Construction and Building Materials - November 2014

Erschienen:	November 2014

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Cong, Ma / Longzhu, Chen / Bing, Chen	Analysis of strength development in soft clay stabilized with cement-based stabilizer	354-362
Azari, Hoda / Nazarian, Soheil / Yuan, Deren	Assessing sensitivity of impact echo and ultrasonic surface waves methods for nondestructive evaluation of concrete structures	384-391
Trivedi, N. / Singh, R. K.	Assessment of in-situ concrete creep: Cylindrical specimen and prototype nuclear containment structure	16-25
Saca, Nastasia / Georgescu, Maria	Behavior of ternary blended cements containing limestone filler and fly ash in magnesium sulfate solution at low temperature	246-253
Karakaş, Ahmet Sertaç / Sayin, Baris / Kuloğlu, Necati	The changes in the mechanical properties of neat and SBS-modified HMA pavements due to traffic loads and environmental effects over a one-year period	406-415
Chen, G. M. / He, Y. H. / Yang, H. / Chen, J. F. / Guo, Y. C.	Compressive behavior of steel fiber reinforced recycled aggregate concrete after exposure to elevated temperatures	1-15
Siva Chidambaram, R. / Agarwal, Pankaj	The confining effect of geo-grid on the mechanical properties of concrete specimens with steel fiber under compression and flexure	628-637
Keskin, Suleyman Bahadir / Şahmaran, Mustafa / Yaman, İsmail Özgür / Lachemi, Mohamed	Correlation between the viscoelastic properties and cracking potential of engineered cementitious composites	375-383
Sanmartín, Patricia / Cappitelli, Francesca / Mitchell, Ralph	Current methods of graffiti removal: A review	363-374
Matyščák, Ondřej / Ottosen, L. M. / Rörig-Dalgaard, Inge	Desalination of salt damaged Obernkirchen sandstone by an applied DC field	561-569
Xavier, J. / Oliveira, M. / Morais, J. J. L. / de Moura, M. F. S. F.	Determining mode II cohesive law of Pinus pinaster by combining the end-notched flexure test with digital image correlation	109-115
Tennakoon, Chandani / Nazari, Ali / Sanjayan, Jay G. / Sagoe-Crentsil, Kwesi	Distribution of oxides in fly ash controls strength evolution of geopolymers	72-82
Makhloufi, Z. / Bouziani, T. / Hadjoudja, M. / Bederina, M.	Durability of limestone mortars based on quaternary binders subjected to sulfuric acid using drying–immersion cycles	579-588
Espersson, Maria	Effect in the high modulus asphalt concrete with the temperature	638-643
Salman, Muhammad / Cizer, Özlem / Pontikes, Yiannis / Vandewalle, Lucie / Blanpain, Bart / Van Balen, Koen	Effect of curing temperatures on the alkali activation of crystalline continuous casting stainless steel slag	308-316
Li, Shiwei / Gao, Bo / Tu, Ganfeng / Hu, Liang / Sun, Shuchen / Zhu, Guanglin / Yin, Shaohua	Effects of magnesium on the microstructure and corrosion resistance of Zn–55Al–1.6Si coating	124-131
Chen, Chun-Tao / Chang, Jiang-jhy / Yeih, Wei-chung	The effects of specimen parameters on the resistivity of concrete	35-43
Ozawa, Mitsuo / Morimoto, Hiroaki	Effects of various fibres on high-temperature spalling in high-performance concrete	83-92
Maes, Mathias / Van Tittelboom, Kim / De Belie, Nele	The efficiency of self-healing cementitious materials by means of encapsulated polyurethane in chloride containing environments	528-537
Ma, Hongyan / Hou, Dongshuai / Liu, Jun / Li, Zongjin	Estimate the relative electrical conductivity of C–S–H gel from experimental results	392-396
Boubekeur, Toufik / Ezziane, Karim / Kadri, El-Hadj	Estimation of mortars compressive strength at different curing temperature by the maturity method	299-307
Zerbino, R. / Giaccio, G. / Marfil, S.	Evaluation of alkali–silica reaction in concretes with natural rice husk ash using optical microscopy	132-140
Yu, Bin / Jiao, Liya / Ni, Fujian / Yang, Jun	Evaluation of plastic–rubber asphalt: Engineering property and environmental concern	416-424
Agarwal, Atul / Nanda, Bharadwaj / Maity, Damodar	Experimental investigation on chemically treated bamboo reinforced concrete beams and columns	610-617
Li, Fumin / Liu, Zhenguo / Zhao, Yu / Qu, Yaxu / Lu, Rong	Experimental study on corrosion progress of interior bond section of anchor cables under chloride attack	344-353
Jimma, Betiglu E. / Rangaraju, Prasada Rao	Film-forming ability of flowable cement pastes and its application in mixture proportioning of pervious concrete	273-282
Osei-Antwi, Michael / De Castro, Julia / Vassilopoulos, Anastasios P. / Keller, Thomas	Fracture in complex balsa cores of fiber-reinforced polymer sandwich structures	194-201
Magallanes-Rivera, R. X. / Escalante-García, J. I.	Hemihydrate or waste anhydrite in composite binders with blast-furnace slag: Hydration products, microstructures and dimensional stability	317-326
Kim, H. K. / Jang, J. G. / Choi, Y. C. / Lee, H. K.	Improved chloride resistance of high-strength concrete amended with coal bottom ash for internal curing	334-343
Tong, Yuping / Zhao, Shunbo / Ma, Juntao / Wang, Lei / Zhang, Yanan / Gao, Yafeng / Xie, Yi Min	Improving cracking and drying shrinkage properties of cement mortar by adding chemically treated luffa fibres	327-333
Soares, D. / de Brito, J. / Ferreira, J. / Pacheco, J.	In situ materials characterization of full-scale recycled aggregates concrete structures	237-245
Mohammadi, Iman / Khabbaz, Hadi / Vessalas, Kirk	In-depth assessment of Crumb Rubber Concrete (CRC) prepared by water-soaking treatment method for rigid pavements	456-471
Srubar, Wil V. / Miller, Sabbie A. / Lepech, Michael D. / Billington, Sarah L.	Incorporating spatiotemporal effects and moisture diffusivity into a multi-criteria materials selection methodology for wood–polymer composites	589-601
da Silva, Alexandra M. / de Brito, Jorge / Veiga, Rosário	Incorporation of fine plastic aggregates in rendering mortars	226-236
Xiong, Chuansheng / Jiang, Linhua / Song, Zijian / Liu, Rong / You, Lushen / Chu, Hongqiang	Influence of cation type on deterioration process of cement paste in sulfate environment	158-166
Mukharjee, Bibhuti Bhusan / Barai, Sudhirkumar V.	Influence of incorporation of nano-silica and recycled aggregates on compressive strength and microstructure of concrete	570-578
Cardone, F. / Ferrotti, G. / Frigio, F. / Canestrari, F.	Influence of polymer modification on asphalt binder dynamic and steady flow viscosities	435-443
Xuan, D. X. / Schlangen, E. / Molenaar, A. A. A. / Houben, L. J. M.	Influence of quality and variation of recycled masonry aggregates on failure behavior of cement treated demolition waste	521-527
Zaumanis, Martins / Mallick, Rajib B. / Poulikakos, Lily / Frank, Robert	Influence of six rejuvenators on the performance properties of Reclaimed Asphalt Pavement (RAP) binder and 100% recycled asphalt mixtures	538-550
Pedro, D. / de Brito, J. / Evangelista, L.	Influence of the use of recycled concrete aggregates from different sources on structural concrete	141-151
Hernández Noguera, Jesús Alfredo / Rondón Quintana, Hugo Alexander / Fernández Gómez, Wilmar Darío	The influence of water on the oxidation of asphalt cements	451-455
Knop, Yaniv / Peled, Alva / Cohen, Ronen	Influences of limestone particle size distributions and contents on blended cement properties	26-34
Maskell, Daniel / Heath, Andrew / Walker, Pete	Inorganic stabilisation methods for extruded earth masonry units	602-609
Anwar, Mochammad Syaiful / Sujitha, B. / Vedalakshmi, R.	Light-weight cementitious conductive anode for impressed current cathodic protection of steel reinforced concrete application	167-180
Wang, Wenjing / Zhao, Lin / Liu, Yuanzhen / Li, Zhu	Mechanical properties and stress–strain relationship in axial compression for concrete with added glazed hollow beads and construction waste	425-434
Fakharifar, Mostafa / Dalvand, Ahmad / Arezoumandi, Mahdi / Sharbatdar, Mohammad K. / Chen, Genda / Kheyroddin, Ali	Mechanical properties of high performance fiber reinforced cementitious composites	510-520
Hu, Chuanlin / Li, Zongjin	Micromechanical investigation of Portland cement paste	44-52
Santos, Salomé dos / Partl, Manfred N. / Poulikakos, Lily D.	Newly observed effects of water on the microstructures of bitumen surface	618-627
Karahancer, Sebnem Sargin / Kiristi, Melek / Terzi, Serdal / Saltan, Mehmet / Oksuz, Aysegul Uygun / Oksuz, Lutfi	Performance evaluation of nano-modified asphalt concrete	283-288
Ren, Junping / Ma, Biao / Si, Wei / Zhou, Xueyan / Li, Chao	Preparation and analysis of composite phase change material used in asphalt mixture by sol–gel method	53-62
Ledesma, E. F. / Jiménez, J. R. / Fernández, J. M. / Galvin, A. P. / Agrela, F. / Barbudo, A.	Properties of masonry mortars manufactured with fine recycled concrete aggregates	289-298
Williams Portal, Natalie / Fernandez Perez, Ignasi / Nyholm Thrane, Lars / Lundgren, Karin	Pull-out of textile reinforcement in concrete	63-71
Wei, Jianming / Dong, Fuqiang / Li, Yanan / Zhang, Yuzhen	Relationship analysis between surface free energy and chemical composition of asphalt binder	116-123
Liu, Shutang / Cao, Weidong / Qi, Xinlong / Ren, Shengjun	Research and application of statistical law of VCA formed from the packing of basalt coarse aggregates	484-491
Peng, Jianwei / Deng, Dehua / Liu, Zanqun / Yuan, Qiang / Ye, Tao	Rheological models for fresh cement asphalt paste	254-262
Lee, Yong-Soo / Ryou, Jae-Suk	Self healing behavior for crack closing of expansive agent via granulation/film coating method	188-193
Xiao, Jianzhuang / Li, Zhiwei / Li, Jiabin	Shear transfer across a crack in high-strength concrete after elevated temperatures	472-483
Horpibulsuk, Suksun / Munsrakest, Varagorn / Udomchai, Artit / Chinkulkijniwat, Avirut / Arulrajah, Arul	Strength of sustainable non-bearing masonry units manufactured from calcium carbide residue and fly ash	210-215
Lim, Jian C. / Ozbakkaloglu, Togay	Stress–strain model for normal- and light-weight concretes under uniaxial and triaxial compression	492-509
Limbachiya, Mukesh / Bostanci, Sevket Can / Kew, Hsein	Suitability of BS EN 197-1 CEM II and CEM V cement for production of low carbon concrete	397-405
Ye, Qian / Shen, Chengjin / Sun, Shu / Chen, Rui / Song, Hongjian	The sulfate corrosion resistance behavior of slag cement mortar	202-209
Yan, Jinhai / Zhu, Haoran / Zhang, Zhixiang / Gao, Lei / Charmot, Stephane	The theoretical analysis of the RAP aged asphalt influence on the performance of asphalt emulsion cold recycled mixes	444-450
Yoshitake, By Isamu / Wong, Howe / Ishida, Takeo / Nassif, Ayman Y.	Thermal stress of high volume fly-ash (HVFA) concrete made with limestone aggregate	216-225
Núñez-Nieto, X. / Solla, M. / Novo, A. / Lorenzo, H.	Three-dimensional ground-penetrating radar methodologies for the characterization and volumetric reconstruction of underground tunneling	551-560
Liu, Quantao / Yu, Wan / Schlangen, Erik / van Bochove, Gerbert	Unravelling porous asphalt concrete with induction heating	152-157
Soares, D. / de Brito, J. / Ferreira, J. / Pacheco, J.	Use of coarse recycled aggregates from precast concrete rejects: Mechanical and durability performance	263-272
Bondar, Dali / Coakley, Eoin	Use of gypsum and CKD to enhance early age strength of High Volume Fly Ash (HVFA) pastes	93-108
Muñoz, P. / Morales, M. P. / Mendívil, M. A. / Juárez, M. C. / Muñoz, L.	Using of waste pomace from winery industry to improve thermal insulation of fired clay bricks. Eco-friendly way of building construction	181-187

Über diese
Datenseite
IssueID
22547
Veröffentlicht am:
15.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - November 2014

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - November 2014

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.