Construction and Building Materials - November 2014

Published:	November 2014

Articles in this Issue

Author(s)	Title	Page(s)
Sun, Lu / Wang, Yuanyuan / Zhang, Yongming	Aging mechanism and effective recycling ratio of SBS modified asphalt	26-35
Anwar Parvez, M. / Al-Abdul Wahhab, Hamad I. / Shawabkeh, Reyad A. / Hussein, Ibnelwaleed A.	Asphalt modification using acid treated waste oil fly ash	201-209
Wang, Xuhao / Wang, Kejin / Taylor, Peter / Morcous, George	Assessing particle packing based self-consolidating concrete mix design method	439-452
Mobasher, Barzin / Bakhshi, Mehdi / Barsby, Christopher	Backcalculation of residual tensile strength of regular and high performance fiber reinforced concrete from flexural tests	243-253
Heikal, Mohamed / Ali, A. I. / Ismail, M. N. / Ibrahim, S. Awad N. S.	Behavior of composite cement pastes containing silica nano-particles at elevated temperature	339-350
Blom, J. / El Kadi, M. / Wastiels, J. / Aggelis, D. G.	Bending fracture of textile reinforced cement laminates monitored by acoustic emission: Influence of aspect ratio	370-378
Al-Mahmoud, Firas / Mechling, Jean-Michel / Shaban, Mohamed	Bond strength of different strengthening systems – Concrete elements under freeze–thaw cycles and salt water immersion exposure	399-409
Nazari, Ali / Maghsoudpour, Ali / Sanjayan, Jay G.	Characteristics of boroaluminosilicate geopolymers	262-268
Yang, Chuanmeng / Cui, Chong / Qin, Juan / Cui, Xiaoyu	Characteristics of the fired bricks with low-silicon iron tailings	36-42
Soliman, Haithem / Shalaby, Ahmed	Characterizing the performance of cementitious partial-depth repair materials in cold climates	148-157
Sánchez-Aparicio, Luis Javier / Riveiro, Belén / González-Aguilera, Diego / Ramos, Luís F.	The combination of geomatic approaches and operational modal analysis to improve calibration of finite element models: A case of study in Saint Torcato Church (Guimarães, Portugal)	118-129
Nematollahi, Behzad / Sanjayan, Jay / Shaikh, Faiz Uddin Ahmed	Comparative deflection hardening behavior of short fiber reinforced geopolymer composites	54-64
Mardani-Aghabaglou, Ali / İnan Sezer, Gözde / Ramyar, Kambiz	Comparison of fly ash, silica fume and metakaolin from mechanical properties and durability performance of mortar mixtures view point	17-25
Mostofinejad, Davood / Ilia, Elaheh	Confining of square RC columns with FRP sheets using corner strip–batten technique	269-278
Hmidan, Amer / Kim, Yail J. / Yazdani, Siamak	Correction factors for stress intensity of CFRP-strengthened wide-flange steel beams with various crack configurations	522-530
Fei, Fei-long / Hu, Jie / Wei, Jiang-xiong / Yu, Qi-jun / Chen, Zheng-shan	Corrosion performance of steel reinforcement in simulated concrete pore solutions in the presence of imidazoline quaternary ammonium salt corrosion inhibitor	43-53
Xie, You-jun / Fu, Qiang / Long, Guang-cheng / Zheng, Ke-ren / Song, Hao	Creep properties of cement and asphalt mortar	9-16
de Freitas, Sara S. / de Freitas, Vasco P. / Barreira, Eva	Detection of façade plaster detachments using infrared thermography – A nondestructive technique	80-87
Xie, You-jun / Fu, Qiang / Zheng, Ke-ren / Yuan, Qiang / Song, Hao	Dynamic mechanical properties of cement and asphalt mortar based on SHPB test	217-225
Wang, Chao-qiang / Tan, Ke-feng / Xu, Xiu-xia / Wang, Pei-xin	Effect of activators, admixtures and temperature on the early hydration performance of desulfurization ash	322-331
Ludovico-Marques, Marco / Chastre, Carlos	Effect of consolidation treatments on mechanical behaviour of sandstone	473-482
Asamoto, Shingo / Kato, Kyosuke / Maki, Takeshi	Effect of creep induction at an early age on subsequent prestress loss and structural response of prestressed concrete beam	158-164
Ginouse, Nicolas / Jolin, Marc / Bissonnette, Benoît	Effect of equipment on spray velocity distribution in shotcrete applications	362-369
Canbaz, Mehmet	The effect of high temperature on reactive powder concrete	508-513
Adak, D. / Sarkar, M. / Mandal, S.	Effect of nano-silica on strength and durability of fly ash based geopolymer mortar	453-459
Tkaczewska, E.	Effect of the superplasticizer type on the properties of the fly ash blended cement	388-393
Ganesh Prabhu, G. / Hyun, Jung Hwan / Kim, Yun Yong	Effects of foundry sand as a fine aggregate in concrete production	514-521
Li, Zunrou / Pan, Zhu / Liu, Yang / He, Li / Duan, Wenhui / Collins, Frank / Sanjayan, Jay	Effects of mineral admixtures and lime on disintegration of alkali-activated slag exposed to 50°C	254-261
Adjoudj, M'hamed / Ezziane, Karim / Kadri, El Hadj / Ngo, Tien-Tung / Kaci, Abdelhak	Evaluation of rheological parameters of mortar containing various amounts of mineral addition with polycarboxylate superplasticizer	549-559
Shafiei, A. / Latifi Namin, M.	Experimental investigation on the effect of hydrated lime on mechanical properties of SMA	379-387
Vidya Sagar, R. / Rao, M. V. M. S.	An experimental study on loading rate effect on acoustic emission based b-values related to reinforced concrete fracture	460-472
Rashad, Alaa M.	An exploratory study on alkali-activated slag blended with quartz powder under the effect of thermal cyclic loads and thermal shock cycles	165-174
Onoue, Kozo / Tokitsu, Masateru / Ohtsu, Masayasu / Bier, Thomas A.	Fatigue characteristics of steel-making slag concrete under compression in submerged condition	231-242
Hu, Yu / Luo, Danni / Li, Penghui / Li, Qingbin / Sun, Guoqiang	Fracture toughness enhancement of cement paste with multi-walled carbon nanotubes	332-338
Bernal Camacho, J. / Mahmoud Abdelkader, S. / Reyes Pozo, E. / Moragues Terrades, A.	The influence of ion chloride on concretes made with sulfate-resistant cements and mineral admixtures	483-493
Cuenca-Moyano, G. M. / Martín-Morales, M. / Valverde-Palacios, I. / Valverde-Espinosa, I. / Zamorano, M.	Influence of pre-soaked recycled fine aggregate on the properties of masonry mortar	71-79
Kim, Hoon / Tanabe, Shin-ichi	Influence of sorption area ratio and test method on formaldehyde reduction performance for sorptive building materials	175-182
Jo, Byung Wan / Chakraborty, Sumit / Kim, Ki Heon	Investigation on the effectiveness of chemically synthesized nano cement in controlling the physical and mechanical performances of concrete	1-8
Shen, Weiguo / Zhang, Chuan / Yang, Zhifeng / Cao, Liu / Yang, Zhenguo / Tian, Bo	Investigation on the safety concrete for highway crash barrier	394-398
Li, Jiusu / Oh, Jeongho / Naik, Bhaven / Simate, Geoffrey S. / Walubita, Lubinda F.	Laboratory characterization of cracking-resistance potential of asphalt mixes using overlay tester	130-140
Condeixa, Karina / Haddad, Assed / Boer, Dieter	Life Cycle Impact Assessment of masonry system as inner walls: A case study in Brazil	141-147
Laaroussi, N. / Lauriat, G. / Garoum, M. / Cherki, A. / Jannot, Y.	Measurement of thermal properties of brick materials based on clay mixtures	351-361
Shen, Lin / Bahrami Jovein, Hamed / Li, Mo	Measuring static stability and robustness of self-consolidating concrete using modified Segregation Probe	210-216
Shaikh, Faiz U. A. / Supit, Steve W. M.	Mechanical and durability properties of high volume fly ash (HVFA) concrete containing calcium carbonate (CaCO3) nanoparticles	309-321
Li, Lijuan / Ruan, Shenghua / Zeng, Lan	Mechanical properties and constitutive equations of concrete containing a low volume of tire rubber particles	291-308
Rozenbaum, O. / Anne, S. / Rouet, J.-L.	Modification and modeling of water ingress in limestone after application of a biocalcification treatment	97-103
Bertolesi, Elisa / Carozzi, Francesca Giulia / Milani, Gabriele / Poggi, Carlo	Numerical modeling of Fabric Reinforce Cementitious Matrix composites (FRCM) in tension	531-548
Yeon, Jun-Oh / Kim, Kyoung-Woo / Yang, Kwan-Seop / Kim, Jea-Min / Kim, Myung-Jun	Physical properties of cellulose sound absorbers produced using recycled paper	494-500
Pujadas, P. / Blanco, A. / Cavalaro, S. H. P. / Aguado, A. / Grünewald, S. / Blom, K. / Walraven, J. C.	Plastic fibres as the only reinforcement for flat suspended slabs: Parametric study and design considerations	88-96
Ge, Yu / Elshafie, Mohammed Z. E. B. / Dirar, Samir / Middleton, Campbell R.	The response of embedded strain sensors in concrete beams subjected to thermal loading	279-290
Ali, Majid	Seismic performance of coconut-fibre-reinforced-concrete columns with different reinforcement configurations of coconut-fibre ropes	226-230
Baltazar, Liliana / Santana, João / Lopes, Beatriz / Rodrigues, M. Paula / Correia, João R.	Surface skin protection of concrete with silicate-based impregnations: Influence of the substrate roughness and moisture	191-200
Mounir, Soumia / Maaloufa, Youssef / Cherki, Abou bakr / Khabbazi, Abdelhamid	Thermal properties of the composite material clay/granular cork	183-190
Tang, Fujian / Lin, Zhibin / Chen, Genda / Yi, Weijian	Three-dimensional corrosion pit measurement and statistical mechanical degradation analysis of deformed steel bars subjected to accelerated corrosion	104-117
Liu, Qing-feng / Xia, Jin / Easterbrook, Dave / Yang, Jian / Li, Long-yuan	Three-phase modelling of electrochemical chloride removal from corroded steel-reinforced concrete	410-427
Moreno-Navarro, F. / Sol-Sánchez, M. / Rubio-Gámez, M. C. / Segarra-Martínez, M.	The use of additives for the improvement of the mechanical behavior of high modulus asphalt mixes	65-70
Chabannes, Morgan / Bénézet, Jean-Charles / Clerc, Laurent / Garcia-Diaz, Eric	Use of raw rice husk as natural aggregate in a lightweight insulating concrete: An innovative application	428-438
Tsai, Chia-Jung / Huang, Ran / Lin, Wei-Ting / Chiang, Hsiang-Wei	Using GGBOS as the alkali activators in GGBS and GGBOS blended cements	501-507

About this
data sheet
IssueID
22546
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - November 2014

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - November 2014

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.