Construction and Building Materials - novembre 2014

Publié:	novembre 2014

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Sun, Lu / Wang, Yuanyuan / Zhang, Yongming	Aging mechanism and effective recycling ratio of SBS modified asphalt	26-35
Anwar Parvez, M. / Al-Abdul Wahhab, Hamad I. / Shawabkeh, Reyad A. / Hussein, Ibnelwaleed A.	Asphalt modification using acid treated waste oil fly ash	201-209
Wang, Xuhao / Wang, Kejin / Taylor, Peter / Morcous, George	Assessing particle packing based self-consolidating concrete mix design method	439-452
Mobasher, Barzin / Bakhshi, Mehdi / Barsby, Christopher	Backcalculation of residual tensile strength of regular and high performance fiber reinforced concrete from flexural tests	243-253
Heikal, Mohamed / Ali, A. I. / Ismail, M. N. / Ibrahim, S. Awad N. S.	Behavior of composite cement pastes containing silica nano-particles at elevated temperature	339-350
Blom, J. / El Kadi, M. / Wastiels, J. / Aggelis, D. G.	Bending fracture of textile reinforced cement laminates monitored by acoustic emission: Influence of aspect ratio	370-378
Al-Mahmoud, Firas / Mechling, Jean-Michel / Shaban, Mohamed	Bond strength of different strengthening systems – Concrete elements under freeze–thaw cycles and salt water immersion exposure	399-409
Nazari, Ali / Maghsoudpour, Ali / Sanjayan, Jay G.	Characteristics of boroaluminosilicate geopolymers	262-268
Yang, Chuanmeng / Cui, Chong / Qin, Juan / Cui, Xiaoyu	Characteristics of the fired bricks with low-silicon iron tailings	36-42
Soliman, Haithem / Shalaby, Ahmed	Characterizing the performance of cementitious partial-depth repair materials in cold climates	148-157
Sánchez-Aparicio, Luis Javier / Riveiro, Belén / González-Aguilera, Diego / Ramos, Luís F.	The combination of geomatic approaches and operational modal analysis to improve calibration of finite element models: A case of study in Saint Torcato Church (Guimarães, Portugal)	118-129
Nematollahi, Behzad / Sanjayan, Jay / Shaikh, Faiz Uddin Ahmed	Comparative deflection hardening behavior of short fiber reinforced geopolymer composites	54-64
Mardani-Aghabaglou, Ali / İnan Sezer, Gözde / Ramyar, Kambiz	Comparison of fly ash, silica fume and metakaolin from mechanical properties and durability performance of mortar mixtures view point	17-25
Mostofinejad, Davood / Ilia, Elaheh	Confining of square RC columns with FRP sheets using corner strip–batten technique	269-278
Hmidan, Amer / Kim, Yail J. / Yazdani, Siamak	Correction factors for stress intensity of CFRP-strengthened wide-flange steel beams with various crack configurations	522-530
Fei, Fei-long / Hu, Jie / Wei, Jiang-xiong / Yu, Qi-jun / Chen, Zheng-shan	Corrosion performance of steel reinforcement in simulated concrete pore solutions in the presence of imidazoline quaternary ammonium salt corrosion inhibitor	43-53
Xie, You-jun / Fu, Qiang / Long, Guang-cheng / Zheng, Ke-ren / Song, Hao	Creep properties of cement and asphalt mortar	9-16
de Freitas, Sara S. / de Freitas, Vasco P. / Barreira, Eva	Detection of façade plaster detachments using infrared thermography – A nondestructive technique	80-87
Xie, You-jun / Fu, Qiang / Zheng, Ke-ren / Yuan, Qiang / Song, Hao	Dynamic mechanical properties of cement and asphalt mortar based on SHPB test	217-225
Wang, Chao-qiang / Tan, Ke-feng / Xu, Xiu-xia / Wang, Pei-xin	Effect of activators, admixtures and temperature on the early hydration performance of desulfurization ash	322-331
Ludovico-Marques, Marco / Chastre, Carlos	Effect of consolidation treatments on mechanical behaviour of sandstone	473-482
Asamoto, Shingo / Kato, Kyosuke / Maki, Takeshi	Effect of creep induction at an early age on subsequent prestress loss and structural response of prestressed concrete beam	158-164
Ginouse, Nicolas / Jolin, Marc / Bissonnette, Benoît	Effect of equipment on spray velocity distribution in shotcrete applications	362-369
Canbaz, Mehmet	The effect of high temperature on reactive powder concrete	508-513
Adak, D. / Sarkar, M. / Mandal, S.	Effect of nano-silica on strength and durability of fly ash based geopolymer mortar	453-459
Tkaczewska, E.	Effect of the superplasticizer type on the properties of the fly ash blended cement	388-393
Ganesh Prabhu, G. / Hyun, Jung Hwan / Kim, Yun Yong	Effects of foundry sand as a fine aggregate in concrete production	514-521
Li, Zunrou / Pan, Zhu / Liu, Yang / He, Li / Duan, Wenhui / Collins, Frank / Sanjayan, Jay	Effects of mineral admixtures and lime on disintegration of alkali-activated slag exposed to 50°C	254-261
Adjoudj, M'hamed / Ezziane, Karim / Kadri, El Hadj / Ngo, Tien-Tung / Kaci, Abdelhak	Evaluation of rheological parameters of mortar containing various amounts of mineral addition with polycarboxylate superplasticizer	549-559
Shafiei, A. / Latifi Namin, M.	Experimental investigation on the effect of hydrated lime on mechanical properties of SMA	379-387
Vidya Sagar, R. / Rao, M. V. M. S.	An experimental study on loading rate effect on acoustic emission based b-values related to reinforced concrete fracture	460-472
Rashad, Alaa M.	An exploratory study on alkali-activated slag blended with quartz powder under the effect of thermal cyclic loads and thermal shock cycles	165-174
Onoue, Kozo / Tokitsu, Masateru / Ohtsu, Masayasu / Bier, Thomas A.	Fatigue characteristics of steel-making slag concrete under compression in submerged condition	231-242
Hu, Yu / Luo, Danni / Li, Penghui / Li, Qingbin / Sun, Guoqiang	Fracture toughness enhancement of cement paste with multi-walled carbon nanotubes	332-338
Bernal Camacho, J. / Mahmoud Abdelkader, S. / Reyes Pozo, E. / Moragues Terrades, A.	The influence of ion chloride on concretes made with sulfate-resistant cements and mineral admixtures	483-493
Cuenca-Moyano, G. M. / Martín-Morales, M. / Valverde-Palacios, I. / Valverde-Espinosa, I. / Zamorano, M.	Influence of pre-soaked recycled fine aggregate on the properties of masonry mortar	71-79
Kim, Hoon / Tanabe, Shin-ichi	Influence of sorption area ratio and test method on formaldehyde reduction performance for sorptive building materials	175-182
Jo, Byung Wan / Chakraborty, Sumit / Kim, Ki Heon	Investigation on the effectiveness of chemically synthesized nano cement in controlling the physical and mechanical performances of concrete	1-8
Shen, Weiguo / Zhang, Chuan / Yang, Zhifeng / Cao, Liu / Yang, Zhenguo / Tian, Bo	Investigation on the safety concrete for highway crash barrier	394-398
Li, Jiusu / Oh, Jeongho / Naik, Bhaven / Simate, Geoffrey S. / Walubita, Lubinda F.	Laboratory characterization of cracking-resistance potential of asphalt mixes using overlay tester	130-140
Condeixa, Karina / Haddad, Assed / Boer, Dieter	Life Cycle Impact Assessment of masonry system as inner walls: A case study in Brazil	141-147
Laaroussi, N. / Lauriat, G. / Garoum, M. / Cherki, A. / Jannot, Y.	Measurement of thermal properties of brick materials based on clay mixtures	351-361
Shen, Lin / Bahrami Jovein, Hamed / Li, Mo	Measuring static stability and robustness of self-consolidating concrete using modified Segregation Probe	210-216
Shaikh, Faiz U. A. / Supit, Steve W. M.	Mechanical and durability properties of high volume fly ash (HVFA) concrete containing calcium carbonate (CaCO3) nanoparticles	309-321
Li, Lijuan / Ruan, Shenghua / Zeng, Lan	Mechanical properties and constitutive equations of concrete containing a low volume of tire rubber particles	291-308
Rozenbaum, O. / Anne, S. / Rouet, J.-L.	Modification and modeling of water ingress in limestone after application of a biocalcification treatment	97-103
Bertolesi, Elisa / Carozzi, Francesca Giulia / Milani, Gabriele / Poggi, Carlo	Numerical modeling of Fabric Reinforce Cementitious Matrix composites (FRCM) in tension	531-548
Yeon, Jun-Oh / Kim, Kyoung-Woo / Yang, Kwan-Seop / Kim, Jea-Min / Kim, Myung-Jun	Physical properties of cellulose sound absorbers produced using recycled paper	494-500
Pujadas, P. / Blanco, A. / Cavalaro, S. H. P. / Aguado, A. / Grünewald, S. / Blom, K. / Walraven, J. C.	Plastic fibres as the only reinforcement for flat suspended slabs: Parametric study and design considerations	88-96
Ge, Yu / Elshafie, Mohammed Z. E. B. / Dirar, Samir / Middleton, Campbell R.	The response of embedded strain sensors in concrete beams subjected to thermal loading	279-290
Ali, Majid	Seismic performance of coconut-fibre-reinforced-concrete columns with different reinforcement configurations of coconut-fibre ropes	226-230
Baltazar, Liliana / Santana, João / Lopes, Beatriz / Rodrigues, M. Paula / Correia, João R.	Surface skin protection of concrete with silicate-based impregnations: Influence of the substrate roughness and moisture	191-200
Mounir, Soumia / Maaloufa, Youssef / Cherki, Abou bakr / Khabbazi, Abdelhamid	Thermal properties of the composite material clay/granular cork	183-190
Tang, Fujian / Lin, Zhibin / Chen, Genda / Yi, Weijian	Three-dimensional corrosion pit measurement and statistical mechanical degradation analysis of deformed steel bars subjected to accelerated corrosion	104-117
Liu, Qing-feng / Xia, Jin / Easterbrook, Dave / Yang, Jian / Li, Long-yuan	Three-phase modelling of electrochemical chloride removal from corroded steel-reinforced concrete	410-427
Moreno-Navarro, F. / Sol-Sánchez, M. / Rubio-Gámez, M. C. / Segarra-Martínez, M.	The use of additives for the improvement of the mechanical behavior of high modulus asphalt mixes	65-70
Chabannes, Morgan / Bénézet, Jean-Charles / Clerc, Laurent / Garcia-Diaz, Eric	Use of raw rice husk as natural aggregate in a lightweight insulating concrete: An innovative application	428-438
Tsai, Chia-Jung / Huang, Ran / Lin, Wei-Ting / Chiang, Hsiang-Wei	Using GGBOS as the alkali activators in GGBS and GGBOS blended cements	501-507

Informations
sur cette fiche
IssueID
22546
Publié(e) le:
15.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - novembre 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - novembre 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.