Construction and Building Materials - February 2015

Published:	February 2015

Articles in this Issue

Author(s)	Title	Page(s)
Poletti, Elisa / Vasconcelos, Graça / Jorge, Marco	Application of near surface mounted (NSM) strengthening technique to traditional timber frame walls	34-50
Karagöl, Fatma / Demirboğa, Ramazan / Khushefati, Waleed H.	Behavior of fresh and hardened concretes with antifreeze admixtures in deep-freeze low temperatures and exterior winter conditions	388-395
Adegoloye, G. / Beaucour, A.-L. / Ortola, S. / Noumowe, A.	Concretes made of EAF slag and AOD slag aggregates from stainless steel process: Mechanical properties and durability	313-321
Libessart, Laurent / De Caro, Pascale / Djelal, Chafika / Dubois, Isabelle	Correlation between adhesion energy of release agents on the formwork and demoulding performances	130-139
Caprili, Silvia / Salvatore, Walter	Cyclic behaviour of uncorroded and corroded steel reinforcing bars	168-186
de Rosario, Iván / Elhaddad, Farid / Pan, Aldara / Benavides, Rosa / Rivas, Teresa / Mosquera, María J.	Effectiveness of a novel consolidant on granite: Laboratory and in situ results	140-149
Garrido, Mário / Correia, João R. / Keller, Thomas	Effects of elevated temperature on the shear response of PET and PUR foams used in composite sandwich panels	150-157
Ren, Yuanlin / Wang, Yulin / Wang, Linjie / Liu, Tiantian	Evaluation of intumescent fire retardants and synergistic agents for use in wood flour/recycled polypropylene composites	273-278
Ahmed Sbia, Libya / Peyvandi, Amirpasha / Soroushian, Parviz / Balachandra, Anagi M. / Sobolev, Konstantin	Evaluation of modified-graphite nanomaterials in concrete nanocomposite based on packing density principles	413-422
Kunecký, Jiří / Sebera, Václav / Hasníková, Hana / Arciszewska-Kędzior, Anna / Tippner, Jan / Kloiber, Michal	Experimental assessment of a full-scale lap scarf timber joint accompanied by a finite element analysis and digital image correlation	24-33
Nazari, Ali / Maghsoudpour, Ali / Sanjayan, Jay G.	Flexural strength of plain and fibre-reinforced boroaluminosilicate geopolymer	207-213
Yang, Xu / You, Zhanping	High temperature performance evaluation of bio-oil modified asphalt binders using the DSR and MSCR tests	380-387
Antunes, V. / Freire, A. C. / Quaresma, L. / Micaelo, R.	Influence of the geometrical and physical properties of filler in the filler–bitumen interaction	322-329
Lamperti, Riccardo / Grenfell, James / Sangiorgi, Cesare / Lantieri, Claudio / Airey, Gordon D.	Influence of waxes on adhesion properties of bituminous binders	404-412
Fajardo, G. / Cruz-López, Arquímedes / Cruz-Moreno, Dulce / Valdez, P. / Torres, Gilberto / Zanella, Rodolfo	Innovative application of silicon nanoparticles (SN): Improvement of the barrier effect in hardened Portland cement-based materials	158-167
Sun, Xiao / Zhang, Bin / Dai, Qingli / Yu, Xiong	Investigation of internal curing effects on microstructure and permeability of interface transition zones in cement mortar with SEM imaging, transport simulation and hydration modeling techniques	366-379
Shafabakhsh, GholamAli / Tanakizadeh, Amin	Investigation of loading features effects on resilient modulus of asphalt mixtures using Adaptive Neuro-Fuzzy Inference System	256-263
Ghafoori, Elyas / Motavalli, Masoud	Lateral-torsional buckling of steel I-beams retrofitted by bonded and un-bonded CFRP laminates with different pre-stress levels: Experimental and numerical study	194-206
Haghshenas, H. F. / Khodaii, A. / Saleh, M.	Long term effectiveness of anti-stripping agents	307-312
Xu, Shilang / Liu, Jintao / Li, Qinghua	Mechanical properties and microstructure of multi-walled carbon nanotube-reinforced cement paste	16-23
Saba, N. / Paridah, M. T. / Jawaid, M.	Mechanical properties of kenaf fibre reinforced polymer composite: A review	87-96
Loring, Hannah B. / Davids, William G.	Mechanically fastened hybrid composite strips for flexural strengthening of concrete beams	118-129
Yoo, Hoon / Lee, Sung-Hyung / Lee, Jun-Kyung	Mechanism of bonding between Zn–Al-coated wires and Zn–Cu alloy casting medium in hot casting socket terminations for large bridge cables	396-403
Fang, Yanfeng / Chang, Jun	Microstructure changes of waste hydrated cement paste induced by accelerated carbonation	360-365
Sakhaeifar, Maryam S. / Kim, Y. Richard / Kabir, Pooyan	New predictive models for the dynamic modulus of hot mix asphalt	221-231
Qapo, Michael / Dirar, Samir / Yang, Jian / Elshafie, Mohammed Z. E. B.	Nonlinear finite element modelling and parametric study of CFRP shear-strengthened prestressed concrete girders	245-255
Wang, Chung-Yue / Liao, Shu-Tao / Tong, Jian-Hua / Chiu, Chin-Lung	Numerical and experimental study on multi-directional SAFT to detect defects inside plain or reinforced concrete	351-359
Abouhussien, Ahmed A. / Hassan, Assem A. A.	Optimizing the durability and service life of self-consolidating concrete containing metakaolin using statistical analysis	297-306
Chen, Chun-Tao / Nguyen, Hoang-Anh / Chang, Ta-Peng / Yang, Tzong-Ruey / Nguyen, Tien-Dung	Performance and microstructural examination on composition of hardened paste with no-cement SFC binder	264-272
Awal, A. S. M. Abdul / Shehu, I. A.	Performance evaluation of concrete containing high volume palm oil fuel ash exposed to elevated temperature	214-220
Luo, Sang / Lu, Qing / Qian, Zhendong	Performance evaluation of epoxy modified open-graded porous asphalt concrete	97-102
Halder, Bijoy Krishna / Tandon, Vivek / Chintalapalle, Ramana V. / Roy, Debarshi / Tarquin, Anthony	A potential biological approach for sustainable disposal of total dissolved solid of brine in civil infrastructure	51-60
Cong, Ma / Bing, Chen	Properties of a foamed concrete with soil as filler	61-69
Zhang, Feng / Hu, Changbin	The research for structural characteristics and modification mechanism of crumb rubber compound modified asphalts	330-342
Berra, Mario / Mangialardi, Teresa / Paolini, Antonio Evangelista	Reuse of woody biomass fly ash in cement-based materials	286-296
Kang, Yang / Song, Mingyu / Pu, Liang / Liu, Tingfu	Rheological behaviors of epoxy asphalt binder in comparison of base asphalt binder and SBS modified asphalt binder	343-350
Valcuende, M. / Benito, F. / Parra, C. / Miñano, I.	Shrinkage of self-compacting concrete made with blast furnace slag as fine aggregate	1-9
Xu, Dongyu / Banerjee, Sourav / Wang, Yanbing / Huang, Shifeng / Cheng, Xin	Temperature and loading effects of embedded smart piezoelectric sensor for health monitoring of concrete structures	187-193
Yin, Anyi / Yang, Xinhua / Zhang, Chuanchuan / Zeng, Guowei / Yang, Zhenjun	Three-dimensional heterogeneous fracture simulation of asphalt mixture under uniaxial tension with cohesive crack model	103-117
Zhang, Xiaogang / Wang, Jiao / Zhao, Yangang / Tang, Luping / Xing, Feng	Time-dependent probability assessment for chloride induced corrosion of RC structures using the third-moment method	232-244
Schröfl, Christof / Mechtcherine, Viktor / Kaestner, Anders / Vontobel, Peter / Hovind, Jan / Lehmann, Eberhard	Transport of water through strain-hardening cement-based composite (SHCC) applied on top of cracked reinforced concrete slabs with and without hydrophobization of cracks – Investigation by neutron radiography	70-86
Zhou, Xiaolong / Wang, Feng / Yuan, Xulu / Kuang, Minming / Song, Yueqin / Li, Chenglie	Usage of slurry oil for the preparation of crumb-rubber-modified asphalt emulsions	279-285
Han, Dongyeop / Lee, Gun-Cheol / Yoon, Seung-Joe / Kim, Kyoung-Min	Viscosity influence on rising behavior of model air bubbles in fresh mortar	10-15

About this
data sheet
IssueID
22555
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - February 2015

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - February 2015

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.