Construction and Building Materials - September 2015

Published:	September 2015

Articles in this Issue

Author(s)	Title	Page(s)
Almeida, João A. P. P. / Pereira, Eduardo B. / Barros, Joaquim A. O.	Assessment of overlay masonry strengthening system under in-plane monotonic and cyclic loading using the diagonal tensile test	851-865
Moraes, J. C. B. / Akasaki, J. L. / Melges, J. L. P. / Monzó, J. / Borrachero, M. V. / Soriano, L. / Payá, J. / Tashima, M. M.	Assessment of sugar cane straw ash (SCSA) as pozzolanic material in blended Portland cement: Microstructural characterization of pastes and mechanical strength of mortars	670-677
Zhao, Huiling / Yu, Haitao / Yuan, Yong / Zhu, Hongbo	Blast mitigation effect of the foamed cement-base sacrificial cladding for tunnel structures	710-718
Foglar, Marek / Hajek, Radek / Kovar, Martin / Stoller, Jiri	Blast performance of RC panels with waste steel fibers	536-546
Desnerck, Pieter / Lees, Janet M. / Morley, Chris T.	Bond behaviour of reinforcing bars in cracked concrete	126-136
Song, Xiaobin / Wu, Yajie / Gu, Xianglin / Chen, Chao	Bond behaviour of reinforcing steel bars in early age concrete	209-217
Horgnies, Matthieu / Darque-Ceretti, Evelyne / Gueit, Eléonore / Aucouturier, Marc	Characterisation of the variations of tint and the adhesion of pigments onto the surface of mortar	380-386
Choi, Soo-Kyung / Kudoh, Rumi / Koga, Junko / Mikami, Takamasa / Yokoyama, Yutaka / Takahashi, Hiroki / Ono, Hidenori	A comparative evaluation of floor slip resistance test methods	737-745
Jalal, Mostafa / Pouladkhan, Alireza / Harandi, Omid Fasihi / Jafari, Davoud	Comparative study on effects of Class F fly ash, nano silica and silica fume on properties of high performance self compacting concrete	90-104
Caprolu, Giuseppe / Girhammar, Ulf Arne / Källsner, Bo	Comparison of models and tests on bottom rails in timber frame shear walls experiencing uplift	148-163
Mo, Kim Hung / Alengaram, U. Johnson / Jumaat, Mohd Zamin	Compressive behaviour of lightweight oil palm shell concrete incorporating slag	263-269
Fonseca, Fernando S. / Godfrey, Robert C. / Siggard, Kurt	Compressive strength of masonry grout containing high amounts of class F fly ash and ground granulated blast furnace slag	719-727
Pasetto, Marco / Baldo, Nicola	Computational analysis of the creep behaviour of bituminous mixtures	784-790
Breccolotti, Marco / Bonfigli, Massimo Federico / D'Alessandro, Antonella / Materazzi, Annibale Luigi	Constitutive modeling of plain concrete subjected to cyclic uniaxial compressive loading	172-180
Shi, Jianzhe / Wang, Xin / Wu, Zhishen / Zhu, Zhongguo	Creep behavior enhancement of a basalt fiber-reinforced polymer tendon	750-757
Kalfat, R. / Al-Mahaidi, R.	Development of a hybrid anchor to improve the bond performance of multiple plies of FRP laminates bonded to concrete	280-289
Nour, Ali / Massicotte, Bruno / de Montaignac, Renaud / Charron, Jean-Philippe	Development of an inverse analysis procedure for the characterisation of softening diagrams for FRC beams and panels	35-44
Adamson, M. / Razmjoo, A. / Poursaee, A.	Durability of concrete incorporating crushed brick as coarse aggregate	426-432
Bautista, Emil G. / Flickinger, Justin / Saha, Rajan / Flores-Vivian, Ismael / Faheem, Ahmed F. / Sobolev, Konstantin	Effect of Coal Combustion Products on high temperature performance of asphalt mastics	572-578
Neupane, Kamal / Sriravindrarajah, Rasiah / Baweja, Daksh / Chalmers, Des	Effect of curing on the compressive strength development in structural grades of geocement concrete	241-248
Salih, Moslih Amer / Farzadnia, Nima / Abang Ali, Abang Abdullah / Demirboğa, Ramazan	Effect of different curing temperatures on alkali activated palm oil fuel ash paste	116-125
Acharya, Prasanna K. / Patro, Sanjaya K.	Effect of lime and ferrochrome ash (FA) as partial replacement of cement on strength, ultrasonic pulse velocity and permeability of concrete	448-457
Li, Xinxin / Wu, Zhimin / Zheng, Jianjun / Dong, Wei	Effect of loading rate on the bond behavior of plain round bars in concrete under lateral pressure	826-836
Mehrinejad Khotbehsara, Mojdeh / Mohseni, Ehsan / Yazdi, Mohammad Ali / Sarker, Prabir / Ranjbar, Malek Mohammad	Effect of nano-CuO and fly ash on the properties of self-compacting mortar	758-766
Kuo, Wen-Ten / Shu, Chun-Ya	Effect of particle size and curing temperature on expansion reaction in electric arc furnace oxidizing slag aggregate concrete	488-493
Meagher, Thomas / Shanahan, Natallia / Buidens, Daniel / Riding, Kyle A. / Zayed, A.	Effects of chloride and chloride-free accelerators combined with typical admixtures on the early-age cracking risk of concrete repair slabs	270-279
Mohebby, Behbood / Saei, Amir Mootab	Effects of geographical directions and climatological parameters on natural weathering of fir wood	684-690
Eiras, J. N. / Popovics, J. S. / Borrachero, M. V. / Monzó, J. / Payá, J.	The effects of moisture and micro-structural modifications in drying mortars on vibration-based NDT methods	565-571
Yadollahi, Mehrzad Mohabbi / Benli, Ahmet / Demirboğa, Ramazan	The effects of silica modulus and aging on compressive strength of pumice-based geopolymer composites	767-774
Huang, Yu / Niu, Jian-lei	Energy and visual performance of the silica aerogel glazing system in commercial buildings of Hong Kong	57-72
Shojaei Baghini, Mojtaba / Ismail, Amiruddin / Bin Karim, Mohamed Rehan	Evaluation of cement-treated mixtures with slow setting bitumen emulsion as base course material for road pavements	323-336
Gorhan, Gokhan	The evaluation with anova of the effect of lime admixture and thermal cure time on fly ash paste activated with sodium silicate solution	228-234
Rashid, Khuram / Ueda, Tamon / Zhang, Dawei / Miyaguchi, Katsushi / Nakai, Hiroshi	Experimental and analytical investigations on the behavior of interface between concrete and polymer cement mortar under hygrothermal conditions	414-425
Abdesssemed, M. / Kenai, S. / Bali, A.	Experimental and numerical analysis of the behavior of an airport pavement reinforced by geogrids	547-554
Miličević, Ivana / Bjegovic, Dubravka / Siddique, Rafat	Experimental research of concrete floor blocks with crushed bricks and tiles aggregate	775-783
Fan, Shijian / Chen, Bing	Experimental research of water stability of magnesium alumina phosphate cements mortar	164-171
Martinelli, Enzo / Caggiano, Antonio / Xargay, Hernán	An experimental study on the post-cracking behaviour of Hybrid Industrial/Recycled Steel Fibre-Reinforced Concrete	290-298
Mermerdaş, Kasım / Arbili, Mohamed Moafak	Explicit formulation of drying and autogenous shrinkage of concretes with binary and ternary blends of silica fume and fly ash	371-379
Speranzini, E. / Agnetti, S.	Flexural performance of hybrid beams made of glass and pultruded GFRP	249-262
Barluenga, Gonzalo / Palomar, Irene / Puentes, Javier	Hardened properties and microstructure of SCC with mineral additions	728-736
Khaliq, Wasim / Khan, Hammad Anis	High temperature material properties of calcium aluminate cement concrete	475-487
Sánchez Fajardo, V. M. / Torres, M. E. / Moreno, A. J.	Hydraulic and hygrothermal properties of lightweight concrete blocks with basaltic lapilli as aggregate	398-407
Jiang, Demin / Cui, Suping / Xu, Feng / Tuo, Tianfu	Impact of leaf fibre modification methods on compatibility between leaf fibres and cement-based materials	502-512
Ongel, Aybike / Hugener, Martin	Impact of rejuvenators on aging properties of bitumen	467-474
Davis, Chelsea / Castorena, Cassie	Implications of physico–chemical interactions in asphalt mastics on asphalt microstructure	83-89
Temiz, Hüseyin / Kantarcı, Fatih / Emin İnceer, M.	Influence of blast-furnace slag on behaviour of dolomite used as a raw material of MgO-type expansive agent	528-535
Cetrangolo, Gonzalo / Rodríguez, Soledad / Rodríguez, Aitor / Baño, Vanesa	Influence of boundary conditions on the natural frequencies and damping of timber beams of sweet chestnut	613-619
Nikolić, Violeta / Komljenović, Miroslav / Baščarević, Zvezdana / Marjanović, Nataša / Miladinović, Zoran / Petrović, Rada	The influence of fly ash characteristics and reaction conditions on strength and structure of geopolymers	361-370
Liang, Han-Hsi / Li, Jie-Long	The influence of hydration and swelling properties of gypsum on the preparation of lightweight brick using water supply reservoir sediment	691-700
Kashani, Mohammad M. / Barmi, Aneeka K. / Malinova, Viktoria S.	Influence of inelastic buckling on low-cycle fatigue degradation of reinforcing bars	644-655
Igarashi, Go / Maruyama, Ippei / Nishioka, Yukiko / Yoshida, Hidekazu	Influence of mineral composition of siliceous rock on its volume change	701-709
Calvet, V. / Valcuende, M. / Benlloch, J. / Cánoves, J.	Influence of moderate temperatures on the bond between carbon fibre reinforced polymer bars (CFRP) and concrete	589-604
Ghafari, Ehsan / Arezoumandi, Mahdi / Costa, Hugo / Júlio, Eduardo	Influence of nano-silica addition on durability of UHPC	181-188
Jang, J. G. / Kim, H. J. / Park, S. M. / Lee, H. K.	The influence of sodium hydrogen carbonate on the hydration of cement	746-749
López-Gayarre, F. / Blanco Viñuela, R. / Serrano-López, M. A. / López-Colina, C.	Influence of the water variation on the mechanical properties of concrete manufactured with recycled mixed aggregates for pre-stressed components	844-850
Dongyu, Xu / Xin, Cheng / Shifeng, Huang	Investigation of inorganic fillers on properties of 2–2 connectivity cement/polymer based piezoelectric composites	678-683
Corinaldesi, Valeria / Donnini, Jacopo / Nardinocchi, Alessandro	Lightweight plasters containing plastic waste for sustainable and energy-efficient building	337-345
Sadati, Seyedhamed / Arezoumandi, Mahdi / Shekarchi, Mohammad	Long-term performance of concrete surface coatings in soil exposure of marine environments	656-663
Afroughsabet, Vahid / Ozbakkaloglu, Togay	Mechanical and durability properties of high-strength concrete containing steel and polypropylene fibers	73-82
Iglesias-Campos, Manuel Ángel / Prada Pérez, José Luis / García Fortes, Salvador	Microblasting cleaning for façade repair and maintenance: Selecting technical parameters for treatment efficiency	605-612
Lanzón, Marcos / Cnudde, Veerle / De Kock, Tim / Dewanckele, Jan	Microstructural examination and potential application of rendering mortars made of tire rubber and expanded polystyrene wastes	817-825
Ayaz, Yaşar / Kocamaz, Adnan Fatih / Karakoç, Mehmet Burhan	Modeling of compressive strength and UPV of high-volume mineral-admixtured concrete using rule-based M5 rule and tree model M5P classifiers	235-240
Carette, Jérôme / Staquet, Stéphanie	Monitoring the setting process of mortars by ultrasonic P and S-wave transmission velocity measurement	196-208
Silva, B. A. / Ferreira Pinto, A. P. / Gomes, A.	Natural hydraulic lime versus cement for blended lime mortars for restoration works	346-360
Luo, Sang / Yang, Xu	Performance evaluation of high-elastic asphalt mixture containing deicing agent Mafilon	494-501
Norambuena-Contreras, J. / Gutierrez Aguilar, V. / Gonzalez-Torre, I.	Physical and mechanical behaviour of a fibre-reinforced rubber membrane with self-healing purposes via microwave heating	45-56
Hwang, Jun Pil / Kim, Moonil / Ann, Ki Yong	Porosity generation arising from steel fibre in concrete	433-436
Yang, Yuming / Qian, Zhendong / Song, Xin	A pothole patching material for epoxy asphalt pavement on steel bridges: Fatigue test and numerical analysis	299-305
Behnood, Ali / Olek, Jan / Glinicki, Michal A.	Predicting modulus elasticity of recycled aggregate concrete using M5′ model tree algorithm	137-147
Un, C. H. / Sanjayan, J. G. / San Nicolas, R. / van Deventer, J. S. J.	Predictions of long-term deflection of geopolymer concrete beams	10-19
Posi, Patcharapol / Ridtirud, Charoenchai / Ekvong, Chatchavan / Chammanee, Duangchai / Janthowong, Khuanchai / Chindaprasirt, Prinya	Properties of lightweight high calcium fly ash geopolymer concretes containing recycled packaging foam	408-413
Lertwattanaruk, Pusit / Suntijitto, Anchisa	Properties of natural fiber cement materials containing coconut coir and oil palm fibers for residential building applications	664-669
Omer, Sharmarke Abdi / Demirboğa, Ramazan / Khushefati, Waleed H.	Relationship between compressive strength and UPV of GGBFS based geopolymer mortars exposed to elevated temperatures	189-195
Kaya, A. / Dawood, M. / Gencturk, B.	Repair of corroded and buckled short steel columns using concrete-filled GFRP jackets	20-27
Kostrzanowska-Siedlarz, Aleksandra / Gołaszewski, Jacek	Rheological properties and the air content in fresh concrete for self compacting high performance concrete	555-564
Unluer, C. / Al-Tabbaa, A.	The role of brucite, ground granulated blastfurnace slag, and magnesium silicates in the carbonation and performance of MgO cements	629-643
Dębska, Bernardeta / Lichołai, Lech	The selected mechanical properties of epoxy mortar containing PET waste	579-588
Kim, Yungon / Ghannoum, Wassim M. / Jirsa, James O.	Shear behavior of full-scale reinforced concrete T-beams strengthened with CFRP strips and anchors	1-9
Guo, Qinglin / Bian, Yanshan / Li, Lili / Jiao, Yubo / Tao, Jinglin / Xiang, Chengxiu	Stereological estimation of aggregate gradation using digital image of asphalt mixture	458-466
Ariffin, Nur Farhayu / Hussin, Mohd Warid / Sam, Abdul Rahman Mohd / Bhutta, Muhammad Aamer Rafique / Abd. Khalid, Nur Hafizah / Mirza, Jahangir	Strength properties and molecular composition of epoxy-modified mortars	315-322
Bui, Phuong Trinh / Ogawa, Yuko / Nakarai, Kenichiro / Kawai, Kenji	A study on pozzolanic reaction of fly ash cement paste activated by an injection of alkali solution	28-34
Zhu, Lihua / Dai, Jun / Bai, Guoliang / Zhang, Fengjian	Study on thermal properties of recycled aggregate concrete and recycled concrete blocks	620-628
Chabannes, Morgan / Garcia-Diaz, Eric / Clerc, Laurent / Bénézet, Jean-Charles	Studying the hardening and mechanical performances of rice husk and hemp-based building materials cured under natural and accelerated carbonation	105-115
Magalhães, Margareth da Silva / Filho, Romildo Dias Toledo / de Moraes Rego Fairbairn, Eduardo	Thermal stability of PVA fiber strain hardening cement-based composites	437-447
Ghazijahani, Tohid Ghanbari / Jiao, Hui / Holloway, Damien	Timber filled CFRP jacketed circular steel tubes under axial compression	791-799
Huang, Dongsheng / Bian, Yuling / Huang, Dongmei / Zhou, Aiping / Sheng, Baolu	An ultimate-state-based-model for inelastic analysis of intermediate slenderness PSB columns under eccentrically compressive load	306-314
Suksiripattanapong, Cherdsak / Horpibulsuk, Suksun / Boongrasan, Surachet / Udomchai, Artit / Chinkulkijniwat, Avirut / Arulrajah, Arul	Unit weight, strength and microstructure of a water treatment sludge–fly ash lightweight cellular geopolymer	807-816
Delinière, R. / Aubert, J. E. / Husson, B.	Use of Carbonated Residual Brines as main component of filling grout	800-806
Cicek, Tayfun / Çinçin, Yasin	Use of fly ash in production of light-weight building bricks	521-527
Zhang, Jun / Walubita, Lubinda F. / Faruk, Abu N. M. / Karki, Pravat / Simate, Geoffrey S.	Use of the MSCR test to characterize the asphalt binder properties relative to HMA rutting performance – A laboratory study	218-227
Gastaldini, A. L. G. / Hengen, M. F. / Gastaldini, M. C. C. / do Amaral, F. D. / Antolini, M. B. / Coletto, T.	The use of water treatment plant sludge ash as a mineral addition	513-520
Sáez-de-Guinoa Vilaplana, Aitana / Ferreira, Víctor J. / López-Sabirón, Ana M. / Aranda-Usón, Alfonso / Lausín-González, Cristina / Berganza-Conde, Cecilia / Ferreira, Germán	Utilization of Ladle Furnace slag from a steelwork for laboratory scale production of Portland cement	837-843
Stamatopoulos, Haris / Malo, Kjell Arne	Withdrawal capacity of threaded rods embedded in timber elements	387-397

About this
data sheet
IssueID
22560
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - September 2015

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - September 2015

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.