Construction and Building Materials - septembre 2015

Publié:	septembre 2015

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Almeida, João A. P. P. / Pereira, Eduardo B. / Barros, Joaquim A. O.	Assessment of overlay masonry strengthening system under in-plane monotonic and cyclic loading using the diagonal tensile test	851-865
Moraes, J. C. B. / Akasaki, J. L. / Melges, J. L. P. / Monzó, J. / Borrachero, M. V. / Soriano, L. / Payá, J. / Tashima, M. M.	Assessment of sugar cane straw ash (SCSA) as pozzolanic material in blended Portland cement: Microstructural characterization of pastes and mechanical strength of mortars	670-677
Zhao, Huiling / Yu, Haitao / Yuan, Yong / Zhu, Hongbo	Blast mitigation effect of the foamed cement-base sacrificial cladding for tunnel structures	710-718
Foglar, Marek / Hajek, Radek / Kovar, Martin / Stoller, Jiri	Blast performance of RC panels with waste steel fibers	536-546
Desnerck, Pieter / Lees, Janet M. / Morley, Chris T.	Bond behaviour of reinforcing bars in cracked concrete	126-136
Song, Xiaobin / Wu, Yajie / Gu, Xianglin / Chen, Chao	Bond behaviour of reinforcing steel bars in early age concrete	209-217
Horgnies, Matthieu / Darque-Ceretti, Evelyne / Gueit, Eléonore / Aucouturier, Marc	Characterisation of the variations of tint and the adhesion of pigments onto the surface of mortar	380-386
Choi, Soo-Kyung / Kudoh, Rumi / Koga, Junko / Mikami, Takamasa / Yokoyama, Yutaka / Takahashi, Hiroki / Ono, Hidenori	A comparative evaluation of floor slip resistance test methods	737-745
Jalal, Mostafa / Pouladkhan, Alireza / Harandi, Omid Fasihi / Jafari, Davoud	Comparative study on effects of Class F fly ash, nano silica and silica fume on properties of high performance self compacting concrete	90-104
Caprolu, Giuseppe / Girhammar, Ulf Arne / Källsner, Bo	Comparison of models and tests on bottom rails in timber frame shear walls experiencing uplift	148-163
Mo, Kim Hung / Alengaram, U. Johnson / Jumaat, Mohd Zamin	Compressive behaviour of lightweight oil palm shell concrete incorporating slag	263-269
Fonseca, Fernando S. / Godfrey, Robert C. / Siggard, Kurt	Compressive strength of masonry grout containing high amounts of class F fly ash and ground granulated blast furnace slag	719-727
Pasetto, Marco / Baldo, Nicola	Computational analysis of the creep behaviour of bituminous mixtures	784-790
Breccolotti, Marco / Bonfigli, Massimo Federico / D'Alessandro, Antonella / Materazzi, Annibale Luigi	Constitutive modeling of plain concrete subjected to cyclic uniaxial compressive loading	172-180
Shi, Jianzhe / Wang, Xin / Wu, Zhishen / Zhu, Zhongguo	Creep behavior enhancement of a basalt fiber-reinforced polymer tendon	750-757
Kalfat, R. / Al-Mahaidi, R.	Development of a hybrid anchor to improve the bond performance of multiple plies of FRP laminates bonded to concrete	280-289
Nour, Ali / Massicotte, Bruno / de Montaignac, Renaud / Charron, Jean-Philippe	Development of an inverse analysis procedure for the characterisation of softening diagrams for FRC beams and panels	35-44
Adamson, M. / Razmjoo, A. / Poursaee, A.	Durability of concrete incorporating crushed brick as coarse aggregate	426-432
Bautista, Emil G. / Flickinger, Justin / Saha, Rajan / Flores-Vivian, Ismael / Faheem, Ahmed F. / Sobolev, Konstantin	Effect of Coal Combustion Products on high temperature performance of asphalt mastics	572-578
Neupane, Kamal / Sriravindrarajah, Rasiah / Baweja, Daksh / Chalmers, Des	Effect of curing on the compressive strength development in structural grades of geocement concrete	241-248
Salih, Moslih Amer / Farzadnia, Nima / Abang Ali, Abang Abdullah / Demirboğa, Ramazan	Effect of different curing temperatures on alkali activated palm oil fuel ash paste	116-125
Acharya, Prasanna K. / Patro, Sanjaya K.	Effect of lime and ferrochrome ash (FA) as partial replacement of cement on strength, ultrasonic pulse velocity and permeability of concrete	448-457
Li, Xinxin / Wu, Zhimin / Zheng, Jianjun / Dong, Wei	Effect of loading rate on the bond behavior of plain round bars in concrete under lateral pressure	826-836
Mehrinejad Khotbehsara, Mojdeh / Mohseni, Ehsan / Yazdi, Mohammad Ali / Sarker, Prabir / Ranjbar, Malek Mohammad	Effect of nano-CuO and fly ash on the properties of self-compacting mortar	758-766
Kuo, Wen-Ten / Shu, Chun-Ya	Effect of particle size and curing temperature on expansion reaction in electric arc furnace oxidizing slag aggregate concrete	488-493
Meagher, Thomas / Shanahan, Natallia / Buidens, Daniel / Riding, Kyle A. / Zayed, A.	Effects of chloride and chloride-free accelerators combined with typical admixtures on the early-age cracking risk of concrete repair slabs	270-279
Mohebby, Behbood / Saei, Amir Mootab	Effects of geographical directions and climatological parameters on natural weathering of fir wood	684-690
Eiras, J. N. / Popovics, J. S. / Borrachero, M. V. / Monzó, J. / Payá, J.	The effects of moisture and micro-structural modifications in drying mortars on vibration-based NDT methods	565-571
Yadollahi, Mehrzad Mohabbi / Benli, Ahmet / Demirboğa, Ramazan	The effects of silica modulus and aging on compressive strength of pumice-based geopolymer composites	767-774
Huang, Yu / Niu, Jian-lei	Energy and visual performance of the silica aerogel glazing system in commercial buildings of Hong Kong	57-72
Shojaei Baghini, Mojtaba / Ismail, Amiruddin / Bin Karim, Mohamed Rehan	Evaluation of cement-treated mixtures with slow setting bitumen emulsion as base course material for road pavements	323-336
Gorhan, Gokhan	The evaluation with anova of the effect of lime admixture and thermal cure time on fly ash paste activated with sodium silicate solution	228-234
Rashid, Khuram / Ueda, Tamon / Zhang, Dawei / Miyaguchi, Katsushi / Nakai, Hiroshi	Experimental and analytical investigations on the behavior of interface between concrete and polymer cement mortar under hygrothermal conditions	414-425
Abdesssemed, M. / Kenai, S. / Bali, A.	Experimental and numerical analysis of the behavior of an airport pavement reinforced by geogrids	547-554
Miličević, Ivana / Bjegovic, Dubravka / Siddique, Rafat	Experimental research of concrete floor blocks with crushed bricks and tiles aggregate	775-783
Fan, Shijian / Chen, Bing	Experimental research of water stability of magnesium alumina phosphate cements mortar	164-171
Martinelli, Enzo / Caggiano, Antonio / Xargay, Hernán	An experimental study on the post-cracking behaviour of Hybrid Industrial/Recycled Steel Fibre-Reinforced Concrete	290-298
Mermerdaş, Kasım / Arbili, Mohamed Moafak	Explicit formulation of drying and autogenous shrinkage of concretes with binary and ternary blends of silica fume and fly ash	371-379
Speranzini, E. / Agnetti, S.	Flexural performance of hybrid beams made of glass and pultruded GFRP	249-262
Barluenga, Gonzalo / Palomar, Irene / Puentes, Javier	Hardened properties and microstructure of SCC with mineral additions	728-736
Khaliq, Wasim / Khan, Hammad Anis	High temperature material properties of calcium aluminate cement concrete	475-487
Sánchez Fajardo, V. M. / Torres, M. E. / Moreno, A. J.	Hydraulic and hygrothermal properties of lightweight concrete blocks with basaltic lapilli as aggregate	398-407
Jiang, Demin / Cui, Suping / Xu, Feng / Tuo, Tianfu	Impact of leaf fibre modification methods on compatibility between leaf fibres and cement-based materials	502-512
Ongel, Aybike / Hugener, Martin	Impact of rejuvenators on aging properties of bitumen	467-474
Davis, Chelsea / Castorena, Cassie	Implications of physico–chemical interactions in asphalt mastics on asphalt microstructure	83-89
Temiz, Hüseyin / Kantarcı, Fatih / Emin İnceer, M.	Influence of blast-furnace slag on behaviour of dolomite used as a raw material of MgO-type expansive agent	528-535
Cetrangolo, Gonzalo / Rodríguez, Soledad / Rodríguez, Aitor / Baño, Vanesa	Influence of boundary conditions on the natural frequencies and damping of timber beams of sweet chestnut	613-619
Nikolić, Violeta / Komljenović, Miroslav / Baščarević, Zvezdana / Marjanović, Nataša / Miladinović, Zoran / Petrović, Rada	The influence of fly ash characteristics and reaction conditions on strength and structure of geopolymers	361-370
Liang, Han-Hsi / Li, Jie-Long	The influence of hydration and swelling properties of gypsum on the preparation of lightweight brick using water supply reservoir sediment	691-700
Kashani, Mohammad M. / Barmi, Aneeka K. / Malinova, Viktoria S.	Influence of inelastic buckling on low-cycle fatigue degradation of reinforcing bars	644-655
Igarashi, Go / Maruyama, Ippei / Nishioka, Yukiko / Yoshida, Hidekazu	Influence of mineral composition of siliceous rock on its volume change	701-709
Calvet, V. / Valcuende, M. / Benlloch, J. / Cánoves, J.	Influence of moderate temperatures on the bond between carbon fibre reinforced polymer bars (CFRP) and concrete	589-604
Ghafari, Ehsan / Arezoumandi, Mahdi / Costa, Hugo / Júlio, Eduardo	Influence of nano-silica addition on durability of UHPC	181-188
Jang, J. G. / Kim, H. J. / Park, S. M. / Lee, H. K.	The influence of sodium hydrogen carbonate on the hydration of cement	746-749
López-Gayarre, F. / Blanco Viñuela, R. / Serrano-López, M. A. / López-Colina, C.	Influence of the water variation on the mechanical properties of concrete manufactured with recycled mixed aggregates for pre-stressed components	844-850
Dongyu, Xu / Xin, Cheng / Shifeng, Huang	Investigation of inorganic fillers on properties of 2–2 connectivity cement/polymer based piezoelectric composites	678-683
Corinaldesi, Valeria / Donnini, Jacopo / Nardinocchi, Alessandro	Lightweight plasters containing plastic waste for sustainable and energy-efficient building	337-345
Sadati, Seyedhamed / Arezoumandi, Mahdi / Shekarchi, Mohammad	Long-term performance of concrete surface coatings in soil exposure of marine environments	656-663
Afroughsabet, Vahid / Ozbakkaloglu, Togay	Mechanical and durability properties of high-strength concrete containing steel and polypropylene fibers	73-82
Iglesias-Campos, Manuel Ángel / Prada Pérez, José Luis / García Fortes, Salvador	Microblasting cleaning for façade repair and maintenance: Selecting technical parameters for treatment efficiency	605-612
Lanzón, Marcos / Cnudde, Veerle / De Kock, Tim / Dewanckele, Jan	Microstructural examination and potential application of rendering mortars made of tire rubber and expanded polystyrene wastes	817-825
Ayaz, Yaşar / Kocamaz, Adnan Fatih / Karakoç, Mehmet Burhan	Modeling of compressive strength and UPV of high-volume mineral-admixtured concrete using rule-based M5 rule and tree model M5P classifiers	235-240
Carette, Jérôme / Staquet, Stéphanie	Monitoring the setting process of mortars by ultrasonic P and S-wave transmission velocity measurement	196-208
Silva, B. A. / Ferreira Pinto, A. P. / Gomes, A.	Natural hydraulic lime versus cement for blended lime mortars for restoration works	346-360
Luo, Sang / Yang, Xu	Performance evaluation of high-elastic asphalt mixture containing deicing agent Mafilon	494-501
Norambuena-Contreras, J. / Gutierrez Aguilar, V. / Gonzalez-Torre, I.	Physical and mechanical behaviour of a fibre-reinforced rubber membrane with self-healing purposes via microwave heating	45-56
Hwang, Jun Pil / Kim, Moonil / Ann, Ki Yong	Porosity generation arising from steel fibre in concrete	433-436
Yang, Yuming / Qian, Zhendong / Song, Xin	A pothole patching material for epoxy asphalt pavement on steel bridges: Fatigue test and numerical analysis	299-305
Behnood, Ali / Olek, Jan / Glinicki, Michal A.	Predicting modulus elasticity of recycled aggregate concrete using M5′ model tree algorithm	137-147
Un, C. H. / Sanjayan, J. G. / San Nicolas, R. / van Deventer, J. S. J.	Predictions of long-term deflection of geopolymer concrete beams	10-19
Posi, Patcharapol / Ridtirud, Charoenchai / Ekvong, Chatchavan / Chammanee, Duangchai / Janthowong, Khuanchai / Chindaprasirt, Prinya	Properties of lightweight high calcium fly ash geopolymer concretes containing recycled packaging foam	408-413
Lertwattanaruk, Pusit / Suntijitto, Anchisa	Properties of natural fiber cement materials containing coconut coir and oil palm fibers for residential building applications	664-669
Omer, Sharmarke Abdi / Demirboğa, Ramazan / Khushefati, Waleed H.	Relationship between compressive strength and UPV of GGBFS based geopolymer mortars exposed to elevated temperatures	189-195
Kaya, A. / Dawood, M. / Gencturk, B.	Repair of corroded and buckled short steel columns using concrete-filled GFRP jackets	20-27
Kostrzanowska-Siedlarz, Aleksandra / Gołaszewski, Jacek	Rheological properties and the air content in fresh concrete for self compacting high performance concrete	555-564
Unluer, C. / Al-Tabbaa, A.	The role of brucite, ground granulated blastfurnace slag, and magnesium silicates in the carbonation and performance of MgO cements	629-643
Dębska, Bernardeta / Lichołai, Lech	The selected mechanical properties of epoxy mortar containing PET waste	579-588
Kim, Yungon / Ghannoum, Wassim M. / Jirsa, James O.	Shear behavior of full-scale reinforced concrete T-beams strengthened with CFRP strips and anchors	1-9
Guo, Qinglin / Bian, Yanshan / Li, Lili / Jiao, Yubo / Tao, Jinglin / Xiang, Chengxiu	Stereological estimation of aggregate gradation using digital image of asphalt mixture	458-466
Ariffin, Nur Farhayu / Hussin, Mohd Warid / Sam, Abdul Rahman Mohd / Bhutta, Muhammad Aamer Rafique / Abd. Khalid, Nur Hafizah / Mirza, Jahangir	Strength properties and molecular composition of epoxy-modified mortars	315-322
Bui, Phuong Trinh / Ogawa, Yuko / Nakarai, Kenichiro / Kawai, Kenji	A study on pozzolanic reaction of fly ash cement paste activated by an injection of alkali solution	28-34
Zhu, Lihua / Dai, Jun / Bai, Guoliang / Zhang, Fengjian	Study on thermal properties of recycled aggregate concrete and recycled concrete blocks	620-628
Chabannes, Morgan / Garcia-Diaz, Eric / Clerc, Laurent / Bénézet, Jean-Charles	Studying the hardening and mechanical performances of rice husk and hemp-based building materials cured under natural and accelerated carbonation	105-115
Magalhães, Margareth da Silva / Filho, Romildo Dias Toledo / de Moraes Rego Fairbairn, Eduardo	Thermal stability of PVA fiber strain hardening cement-based composites	437-447
Ghazijahani, Tohid Ghanbari / Jiao, Hui / Holloway, Damien	Timber filled CFRP jacketed circular steel tubes under axial compression	791-799
Huang, Dongsheng / Bian, Yuling / Huang, Dongmei / Zhou, Aiping / Sheng, Baolu	An ultimate-state-based-model for inelastic analysis of intermediate slenderness PSB columns under eccentrically compressive load	306-314
Suksiripattanapong, Cherdsak / Horpibulsuk, Suksun / Boongrasan, Surachet / Udomchai, Artit / Chinkulkijniwat, Avirut / Arulrajah, Arul	Unit weight, strength and microstructure of a water treatment sludge–fly ash lightweight cellular geopolymer	807-816
Delinière, R. / Aubert, J. E. / Husson, B.	Use of Carbonated Residual Brines as main component of filling grout	800-806
Cicek, Tayfun / Çinçin, Yasin	Use of fly ash in production of light-weight building bricks	521-527
Zhang, Jun / Walubita, Lubinda F. / Faruk, Abu N. M. / Karki, Pravat / Simate, Geoffrey S.	Use of the MSCR test to characterize the asphalt binder properties relative to HMA rutting performance – A laboratory study	218-227
Gastaldini, A. L. G. / Hengen, M. F. / Gastaldini, M. C. C. / do Amaral, F. D. / Antolini, M. B. / Coletto, T.	The use of water treatment plant sludge ash as a mineral addition	513-520
Sáez-de-Guinoa Vilaplana, Aitana / Ferreira, Víctor J. / López-Sabirón, Ana M. / Aranda-Usón, Alfonso / Lausín-González, Cristina / Berganza-Conde, Cecilia / Ferreira, Germán	Utilization of Ladle Furnace slag from a steelwork for laboratory scale production of Portland cement	837-843
Stamatopoulos, Haris / Malo, Kjell Arne	Withdrawal capacity of threaded rods embedded in timber elements	387-397

Informations
sur cette fiche
IssueID
22560
Publié(e) le:
15.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - septembre 2015

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - septembre 2015

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.