Construction and Building Materials - September 2015

Erschienen:	September 2015

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Yu, Zhiwu / Chen, Ying / Liu, Peng / Wang, Weilun	Accelerated simulation of chloride ingress into concrete under drying–wetting alternation condition chloride environment	205-213
Park, Hyeon Ku / Kim, Hang	Acoustic insulation performance of improved airtight windows	542-550
Thomas, Robert J. / Peethamparan, Sulapha	Alkali-activated concrete: Engineering properties and stress–strain behavior	49-56
Sánchez-Beitia, S. / Crespo de Antonio, M. / Acuña, L.	Applicability of the Hole-Drilling procedure for stresses quantification in timber bending elements in service	798-805
Wang, Shifeng / Wang, Qiang / Wu, Xiaoyu / Zhang, Yong	Asphalt modified by thermoplastic elastomer based on recycled rubber	678-684
Tondolo, F.	Bond behaviour with reinforcement corrosion	926-932
Lagier, F. / Massicotte, B. / Charron, J.-P.	Bond strength of tension lap splice specimens in UHPFRC	84-94
Zhang, Yuge / Sun, Yifan / Xu, Ke / Yuan, Zuanru / Zhang, Jing / Chen, Ru / Xie, Hongfeng / Cheng, Rongshi	Brucite modified epoxy mortar binders: Flame retardancy, thermal and mechanical characterization	1089-1096
Abdalqader, Ahmed F. / Jin, Fei / Al-Tabbaa, Abir	Characterisation of reactive magnesia and sodium carbonate-activated fly ash/slag paste blends	506-513
Huang, Weidong / Tang, Naipeng	Characterizing SBS modified asphalt with sulfur using multiple stress creep recovery test	514-521
Walubita, Lubinda F. / Faruk, Abu N. M. / Zhang, Jun / Hu, Xiaodi	Characterizing the cracking and fracture properties of geosynthetic interlayer reinforced HMA samples using the Overlay Tester (OT)	695-702
Cuadri, A. A. / Partal, P. / Ahmad, N. / Grenfell, J. / Airey, G.	Chemically modified bitumens with enhanced rheology and adhesion properties to siliceous aggregates	766-774
Chen, Yuxuan / Shui, Zhonghe / Chen, Wei / Chen, Guowei	Chloride binding of synthetic Ca–Al–NO3 LDHs in hardened cement paste	1051-1058
Simčič, Tina / Pejovnik, Stane / De Schutter, Geert / Bosiljkov, Violeta Bokan	Chloride ion penetration into fly ash modified concrete during wetting–drying cycles	1216-1223
Ahmed, M. U. / Rahman, A. / Islam, M. R. / Tarefder, R. A.	Combined effect of asphalt concrete cross-anisotropy and temperature variation on pavement stress–strain under dynamic loading	685-694
Zheng, Mulian / Han, Lili / Wang, Fei / Mi, Haichen / Li, Yifeng / He, Litao	Comparison and analysis on heat reflective coating for asphalt pavement based on cooling effect and anti-skid performance	1197-1205
Balczár, Ida / Korim, Tamás / Dobrádi, Annamária	Correlation of strength to apparent porosity of geopolymers – Understanding through variations of setting time	983-988
Liu, Ming / Cheng, Xuequn / Li, Xiaogang / Jin, Zhu / Liu, Haixia	Corrosion behavior of Cr modified HRB400 steel rebar in simulated concrete pore solution	884-890
Bautista, A. / Paredes, E. C. / Velasco, F. / Alvarez, S. M.	Corrugated stainless steels embedded in mortar for 9years: Corrosion results of non-carbonated, chloride-contaminated samples	350-359
Oliveira, Miguel José / Ribeiro, António Bettencourt / Branco, Fernando Garrido	Curing effect in the shrinkage of a lower strength self-compacting concrete	1206-1215
Farnam, Yaghoob / Wiese, Andrew / Bentz, Dale / Davis, Jeffrey / Weiss, Jason	Damage development in cementitious materials exposed to magnesium chloride deicing salt	384-392
Qiao, Yunfeng / Sun, Wei / Jiang, Jinyang	Damage process of concrete subjected to coupling fatigue load and freeze/thaw cycles	806-811
Huang, Puxi / Chang, Wen-Shao / Ansell, Martin P. / Chew, Y. M. John / Shea, Andy	Density distribution profile for internodes and nodes of Phyllostachys edulis (Moso bamboo) by computer tomography scanning	197-204
Stefanidou, Maria / Pachta, Vasiliki / Papayianni, Ioanna	Design and testing of artificial stone for the restoration of stone elements in monuments and historic buildings	957-965
Salih, Moslih Amer / Farzadnia, Nima / Abang Ali, Abang Abdullah / Demirboğa, Ramazan	Development of high strength alkali activated binder using palm oil fuel ash and GGBS at ambient temperature	289-300
Fanghui, Han / Qiang, Wang / Jingjing, Feng	The differences among the roles of ground fly ash in the paste, mortar and concrete	172-179
Zhang, Wenyan / Hama, Yukio / Na, Seung Hyun	Drying shrinkage and microstructure characteristics of mortar incorporating ground granulated blast furnace slag and shrinkage reducing admixture	267-277
Ganesan, N. / Abraham, Ruby / Deepa Raj, S.	Durability characteristics of steel fibre reinforced geopolymer concrete	471-476
Hossain, M. M. / Karim, M. R. / Hossain, M. K. / Islam, M. N. / Zain, M. F. M.	Durability of mortar and concrete containing alkali-activated binder with pozzolans: A review	95-109
Ali, M. Shafqat / Ji, Chenhui / Mirza, M. Saeed	Durable design of reinforced concrete elements against corrosion	317-325
Meier, Markus R. / Sarigaphuti, Manasit / Sainamthip, Prinya / Plank, Johann	Early hydration of Portland cement studied under microgravity conditions	877-883
Li, Wei / Zhu, Xiaobin / Hong, Jinxiang / She, Wei / Wang, Penggang / Zuo, Wenqiang	Effect of anionic emulsifier on cement hydration and its interaction mechanism	1003-1011
Mostofinejad, Davood / Khozaei, Kamyar	Effect of GM patterns on ductility and debonding control of FRP sheets in RC strengthened beams	110-120
Li, Guowei / Wu, Jiantao / Ge, Wanming	Effect of loading rate and chemical corrosion on the mechanical properties of large diameter glass/basalt-glass FRP bars	1059-1066
Han, Dongyeop / Ferron, Raissa Douglas	Effect of mixing method on microstructure and rheology of cement paste	278-288
Coo, Michael / Pheeraphan, Thanakorn	Effect of sand, fly ash, and coarse aggregate gradation on preplaced aggregate concrete studied through factorial design	812-821
Lim, Nor Hasanah Abdul Shukor / Ismail, Mohamed A. / Lee, Han Seung / Hussin, Mohd Warid / Sam, Abdul Rahman Mohd. / Samadi, Mostafa	The effects of high volume nano palm oil fuel ash on microstructure properties and hydration temperature of mortar	29-34
Jiang, Guang / Rong, Zhidan / Sun, Wei	Effects of metakaolin on mechanical properties, pore structure and hydration heat of mortars at 0.17 w/b ratio	564-572
Zhou, Haijun / Lu, Jinlong / Xv, Xi / Dong, Biqing / Xing, Feng	Effects of stirrup corrosion on bond–slip performance of reinforcing steel in concrete: An experimental study	257-266
Xiao, Jianzhuang / Li, Long / Shen, Luming / Yuan, Junqiang	Effects of strain rate on mechanical behavior of modeled recycled aggregate concrete under uniaxial compression	214-222
Dong, Biqin / Qiu, Qiwen / Xiang, Jiaqi / Huang, Canjie / Sun, Hongfang / Xing, Feng / Liu, Wei	Electrochemical impedance interpretation of the carbonation behavior for fly ash–slag–cement materials	933-942
Sharma, Vandna / Vinayak, Hemant K. / Marwaha, Bhanu M.	Enhancing compressive strength of soil using natural fibers	943-949
Mohd Hasan, Mohd Rosli / You, Zhanping	Estimation of cumulative energy demand and green house gas emissions of ethanol foamed WMA using life cycle assessment analysis	1117-1124
Makowska, Michalina / Pellinen, Terhi	Etchable iron content (FETCH) proposed as the missing parameter for the better prediction of asphalt mastic stiffening	528-541
Khalid, Nur Hafizah A. / Hussin, Mohd Warid / Ismail, Mohammad / Basar, Norazah / Ismail, Mohamed A. / Lee, Han-Seung / Mohamed, Azman	Evaluation of effectiveness of methyl methacrylate as retarder additive in polymer concrete	449-456
Yoo, Sung-Won / Ryu, Gum-Sung / Choo, Jinkyo F.	Evaluation of the effects of high-volume fly ash on the flexural behavior of reinforced concrete beams	1132-1144
Wang, Boxin / Man, Teng / Jin, Henan	Expansive and mechanical properties of textile reinforced self-stressing concrete	1042-1050
Ning, Xiliang / Ding, Yining / Zhang, Fasheng / Zhang, Yulin	Experimental study and prediction model for flexural behavior of reinforced SCC beam containing steel fibers	644-653
Cui, Hongzhi / Tang, Waiching / Liu, Wei / Dong, Zhijun / Xing, Feng	Experimental study on effects of CO2 concentrations on concrete carbonation and diffusion mechanisms	522-527
Gao, Yingli / Zou, Chao	Experimental study on segregation resistance of nanoSiO2 fly ash lightweight aggregate concrete	64-69
Chen, Dar Hao / Won, Moon	Field performance with state-of-the-art patching repair material	393-403
Osmancikli, Gökhan / Bayraktar, Alemdar / Türker, Temel / Uçak, Senay / Mosallam, Ayman	Finite element model calibration of precast structures using ambient vibrations	10-21
Das, Sumanta / Hendrix, Alyson / Stone, David / Neithalath, Narayanan	Flexural fracture response of a novel iron carbonate matrix – Glass fiber composite and its comparison to Portland cement-based composites	360-370
Karadelis, John N. / Lin, Yougui	Flexural strengths and fibre efficiency of steel-fibre-reinforced, roller-compacted, polymer modified concrete	498-505
Li, Qixuan / Cai, Liangcai / Fu, Yawei / Wang, Haifu / Zou, Yong	Fracture properties and response surface methodology model of alkali-slag concrete under freeze–thaw cycles	620-626
Kumar, Shailendra / Choubey, Rajendra Kumar	Further observations on the three-parameter R-curve of concrete-like quasi-brittle materials	857-868
Karaca, Zeki / Hacımustafaoğlu, Ramazan / Gökçe, Mehmedi Vehbi	Grain properties, grain-boundary interactions and their effects on the characteristics of marbles used as building stones	166-171
Li, Ming / Yang, Yujia / Liu, Meng / Guo, Xiaoyang / Zhou, Song	Hybrid effect of calcium carbonate whisker and carbon fiber on the mechanical properties and microstructure of oil well cement	995-1002
Liu, Jun / Li, Yao / Ouyang, Peng / Yang, Yuanquan	Hydration of the silica fume-Portland cement binary system at lower temperature	919-925
McCarthy, Leslie Myers / Gudimettla, Jagan M. / Crawford, Gary L. / Guercio, Maria C. / Allen, Douglas	Impacts of variability in coefficient of thermal expansion on predicted concrete pavement performance	711-719
Hu, Jing / Qian, Zhendong / Wang, Dawei / Oeser, Markus	Influence of aggregate particles on mastic and air-voids in asphalt concrete	1-9
Zhang, Shaohua / Liu, Laibao / Tan, Kefeng / Zhang, Lihua / Tang, Kaijing	Influence of burning temperature and cooling methods on strength of high carbon ferrochrome slag lightweight aggregate	1180-1187
Carballosa, P. / García Calvo, J. L. / Revuelta, D. / Sánchez, J. J. / Gutiérrez, J. P.	Influence of cement and expansive additive types in the performance of self-stressing and self-compacting concretes for structural elements	223-229
Wang, Xiao-Hui / Chen, Bing / Gao, Yang / Wang, Jing / Gao, Lu	Influence of external loading and loading type on corrosion behavior of RC beams with epoxy-coated reinforcements	746-765
Hwang, Chao-Lung / Huynh, Trong-Phuoc	Investigation into the use of unground rice husk ash to produce eco-friendly construction bricks	335-341
Yavuz, Ali B. / Akal, Cüneyt / Türk, Necdet / Çolak, Mümtaz / Tanyu, Burak F.	Investigation of discrepancy between tuff used as building stones in historical and modern buildings in western Turkey	439-448
Jiang, Lihong / Xue, Xiao / Zhang, Weidong / Yang, Jingna / Zhang, Hongqiang / Li, Yanwen / Zhang, Rongpu / Zhang, Ziying / Xu, Lijin / Qu, Jian / Song, Jianrong / Qin, Jie	The investigation of factors affecting the water impermeability of inorganic sodium silicate-based concrete sealers	729-736
Li, Linglin / Huang, Xiaoming / Han, Ding / Dong, Mansheng / Zhu, Dayong	Investigation of rutting behavior of asphalt pavement in long and steep section of mountainous highway with overloading	635-643
Ginouse, Nicolas / Jolin, Marc	Investigation of spray pattern in shotcrete applications	966-972
Zhang, Yingbo / Wang, Weibiao / Zhu, Yue	Investigation on conditions of hydraulic fracturing for asphalt concrete used as impervious core in dams	775-781
Martinez-Arguelles, Gilberto / Giustozzi, Filippo / Crispino, Maurizio / Flintsch, Gerardo W.	Laboratory investigation on mechanical performance of cold foamed bitumen mixes: Bitumen source, foaming additive, fiber-reinforcement and cement effect	241-248
San-Antonio-González, Alicia / Merino, Mercedes del Río / Viñas Arrebola, Carmen / Villoria-Sáez, Paola	Lightweight material made with gypsum and extruded polystyrene waste with enhanced thermal behaviour	57-63
Weng, Meng-Chia / Wu, Min-Hao / Lin, Chiou-Liang / Syue, Da-Ken / Hung, Ching	Long-term mechanical stability of cemented incineration bottom ash	551-557
Anil, Özgür / Kantar, Erkan / Yılmaz, M. Cem	Low velocity impact behavior of RC slabs with different support types	1078-1088
Kwan, A. K. H. / Ling, S. K.	Lowering paste volume of SCC through aggregate proportioning to reduce carbon footprint	584-594
Tian, Yaogang / Shi, Shuaifeng / Jia, Kan / Hu, Shuguang	Mechanical and dynamic properties of high strength concrete modified with lightweight aggregates presaturated polymer emulsion	1151-1156
Binici, Hanifi / Aksogan, Orhan / Sevinc, Ahmet H. / Cinpolat, Erdi	Mechanical and radioactivity shielding performances of mortars made with cement, sand and egg shells	1145-1150
Wu, Jian / Bai, Guo-liang / Zhao, Hui-yi / Li, Xue	Mechanical and thermal tests of an innovative environment-friendly hollow block as self-insulation wall materials	342-349
Martin, Antonia / Pastor, Jose Y. / Palomo, Angel / Fernández Jiménez, Ana	Mechanical behaviour at high temperature of alkali-activated aluminosilicates (geopolymers)	1188-1196
Yang, Teng-Chun / Wu, Tung-Lin / Hung, Ke-Chang / Chen, Yong-Long / Wu, Jyh-Horng	Mechanical properties and extended creep behavior of bamboo fiber reinforced recycled poly(lactic acid) composites using the time–temperature superposition principle	558-563
Ma, Qianmin / Guo, Rongxin / Zhao, Zhiman / Lin, Zhiwei / He, Kecheng	Mechanical properties of concrete at high temperature—A review	371-383
Moustafa, Ayman / ElGawady, Mohamed A.	Mechanical properties of high strength concrete with scrap tire rubber	249-256
Zhang, Xihong / Hao, Hong / Shi, Yanchao / Cui, Jian	The mechanical properties of Polyvinyl Butyral (PVB) at high strain rates	404-415
Feng, Peng / Meng, Xinmiao / Chen, Jian-Fei / Ye, Lieping	Mechanical properties of structures 3D printed with cementitious powders	486-497
Azhari, Fatemeh / Heidarpour, Amin / Zhao, Xiao-Ling / Hutchinson, Christopher R.	Mechanical properties of ultra-high strength (Grade 1200) steel tubes under cooling phase of a fire: An experimental investigation	841-850
Isla, F. / Luccioni, B. / Ruano, G. / Torrijos, M. C. / Morea, F. / Giaccio, G. / Zerbino, R.	Mechanical response of fiber reinforced concrete overlays over asphalt concrete substrate: Experimental results and numerical simulation	1022-1033
Han, Jianguo / Wang, Kejin / Shi, Jiyao / Wang, Yue	Mechanism of triethanolamine on Portland cement hydration process and microstructure characteristics	457-462
Blasco-López, F. J. / Alejandre, F. J. / Flores-Alés, V.	Methodology for characterising microlayers in historical plasterwork	463-470
Heikal, Mohamed / Al-Duaij, O. K. / Ibrahim, N. S.	Microstructure of composite cements containing blast-furnace slag and silica nano-particles subjected to elevated thermally treatment temperature	1067-1077
Guan, Junfeng / Li, Qingbin / Wu, Zhimin / Zhao, Shunbo / Dong, Wei / Zhou, Shaowu	Minimum specimen size for fracture parameters of site-casting dam concrete	973-982
Pilvar, Amirreza / Ramezanianpour, Ali Akbar / Rajaie, Hossein	New method development for evaluation concrete chloride ion permeability	790-797
Arifuzzaman, Md / Kim, Ho Sung	Novel mechanical behaviour of perlite/sodium silicate composites	230-240
Colangiuli, Donato / Calia, Angela / Bianco, Nadia	Novel multifunctional coatings with photocatalytic and hydrophobic properties for the preservation of the stone building heritage	189-196
Güllü, Hamza	On the viscous behavior of cement mixtures with clay, sand, lime and bottom ash for jet grouting	891-910
Moini, Mohamadreza / Flores-Vivian, Ismael / Amirjanov, Adil / Sobolev, Konstantin	The optimization of aggregate blends for sustainable low cement concrete	627-634
Vázquez-Rivera, Natalia I. / Soto-Pérez, Linoshka / St John, Juliana N. / Molina-Bas, Omar I. / Hwang, Sangchul S.	Optimization of pervious concrete containing fly ash and iron oxide nanoparticles and its application for phosphorus removal	22-28
Jo, Minju / Soto, Linoshka / Arocho, Marleisa / St John, Juliana / Hwang, Sangchul	Optimum mix design of fly ash geopolymer paste and its use in pervious concrete for removal of fecal coliforms and phosphorus in water	1097-1104
Pei, Huafu / Li, Zongjin / Zhang, Jinrui / Wang, Qian	Performance investigations of reinforced magnesium phosphate concrete beams under accelerated corrosion conditions by multi techniques	989-994
Nanukuttan, S. V. / Basheer, P. A. M. / McCarter, W. J. / Tang, L. / Holmes, N. / Chrisp, T. M. / Starrs, G. / Magee, B.	The performance of concrete exposed to marine environments: Predictive modelling and use of laboratory/on site test methods	831-840
Ko, Ming-Sheng / Chen, Hsing-Yen / Lyu, Syuan-Jhih / Wang, Tai-Tien / Ueng, Tzuu-Hsing	Permeation characteristics and impact factors of geopolymers made of kaolin	301-308
Ali, Shaban Ismael Albrka / Ismail, Amiruddin / Yusoff, Nur Izzi Md. / Karim, Mohamed Rehan / Al-Mansob, Ramez A. / Alhamali, Dhawo Ibrahim	Physical and rheological properties of acrylate–styrene–acrylonitrile modified asphalt cement	326-334
Yoo, Doo-Yeol / Yoon, Young-Soo / Banthia, Nemkumar	Predicting the post-cracking behavior of normal- and high-strength steel-fiber-reinforced concrete beams	477-485
Zhao, Chunying / Yan, Yun / Hu, Zhihua / Li, Liping / Fan, Xiaozheng	Preparation and characterization of granular silica aerogel/polyisocyanurate rigid foam composites	309-316
Da Silva, Filipe Bravo / De Belie, Nele / Boon, Nico / Verstraete, Willy	Production of non-axenic ureolytic spores for self-healing concrete applications	1034-1041
Sun, Yihan / Wu, Shaopeng / Liu, Quantao / Xiao, Yue	Promoting the dispersion of LDHs powder in bitumen with pre-dispersion and microwave heating	416-426
Ge, Zhi / Yue, Hongya / Sun, Renjuan	Properties of mortar produced with recycled clay brick aggregate and PET	851-856
Bilir, Turhan / Gencel, Osman / Topçu, İlker Bekir	Properties of mortars with fly ash as fine aggregate	782-789
Yeih, Weichung / Fu, Tun Chi / Chang, Jiang Jhy / Huang, Ran	Properties of pervious concrete made with air-cooling electric arc furnace slag as aggregates	737-745
Ata, Alaa A. / Salem, Tarek N. / Elkhawas, Nadia M.	Properties of soil–bentonite–cement bypass mixture for cutoff walls	950-956
Gesoǧlu, Mehmet / Güneyisi, Erhan / Nahhab, Ali H. / Yazıcı, Halit	Properties of ultra-high performance fiber reinforced cementitious composites made with gypsum-contaminated aggregates and cured at normal and elevated temperatures	427-438
Kazemian, Ali / Gholizadeh Vayghan, Asghar / Rajabipour, Farshad	Quantitative assessment of parameters that affect strength development in alkali activated fly ash binders	869-876
Štrukelj, Andrej / Ber, Boštjan / Premrov, Miroslav	Racking resistance of timber-glass wall elements using different types of adhesives	130-143
Rashad, Alaa M.	Recycled cathode ray tube and liquid crystal display glass as fine aggregate replacement in cementitious materials	1236-1248
Napoli, Annalisa / Realfonzo, Roberto	Reinforced concrete beams strengthened with SRP/SRG systems: Experimental investigation	654-677
Kim, Naeun / Shin, Yeong Soo / Choi, Eunsoo / Kim, Hee Sun	Relationships between interfacial shear stresses and moment capacities of RC beams strengthened with various types of FRP sheets	1170-1179
Mao, L. / Barnett, S. J. / Tyas, A. / Warren, J. / Schleyer, G. K. / Zaini, S. S.	Response of small scale ultra high performance fibre reinforced concrete slabs to blast loading	822-830
Achal, Varenyam / Mukherjee, Abhijit	A review of microbial precipitation for sustainable construction	1224-1235
Coelho, Mário R. F. / Sena-Cruz, José M. / Neves, Luis A. C.	A review on the bond behavior of FRP NSM systems in concrete	1157-1169
Król, Jan B. / Kowalski, Karol J. / Radziszewski, Piotr / Sarnowski, Michał	Rheological behaviour of n-alkane modified bitumen in aspect of Warm Mix Asphalt technology	703-710
Xu, Ouming / Cong, Lin / Xiao, Feipeng / Amirkhanian, Serji N.	Rheology investigation of combined binders from various polymers with GTR under a short term aging process	1012-1021
Kim, B. / Boyd, A. J. / Kim, H.-S. / Lee, S.-H.	Steel and synthetic types of fibre reinforced concrete exposed to chemical erosion	720-728
Hussein, Luaay / Amleh, Lamya	Structural behavior of ultra-high performance fiber reinforced concrete-normal strength concrete or high strength concrete composite members	1105-1116
Castillo, Daniel / Caro, Silvia / Darabi, Masoud / Masad, Eyad	Studying the effect of microstructural properties on the mechanical degradation of asphalt mixtures	70-83
Zeng, Wenbo / Wu, Shaopeng / Wen, Jin / Chen, Zongwu	The temperature effects in aging index of asphalt during UV aging process	1125-1131
Cheng, Jianlian / Qian, Xudong	Temperature-dependent viscoelastic model for asphalt concrete using discrete rheological representation	157-165
Chen, Yu / Feng, Ran / Wang, Chaoyang	Tests of bare and concrete-filled CHS T-joints with concave chord under axial compression	144-156
Sadique, Monower / Al-Nageim, Hassan / Stopps, Karl	To investigate the fundamental causes of utility air voids content failures in asphalt layers to achieve Specification for the Reinstatement of Openings in Highways (SROH) compliant performance	595-607
Wattez, Thomas / Duhart-Barone, Anne / Lorente, Sylvie	Tritium through-diffusion test in non steady state: Can the effective diffusion coefficient be determined?	121-129
Cacciotti, Riccardo / Petráňová, Veronika / Frankeová, Dita	Understanding the 16th century coastal watchtowers: Material characterisation of Torre Gregoriana (Italy)	608-619
Sun, Yiren / Huang, Baoshan / Chen, Jingyun	A unified procedure for rapidly determining asphalt concrete discrete relaxation and retardation spectra	35-48
Yin, Shi / Tuladhar, Rabin / Shi, Feng / Combe, Mark / Collister, Tony / Sivakugan, Nagaratnam	Use of macro plastic fibres in concrete: A review	180-188
Chen, Zongwu / Wu, Shaopeng / Wen, Jin / Zhao, Meiling / Yi, Mingwei / Wan, Jiuming	Utilization of gneiss coarse aggregate and steel slag fine aggregate in asphalt mixture	911-918
Ercikdi, Bayram / Külekci, Gökhan / Yılmaz, Tekin	Utilization of granulated marble wastes and waste bricks as mineral admixture in cemented paste backfill of sulphide-rich tailings	573-583

Über diese
Datenseite
IssueID
22562
Veröffentlicht am:
15.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - September 2015

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - September 2015

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.