Construction and Building Materials - December 2014

Published:	December 2014

Articles in this Issue

Author(s)	Title	Page(s)
Cao, Chong	3D simulation of localized steel corrosion in chloride contaminated reinforced concrete	434-443
Ziari, Hassan / Hayati, Parham / Sobhani, Jafar	Airfield self-consolidating concrete pavements (ASCCP): Mechanical and durability properties	174-181
Guerra, M. / Ceia, F. / de Brito, J. / Júlio, E.	Anchorage of steel rebars to recycled aggregates concrete	113-123
Liu, Guanlan / Jin, Xin / Rose, Avery / Cui, Yuanchen / Glover, Charles J.	Application of density gradient column to flexible pavement materials: Aggregate characteristics and asphalt absorption	182-188
Horszczaruk, Elzbieta / Brzozowski, Piotr	Bond strength of underwater repair concretes under hydrostatic pressure	167-173
Rossi, Efigênia / Sales, Almir	Carbon footprint of coarse aggregate in Brazilian construction	333-339
Qiu, Can-Xing / Zhu, Songye	Characterization of cyclic properties of superelastic monocrystalline Cu–Al–Be SMA wires for seismic applications	219-230
Sanchez, L. F. M. / Multon, S. / Sellier, A. / Cyr, M. / Fournier, B. / Jolin, M.	Comparative study of a chemo–mechanical modeling for alkali silica reaction (ASR) with experimental evidences	301-315
Al-Saleh, Saleh A.	Comparison of theoretical and experimental shrinkage in concrete	326-332
Pradhan, Bulu	Corrosion behavior of steel reinforcement in concrete exposed to composite chloride–sulfate environment	398-410
Zhang, Yuqing / Luo, Xue / Luo, Rong / Lytton, Robert L.	Crack initiation in asphalt mixtures under external compressive loads	94-103
Forster, Alan M. / Szadurski, Ewan M. / Banfill, Phillip F. G.	Deterioration of natural hydraulic lime mortars, I: Effects of chemically accelerated leaching on physical and mechanical properties of uncarbonated materials	199-207
Sultana, Sharmin / Bhasin, Amit	Effect of chemical composition on rheology and mechanical properties of asphalt binder	293-300
Fares, Galal / Khan, M. Iqbal	The effect of curing time on the ASR expansion of different HPC composites	124-132
Snoeck, D. / Schaubroeck, D. / Dubruel, P. / De Belie, N.	Effect of high amounts of superabsorbent polymers and additional water on the workability, microstructure and strength of mortars with a water-to-cement ratio of 0.50	148-157
Tikkanen, Johanna / Cwirzen, Andrzej / Penttala, Vesa	Effects of mineral powders on hydration process and hydration products in normal strength concrete	7-14
Yusoff, Nur Izzi Md. / Breem, Aeyman Abozed Saleh / Alattug, Hani N. M. / Hamim, Asmah / Ahmad, Juraidah	The effects of moisture susceptibility and ageing conditions on nano-silica/polymer-modified asphalt mixtures	139-147
He, Yan / Zhang, Xiong / Zhang, Yongjuan / Zhou, Yun	Effects of particle characteristics of lightweight aggregate on mechanical properties of lightweight aggregate concrete	270-282
Xu, Qinwu / Chang, George K.	Experimental and numerical study of asphalt material geospatial heterogeneity with intelligent compaction technology on roads	189-198
Wu, Qier / Rougelot, Thomas / Burlion, Nicolas / Bourbon, Xavier	Experimental investigation of the first desorption isotherm of a high performance concrete with thin sliced samples	389-397
Xie, Jian / Li, Xiaomei / Wu, Honghai	Experimental study on the axial-compression performance of concrete at cryogenic temperatures	380-388
Kavussi, Amir / Qazizadeh, Morteza Jalili	Fatigue characterization of asphalt mixes containing electric arc furnace (EAF) steel slag subjected to long term aging	158-166
Jiang, Tao / Feng, Xinhao / Wang, Qingwen / Xiao, Zefang / Wang, Fengqiang / Xie, Yanjun	Fire performance of oak wood modified with N-methylol resin and methylolated guanylurea phosphate/boric acid-based fire retardant	1-6
Pei, Jianzhong / Wen, Yong / Li, Yanwei / Shi, Xin / Zhang, Jiupeng / Li, Rui / Du, Qunle	Flame-retarding effects and combustion properties of asphalt binder blended with organo montmorillonite and alumina trihydrate	41-47
Mohamed, Nedal / Soliman, Ahmed M. / Nehdi, Moncef L.	Full-scale pipes using dry-cast steel fibre-reinforced concrete	411-422
Song, Il Hyun / Ryou, Jae Suk	Hybrid techniques for quality improvement of recycled fine aggregate	56-64
Silva, B. A. / Ferreira Pinto, A. P. / Gomes, Augusto	Influence of natural hydraulic lime content on the properties of aerial lime-based mortars	208-218
Martinez-Arguelles, Gilberto / Giustozzi, Filippo / Crispino, Maurizio / Flintsch, Gerardo W.	Investigating physical and rheological properties of foamed bitumen	423-433
Wu, Zhijun / Wong, Louis Ngai Yuen	Investigating the effects of micro-defects on the dynamic properties of rock using Numerical Manifold method	72-82
Mohammed, Mahmoud Khashaa / Dawson, Andrew Robert / Thom, Nicholas Howard	Macro/micro-pore structure characteristics and the chloride penetration of self-compacting concrete incorporating different types of filler and mineral admixture	83-93
Beltrán, Manuel G. / Agrela, Francisco / Barbudo, Auxi / Ayuso, Jesús / Ramírez, Antonio	Mechanical and durability properties of concretes manufactured with biomass bottom ash and recycled coarse aggregates	231-238
Karakoç, Mehmet Burhan / Türkmen, İbrahim / Maraş, Müslüm Murat / Kantarcı, Fatih / Demirboğa, Ramazan / Uğur Toprak, M.	Mechanical properties and setting time of ferrochrome slag based geopolymer paste and mortar	283-292
Blanco, A. / Pujadas, P. / Cavalaro, S. H. P. / Aguado, A.	Methodology for the design of controlled low-strength materials. Application to the backfill of narrow trenches	23-30
Akçaözoğlu, Kubilay / Fener, Mustafa / Akçaözoğlu, Semiha / Öcal, Recep	Microstructural examination of the effect of elevated temperature on the concrete containing clinoptilolite	316-325
Liu, Shukui / Zhu, Jinying / Seraj, Saamiya / Cano, Rachel / Juenger, Maria	Monitoring setting and hardening process of mortar and concrete using ultrasonic shear waves	248-255
Correia, Viviane da Costa / Santos, Sergio Francisco / Mármol, Gonzalo / Curvelo, Antonio Aprigio da Silva / Savastano, Holmer	Potential of bamboo organosolv pulp as a reinforcing element in fiber–cement materials	65-71
Pan, Zhihua / Li, Hengzhi / Liu, Weiqing	Preparation and characterization of super low density foamed concrete from Portland cement and admixtures	256-261
Rashad, Alaa M.	Recycled waste glass as fine aggregate replacement in cementitious materials based on Portland cement	340-357
Lee, Hoong-Pin / Awang, Abdullah Zawawi / Omar, Wahid	Steel strap confined high strength concrete under uniaxial cyclic compression	48-55
Dong, Biqin / Liu, Yuqing / Han, Ningxu / Sun, Hongfang / Xing, Feng / Qin, Daoding	Study on the microstructure of cement-based piezoelectric ceramic composites	133-138
Saraya, Mohamed El-Shahate Ismaiel	Study physico-chemical properties of blended cements containing fixed amount of silica fume, blast furnace slag, basalt and limestone, a comparative study	104-112
AzariJafari, Hessam / Kazemian, Ali / Ahmadi, Babak / Berenjian, Javad / Shekarchi, Mohammad	Studying effects of chemical admixtures on the workability retention of zeolitic Portland cement mortar	262-269
Jacquier, Nicolas / Girhammar, Ulf Arne	Tests on glulam–CLT shear connections with double-sided punched metal plate fasteners and inclined screws	444-457
Zhang, Yong / Zhang, Mingzhong	Transport properties in unsaturated cement-based materials – A review	367-379
Sharma, Shruti / Mukherjee, Abhijit	Ultrasonic guided waves for monitoring the setting process of concretes with varying workabilities	358-366
Isik, Ibrahim E. / Ozkul, M. Hulusi	Utilization of polysaccharides as viscosity modifying agent in self-compacting concrete	239-247
Liu, Shao-jie / Hu, Qian-qian / Zhao, Feng-qing / Chu, Xiao-meng	Utilization of steel slag, iron tailings and fly ash as aggregates to prepare a polymer-modified waterproof mortar with a core–shell styrene–acrylic copolymer as the modifier	15-22
Contreras, M. / Martín, M. I. / Gázquez, M. J. / Romero, M. / Bolívar, J. P.	Valorisation of ilmenite mud waste in the manufacture of commercial ceramic	31-40

About this
data sheet
IssueID
22548
Published on:
13/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - December 2014

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - December 2014

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.