Construction and Building Materials - Dezember 2014

Erschienen:	Dezember 2014

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Cao, Chong	3D simulation of localized steel corrosion in chloride contaminated reinforced concrete	434-443
Ziari, Hassan / Hayati, Parham / Sobhani, Jafar	Airfield self-consolidating concrete pavements (ASCCP): Mechanical and durability properties	174-181
Guerra, M. / Ceia, F. / de Brito, J. / Júlio, E.	Anchorage of steel rebars to recycled aggregates concrete	113-123
Liu, Guanlan / Jin, Xin / Rose, Avery / Cui, Yuanchen / Glover, Charles J.	Application of density gradient column to flexible pavement materials: Aggregate characteristics and asphalt absorption	182-188
Horszczaruk, Elzbieta / Brzozowski, Piotr	Bond strength of underwater repair concretes under hydrostatic pressure	167-173
Rossi, Efigênia / Sales, Almir	Carbon footprint of coarse aggregate in Brazilian construction	333-339
Qiu, Can-Xing / Zhu, Songye	Characterization of cyclic properties of superelastic monocrystalline Cu–Al–Be SMA wires for seismic applications	219-230
Sanchez, L. F. M. / Multon, S. / Sellier, A. / Cyr, M. / Fournier, B. / Jolin, M.	Comparative study of a chemo–mechanical modeling for alkali silica reaction (ASR) with experimental evidences	301-315
Al-Saleh, Saleh A.	Comparison of theoretical and experimental shrinkage in concrete	326-332
Pradhan, Bulu	Corrosion behavior of steel reinforcement in concrete exposed to composite chloride–sulfate environment	398-410
Zhang, Yuqing / Luo, Xue / Luo, Rong / Lytton, Robert L.	Crack initiation in asphalt mixtures under external compressive loads	94-103
Forster, Alan M. / Szadurski, Ewan M. / Banfill, Phillip F. G.	Deterioration of natural hydraulic lime mortars, I: Effects of chemically accelerated leaching on physical and mechanical properties of uncarbonated materials	199-207
Sultana, Sharmin / Bhasin, Amit	Effect of chemical composition on rheology and mechanical properties of asphalt binder	293-300
Fares, Galal / Khan, M. Iqbal	The effect of curing time on the ASR expansion of different HPC composites	124-132
Snoeck, D. / Schaubroeck, D. / Dubruel, P. / De Belie, N.	Effect of high amounts of superabsorbent polymers and additional water on the workability, microstructure and strength of mortars with a water-to-cement ratio of 0.50	148-157
Tikkanen, Johanna / Cwirzen, Andrzej / Penttala, Vesa	Effects of mineral powders on hydration process and hydration products in normal strength concrete	7-14
Yusoff, Nur Izzi Md. / Breem, Aeyman Abozed Saleh / Alattug, Hani N. M. / Hamim, Asmah / Ahmad, Juraidah	The effects of moisture susceptibility and ageing conditions on nano-silica/polymer-modified asphalt mixtures	139-147
He, Yan / Zhang, Xiong / Zhang, Yongjuan / Zhou, Yun	Effects of particle characteristics of lightweight aggregate on mechanical properties of lightweight aggregate concrete	270-282
Xu, Qinwu / Chang, George K.	Experimental and numerical study of asphalt material geospatial heterogeneity with intelligent compaction technology on roads	189-198
Wu, Qier / Rougelot, Thomas / Burlion, Nicolas / Bourbon, Xavier	Experimental investigation of the first desorption isotherm of a high performance concrete with thin sliced samples	389-397
Xie, Jian / Li, Xiaomei / Wu, Honghai	Experimental study on the axial-compression performance of concrete at cryogenic temperatures	380-388
Kavussi, Amir / Qazizadeh, Morteza Jalili	Fatigue characterization of asphalt mixes containing electric arc furnace (EAF) steel slag subjected to long term aging	158-166
Jiang, Tao / Feng, Xinhao / Wang, Qingwen / Xiao, Zefang / Wang, Fengqiang / Xie, Yanjun	Fire performance of oak wood modified with N-methylol resin and methylolated guanylurea phosphate/boric acid-based fire retardant	1-6
Pei, Jianzhong / Wen, Yong / Li, Yanwei / Shi, Xin / Zhang, Jiupeng / Li, Rui / Du, Qunle	Flame-retarding effects and combustion properties of asphalt binder blended with organo montmorillonite and alumina trihydrate	41-47
Mohamed, Nedal / Soliman, Ahmed M. / Nehdi, Moncef L.	Full-scale pipes using dry-cast steel fibre-reinforced concrete	411-422
Song, Il Hyun / Ryou, Jae Suk	Hybrid techniques for quality improvement of recycled fine aggregate	56-64
Silva, B. A. / Ferreira Pinto, A. P. / Gomes, Augusto	Influence of natural hydraulic lime content on the properties of aerial lime-based mortars	208-218
Martinez-Arguelles, Gilberto / Giustozzi, Filippo / Crispino, Maurizio / Flintsch, Gerardo W.	Investigating physical and rheological properties of foamed bitumen	423-433
Wu, Zhijun / Wong, Louis Ngai Yuen	Investigating the effects of micro-defects on the dynamic properties of rock using Numerical Manifold method	72-82
Mohammed, Mahmoud Khashaa / Dawson, Andrew Robert / Thom, Nicholas Howard	Macro/micro-pore structure characteristics and the chloride penetration of self-compacting concrete incorporating different types of filler and mineral admixture	83-93
Beltrán, Manuel G. / Agrela, Francisco / Barbudo, Auxi / Ayuso, Jesús / Ramírez, Antonio	Mechanical and durability properties of concretes manufactured with biomass bottom ash and recycled coarse aggregates	231-238
Karakoç, Mehmet Burhan / Türkmen, İbrahim / Maraş, Müslüm Murat / Kantarcı, Fatih / Demirboğa, Ramazan / Uğur Toprak, M.	Mechanical properties and setting time of ferrochrome slag based geopolymer paste and mortar	283-292
Blanco, A. / Pujadas, P. / Cavalaro, S. H. P. / Aguado, A.	Methodology for the design of controlled low-strength materials. Application to the backfill of narrow trenches	23-30
Akçaözoğlu, Kubilay / Fener, Mustafa / Akçaözoğlu, Semiha / Öcal, Recep	Microstructural examination of the effect of elevated temperature on the concrete containing clinoptilolite	316-325
Liu, Shukui / Zhu, Jinying / Seraj, Saamiya / Cano, Rachel / Juenger, Maria	Monitoring setting and hardening process of mortar and concrete using ultrasonic shear waves	248-255
Correia, Viviane da Costa / Santos, Sergio Francisco / Mármol, Gonzalo / Curvelo, Antonio Aprigio da Silva / Savastano, Holmer	Potential of bamboo organosolv pulp as a reinforcing element in fiber–cement materials	65-71
Pan, Zhihua / Li, Hengzhi / Liu, Weiqing	Preparation and characterization of super low density foamed concrete from Portland cement and admixtures	256-261
Rashad, Alaa M.	Recycled waste glass as fine aggregate replacement in cementitious materials based on Portland cement	340-357
Lee, Hoong-Pin / Awang, Abdullah Zawawi / Omar, Wahid	Steel strap confined high strength concrete under uniaxial cyclic compression	48-55
Dong, Biqin / Liu, Yuqing / Han, Ningxu / Sun, Hongfang / Xing, Feng / Qin, Daoding	Study on the microstructure of cement-based piezoelectric ceramic composites	133-138
Saraya, Mohamed El-Shahate Ismaiel	Study physico-chemical properties of blended cements containing fixed amount of silica fume, blast furnace slag, basalt and limestone, a comparative study	104-112
AzariJafari, Hessam / Kazemian, Ali / Ahmadi, Babak / Berenjian, Javad / Shekarchi, Mohammad	Studying effects of chemical admixtures on the workability retention of zeolitic Portland cement mortar	262-269
Jacquier, Nicolas / Girhammar, Ulf Arne	Tests on glulam–CLT shear connections with double-sided punched metal plate fasteners and inclined screws	444-457
Zhang, Yong / Zhang, Mingzhong	Transport properties in unsaturated cement-based materials – A review	367-379
Sharma, Shruti / Mukherjee, Abhijit	Ultrasonic guided waves for monitoring the setting process of concretes with varying workabilities	358-366
Isik, Ibrahim E. / Ozkul, M. Hulusi	Utilization of polysaccharides as viscosity modifying agent in self-compacting concrete	239-247
Liu, Shao-jie / Hu, Qian-qian / Zhao, Feng-qing / Chu, Xiao-meng	Utilization of steel slag, iron tailings and fly ash as aggregates to prepare a polymer-modified waterproof mortar with a core–shell styrene–acrylic copolymer as the modifier	15-22
Contreras, M. / Martín, M. I. / Gázquez, M. J. / Romero, M. / Bolívar, J. P.	Valorisation of ilmenite mud waste in the manufacture of commercial ceramic	31-40

Über diese
Datenseite
IssueID
22548
Veröffentlicht am:
13.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Dezember 2014

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Dezember 2014

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.