Construction and Building Materials - Februar 2015

Erschienen:	Februar 2015

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Poletti, Elisa / Vasconcelos, Graça / Jorge, Marco	Application of near surface mounted (NSM) strengthening technique to traditional timber frame walls	34-50
Karagöl, Fatma / Demirboğa, Ramazan / Khushefati, Waleed H.	Behavior of fresh and hardened concretes with antifreeze admixtures in deep-freeze low temperatures and exterior winter conditions	388-395
Adegoloye, G. / Beaucour, A.-L. / Ortola, S. / Noumowe, A.	Concretes made of EAF slag and AOD slag aggregates from stainless steel process: Mechanical properties and durability	313-321
Libessart, Laurent / De Caro, Pascale / Djelal, Chafika / Dubois, Isabelle	Correlation between adhesion energy of release agents on the formwork and demoulding performances	130-139
Caprili, Silvia / Salvatore, Walter	Cyclic behaviour of uncorroded and corroded steel reinforcing bars	168-186
de Rosario, Iván / Elhaddad, Farid / Pan, Aldara / Benavides, Rosa / Rivas, Teresa / Mosquera, María J.	Effectiveness of a novel consolidant on granite: Laboratory and in situ results	140-149
Garrido, Mário / Correia, João R. / Keller, Thomas	Effects of elevated temperature on the shear response of PET and PUR foams used in composite sandwich panels	150-157
Ren, Yuanlin / Wang, Yulin / Wang, Linjie / Liu, Tiantian	Evaluation of intumescent fire retardants and synergistic agents for use in wood flour/recycled polypropylene composites	273-278
Ahmed Sbia, Libya / Peyvandi, Amirpasha / Soroushian, Parviz / Balachandra, Anagi M. / Sobolev, Konstantin	Evaluation of modified-graphite nanomaterials in concrete nanocomposite based on packing density principles	413-422
Kunecký, Jiří / Sebera, Václav / Hasníková, Hana / Arciszewska-Kędzior, Anna / Tippner, Jan / Kloiber, Michal	Experimental assessment of a full-scale lap scarf timber joint accompanied by a finite element analysis and digital image correlation	24-33
Nazari, Ali / Maghsoudpour, Ali / Sanjayan, Jay G.	Flexural strength of plain and fibre-reinforced boroaluminosilicate geopolymer	207-213
Yang, Xu / You, Zhanping	High temperature performance evaluation of bio-oil modified asphalt binders using the DSR and MSCR tests	380-387
Antunes, V. / Freire, A. C. / Quaresma, L. / Micaelo, R.	Influence of the geometrical and physical properties of filler in the filler–bitumen interaction	322-329
Lamperti, Riccardo / Grenfell, James / Sangiorgi, Cesare / Lantieri, Claudio / Airey, Gordon D.	Influence of waxes on adhesion properties of bituminous binders	404-412
Fajardo, G. / Cruz-López, Arquímedes / Cruz-Moreno, Dulce / Valdez, P. / Torres, Gilberto / Zanella, Rodolfo	Innovative application of silicon nanoparticles (SN): Improvement of the barrier effect in hardened Portland cement-based materials	158-167
Sun, Xiao / Zhang, Bin / Dai, Qingli / Yu, Xiong	Investigation of internal curing effects on microstructure and permeability of interface transition zones in cement mortar with SEM imaging, transport simulation and hydration modeling techniques	366-379
Shafabakhsh, GholamAli / Tanakizadeh, Amin	Investigation of loading features effects on resilient modulus of asphalt mixtures using Adaptive Neuro-Fuzzy Inference System	256-263
Ghafoori, Elyas / Motavalli, Masoud	Lateral-torsional buckling of steel I-beams retrofitted by bonded and un-bonded CFRP laminates with different pre-stress levels: Experimental and numerical study	194-206
Haghshenas, H. F. / Khodaii, A. / Saleh, M.	Long term effectiveness of anti-stripping agents	307-312
Xu, Shilang / Liu, Jintao / Li, Qinghua	Mechanical properties and microstructure of multi-walled carbon nanotube-reinforced cement paste	16-23
Saba, N. / Paridah, M. T. / Jawaid, M.	Mechanical properties of kenaf fibre reinforced polymer composite: A review	87-96
Loring, Hannah B. / Davids, William G.	Mechanically fastened hybrid composite strips for flexural strengthening of concrete beams	118-129
Yoo, Hoon / Lee, Sung-Hyung / Lee, Jun-Kyung	Mechanism of bonding between Zn–Al-coated wires and Zn–Cu alloy casting medium in hot casting socket terminations for large bridge cables	396-403
Fang, Yanfeng / Chang, Jun	Microstructure changes of waste hydrated cement paste induced by accelerated carbonation	360-365
Sakhaeifar, Maryam S. / Kim, Y. Richard / Kabir, Pooyan	New predictive models for the dynamic modulus of hot mix asphalt	221-231
Qapo, Michael / Dirar, Samir / Yang, Jian / Elshafie, Mohammed Z. E. B.	Nonlinear finite element modelling and parametric study of CFRP shear-strengthened prestressed concrete girders	245-255
Wang, Chung-Yue / Liao, Shu-Tao / Tong, Jian-Hua / Chiu, Chin-Lung	Numerical and experimental study on multi-directional SAFT to detect defects inside plain or reinforced concrete	351-359
Abouhussien, Ahmed A. / Hassan, Assem A. A.	Optimizing the durability and service life of self-consolidating concrete containing metakaolin using statistical analysis	297-306
Chen, Chun-Tao / Nguyen, Hoang-Anh / Chang, Ta-Peng / Yang, Tzong-Ruey / Nguyen, Tien-Dung	Performance and microstructural examination on composition of hardened paste with no-cement SFC binder	264-272
Awal, A. S. M. Abdul / Shehu, I. A.	Performance evaluation of concrete containing high volume palm oil fuel ash exposed to elevated temperature	214-220
Luo, Sang / Lu, Qing / Qian, Zhendong	Performance evaluation of epoxy modified open-graded porous asphalt concrete	97-102
Halder, Bijoy Krishna / Tandon, Vivek / Chintalapalle, Ramana V. / Roy, Debarshi / Tarquin, Anthony	A potential biological approach for sustainable disposal of total dissolved solid of brine in civil infrastructure	51-60
Cong, Ma / Bing, Chen	Properties of a foamed concrete with soil as filler	61-69
Zhang, Feng / Hu, Changbin	The research for structural characteristics and modification mechanism of crumb rubber compound modified asphalts	330-342
Berra, Mario / Mangialardi, Teresa / Paolini, Antonio Evangelista	Reuse of woody biomass fly ash in cement-based materials	286-296
Kang, Yang / Song, Mingyu / Pu, Liang / Liu, Tingfu	Rheological behaviors of epoxy asphalt binder in comparison of base asphalt binder and SBS modified asphalt binder	343-350
Valcuende, M. / Benito, F. / Parra, C. / Miñano, I.	Shrinkage of self-compacting concrete made with blast furnace slag as fine aggregate	1-9
Xu, Dongyu / Banerjee, Sourav / Wang, Yanbing / Huang, Shifeng / Cheng, Xin	Temperature and loading effects of embedded smart piezoelectric sensor for health monitoring of concrete structures	187-193
Yin, Anyi / Yang, Xinhua / Zhang, Chuanchuan / Zeng, Guowei / Yang, Zhenjun	Three-dimensional heterogeneous fracture simulation of asphalt mixture under uniaxial tension with cohesive crack model	103-117
Zhang, Xiaogang / Wang, Jiao / Zhao, Yangang / Tang, Luping / Xing, Feng	Time-dependent probability assessment for chloride induced corrosion of RC structures using the third-moment method	232-244
Schröfl, Christof / Mechtcherine, Viktor / Kaestner, Anders / Vontobel, Peter / Hovind, Jan / Lehmann, Eberhard	Transport of water through strain-hardening cement-based composite (SHCC) applied on top of cracked reinforced concrete slabs with and without hydrophobization of cracks – Investigation by neutron radiography	70-86
Zhou, Xiaolong / Wang, Feng / Yuan, Xulu / Kuang, Minming / Song, Yueqin / Li, Chenglie	Usage of slurry oil for the preparation of crumb-rubber-modified asphalt emulsions	279-285
Han, Dongyeop / Lee, Gun-Cheol / Yoon, Seung-Joe / Kim, Kyoung-Min	Viscosity influence on rising behavior of model air bubbles in fresh mortar	10-15

Über diese
Datenseite
IssueID
22555
Veröffentlicht am:
15.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Februar 2015

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Februar 2015

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.