Construction and Building Materials - septembre 2014

Publié:	septembre 2014

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Ramesh Kumar, G. B. / Sharma, U. K.	Abrasion resistance of concrete containing marginal aggregates	712-722
Duprat, Frédéric / Vu, Ngoc Tru / Sellier, Alain	Accelerated carbonation tests for the probabilistic prediction of the durability of concrete structures	597-605
Bektas, Fatih / Bektas, Basak Aldemir	Analyzing mix parameters in ASR concrete using response surface methodology	299-305
Sheikhmotevali, Amir Hossein / Ameri, Mahmoud	Application of bitumen rheological parameters to predict thermal cracking behavior of polymer modified asphalt mixture	259-267
Modarres, Amir / Rahmanzadeh, Morteza	Application of coal waste powder as filler in hot mix asphalt	476-483
Emídio, Filipa / de Brito, Jorge / Gaspar, Pedro L. / Silva, Ana	Application of the factor method to the estimation of the service life of natural stone cladding	484-493
Wu, Min / Johannesson, Björn / Geiker, Mette	Application of water vapor sorption measurements for porosity characterization of hardened cement pastes	621-633
Afzal, Salman / Shahzada, Khan / Fahad, Muhammad / Saeed, Salman / Ashraf, Muhammad	Assessment of early-age autogenous shrinkage strains in concrete using bentonite clay as internal curing technique	403-409
Fernández-Carrasco, Lucia / Claramunt, Josep / Ardanuy, Mònica	Autoclaved cellulose fibre reinforced cement: Effects of silica fume	138-145
Baeza, F. / Payá, J. / Galao, Ó. / Saval, J. M. / Garcés, P.	Blending of industrial waste from different sources as partial substitution of Portland cement in pastes and mortars	645-653
Fan, Chen-Shiuan / Huang, Chih-Yang / Li, Kung-Cheh	Bloating mechanism of the mixture of thin-film transistor liquid-crystal display waste glass and basic oxygen furnace slag	664-670
Mahoutian, Mehrdad / Ghouleh, Zaid / Shao, Yixin	Carbon dioxide activated ladle slag binder	214-221
Nagrockienė, Džigita / Girskas, Giedrius / Skripkiūnas, Gintautas	Cement freezing–thawing resistance of hardened cement paste with synthetic zeolite	45-52
Stryszewska, Teresa	The change in selected properties of ceramic materials obtained from ceramic brick treated by the sulphate and chloride ions	268-274
Wu, Tehsien / Chi, Maochieh / Huang, Ran	Characteristics of CFBC fly ash and properties of cement-based composites with CFBC fly ash and coal-fired fly ash	172-180
Derabla, Riad / Benmalek, Mohamed Larbi	Characterization of heat-treated self-compacting concrete containing mineral admixtures at early age and in the long term	787-794
Cao, Mingli / Zhang, Cong / Lv, Haifeng / Xu, Ling	Characterization of mechanical behavior and mechanism of calcium carbonate whisker-reinforced cement mortar	89-97
Chindaprasirt, Prinya / Jenjirapanya, Supichart / Rattanasak, Ubolluk	Characterizations of FBC/PCC fly ash geopolymeric composites	72-78
Padilla, Victor / Alfantazi, Akram	Corrosion film breakdown of galvanized steel in sulphate–chloride solutions	447-457
Gottron, Jennifer / Harries, Kent A. / Xu, Qingfeng	Creep behaviour of bamboo	79-88
Válek, J. / van Halem, E. / Viani, A. / Pérez-Estébanez, M. / Ševčík, R. / Šašek, P.	Determination of optimal burning temperature ranges for production of natural hydraulic limes	771-780
Liu, Zanqun / Deng, Dehua / De Schutter, Geert	Does concrete suffer sulfate salt weathering?	692-701
Borges, C. / Santos Silva, A. / Veiga, R.	Durability of ancient lime mortars in humid environment	606-620
Kim, Jihwan / Moon, Jae-Heum / Shim, Jae Won / Sim, Jongsung / Lee, Hyeon-Gi / Zi, Goangseup	Durability properties of a concrete with waste glass sludge exposed to freeze-and-thaw condition and de-icing salt	398-402
Shi, Linlin / Wang, Licheng / Song, Yupu / Shen, Lu	Dynamic multiaxial strength and failure criterion of dam concrete	181-191
Zou, Dinghua / Weiss, Jason	Early age cracking behavior of internally cured mortar restrained by dual rings with different thickness	146-153
Nath, Pradip / Sarker, Prabir Kumar	Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition	163-171
Tittarelli, F. / Carsana, M. / Ruello, M. L.	Effect of hydrophobic admixture and recycled aggregate on physical–mechanical properties and durability aspects of no-fines concrete	30-37
Horszczaruk, Elzbieta / Mijowska, Ewa / Cendrowski, Krzysztof / Mijowska, Sylwia / Sikora, Pawel	Effect of incorporation route on dispersion of mesoporous silica nanospheres in cement mortar	418-421
Cwirzen, Andrzej / Provis, John L. / Penttala, Vesa / Habermehl-Cwirzen, Karin	The effect of limestone on sodium hydroxide-activated metakaolin-based geopolymers	53-62
Hosseini, Payam / Hosseinpourpia, Reza / Pajum, Arash / Khodavirdi, Mohammad Mahdi / Izadi, Hamed / Vaezi, Ali	Effect of nano-particles and aminosilane interaction on the performances of cement-based composites: An experimental study	113-124
Du, Hongjian / Tan, Kiang Hwee	Effect of particle size on alkali–silica reaction in recycled glass mortars	275-285
Omran, A. F. / Elaguab, Y. M. / Khayat, K. H.	Effect of placement characteristics on SCC lateral pressure variations	507-514
Ipek, Metin / Aksu, Mecbure / Yilmaz, Kemalettin / Uysal, Mucteba	The effect of pre-setting pressure on the flexural strength and fracture toughness of SIFCON during the setting phase	515-521
Belhadj, B. / Bederina, M. / Montrelay, N. / Houessou, J. / Queneudec, M.	Effect of substitution of wood shavings by barley straws on the physico-mechanical properties of lightweight sand concrete	247-258
Choi, Myoung Sung / Kim, Young Jin / Jang, Kyung Pil / Kwon, Seung Hee	Effect of the coarse aggregate size on pipe flow of pumped concrete	723-730
Ramezanianpour, A. A. / Motahari Karein, S. Mahmoud / Vosoughi, Payam / Pilvar, Amirreza / Isapour, Soroush / Moodi, Faramarz	Effects of calcined perlite powder as a SCM on the strength and permeability of concrete	222-228
De Abreu, M. / Iordachescu, M. / Valiente, A.	Effects of hydrogen assisted stress corrosion on damage tolerance of a high-strength duplex stainless steel wire for prestressing concrete	38-44
Dehestani, M. / Nikbin, I. M. / Asadollahi, S.	Effects of specimen shape and size on the compressive strength of self-consolidating concrete (SCC)	685-691
Kuo, Wen-Ten / Hou, Tsung-Chin	Engineering properties of alkali-activated binders by use of desulfurization slag and GGBFS	229-234
Jorne, Fernando / Henriques, Fernando M. A. / Baltazar, Luis G.	Evaluation of consolidation of grout injection with ultrasonic tomography	494-506
Yun, Taeyoung / Kim, Yeonbok	Evaluation of particle simulation methods using aggregate angularity and slump tests	549-566
Ber, Boštjan / Premrov, Miroslav / Štrukelj, Andrej / Kuhta, Milan	Experimental investigations of timber–glass composite wall panels	235-246
Ihara, Takeshi / Gustavsen, Arild / Jelle, Bjørn Petter	Fatigue resistance of double sealant composed of polyisobutylene sealant adjacent to silicone sealant	467-475
Yu, Yujie / Chen, Zhihua / Liu, Hongbo / Wang, Xiaodun	Finite element study of behavior and interface force conditions of seven-wire strand under axial and lateral loading	10-18
Reccia, E. / Milani, G. / Cecchi, A. / Tralli, A.	Full 3D homogenization approach to investigate the behavior of masonry arch bridges: The Venice trans-lagoon railway bridge	567-586
Thongsanitgarn, Pailyn / Wongkeo, Watcharapong / Chaipanich, Arnon / Poon, Chi Sun	Heat of hydration of Portland high-calcium fly ash cement incorporating limestone powder: Effect of limestone particle size	410-417
Latif, Eshrar / Tucker, Simon / Ciupala, Mihaela Anca / Wijeyesekera, Devapriya Chitral / Newport, Darryl	Hygric properties of hemp bio-insulations with differing compositions	702-711
Galbusera, M. M. / de Brito, J. / Silva, A.	The importance of the quality of sampling in service life prediction	19-29
Ul Haq, Ehsan / Padmanabhan, Sanosh Kunjalukkal / Licciulli, Antonio	In-situ carbonation of alkali activated fly ash geopolymer	781-786
Martínez Gabarrón, A. / Flores Yepes, J. A. / Pastor Pérez, J. J. / Berná Serna, J. M. / Arnold, L. C. / Sánchez Medrano, F. J.	Increase of the flexural strength of construction elements made with plaster (calcium sulfate dihydrate) and common reed (Arundo donax L.)	436-441
Mymrin, Vsévolod A. / Alekseev, Kirill P. / Zelinskaya, Elena V. / Tolmacheva, Natalia A. / Catai, Rodrigo E.	Industrial sewage slurry utilization for red ceramics production	368-374
Bu, Y. / Spragg, R. / Villani, C. / Weiss, J.	The influence of accelerated curing on the properties used in the prediction of chloride ingress in concrete using a Nernst–Planck approach	752-759
Yusuf, Moruf Olalekan / Megat Johari, Megat Azmi / Ahmad, Zainal Arifin / Maslehuddin, Mohammed	Influence of curing methods and concentration of NaOH on strength of the synthesized alkaline activated ground slag-ultrafine palm oil fuel ash mortar/concrete	541-548
Kuenzel, C. / Li, L. / Vandeperre, L. / Boccaccini, A. R. / Cheeseman, C. R.	Influence of sand on the mechanical properties of metakaolin geopolymers	442-446
Barbari, Matteo / Cavalli, Alberto / Fiorineschi, Lorenzo / Monti, Massimo / Togni, Marco	Innovative connection in wooden trusses	654-663
Chung, Sang-Yeop / Han, Tong-Seok / Kim, Se-Yun / Lee, Tae-Hyung	Investigation of the permeability of porous concrete reconstructed using probabilistic description methods	760-770
Liu, Yu / Zhu, Xiaodong	Measurement of formaldehyde and VOCs emissions from wood-based panels with nanomaterial-added melamine-impregnated paper	132-137
Montella, G. / Calabrese, A. / Serino, G.	Mechanical characterization of a Tire Derived Material: Experiments, hyperelastic modeling and numerical validation	336-347
Liu, Yunpeng / Wang, Fazhou / Liu, Muyu / Hu, Shuguang	A microstructural approach to adherence mechanism of cement and asphalt mortar (CA mortar) to repair materials	125-131
Zhang, Mingzhong / Jivkov, Andrey P.	Microstructure-informed modelling of damage evolution in cement paste	731-742
Song, Zijian / Jiang, Linhua / Chu, Hongqiang / Xiong, Chuansheng / Liu, Rong / You, Lushen	Modeling of chloride diffusion in concrete immersed in CaCl2 and NaCl solutions with account of multi-phase reactions and ionic interactions	1-9
Brischke, Christian / Thelandersson, Sven	Modelling the outdoor performance of wood products – A review on existing approaches	384-397
Gudmarsson, Anders / Ryden, Nils / Birgisson, Björn	Observed deviations from isotropic linear viscoelastic behavior of asphalt concrete through modal testing	63-71
Kuang, Dongliang / Yu, Jianying / Feng, Zhengang / Li, Rui / Chen, Huaxin / Guan, Yongsheng / Zhang, Zhixiang	Performance evaluation and preventive measures for aging of different bitumens	209-213
Kim, Hyunhwan / Jeong, Kyu-Dong / Lee, Moon Sup / Lee, Soon-Jae	Performance properties of CRM binders with wax warm additives	356-360
Hong, Shuxian / Lai, Wallace Wai-Lok / Wilsch, Gerd / Helmerich, Rosemarie / Helmerich, Robert / Günther, Tobias / Wiggenhauser, Herbert	Periodic mapping of reinforcement corrosion in intrusive chloride contaminated concrete with GPR	671-684
Chen, Meizhu / Leng, Binbin / Wu, Shaopeng / Sang, Yang	Physical, chemical and rheological properties of waste edible vegetable oil rejuvenated asphalt binders	286-298
Escalante-García, J. I. / Castro-Borges, P. / Gorokhovsky, A. / Rodriguez-Varela, F. J.	Portland cement-blast furnace slag mortars activated using waterglass: Effect of temperature and alkali concentration	323-328
Orbe, A. / Losada, R. / Rojí, E. / Cuadrado, J. / Maturana, A.	The prediction of bending strengths in SFRSCC using Computational Fluid Dynamics (CFD)	587-596
Sanchez, M. / Alonso, M. C. / González, R.	Preliminary attempt of hardened mortar sealing by colloidal nanosilica migration	306-312
Hassan, Mohamed / Ahmed, Ehab A. / Benmokrane, Brahim	Punching-shear design equation for two-way concrete slabs reinforced with FRP bars and stirrups	522-532
Gross, Christopher / Walker, Pete	Racking performance of timber studwork and hemp-lime walling	429-435
Yuefei, Liu / Dagang, Lu / Xueping, Fan	Reliability updating and prediction of bridge structures based on proof loads and monitored data	795-804
Tang, Zhenghao / Ali, Majid / Chouw, Nawawi	Residual compressive and shear strengths of novel coconut-fibre-reinforced-concrete interlocking blocks	533-540
Liao, Min-Chih / Chen, Jian-Shiuh / Airey, Gordon D. / Wang, Shi-Jing	Rheological behavior of bitumen mixed with Trinidad lake asphalt	361-367
Ghafari, Ehsan / Costa, Hugo / Júlio, Eduardo	RSM-based model to predict the performance of self-compacting UHPC reinforced with hybrid steel micro-fibers	375-383
Yuan, Xiao-hui / Chen, Wei / Lu, Zhe-an / Chen, Huiguo	Shrinkage compensation of alkali-activated slag concrete and microstructural analysis	422-428
Garcia-Taengua, E. / Martí-Vargas, J. R. / Serna, P.	Splitting of concrete cover in steel fiber reinforced concrete: Semi-empirical modeling and minimum confinement requirements	743-751
Baggio, Daniel / Soudki, Khaled / Noël, Martin	Strengthening of shear critical RC beams with various FRP systems	634-644
Puigvert, F. / Gil, L. / Escrig, C. / Bernat, E.	Stress relaxation analysis of adhesively bonded anchorages for CFRP tendons	313-322
Peng, Jianwei / Deng, Dehua / Yuan, Qiang / Liu, Zanqun / Fang, Lei	Study of the rheological behavior of fresh cement emulsified asphalt paste	348-355
Wei, Jianming / Li, Yanan / Dong, Fuqiang / Feng, Hu / Zhang, Yuzhen	Study on the amorphous poly alpha olefin (APAO) modified asphalt binders	105-112
Dong, Jingliang / Wang, Lijiu / Zhang, Tingting	Study on the strength development, hydration process and carbonation process of NaOH-activated Pisha Sandstone	154-162
Khorsandnia, Nima / Schänzlin, Jörg / Valipour, Hamid / Crews, Keith	Time-dependent behaviour of timber–concrete composite members: Numerical verification, sensitivity and influence of material properties	192-208
Homkhiew, Chatree / Ratanawilai, Thanate / Thongruang, Wiriya	Time–temperature and stress dependent behaviors of composites made from recycled polypropylene and rubberwood flour	98-104
Tiryaki, Sebahattin / Malkoçoğlu, Abdulkadir / Özşahin, Şükrü	Using artificial neural networks for modeling surface roughness of wood in machining process	329-335
Gilbert, Benoit P. / Underhill, Ian D. / Bailleres, Henri / El Hanandeh, Ali / McGavin, Robbie L.	Veneer based composite hollow utility poles manufactured from hardwood plantation thinned trees	458-466

Informations
sur cette fiche
IssueID
22542
Publié(e) le:
15.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - septembre 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - septembre 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.