Construction and Building Materials - September 2014

Published:	September 2014

Articles in this Issue

Author(s)	Title	Page(s)
Ramesh Kumar, G. B. / Sharma, U. K.	Abrasion resistance of concrete containing marginal aggregates	712-722
Duprat, Frédéric / Vu, Ngoc Tru / Sellier, Alain	Accelerated carbonation tests for the probabilistic prediction of the durability of concrete structures	597-605
Bektas, Fatih / Bektas, Basak Aldemir	Analyzing mix parameters in ASR concrete using response surface methodology	299-305
Sheikhmotevali, Amir Hossein / Ameri, Mahmoud	Application of bitumen rheological parameters to predict thermal cracking behavior of polymer modified asphalt mixture	259-267
Modarres, Amir / Rahmanzadeh, Morteza	Application of coal waste powder as filler in hot mix asphalt	476-483
Emídio, Filipa / de Brito, Jorge / Gaspar, Pedro L. / Silva, Ana	Application of the factor method to the estimation of the service life of natural stone cladding	484-493
Wu, Min / Johannesson, Björn / Geiker, Mette	Application of water vapor sorption measurements for porosity characterization of hardened cement pastes	621-633
Afzal, Salman / Shahzada, Khan / Fahad, Muhammad / Saeed, Salman / Ashraf, Muhammad	Assessment of early-age autogenous shrinkage strains in concrete using bentonite clay as internal curing technique	403-409
Fernández-Carrasco, Lucia / Claramunt, Josep / Ardanuy, Mònica	Autoclaved cellulose fibre reinforced cement: Effects of silica fume	138-145
Baeza, F. / Payá, J. / Galao, Ó. / Saval, J. M. / Garcés, P.	Blending of industrial waste from different sources as partial substitution of Portland cement in pastes and mortars	645-653
Fan, Chen-Shiuan / Huang, Chih-Yang / Li, Kung-Cheh	Bloating mechanism of the mixture of thin-film transistor liquid-crystal display waste glass and basic oxygen furnace slag	664-670
Mahoutian, Mehrdad / Ghouleh, Zaid / Shao, Yixin	Carbon dioxide activated ladle slag binder	214-221
Nagrockienė, Džigita / Girskas, Giedrius / Skripkiūnas, Gintautas	Cement freezing–thawing resistance of hardened cement paste with synthetic zeolite	45-52
Stryszewska, Teresa	The change in selected properties of ceramic materials obtained from ceramic brick treated by the sulphate and chloride ions	268-274
Wu, Tehsien / Chi, Maochieh / Huang, Ran	Characteristics of CFBC fly ash and properties of cement-based composites with CFBC fly ash and coal-fired fly ash	172-180
Derabla, Riad / Benmalek, Mohamed Larbi	Characterization of heat-treated self-compacting concrete containing mineral admixtures at early age and in the long term	787-794
Cao, Mingli / Zhang, Cong / Lv, Haifeng / Xu, Ling	Characterization of mechanical behavior and mechanism of calcium carbonate whisker-reinforced cement mortar	89-97
Chindaprasirt, Prinya / Jenjirapanya, Supichart / Rattanasak, Ubolluk	Characterizations of FBC/PCC fly ash geopolymeric composites	72-78
Padilla, Victor / Alfantazi, Akram	Corrosion film breakdown of galvanized steel in sulphate–chloride solutions	447-457
Gottron, Jennifer / Harries, Kent A. / Xu, Qingfeng	Creep behaviour of bamboo	79-88
Válek, J. / van Halem, E. / Viani, A. / Pérez-Estébanez, M. / Ševčík, R. / Šašek, P.	Determination of optimal burning temperature ranges for production of natural hydraulic limes	771-780
Liu, Zanqun / Deng, Dehua / De Schutter, Geert	Does concrete suffer sulfate salt weathering?	692-701
Borges, C. / Santos Silva, A. / Veiga, R.	Durability of ancient lime mortars in humid environment	606-620
Kim, Jihwan / Moon, Jae-Heum / Shim, Jae Won / Sim, Jongsung / Lee, Hyeon-Gi / Zi, Goangseup	Durability properties of a concrete with waste glass sludge exposed to freeze-and-thaw condition and de-icing salt	398-402
Shi, Linlin / Wang, Licheng / Song, Yupu / Shen, Lu	Dynamic multiaxial strength and failure criterion of dam concrete	181-191
Zou, Dinghua / Weiss, Jason	Early age cracking behavior of internally cured mortar restrained by dual rings with different thickness	146-153
Nath, Pradip / Sarker, Prabir Kumar	Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition	163-171
Tittarelli, F. / Carsana, M. / Ruello, M. L.	Effect of hydrophobic admixture and recycled aggregate on physical–mechanical properties and durability aspects of no-fines concrete	30-37
Horszczaruk, Elzbieta / Mijowska, Ewa / Cendrowski, Krzysztof / Mijowska, Sylwia / Sikora, Pawel	Effect of incorporation route on dispersion of mesoporous silica nanospheres in cement mortar	418-421
Cwirzen, Andrzej / Provis, John L. / Penttala, Vesa / Habermehl-Cwirzen, Karin	The effect of limestone on sodium hydroxide-activated metakaolin-based geopolymers	53-62
Hosseini, Payam / Hosseinpourpia, Reza / Pajum, Arash / Khodavirdi, Mohammad Mahdi / Izadi, Hamed / Vaezi, Ali	Effect of nano-particles and aminosilane interaction on the performances of cement-based composites: An experimental study	113-124
Du, Hongjian / Tan, Kiang Hwee	Effect of particle size on alkali–silica reaction in recycled glass mortars	275-285
Omran, A. F. / Elaguab, Y. M. / Khayat, K. H.	Effect of placement characteristics on SCC lateral pressure variations	507-514
Ipek, Metin / Aksu, Mecbure / Yilmaz, Kemalettin / Uysal, Mucteba	The effect of pre-setting pressure on the flexural strength and fracture toughness of SIFCON during the setting phase	515-521
Belhadj, B. / Bederina, M. / Montrelay, N. / Houessou, J. / Queneudec, M.	Effect of substitution of wood shavings by barley straws on the physico-mechanical properties of lightweight sand concrete	247-258
Choi, Myoung Sung / Kim, Young Jin / Jang, Kyung Pil / Kwon, Seung Hee	Effect of the coarse aggregate size on pipe flow of pumped concrete	723-730
Ramezanianpour, A. A. / Motahari Karein, S. Mahmoud / Vosoughi, Payam / Pilvar, Amirreza / Isapour, Soroush / Moodi, Faramarz	Effects of calcined perlite powder as a SCM on the strength and permeability of concrete	222-228
De Abreu, M. / Iordachescu, M. / Valiente, A.	Effects of hydrogen assisted stress corrosion on damage tolerance of a high-strength duplex stainless steel wire for prestressing concrete	38-44
Dehestani, M. / Nikbin, I. M. / Asadollahi, S.	Effects of specimen shape and size on the compressive strength of self-consolidating concrete (SCC)	685-691
Kuo, Wen-Ten / Hou, Tsung-Chin	Engineering properties of alkali-activated binders by use of desulfurization slag and GGBFS	229-234
Jorne, Fernando / Henriques, Fernando M. A. / Baltazar, Luis G.	Evaluation of consolidation of grout injection with ultrasonic tomography	494-506
Yun, Taeyoung / Kim, Yeonbok	Evaluation of particle simulation methods using aggregate angularity and slump tests	549-566
Ber, Boštjan / Premrov, Miroslav / Štrukelj, Andrej / Kuhta, Milan	Experimental investigations of timber–glass composite wall panels	235-246
Ihara, Takeshi / Gustavsen, Arild / Jelle, Bjørn Petter	Fatigue resistance of double sealant composed of polyisobutylene sealant adjacent to silicone sealant	467-475
Yu, Yujie / Chen, Zhihua / Liu, Hongbo / Wang, Xiaodun	Finite element study of behavior and interface force conditions of seven-wire strand under axial and lateral loading	10-18
Reccia, E. / Milani, G. / Cecchi, A. / Tralli, A.	Full 3D homogenization approach to investigate the behavior of masonry arch bridges: The Venice trans-lagoon railway bridge	567-586
Thongsanitgarn, Pailyn / Wongkeo, Watcharapong / Chaipanich, Arnon / Poon, Chi Sun	Heat of hydration of Portland high-calcium fly ash cement incorporating limestone powder: Effect of limestone particle size	410-417
Latif, Eshrar / Tucker, Simon / Ciupala, Mihaela Anca / Wijeyesekera, Devapriya Chitral / Newport, Darryl	Hygric properties of hemp bio-insulations with differing compositions	702-711
Galbusera, M. M. / de Brito, J. / Silva, A.	The importance of the quality of sampling in service life prediction	19-29
Ul Haq, Ehsan / Padmanabhan, Sanosh Kunjalukkal / Licciulli, Antonio	In-situ carbonation of alkali activated fly ash geopolymer	781-786
Martínez Gabarrón, A. / Flores Yepes, J. A. / Pastor Pérez, J. J. / Berná Serna, J. M. / Arnold, L. C. / Sánchez Medrano, F. J.	Increase of the flexural strength of construction elements made with plaster (calcium sulfate dihydrate) and common reed (Arundo donax L.)	436-441
Mymrin, Vsévolod A. / Alekseev, Kirill P. / Zelinskaya, Elena V. / Tolmacheva, Natalia A. / Catai, Rodrigo E.	Industrial sewage slurry utilization for red ceramics production	368-374
Bu, Y. / Spragg, R. / Villani, C. / Weiss, J.	The influence of accelerated curing on the properties used in the prediction of chloride ingress in concrete using a Nernst–Planck approach	752-759
Yusuf, Moruf Olalekan / Megat Johari, Megat Azmi / Ahmad, Zainal Arifin / Maslehuddin, Mohammed	Influence of curing methods and concentration of NaOH on strength of the synthesized alkaline activated ground slag-ultrafine palm oil fuel ash mortar/concrete	541-548
Kuenzel, C. / Li, L. / Vandeperre, L. / Boccaccini, A. R. / Cheeseman, C. R.	Influence of sand on the mechanical properties of metakaolin geopolymers	442-446
Barbari, Matteo / Cavalli, Alberto / Fiorineschi, Lorenzo / Monti, Massimo / Togni, Marco	Innovative connection in wooden trusses	654-663
Chung, Sang-Yeop / Han, Tong-Seok / Kim, Se-Yun / Lee, Tae-Hyung	Investigation of the permeability of porous concrete reconstructed using probabilistic description methods	760-770
Liu, Yu / Zhu, Xiaodong	Measurement of formaldehyde and VOCs emissions from wood-based panels with nanomaterial-added melamine-impregnated paper	132-137
Montella, G. / Calabrese, A. / Serino, G.	Mechanical characterization of a Tire Derived Material: Experiments, hyperelastic modeling and numerical validation	336-347
Liu, Yunpeng / Wang, Fazhou / Liu, Muyu / Hu, Shuguang	A microstructural approach to adherence mechanism of cement and asphalt mortar (CA mortar) to repair materials	125-131
Zhang, Mingzhong / Jivkov, Andrey P.	Microstructure-informed modelling of damage evolution in cement paste	731-742
Song, Zijian / Jiang, Linhua / Chu, Hongqiang / Xiong, Chuansheng / Liu, Rong / You, Lushen	Modeling of chloride diffusion in concrete immersed in CaCl2 and NaCl solutions with account of multi-phase reactions and ionic interactions	1-9
Brischke, Christian / Thelandersson, Sven	Modelling the outdoor performance of wood products – A review on existing approaches	384-397
Gudmarsson, Anders / Ryden, Nils / Birgisson, Björn	Observed deviations from isotropic linear viscoelastic behavior of asphalt concrete through modal testing	63-71
Kuang, Dongliang / Yu, Jianying / Feng, Zhengang / Li, Rui / Chen, Huaxin / Guan, Yongsheng / Zhang, Zhixiang	Performance evaluation and preventive measures for aging of different bitumens	209-213
Kim, Hyunhwan / Jeong, Kyu-Dong / Lee, Moon Sup / Lee, Soon-Jae	Performance properties of CRM binders with wax warm additives	356-360
Hong, Shuxian / Lai, Wallace Wai-Lok / Wilsch, Gerd / Helmerich, Rosemarie / Helmerich, Robert / Günther, Tobias / Wiggenhauser, Herbert	Periodic mapping of reinforcement corrosion in intrusive chloride contaminated concrete with GPR	671-684
Chen, Meizhu / Leng, Binbin / Wu, Shaopeng / Sang, Yang	Physical, chemical and rheological properties of waste edible vegetable oil rejuvenated asphalt binders	286-298
Escalante-García, J. I. / Castro-Borges, P. / Gorokhovsky, A. / Rodriguez-Varela, F. J.	Portland cement-blast furnace slag mortars activated using waterglass: Effect of temperature and alkali concentration	323-328
Orbe, A. / Losada, R. / Rojí, E. / Cuadrado, J. / Maturana, A.	The prediction of bending strengths in SFRSCC using Computational Fluid Dynamics (CFD)	587-596
Sanchez, M. / Alonso, M. C. / González, R.	Preliminary attempt of hardened mortar sealing by colloidal nanosilica migration	306-312
Hassan, Mohamed / Ahmed, Ehab A. / Benmokrane, Brahim	Punching-shear design equation for two-way concrete slabs reinforced with FRP bars and stirrups	522-532
Gross, Christopher / Walker, Pete	Racking performance of timber studwork and hemp-lime walling	429-435
Yuefei, Liu / Dagang, Lu / Xueping, Fan	Reliability updating and prediction of bridge structures based on proof loads and monitored data	795-804
Tang, Zhenghao / Ali, Majid / Chouw, Nawawi	Residual compressive and shear strengths of novel coconut-fibre-reinforced-concrete interlocking blocks	533-540
Liao, Min-Chih / Chen, Jian-Shiuh / Airey, Gordon D. / Wang, Shi-Jing	Rheological behavior of bitumen mixed with Trinidad lake asphalt	361-367
Ghafari, Ehsan / Costa, Hugo / Júlio, Eduardo	RSM-based model to predict the performance of self-compacting UHPC reinforced with hybrid steel micro-fibers	375-383
Yuan, Xiao-hui / Chen, Wei / Lu, Zhe-an / Chen, Huiguo	Shrinkage compensation of alkali-activated slag concrete and microstructural analysis	422-428
Garcia-Taengua, E. / Martí-Vargas, J. R. / Serna, P.	Splitting of concrete cover in steel fiber reinforced concrete: Semi-empirical modeling and minimum confinement requirements	743-751
Baggio, Daniel / Soudki, Khaled / Noël, Martin	Strengthening of shear critical RC beams with various FRP systems	634-644
Puigvert, F. / Gil, L. / Escrig, C. / Bernat, E.	Stress relaxation analysis of adhesively bonded anchorages for CFRP tendons	313-322
Peng, Jianwei / Deng, Dehua / Yuan, Qiang / Liu, Zanqun / Fang, Lei	Study of the rheological behavior of fresh cement emulsified asphalt paste	348-355
Wei, Jianming / Li, Yanan / Dong, Fuqiang / Feng, Hu / Zhang, Yuzhen	Study on the amorphous poly alpha olefin (APAO) modified asphalt binders	105-112
Dong, Jingliang / Wang, Lijiu / Zhang, Tingting	Study on the strength development, hydration process and carbonation process of NaOH-activated Pisha Sandstone	154-162
Khorsandnia, Nima / Schänzlin, Jörg / Valipour, Hamid / Crews, Keith	Time-dependent behaviour of timber–concrete composite members: Numerical verification, sensitivity and influence of material properties	192-208
Homkhiew, Chatree / Ratanawilai, Thanate / Thongruang, Wiriya	Time–temperature and stress dependent behaviors of composites made from recycled polypropylene and rubberwood flour	98-104
Tiryaki, Sebahattin / Malkoçoğlu, Abdulkadir / Özşahin, Şükrü	Using artificial neural networks for modeling surface roughness of wood in machining process	329-335
Gilbert, Benoit P. / Underhill, Ian D. / Bailleres, Henri / El Hanandeh, Ali / McGavin, Robbie L.	Veneer based composite hollow utility poles manufactured from hardwood plantation thinned trees	458-466

About this
data sheet
IssueID
22542
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - September 2014

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - September 2014

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.