive in polymer concrete	449-456
Yoo, Sung-Won / Ryu, Gum-Sung / Choo, Jinkyo F.	Evaluation of the effects of high-volume fly ash on the flexural behavior of reinforced concrete beams	1132-1144
Wang, Boxin / Man, Teng / Jin, Henan	Expansive and mechanical properties of textile reinforced self-stressing concrete	1042-1050
Ning, Xiliang / Ding, Yining / Zhang, Fasheng / Zhang, Yulin	Experimental study and prediction model for flexural behavior of reinforced SCC beam containing steel fibers	644-653
Cui, Hongzhi / Tang, Waiching / Liu, Wei / Dong, Zhijun / Xing, Feng	Experimental study on effects of CO2 concentrations on concrete carbonation and diffusion mechanisms	522-527
Gao, Yingli / Zou, Chao	Experimental study on segregation resistance of nanoSiO2 fly ash lightweight aggregate concrete	64-69
Chen, Dar Hao / Won, Moon	Field performance with state-of-the-art patching repair material	393-403
Osmancikli, Gökhan / Bayraktar, Alemdar / Türker, Temel / Uçak, Senay / Mosallam, Ayman	Finite element model calibration of precast structures using ambient vibrations	10-21
Das, Sumanta / Hendrix, Alyson / Stone, David / Neithalath, Narayanan	Flexural fracture response of a novel iron carbonate matrix – Glass fiber composite and its comparison to Portland cement-based composites	360-370
Karadelis, John N. / Lin, Yougui	Flexural strengths and fibre efficiency of steel-fibre-reinforced, roller-compacted, polymer modified concrete	498-505
Li, Qixuan / Cai, Liangcai / Fu, Yawei / Wang, Haifu / Zou, Yong	Fracture properties and response surface methodology model of alkali-slag concrete under freeze–thaw cycles	620-626
Kumar, Shailendra / Choubey, Rajendra Kumar	Further observations on the three-parameter R-curve of concrete-like quasi-brittle materials	857-868
Karaca, Zeki / Hacımustafaoğlu, Ramazan / Gökçe, Mehmedi Vehbi	Grain properties, grain-boundary interactions and their effects on the characteristics of marbles used as building stones	166-171
Li, Ming / Yang, Yujia / Liu, Meng / Guo, Xiaoyang / Zhou, Song	Hybrid effect of calcium carbonate whisker and carbon fiber on the mechanical properties and microstructure of oil well cement	995-1002
Liu, Jun / Li, Yao / Ouyang, Peng / Yang, Yuanquan	Hydration of the silica fume-Portland cement binary system at lower temperature	919-925
McCarthy, Leslie Myers / Gudimettla, Jagan M. / Crawford, Gary L. / Guercio, Maria C. / Allen, Douglas	Impacts of variability in coefficient of thermal expansion on predicted concrete pavement performance	711-719
Hu, Jing / Qian, Zhendong / Wang, Dawei / Oeser, Markus	Influence of aggregate particles on mastic and air-voids in asphalt concrete	1-9
Zhang, Shaohua / Liu, Laibao / Tan, Kefeng / Zhang, Lihua / Tang, Kaijing	Influence of burning temperature and cooling methods on strength of high carbon ferrochrome slag lightweight aggregate	1180-1187
Carballosa, P. / García Calvo, J. L. / Revuelta, D. / Sánchez, J. J. / Gutiérrez, J. P.	Influence of cement and expansive additive types in the performance of self-stressing and self-compacting concretes for structural elements	223-229
Wang, Xiao-Hui / Chen, Bing / Gao, Yang / Wang, Jing / Gao, Lu	Influence of external loading and loading type on corrosion behavior of RC beams with epoxy-coated reinforcements	746-765
Hwang, Chao-Lung / Huynh, Trong-Phuoc	Investigation into the use of unground rice husk ash to produce eco-friendly construction bricks	335-341
Yavuz, Ali B. / Akal, Cüneyt / Türk, Necdet / Çolak, Mümtaz / Tanyu, Burak F.	Investigation of discrepancy between tuff used as building stones in historical and modern buildings in western Turkey	439-448
Jiang, Lihong / Xue, Xiao / Zhang, Weidong / Yang, Jingna / Zhang, Hongqiang / Li, Yanwen / Zhang, Rongpu / Zhang, Ziying / Xu, Lijin / Qu, Jian / Song, Jianrong / Qin, Jie	The investigation of factors affecting the water impermeability of inorganic sodium silicate-based concrete sealers	729-736
Li, Linglin / Huang, Xiaoming / Han, Ding / Dong, Mansheng / Zhu, Dayong	Investigation of rutting behavior of asphalt pavement in long and steep section of mountainous highway with overloading	635-643
Ginouse, Nicolas / Jolin, Marc	Investigation of spray pattern in shotcrete applications	966-972
Zhang, Yingbo / Wang, Weibiao / Zhu, Yue	Investigation on conditions of hydraulic fracturing for asphalt concrete used as impervious core in dams	775-781
Martinez-Arguelles, Gilberto / Giustozzi, Filippo / Crispino, Maurizio / Flintsch, Gerardo W.	Laboratory investigation on mechanical performance of cold foamed bitumen mixes: Bitumen source, foaming additive, fiber-reinforcement and cement effect	241-248
San-Antonio-González, Alicia / Merino, Mercedes del Río / Viñas Arrebola, Carmen / Villoria-Sáez, Paola	Lightweight material made with gypsum and extruded polystyrene waste with enhanced thermal behaviour	57-63
Weng, Meng-Chia / Wu, Min-Hao / Lin, Chiou-Liang / Syue, Da-Ken / Hung, Ching	Long-term mechanical stability of cemented incineration bottom ash	551-557
Anil, Özgür / Kantar, Erkan / Yılmaz, M. Cem	Low velocity impact behavior of RC slabs with different support types	1078-1088
Kwan, A. K. H. / Ling, S. K.	Lowering paste volume of SCC through aggregate proportioning to reduce carbon footprint	584-594
Tian, Yaogang / Shi, Shuaifeng / Jia, Kan / Hu, Shuguang	Mechanical and dynamic properties of high strength concrete modified with lightweight aggregates presaturated polymer emulsion	1151-1156
Binici, Hanifi / Aksogan, Orhan / Sevinc, Ahmet H. / Cinpolat, Erdi	Mechanical and radioactivity shielding performances of mortars made with cement, sand and egg shells	1145-1150
Wu, Jian / Bai, Guo-liang / Zhao, Hui-yi / Li, Xue	Mechanical and thermal tests of an innovative environment-friendly hollow block as self-insulation wall materials	342-349
Martin, Antonia / Pastor, Jose Y. / Palomo, Angel / Fernández Jiménez, Ana	Mechanical behaviour at high temperature of alkali-activated aluminosilicates (geopolymers)	1188-1196
Yang, Teng-Chun / Wu, Tung-Lin / Hung, Ke-Chang / Chen, Yong-Long / Wu, Jyh-Horng	Mechanical properties and extended creep behavior of bamboo fiber reinforced recycled poly(lactic acid) composites using the time–temperature superposition principle	558-563
Ma, Qianmin / Guo, Rongxin / Zhao, Zhiman / Lin, Zhiwei / He, Kecheng	Mechanical properties of concrete at high temperature—A review	371-383
Moustafa, Ayman / ElGawady, Mohamed A.	Mechanical properties of high strength concrete with scrap tire rubber	249-256
Zhang, Xihong / Hao, Hong / Shi, Yanchao / Cui, Jian	The mechanical properties of Polyvinyl Butyral (PVB) at high strain rates	404-415
Feng, Peng / Meng, Xinmiao / Chen, Jian-Fei / Ye, Lieping	Mechanical properties of structures 3D printed with cementitious powders	486-497
Azhari, Fatemeh / Heidarpour, Amin / Zhao, Xiao-Ling / Hutchinson, Christopher R.	Mechanical properties of ultra-high strength (Grade 1200) steel tubes under cooling phase of a fire: An experimental investigation	841-850
Isla, F. / Luccioni, B. / Ruano, G. / Torrijos, M. C. / Morea, F. / Giaccio, G. / Zerbino, R.	Mechanical response of fiber reinforced concrete overlays over asphalt concrete substrate: Experimental results and numerical simulation	1022-1033
Han, Jianguo / Wang, Kejin / Shi, Jiyao / Wang, Yue	Mechanism of triethanolamine on Portland cement hydration process and microstructure characteristics	457-462
Blasco-López, F. J. / Alejandre, F. J. / Flores-Alés, V.	Methodology for characterising microlayers in historical plasterwork	463-470
Heikal, Mohamed / Al-Duaij, O. K. / Ibrahim, N. S.	Microstructure of composite cements containing blast-furnace slag and silica nano-particles subjected to elevated thermally treatment temperature	1067-1077
Guan, Junfeng / Li, Qingbin / Wu, Zhimin / Zhao, Shunbo / Dong, Wei / Zhou, Shaowu	Minimum specimen size for fracture parameters of site-casting dam concrete	973-982
Pilvar, Amirreza / Ramezanianpour, Ali Akbar / Rajaie, Hossein	New method development for evaluation concrete chloride ion permeability	790-797
Arifuzzaman, Md / Kim, Ho Sung	Novel mechanical behaviour of perlite/sodium silicate composites	230-240
Colangiuli, Donato / Calia, Angela / Bianco, Nadia	Novel multifunctional coatings with photocatalytic and hydrophobic properties for the preservation of the stone building heritage	189-196
Güllü, Hamza	On the viscous behavior of cement mixtures with clay, sand, lime and bottom ash for jet grouting	891-910
Moini, Mohamadreza / Flores-Vivian, Ismael / Amirjanov, Adil / Sobolev, Konstantin	The optimization of aggregate blends for sustainable low cement concrete	627-634
Vázquez-Rivera, Natalia I. / Soto-Pérez, Linoshka / St John, Juliana N. / Molina-Bas, Omar I. / Hwang, Sangchul S.	Optimization of pervious concrete containing fly ash and iron oxide nanoparticles and its application for phosphorus removal	22-28
Jo, Minju / Soto, Linoshka / Arocho, Marleisa / St John, Juliana / Hwang, Sangchul	Optimum mix design of fly ash geopolymer paste and its use in pervious concrete for removal of fecal coliforms and phosphorus in water	1097-1104
Pei, Huafu / Li, Zongjin / Zhang, Jinrui / Wang, Qian	Performance investigations of reinforced magnesium phosphate concrete beams under accelerated corrosion conditions by multi techniques	989-994
Nanukuttan, S. V. / Basheer, P. A. M. / McCarter, W. J. / Tang, L. / Holmes, N. / Chrisp, T. M. / Starrs, G. / Magee, B.	The performance of concrete exposed to marine environments: Predictive modelling and use of laboratory/on site test methods	831-840
Ko, Ming-Sheng / Chen, Hsing-Yen / Lyu, Syuan-Jhih / Wang, Tai-Tien / Ueng, Tzuu-Hsing	Permeation characteristics and impact factors of geopolymers made of kaolin	301-308
Ali, Shaban Ismael Albrka / Ismail, Amiruddin / Yusoff, Nur Izzi Md. / Karim, Mohamed Rehan / Al-Mansob, Ramez A. / Alhamali, Dhawo Ibrahim	Physical and rheological properties of acrylate–styrene–acrylonitrile modified asphalt cement	326-334
Yoo, Doo-Yeol / Yoon, Young-Soo / Banthia, Nemkumar	Predicting the post-cracking behavior of normal- and high-strength steel-fiber-reinforced concrete beams	477-485
Zhao, Chunying / Yan, Yun / Hu, Zhihua / Li, Liping / Fan, Xiaozheng	Preparation and characterization of granular silica aerogel/polyisocyanurate rigid foam composites	309-316
Da Silva, Filipe Bravo / De Belie, Nele / Boon, Nico / Verstraete, Willy	Production of non-axenic ureolytic spores for self-healing concrete applications	1034-1041
Sun, Yihan / Wu, Shaopeng / Liu, Quantao / Xiao, Yue	Promoting the dispersion of LDHs powder in bitumen with pre-dispersion and microwave heating	416-426
Ge, Zhi / Yue, Hongya / Sun, Renjuan	Properties of mortar produced with recycled clay brick aggregate and PET	851-856
Bilir, Turhan / Gencel, Osman / Topçu, İlker Bekir	Properties of mortars with fly ash as fine aggregate	782-789
Yeih, Weichung / Fu, Tun Chi / Chang, Jiang Jhy / Huang, Ran	Properties of pervious concrete made with air-cooling electric arc furnace slag as aggregates	737-745
Ata, Alaa A. / Salem, Tarek N. / Elkhawas, Nadia M.	Properties of soil–bentonite–cement bypass mixture for cutoff walls	950-956
Gesoǧlu, Mehmet / Güneyisi, Erhan / Nahhab, Ali H. / Yazıcı, Halit	Properties of ultra-high performance fiber reinforced cementitious composites made with gypsum-contaminated aggregates and cured at normal and elevated temperatures	427-438
Kazemian, Ali / Gholizadeh Vayghan, Asghar / Rajabipour, Farshad	Quantitative assessment of parameters that affect strength development in alkali activated fly ash binders	869-876
Štrukelj, Andrej / Ber, Boštjan / Premrov, Miroslav	Racking resistance of timber-glass wall elements using different types of adhesives	130-143
Rashad, Alaa M.	Recycled cathode ray tube and liquid crystal display glass as fine aggregate replacement in cementitious materials	1236-1248
Napoli, Annalisa / Realfonzo, Roberto	Reinforced concrete beams strengthened with SRP/SRG systems: Experimental investigation	654-677
Kim, Naeun / Shin, Yeong Soo / Choi, Eunsoo / Kim, Hee Sun	Relationships between interfacial shear stresses and moment capacities of RC beams strengthened with various types of FRP sheets	1170-1179
Mao, L. / Barnett, S. J. / Tyas, A. / Warren, J. / Schleyer, G. K. / Zaini, S. S.	Response of small scale ultra high performance fibre reinforced concrete slabs to blast loading	822-830
Achal, Varenyam / Mukherjee, Abhijit	A review of microbial precipitation for sustainable construction	1224-1235
Coelho, Mário R. F. / Sena-Cruz, José M. / Neves, Luis A. C.	A review on the bond behavior of FRP NSM systems in concrete	1157-1169
Król, Jan B. / Kowalski, Karol J. / Radziszewski, Piotr / Sarnowski, Michał	Rheological behaviour of n-alkane modified bitumen in aspect of Warm Mix Asphalt technology	703-710
Xu, Ouming / Cong, Lin / Xiao, Feipeng / Amirkhanian, Serji N.	Rheology investigation of combined binders from various polymers with GTR under a short term aging process	1012-1021
Kim, B. / Boyd, A. J. / Kim, H.-S. / Lee, S.-H.	Steel and synthetic types of fibre reinforced concrete exposed to chemical erosion	720-728
Hussein, Luaay / Amleh, Lamya	Structural behavior of ultra-high performance fiber reinforced concrete-normal strength concrete or high strength concrete composite members	1105-1116
Castillo, Daniel / Caro, Silvia / Darabi, Masoud / Masad, Eyad	Studying the effect of microstructural properties on the mechanical degradation of asphalt mixtures	70-83
Zeng, Wenbo / Wu, Shaopeng / Wen, Jin / Chen, Zongwu	The temperature effects in aging index of asphalt during UV aging process	1125-1131
Cheng, Jianlian / Qian, Xudong	Temperature-dependent viscoelastic model for asphalt concrete using discrete rheological representation	157-165
Chen, Yu / Feng, Ran / Wang, Chaoyang	Tests of bare and concrete-filled CHS T-joints with concave chord under axial compression	144-156
Sadique, Monower / Al-Nageim, Hassan / Stopps, Karl	To investigate the fundamental causes of utility air voids content failures in asphalt layers to achieve Specification for the Reinstatement of Openings in Highways (SROH) compliant performance	595-607
Wattez, Thomas / Duhart-Barone, Anne / Lorente, Sylvie	Tritium through-diffusion test in non steady state: Can the effective diffusion coefficient be determined?	121-129
Cacciotti, Riccardo / Petráňová, Veronika / Frankeová, Dita	Understanding the 16th century coastal watchtowers: Material characterisation of Torre Gregoriana (Italy)	608-619
Sun, Yiren / Huang, Baoshan / Chen, Jingyun	A unified procedure for rapidly determining asphalt concrete discrete relaxation and retardation spectra	35-48
Yin, Shi / Tuladhar, Rabin / Shi, Feng / Combe, Mark / Collister, Tony / Sivakugan, Nagaratnam	Use of macro plastic fibres in concrete: A review	180-188
Chen, Zongwu / Wu, Shaopeng / Wen, Jin / Zhao, Meiling / Yi, Mingwei / Wan, Jiuming	Utilization of gneiss coarse aggregate and steel slag fine aggregate in asphalt mixture	911-918
Ercikdi, Bayram / Külekci, Gökhan / Yılmaz, Tekin	Utilization of granulated marble wastes and waste bricks as mineral admixture in cemented paste backfill of sulphide-rich tailings	573-583

About this
data sheet
IssueID
22562
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - September 2015

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - September 2015

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.