Construction and Building Materials - août 2014

Publié:	août 2014

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Zhang, Qian / Li, Victor C.	Adhesive bonding of fire-resistive engineered cementitious composites (ECC) to steel	431-439
Shams, Ali / Hegger, Josef / Horstmann, Michael	An analytical model for sandwich panels made of textile-reinforced concrete	451-459
Shen, Shui-Long / Hou, Dong-Wei / Zhao, Jian-Li / Horpibulsuk, Suksun / Yin, Zhen-Yu	Assessment of internal forces for intermediate anchorage zone of post-tensioned concrete structure	370-378
Razavizadeh, Arezoo / Ghiassi, Bahman / Oliveira, Daniel V.	Bond behavior of SRG-strengthened masonry units: Testing and numerical modeling	387-397
Silva, Bruno / Pigouni, Aikaterina Evina / Valluzzi, Maria Rosa / Modena, Claudio	Calibration of analytical formulations predicting compressive strength in consolidated three-leaf masonry walls	28-38
Chen, Zongwu / Xie, Jun / Xiao, Yue / Chen, Juyong / Wu, Shaopeng	Characteristics of bonding behavior between basic oxygen furnace slag and asphalt binder	60-66
Demir, Cem / Ilki, Alper	Characterization of the materials used in the multi-leaf masonry walls of monumental structures in Istanbul, Turkey	398-413
Kong, Lijuan / Hou, Lirong / Du, Yuanbo	Chemical reactivity of lightweight aggregate in cement paste	22-27
Yamada, Kazuo / Karasuda, Shinya / Ogawa, Shoichi / Sagawa, Yasutaka / Osako, Masahiro / Hamada, Hidenori / Isneini, Mohd	CPT as an evaluation method of concrete mixture for ASR expansion	184-191
Ryl, J. / Wysocka, J. / Darowicki, K.	Determination of causes of accelerated local corrosion of austenitic steels in water supply systems	246-252
Yan, Dickson Y. S. / Tang, Ivan Y. / Lo, Irene M. C.	Development of controlled low-strength material derived from beneficial reuse of bottom ash and sediment for green construction	201-207
Sirisawat, Ittiporn / Saengsoy, Warangkana / Baingam, Lalita / Krammart, Pitisan / Tangtermsirikul, Somnuk	Durability and testing of mortar with interground fly ash and limestone cements in sulfate solutions	39-46
Xu, Tao / Shi, Huaquan / Wang, Hao / Huang, Xiaoming	Dynamic evolution of emitted volatiles from thermal decomposed bituminous materials	47-53
Yoo, Doo-Yeol / Kang, Su-Tea / Yoon, Young-Soo	Effect of fiber length and placement method on flexural behavior, tension-softening curve, and fiber distribution characteristics of UHPFRC	67-81
Lv, Shenghua / Liu, Jingjing / Sun, Ting / Ma, Yujuan / Zhou, Qingfang	Effect of GO nanosheets on shapes of cement hydration crystals and their formation process	231-239
Criado, M. / García-Díaz, I. / Bastidas, J. M. / Alguacil, F. J. / López, F. A. / Monticelli, C.	Effect of recycled glass fiber on the corrosion behavior of reinforced mortar	261-269
Güneyisi, Erhan / Gesoǧlu, Mehmet / Algin, Zeynep / Yazıcı, Halit	Effect of surface treatment methods on the properties of self-compacting concrete with recycled aggregates	172-183
Demirboğa, Ramazan / Karagöl, Fatma / Polat, Rıza / Kaygusuz, Mehmet Akif	The effects of urea on strength gaining of fresh concrete under the cold weather conditions	114-120
Luo, Zhe / Xiao, Feipeng / Sharma, Radhey	Efficient reliability-based approach for mechanistic-empirical asphalt pavement design	157-165
Khattab, Ahmed M. / El-Badawy, Sherif M. / Al Hazmi, Al Abbas / Elmwafi, Mahmoud	Evaluation of Witczak E* predictive models for the implementation of AASHTOWare-Pavement ME Design in the Kingdom of Saudi Arabia	360-369
Çetin, Sedat	Evaluation on the usability of structure steel fiber-reinforced bituminous hot mixtures	414-420
Min, Tae-Beom / Cho, In-Sung / Park, Won-Jun / Choi, Hyun-Kuk / Lee, Han-Seung	Experimental study on the development of compressive strength of early concrete age using calcium-based hardening accelerator and high early strength cement	208-214
Pujadas, Pablo / Blanco, Ana / Cavalaro, Sergio / de la Fuente, Albert / Aguado, Antonio	Fibre distribution in macro-plastic fibre reinforced concrete slab-panels	496-503
Hassan, Ibrahim Ogiri / Ismail, Mohammad / Forouzani, Parham / Majid, Zaiton Abdul / Mirza, Jahangir	Flow characteristics of ternary blended self-consolidating cement mortars incorporating palm oil fuel ash and pulverised burnt clay	253-260
Apeagyei, Alex K.	Flow number predictive models from volumetric and binder properties	240-245
Wang, Zhen-jun / Li, Ke-zhi / Wang, Chuang	Freezing–thawing effects on electromagnetic wave reflectivity of carbon fiber cement based composites	288-292
Wang, Fazhou / Yang, Lu / Sun, Guoxin / Guan, Lingyue / Hu, Shuguang	The hierarchical porous structure of substrate enhanced photocatalytic activity of TiO2/cementitious materials	488-495
Pires, Vera / Rosa, L. G. / Dionísio, A.	Implications of exposure to high temperatures for stone cladding requirements of three Portuguese granites regarding the use of dowel–hole anchoring systems	440-450
Wang, D. / Chen, X. / Stanjek, H. / Oeser, M. / Steinauer, B.	Influence of freeze–thaw on the polishing resistance of coarse aggregates on road surface	192-200
Han, Jianguo / Wang, Kejin / Shi, Jiyao / Wang, Yue	Influence of sodium aluminate on cement hydration and concrete properties	342-349
Boháč, Martin / Palou, Martin / Novotný, Radoslav / Másilko, Jiří / Všianský, Dalibor / Staněk, Theodor	Investigation on early hydration of ternary Portland cement-blast-furnace slag–metakaolin blends	333-341
Tironi, Alejandra / Castellano, Claudia C. / Bonavetti, Viviana L. / Trezza, Mónica A. / Scian, Alberto N. / Irassar, Edgardo F.	Kaolinitic calcined clays – Portland cement system: Hydration and properties	215-221
Guo, Naisheng / You, Zhanping / Zhao, Yinghua / Tan, Yiqiu / Diab, Aboelkasim	Laboratory performance of warm mix asphalt containing recycled asphalt mixtures	141-149
Abubaker, Farhat / Lynsdale, Cyril / Cripps, John	Laboratory study of the long-term durability of buried concrete exposed to Lower Lias Clay	130-140
Heaton, T. / Sammon, C. / Ault, J. / Black, L. / Forth, J. P.	Masonry units bound with waste vegetable oil – Chemical analysis and evaluation of engineering properties	460-472
Zhou, Qinyi / Gong, Meng / Chui, Ying Hei / Mohammad, Mohammad	Measurement of rolling shear modulus and strength of cross laminated timber fabricated with black spruce	379-386
Lanssens, Tine / Tanghe, Charlot / Rahbar, Nima / Okumus, Pinar / Van Dessel, Steven / El-Korchi, Tahar	Mechanical behavior of a glass fiber-reinforced polymer sandwich panel with through-thickness fiber insertions	473-479
Heidari-Rarani, M. / Aliha, M. R. M. / Shokrieh, M. M. / Ayatollahi, M. R.	Mechanical durability of an optimized polymer concrete under various thermal cyclic loadings – An experimental study	308-315
Alves, A. V. / Vieira, T. F. / de Brito, J. / Correia, J. R.	Mechanical properties of structural concrete with fine recycled ceramic aggregates	103-113
García, D. / Vegas, I. / Cacho, I.	Mechanical recycling of GFRP waste as short-fiber reinforcements in microconcrete	293-300
Nepomuceno, Miguel C. S. / Pereira-de-Oliveira, L. A. / Lopes, S. M. R.	Methodology for the mix design of self-compacting concrete using different mineral additions in binary blends of powders	82-94
Florea, M. V. A. / Brouwers, H. J. H.	Modelling of chloride binding related to hydration products in slag-blended cements	421-430
Walker, R. / Pavía, S.	Moisture transfer and thermal properties of hemp–lime concretes	270-276
Zhang, Mingzhong / Xu, Kaiming / He, Yongjia / Jivkov, Andrey P.	Pore-scale modelling of 3D moisture distribution and critical saturation in cementitious materials	222-230
Lin, Kae-Long / Lin, Deng-Fong / Wang, Wei-Jer / Chang, Cheng-Cheng / Lee, Tzen-Chin	Pozzolanic reaction of a mortar made with cement and slag vitrified from a MSWI ash-mix and LED sludge	277-287
Gopinath, Smitha / Kumar, V. Ramesh / Sheth, Harishkumar / Murthy, A. Ramachandra / Iyer, Nagesh R.	Pre-fabricated sandwich panels using cold-formed steel and textile reinforced concrete	54-59
Wang, Xiao-Yong	Properties prediction of ultra high performance concrete using blended cement hydration model	1-10
Wright, Jared Robert / Shafaatian, Seyed / Rajabipour, Farshad	Reliability of chemical index model in determining fly ash effectiveness against alkali-silica reaction induced by highly reactive glass aggregates	166-171
Xiao, Feipeng / Amirkhanian, Serji / Wang, Hainian / Hao, Peiwen	Rheological property investigations for polymer and polyphosphoric acid modified asphalt binders at high temperatures	316-323
Sfikas, Ioannis P. / Badogiannis, Efstratios G. / Trezos, Konstantinos G.	Rheology and mechanical characteristics of self-compacting concrete mixtures containing metakaolin	121-129
Shao, Wei / Li, Jingpei	Service life prediction of cracked RC pipe piles exposed to marine environments	301-307
Bahmani, Sayed Hessam / Huat, Bujang B. K. / Asadi, Afshin / Farzadnia, Nima	Stabilization of residual soil using SiO2 nanoparticles and cement	350-359
Li, Yinwen / Yang, Chaolong / Zhang, Yunfei / Zheng, Jian / Guo, Huilong / Lu, Mangeng	Study on dispersion, adsorption and flow retaining behaviors of cement mortars with TPEG-type polyether kind polycarboxylate superplasticizers	324-332
Al-Hdabi, Abbas / Nageim, Hassan Al / Seton, Linda	Superior cold rolled asphalt mixtures using supplementary cementations materials	95-102
Ma, Hongyan / Hou, Dongshuai / Lu, Youyuan / Li, Zongjin	Two-scale modeling of the capillary network in hydrated cement paste	11-21
Chiou, I. J. / Chen, C. H. / Li, Y. H.	Using oyster-shell foamed bricks to neutralize the acidity of recycled rainwater	480-487
Sol-Sánchez, Miguel / Moreno-Navarro, Fernando / Rubio-Gámez, Mª Carmen	Viability of using end-of-life tire pads as under sleeper pads in railway	150-156

Informations
sur cette fiche
IssueID
22541
Publié(e) le:
15.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - août 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - août 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.