Construction and Building Materials - November 2014

Published:	November 2014

Articles in this Issue

Author(s)	Title	Page(s)
Cong, Ma / Longzhu, Chen / Bing, Chen	Analysis of strength development in soft clay stabilized with cement-based stabilizer	354-362
Azari, Hoda / Nazarian, Soheil / Yuan, Deren	Assessing sensitivity of impact echo and ultrasonic surface waves methods for nondestructive evaluation of concrete structures	384-391
Trivedi, N. / Singh, R. K.	Assessment of in-situ concrete creep: Cylindrical specimen and prototype nuclear containment structure	16-25
Saca, Nastasia / Georgescu, Maria	Behavior of ternary blended cements containing limestone filler and fly ash in magnesium sulfate solution at low temperature	246-253
Karakaş, Ahmet Sertaç / Sayin, Baris / Kuloğlu, Necati	The changes in the mechanical properties of neat and SBS-modified HMA pavements due to traffic loads and environmental effects over a one-year period	406-415
Chen, G. M. / He, Y. H. / Yang, H. / Chen, J. F. / Guo, Y. C.	Compressive behavior of steel fiber reinforced recycled aggregate concrete after exposure to elevated temperatures	1-15
Siva Chidambaram, R. / Agarwal, Pankaj	The confining effect of geo-grid on the mechanical properties of concrete specimens with steel fiber under compression and flexure	628-637
Keskin, Suleyman Bahadir / Şahmaran, Mustafa / Yaman, İsmail Özgür / Lachemi, Mohamed	Correlation between the viscoelastic properties and cracking potential of engineered cementitious composites	375-383
Sanmartín, Patricia / Cappitelli, Francesca / Mitchell, Ralph	Current methods of graffiti removal: A review	363-374
Matyščák, Ondřej / Ottosen, L. M. / Rörig-Dalgaard, Inge	Desalination of salt damaged Obernkirchen sandstone by an applied DC field	561-569
Xavier, J. / Oliveira, M. / Morais, J. J. L. / de Moura, M. F. S. F.	Determining mode II cohesive law of Pinus pinaster by combining the end-notched flexure test with digital image correlation	109-115
Tennakoon, Chandani / Nazari, Ali / Sanjayan, Jay G. / Sagoe-Crentsil, Kwesi	Distribution of oxides in fly ash controls strength evolution of geopolymers	72-82
Makhloufi, Z. / Bouziani, T. / Hadjoudja, M. / Bederina, M.	Durability of limestone mortars based on quaternary binders subjected to sulfuric acid using drying–immersion cycles	579-588
Espersson, Maria	Effect in the high modulus asphalt concrete with the temperature	638-643
Salman, Muhammad / Cizer, Özlem / Pontikes, Yiannis / Vandewalle, Lucie / Blanpain, Bart / Van Balen, Koen	Effect of curing temperatures on the alkali activation of crystalline continuous casting stainless steel slag	308-316
Li, Shiwei / Gao, Bo / Tu, Ganfeng / Hu, Liang / Sun, Shuchen / Zhu, Guanglin / Yin, Shaohua	Effects of magnesium on the microstructure and corrosion resistance of Zn–55Al–1.6Si coating	124-131
Chen, Chun-Tao / Chang, Jiang-jhy / Yeih, Wei-chung	The effects of specimen parameters on the resistivity of concrete	35-43
Ozawa, Mitsuo / Morimoto, Hiroaki	Effects of various fibres on high-temperature spalling in high-performance concrete	83-92
Maes, Mathias / Van Tittelboom, Kim / De Belie, Nele	The efficiency of self-healing cementitious materials by means of encapsulated polyurethane in chloride containing environments	528-537
Ma, Hongyan / Hou, Dongshuai / Liu, Jun / Li, Zongjin	Estimate the relative electrical conductivity of C–S–H gel from experimental results	392-396
Boubekeur, Toufik / Ezziane, Karim / Kadri, El-Hadj	Estimation of mortars compressive strength at different curing temperature by the maturity method	299-307
Zerbino, R. / Giaccio, G. / Marfil, S.	Evaluation of alkali–silica reaction in concretes with natural rice husk ash using optical microscopy	132-140
Yu, Bin / Jiao, Liya / Ni, Fujian / Yang, Jun	Evaluation of plastic–rubber asphalt: Engineering property and environmental concern	416-424
Agarwal, Atul / Nanda, Bharadwaj / Maity, Damodar	Experimental investigation on chemically treated bamboo reinforced concrete beams and columns	610-617
Li, Fumin / Liu, Zhenguo / Zhao, Yu / Qu, Yaxu / Lu, Rong	Experimental study on corrosion progress of interior bond section of anchor cables under chloride attack	344-353
Jimma, Betiglu E. / Rangaraju, Prasada Rao	Film-forming ability of flowable cement pastes and its application in mixture proportioning of pervious concrete	273-282
Osei-Antwi, Michael / De Castro, Julia / Vassilopoulos, Anastasios P. / Keller, Thomas	Fracture in complex balsa cores of fiber-reinforced polymer sandwich structures	194-201
Magallanes-Rivera, R. X. / Escalante-García, J. I.	Hemihydrate or waste anhydrite in composite binders with blast-furnace slag: Hydration products, microstructures and dimensional stability	317-326
Kim, H. K. / Jang, J. G. / Choi, Y. C. / Lee, H. K.	Improved chloride resistance of high-strength concrete amended with coal bottom ash for internal curing	334-343
Tong, Yuping / Zhao, Shunbo / Ma, Juntao / Wang, Lei / Zhang, Yanan / Gao, Yafeng / Xie, Yi Min	Improving cracking and drying shrinkage properties of cement mortar by adding chemically treated luffa fibres	327-333
Soares, D. / de Brito, J. / Ferreira, J. / Pacheco, J.	In situ materials characterization of full-scale recycled aggregates concrete structures	237-245
Mohammadi, Iman / Khabbaz, Hadi / Vessalas, Kirk	In-depth assessment of Crumb Rubber Concrete (CRC) prepared by water-soaking treatment method for rigid pavements	456-471
Srubar, Wil V. / Miller, Sabbie A. / Lepech, Michael D. / Billington, Sarah L.	Incorporating spatiotemporal effects and moisture diffusivity into a multi-criteria materials selection methodology for wood–polymer composites	589-601
da Silva, Alexandra M. / de Brito, Jorge / Veiga, Rosário	Incorporation of fine plastic aggregates in rendering mortars	226-236
Xiong, Chuansheng / Jiang, Linhua / Song, Zijian / Liu, Rong / You, Lushen / Chu, Hongqiang	Influence of cation type on deterioration process of cement paste in sulfate environment	158-166
Mukharjee, Bibhuti Bhusan / Barai, Sudhirkumar V.	Influence of incorporation of nano-silica and recycled aggregates on compressive strength and microstructure of concrete	570-578
Cardone, F. / Ferrotti, G. / Frigio, F. / Canestrari, F.	Influence of polymer modification on asphalt binder dynamic and steady flow viscosities	435-443
Xuan, D. X. / Schlangen, E. / Molenaar, A. A. A. / Houben, L. J. M.	Influence of quality and variation of recycled masonry aggregates on failure behavior of cement treated demolition waste	521-527
Zaumanis, Martins / Mallick, Rajib B. / Poulikakos, Lily / Frank, Robert	Influence of six rejuvenators on the performance properties of Reclaimed Asphalt Pavement (RAP) binder and 100% recycled asphalt mixtures	538-550
Pedro, D. / de Brito, J. / Evangelista, L.	Influence of the use of recycled concrete aggregates from different sources on structural concrete	141-151
Hernández Noguera, Jesús Alfredo / Rondón Quintana, Hugo Alexander / Fernández Gómez, Wilmar Darío	The influence of water on the oxidation of asphalt cements	451-455
Knop, Yaniv / Peled, Alva / Cohen, Ronen	Influences of limestone particle size distributions and contents on blended cement properties	26-34
Maskell, Daniel / Heath, Andrew / Walker, Pete	Inorganic stabilisation methods for extruded earth masonry units	602-609
Anwar, Mochammad Syaiful / Sujitha, B. / Vedalakshmi, R.	Light-weight cementitious conductive anode for impressed current cathodic protection of steel reinforced concrete application	167-180
Wang, Wenjing / Zhao, Lin / Liu, Yuanzhen / Li, Zhu	Mechanical properties and stress–strain relationship in axial compression for concrete with added glazed hollow beads and construction waste	425-434
Fakharifar, Mostafa / Dalvand, Ahmad / Arezoumandi, Mahdi / Sharbatdar, Mohammad K. / Chen, Genda / Kheyroddin, Ali	Mechanical properties of high performance fiber reinforced cementitious composites	510-520
Hu, Chuanlin / Li, Zongjin	Micromechanical investigation of Portland cement paste	44-52
Santos, Salomé dos / Partl, Manfred N. / Poulikakos, Lily D.	Newly observed effects of water on the microstructures of bitumen surface	618-627
Karahancer, Sebnem Sargin / Kiristi, Melek / Terzi, Serdal / Saltan, Mehmet / Oksuz, Aysegul Uygun / Oksuz, Lutfi	Performance evaluation of nano-modified asphalt concrete	283-288
Ren, Junping / Ma, Biao / Si, Wei / Zhou, Xueyan / Li, Chao	Preparation and analysis of composite phase change material used in asphalt mixture by sol–gel method	53-62
Ledesma, E. F. / Jiménez, J. R. / Fernández, J. M. / Galvin, A. P. / Agrela, F. / Barbudo, A.	Properties of masonry mortars manufactured with fine recycled concrete aggregates	289-298
Williams Portal, Natalie / Fernandez Perez, Ignasi / Nyholm Thrane, Lars / Lundgren, Karin	Pull-out of textile reinforcement in concrete	63-71
Wei, Jianming / Dong, Fuqiang / Li, Yanan / Zhang, Yuzhen	Relationship analysis between surface free energy and chemical composition of asphalt binder	116-123
Liu, Shutang / Cao, Weidong / Qi, Xinlong / Ren, Shengjun	Research and application of statistical law of VCA formed from the packing of basalt coarse aggregates	484-491
Peng, Jianwei / Deng, Dehua / Liu, Zanqun / Yuan, Qiang / Ye, Tao	Rheological models for fresh cement asphalt paste	254-262
Lee, Yong-Soo / Ryou, Jae-Suk	Self healing behavior for crack closing of expansive agent via granulation/film coating method	188-193
Xiao, Jianzhuang / Li, Zhiwei / Li, Jiabin	Shear transfer across a crack in high-strength concrete after elevated temperatures	472-483
Horpibulsuk, Suksun / Munsrakest, Varagorn / Udomchai, Artit / Chinkulkijniwat, Avirut / Arulrajah, Arul	Strength of sustainable non-bearing masonry units manufactured from calcium carbide residue and fly ash	210-215
Lim, Jian C. / Ozbakkaloglu, Togay	Stress–strain model for normal- and light-weight concretes under uniaxial and triaxial compression	492-509
Limbachiya, Mukesh / Bostanci, Sevket Can / Kew, Hsein	Suitability of BS EN 197-1 CEM II and CEM V cement for production of low carbon concrete	397-405
Ye, Qian / Shen, Chengjin / Sun, Shu / Chen, Rui / Song, Hongjian	The sulfate corrosion resistance behavior of slag cement mortar	202-209
Yan, Jinhai / Zhu, Haoran / Zhang, Zhixiang / Gao, Lei / Charmot, Stephane	The theoretical analysis of the RAP aged asphalt influence on the performance of asphalt emulsion cold recycled mixes	444-450
Yoshitake, By Isamu / Wong, Howe / Ishida, Takeo / Nassif, Ayman Y.	Thermal stress of high volume fly-ash (HVFA) concrete made with limestone aggregate	216-225
Núñez-Nieto, X. / Solla, M. / Novo, A. / Lorenzo, H.	Three-dimensional ground-penetrating radar methodologies for the characterization and volumetric reconstruction of underground tunneling	551-560
Liu, Quantao / Yu, Wan / Schlangen, Erik / van Bochove, Gerbert	Unravelling porous asphalt concrete with induction heating	152-157
Soares, D. / de Brito, J. / Ferreira, J. / Pacheco, J.	Use of coarse recycled aggregates from precast concrete rejects: Mechanical and durability performance	263-272
Bondar, Dali / Coakley, Eoin	Use of gypsum and CKD to enhance early age strength of High Volume Fly Ash (HVFA) pastes	93-108
Muñoz, P. / Morales, M. P. / Mendívil, M. A. / Juárez, M. C. / Muñoz, L.	Using of waste pomace from winery industry to improve thermal insulation of fired clay bricks. Eco-friendly way of building construction	181-187

About this
data sheet
IssueID
22547
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - November 2014

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - November 2014

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.