Construction and Building Materials - August 2014

Published:	August 2014

Articles in this Issue

Author(s)	Title	Page(s)
Zhang, Qian / Li, Victor C.	Adhesive bonding of fire-resistive engineered cementitious composites (ECC) to steel	431-439
Shams, Ali / Hegger, Josef / Horstmann, Michael	An analytical model for sandwich panels made of textile-reinforced concrete	451-459
Shen, Shui-Long / Hou, Dong-Wei / Zhao, Jian-Li / Horpibulsuk, Suksun / Yin, Zhen-Yu	Assessment of internal forces for intermediate anchorage zone of post-tensioned concrete structure	370-378
Razavizadeh, Arezoo / Ghiassi, Bahman / Oliveira, Daniel V.	Bond behavior of SRG-strengthened masonry units: Testing and numerical modeling	387-397
Silva, Bruno / Pigouni, Aikaterina Evina / Valluzzi, Maria Rosa / Modena, Claudio	Calibration of analytical formulations predicting compressive strength in consolidated three-leaf masonry walls	28-38
Chen, Zongwu / Xie, Jun / Xiao, Yue / Chen, Juyong / Wu, Shaopeng	Characteristics of bonding behavior between basic oxygen furnace slag and asphalt binder	60-66
Demir, Cem / Ilki, Alper	Characterization of the materials used in the multi-leaf masonry walls of monumental structures in Istanbul, Turkey	398-413
Kong, Lijuan / Hou, Lirong / Du, Yuanbo	Chemical reactivity of lightweight aggregate in cement paste	22-27
Yamada, Kazuo / Karasuda, Shinya / Ogawa, Shoichi / Sagawa, Yasutaka / Osako, Masahiro / Hamada, Hidenori / Isneini, Mohd	CPT as an evaluation method of concrete mixture for ASR expansion	184-191
Ryl, J. / Wysocka, J. / Darowicki, K.	Determination of causes of accelerated local corrosion of austenitic steels in water supply systems	246-252
Yan, Dickson Y. S. / Tang, Ivan Y. / Lo, Irene M. C.	Development of controlled low-strength material derived from beneficial reuse of bottom ash and sediment for green construction	201-207
Sirisawat, Ittiporn / Saengsoy, Warangkana / Baingam, Lalita / Krammart, Pitisan / Tangtermsirikul, Somnuk	Durability and testing of mortar with interground fly ash and limestone cements in sulfate solutions	39-46
Xu, Tao / Shi, Huaquan / Wang, Hao / Huang, Xiaoming	Dynamic evolution of emitted volatiles from thermal decomposed bituminous materials	47-53
Yoo, Doo-Yeol / Kang, Su-Tea / Yoon, Young-Soo	Effect of fiber length and placement method on flexural behavior, tension-softening curve, and fiber distribution characteristics of UHPFRC	67-81
Lv, Shenghua / Liu, Jingjing / Sun, Ting / Ma, Yujuan / Zhou, Qingfang	Effect of GO nanosheets on shapes of cement hydration crystals and their formation process	231-239
Criado, M. / García-Díaz, I. / Bastidas, J. M. / Alguacil, F. J. / López, F. A. / Monticelli, C.	Effect of recycled glass fiber on the corrosion behavior of reinforced mortar	261-269
Güneyisi, Erhan / Gesoǧlu, Mehmet / Algin, Zeynep / Yazıcı, Halit	Effect of surface treatment methods on the properties of self-compacting concrete with recycled aggregates	172-183
Demirboğa, Ramazan / Karagöl, Fatma / Polat, Rıza / Kaygusuz, Mehmet Akif	The effects of urea on strength gaining of fresh concrete under the cold weather conditions	114-120
Luo, Zhe / Xiao, Feipeng / Sharma, Radhey	Efficient reliability-based approach for mechanistic-empirical asphalt pavement design	157-165
Khattab, Ahmed M. / El-Badawy, Sherif M. / Al Hazmi, Al Abbas / Elmwafi, Mahmoud	Evaluation of Witczak E* predictive models for the implementation of AASHTOWare-Pavement ME Design in the Kingdom of Saudi Arabia	360-369
Çetin, Sedat	Evaluation on the usability of structure steel fiber-reinforced bituminous hot mixtures	414-420
Min, Tae-Beom / Cho, In-Sung / Park, Won-Jun / Choi, Hyun-Kuk / Lee, Han-Seung	Experimental study on the development of compressive strength of early concrete age using calcium-based hardening accelerator and high early strength cement	208-214
Pujadas, Pablo / Blanco, Ana / Cavalaro, Sergio / de la Fuente, Albert / Aguado, Antonio	Fibre distribution in macro-plastic fibre reinforced concrete slab-panels	496-503
Hassan, Ibrahim Ogiri / Ismail, Mohammad / Forouzani, Parham / Majid, Zaiton Abdul / Mirza, Jahangir	Flow characteristics of ternary blended self-consolidating cement mortars incorporating palm oil fuel ash and pulverised burnt clay	253-260
Apeagyei, Alex K.	Flow number predictive models from volumetric and binder properties	240-245
Wang, Zhen-jun / Li, Ke-zhi / Wang, Chuang	Freezing–thawing effects on electromagnetic wave reflectivity of carbon fiber cement based composites	288-292
Wang, Fazhou / Yang, Lu / Sun, Guoxin / Guan, Lingyue / Hu, Shuguang	The hierarchical porous structure of substrate enhanced photocatalytic activity of TiO2/cementitious materials	488-495
Pires, Vera / Rosa, L. G. / Dionísio, A.	Implications of exposure to high temperatures for stone cladding requirements of three Portuguese granites regarding the use of dowel–hole anchoring systems	440-450
Wang, D. / Chen, X. / Stanjek, H. / Oeser, M. / Steinauer, B.	Influence of freeze–thaw on the polishing resistance of coarse aggregates on road surface	192-200
Han, Jianguo / Wang, Kejin / Shi, Jiyao / Wang, Yue	Influence of sodium aluminate on cement hydration and concrete properties	342-349
Boháč, Martin / Palou, Martin / Novotný, Radoslav / Másilko, Jiří / Všianský, Dalibor / Staněk, Theodor	Investigation on early hydration of ternary Portland cement-blast-furnace slag–metakaolin blends	333-341
Tironi, Alejandra / Castellano, Claudia C. / Bonavetti, Viviana L. / Trezza, Mónica A. / Scian, Alberto N. / Irassar, Edgardo F.	Kaolinitic calcined clays – Portland cement system: Hydration and properties	215-221
Guo, Naisheng / You, Zhanping / Zhao, Yinghua / Tan, Yiqiu / Diab, Aboelkasim	Laboratory performance of warm mix asphalt containing recycled asphalt mixtures	141-149
Abubaker, Farhat / Lynsdale, Cyril / Cripps, John	Laboratory study of the long-term durability of buried concrete exposed to Lower Lias Clay	130-140
Heaton, T. / Sammon, C. / Ault, J. / Black, L. / Forth, J. P.	Masonry units bound with waste vegetable oil – Chemical analysis and evaluation of engineering properties	460-472
Zhou, Qinyi / Gong, Meng / Chui, Ying Hei / Mohammad, Mohammad	Measurement of rolling shear modulus and strength of cross laminated timber fabricated with black spruce	379-386
Lanssens, Tine / Tanghe, Charlot / Rahbar, Nima / Okumus, Pinar / Van Dessel, Steven / El-Korchi, Tahar	Mechanical behavior of a glass fiber-reinforced polymer sandwich panel with through-thickness fiber insertions	473-479
Heidari-Rarani, M. / Aliha, M. R. M. / Shokrieh, M. M. / Ayatollahi, M. R.	Mechanical durability of an optimized polymer concrete under various thermal cyclic loadings – An experimental study	308-315
Alves, A. V. / Vieira, T. F. / de Brito, J. / Correia, J. R.	Mechanical properties of structural concrete with fine recycled ceramic aggregates	103-113
García, D. / Vegas, I. / Cacho, I.	Mechanical recycling of GFRP waste as short-fiber reinforcements in microconcrete	293-300
Nepomuceno, Miguel C. S. / Pereira-de-Oliveira, L. A. / Lopes, S. M. R.	Methodology for the mix design of self-compacting concrete using different mineral additions in binary blends of powders	82-94
Florea, M. V. A. / Brouwers, H. J. H.	Modelling of chloride binding related to hydration products in slag-blended cements	421-430
Walker, R. / Pavía, S.	Moisture transfer and thermal properties of hemp–lime concretes	270-276
Zhang, Mingzhong / Xu, Kaiming / He, Yongjia / Jivkov, Andrey P.	Pore-scale modelling of 3D moisture distribution and critical saturation in cementitious materials	222-230
Lin, Kae-Long / Lin, Deng-Fong / Wang, Wei-Jer / Chang, Cheng-Cheng / Lee, Tzen-Chin	Pozzolanic reaction of a mortar made with cement and slag vitrified from a MSWI ash-mix and LED sludge	277-287
Gopinath, Smitha / Kumar, V. Ramesh / Sheth, Harishkumar / Murthy, A. Ramachandra / Iyer, Nagesh R.	Pre-fabricated sandwich panels using cold-formed steel and textile reinforced concrete	54-59
Wang, Xiao-Yong	Properties prediction of ultra high performance concrete using blended cement hydration model	1-10
Wright, Jared Robert / Shafaatian, Seyed / Rajabipour, Farshad	Reliability of chemical index model in determining fly ash effectiveness against alkali-silica reaction induced by highly reactive glass aggregates	166-171
Xiao, Feipeng / Amirkhanian, Serji / Wang, Hainian / Hao, Peiwen	Rheological property investigations for polymer and polyphosphoric acid modified asphalt binders at high temperatures	316-323
Sfikas, Ioannis P. / Badogiannis, Efstratios G. / Trezos, Konstantinos G.	Rheology and mechanical characteristics of self-compacting concrete mixtures containing metakaolin	121-129
Shao, Wei / Li, Jingpei	Service life prediction of cracked RC pipe piles exposed to marine environments	301-307
Bahmani, Sayed Hessam / Huat, Bujang B. K. / Asadi, Afshin / Farzadnia, Nima	Stabilization of residual soil using SiO2 nanoparticles and cement	350-359
Li, Yinwen / Yang, Chaolong / Zhang, Yunfei / Zheng, Jian / Guo, Huilong / Lu, Mangeng	Study on dispersion, adsorption and flow retaining behaviors of cement mortars with TPEG-type polyether kind polycarboxylate superplasticizers	324-332
Al-Hdabi, Abbas / Nageim, Hassan Al / Seton, Linda	Superior cold rolled asphalt mixtures using supplementary cementations materials	95-102
Ma, Hongyan / Hou, Dongshuai / Lu, Youyuan / Li, Zongjin	Two-scale modeling of the capillary network in hydrated cement paste	11-21
Chiou, I. J. / Chen, C. H. / Li, Y. H.	Using oyster-shell foamed bricks to neutralize the acidity of recycled rainwater	480-487
Sol-Sánchez, Miguel / Moreno-Navarro, Fernando / Rubio-Gámez, Mª Carmen	Viability of using end-of-life tire pads as under sleeper pads in railway	150-156

About this
data sheet
IssueID
22541
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - August 2014

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - August 2014

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.