Construction and Building Materials - March 2014

Published:	March 2014

Articles in this Issue

Author(s)	Title	Page(s)
Dang, Yudong / Xie, Ning / Kessel, Amanda / McVey, Eli / Pace, Alexandra / Shi, Xianming	Accelerated laboratory evaluation of surface treatments for protecting concrete bridge decks from salt scaling	128-135
Meira, G. R. / Andrade, C. / Vilar, E. O. / Nery, K. D.	Analysis of chloride threshold from laboratory and field experiments in marine atmosphere zone	289-298
Nadir, Yashida / Nagarajan, Praveen	The behavior of horizontally glued laminated beams using rubber wood	398-405
Chalioris, Constantin E. / Thermou, Georgia E. / Pantazopoulou, Stavroula J.	Behaviour of rehabilitated RC beams with self-compacting concrete jacketing – Analytical model and test results	257-273
Bernardi, D. / DeJong, J. T. / Montoya, B. M. / Martinez, B. C.	Bio-bricks: Biologically cemented sandstone bricks	462-469
Najafgholipour, M. A. / Maheri, Mahmoud R. / Lourenço, P. B.	Definition of interaction curves for the in-plane and out-of-plane capacity in brick masonry walls	168-182
Zhang, Hai Yan / Kodur, Venkatesh / Qi, Shu Liang / Cao, Liang / Wu, Bo	Development of metakaolin–fly ash based geopolymers for fire resistance applications	38-45
Consoli, Nilo Cesar / Rocha, Cecilia Gravina da / Silvani, Carina	Devising dosages for soil–fly ash–lime blends based on tensile strength controlling equations	238-245
Bouasker, Marwen / Houda Khalifa, Nour El / Mounanga, Pierre / Kahla, Nabil Ben	Early-age deformation and autogenous cracking risk of slag–limestone filler-cement blended binders	158-167
Yan, Libo / Chouw, Nawawi / Jayaraman, Krishnan	Effect of column parameters on flax FRP confined coir fibre reinforced concrete	299-312
Mo, Kim Hung / Yap, Kathy Khai Qian / Alengaram, U. Johnson / Jumaat, Mohd Zamin	The effect of steel fibres on the enhancement of flexural and compressive toughness and fracture characteristics of oil palm shell concrete	20-28
Lin, Juntao / Hong, Jinxiang / Huang, Chong / Liu, Jiaping / Wu, Shaopeng	Effectiveness of rejuvenator seal materials on performance of asphalt pavement	63-68
Colajanni, Piero / Fossetti, Marinella / Macaluso, Giuseppe	Effects of confinement level, cross-section shape and corner radius on the cyclic behavior of CFRCM confined concrete columns	379-389
Reis, J. M. L. / Carvalho, A. R. / da Costa Mattos, H. S.	Effects of displacement rate and temperature on the fracture properties of polymer mortars	1-4
La Rosa, A. D. / Recca, A. / Gagliano, A. / Summerscales, J. / Latteri, A. / Cozzo, G. / Cicala, G.	Environmental impacts and thermal insulation performance of innovative composite solutions for building applications	406-414
Alejandre, F. J. / Flores-Alés, V. / Villegas, R. / García-Heras, J. / Morón, E.	Estimation of Portland cement mortar compressive strength using microcores. Influence of shape and size	359-364
Beygi, Morteza H. A. / Kazemi, Mohammad Taghi / Vaseghi Amiri, Javad / Nikbin, Iman M. / Rabbanifar, Saeed / Rahmani, Ebrahim	Evaluation of the effect of maximum aggregate size on fracture behavior of self compacting concrete	202-211
Najim, Khalid B. / Mahmod, Zaher S. / Atea, Abdul-Khaliq M.	Experimental investigation on using Cement Kiln Dust (CKD) as a cement replacement material in producing modified cement mortar	5-12
Singh, Varinder / Bansal, Prem Pal / Kumar, Maneek / Kaushik, S. K.	Experimental studies on strength and ductility of CFRP jacketed reinforced concrete beam-column joints	194-201
Maraveas, C. / Wang, Y. C. / Swailes, T.	Fire resistance of 19th century fireproof flooring systems: A sensitivity analysis	69-81
Borinaga-Treviño, Roque / Pascual-Muñoz, Pablo / Calzada-Perez, Miguel Angel / Castro-Fresno, Daniel	Freeze–thaw durability of cement-based geothermal grouting materials	390-397
Blyberg, Louise / Lang, Maria / Lundstedt, Karin / Schander, Matilda / Serrano, Erik / Silfverhielm, Magnus / Stålhandske, Christina	Glass, timber and adhesive joints – Innovative load bearing building components	470-478
Gao, Peng / Zhang, Tongsheng / Luo, Ruifeng / Wei, Jiangxiong / Yu, Qijun	Improvement of autogenous shrinkage measurement for cement paste at very early age: Corrugated tube method using non-contact sensors	57-62
Zou, Dujian / Liu, Tiejun / Teng, Jun / Du, Chengcheng / Li, Bo	Influence of creep and drying shrinkage of reinforced concrete shear walls on the axial shortening of high-rise buildings	46-56
Chang, Jun / Li, Yong / Cao, Mingli / Fang, Yanfeng	Influence of magnesium hydroxide content and fineness on the carbonation of calcium hydroxide	82-88
Mukharjee, Bibhuti Bhusan / Barai, Sudhirkumar V.	Influence of Nano-Silica on the properties of recycled aggregate concrete	29-37
Rosell, Joan Ramón / Haurie, Laia / Navarro, Antonia / Cantalapiedra, Inma R.	Influence of the traditional slaking process on the lime putty characteristics	423-430
Yang, Keun-Hyeok / Kim, Gwang-Hee / Choi, Yong-Hwa	An initial trial mixture proportioning procedure for structural lightweight aggregate concrete	431-439
Khiavi, Alireza Khavandi / Ameri, Mahmoud	Investigating the fatigue endurance limit of HMA mixture using RDEC approach	97-102
Holmes, Niall / Dunne, Kevin / O'Donnell, John	Longitudinal shear resistance of composite slabs containing crumb rubber in concrete toppings	365-378
Pasandín, A. R. / Pérez, I.	Mechanical properties of hot-mix asphalt made with recycled concrete aggregates coated with bitumen emulsion	350-358
Gao, Lei / Ni, Fujian / Braham, Andrew / Luo, Hailong	Mixed-Mode cracking behavior of cold recycled mixes with emulsion using Arcan configuration	415-422
Plevris, Vagelis / Asteris, Panagiotis G.	Modeling of masonry failure surface under biaxial compressive stress using Neural Networks	447-461
Jiménez Rivero, Ana / de Guzmán Báez, Ana / Navarro, Justo García	New composite gypsum plaster – ground waste rubber coming from pipe foam insulation	146-152
Alberti, M. G. / Enfedaque, A. / Gálvez, J. C.	On the mechanical properties and fracture behavior of polyolefin fiber-reinforced self-compacting concrete	274-288
San Nicolas, R. / Cyr, M. / Escadeillas, G.	Performance-based approach to durability of concrete containing flash-calcined metakaolin as cement replacement	313-322
Zhou, Wujun / Choi, Pangil / Saraf, Sureel / Ryu, Sung Woo / Won, Moon C.	Premature distresses at transverse construction joints (TCJs) in continuously reinforced concrete pavements	212-219
Sayadi, Ali A. / Rahman, Ahmad Baharuddin Abd. / Jumaat, Mohd Zamin Bin / Alengaram, U. Johnson / Ahmad, Sayadi	The relationship between interlocking mechanism and bond strength in elastic and inelastic segment of splice sleeve	227-237
Gul, Waqar Ahmed / Guler, Murat	Rutting susceptibility of asphalt concrete with recycled concrete aggregate using revised Marshall procedure	341-349
Badalassi, Massimo / Biolzi, Luigi / Royer-Carfagni, Gianni / Salvatore, Walter	Safety factors for the structural design of glass	114-127
van den Heede, Philip / De Belie, Nele	A service life based global warming potential for high-volume fly ash concrete exposed to carbonation	183-193
Zeng, Guowei / Yang, Xinhua / Yin, Anyi / Bai, Fan	Simulation of damage evolution and crack propagation in three-point bending pre-cracked asphalt mixture beam	323-332
Mohammed, Bashar S. / Abdullahi, M. / Hoong, C. K.	Statistical models for concrete containing wood chipping as partial replacement to fine aggregate	13-19
Mahjoub, Reza / Yatim, Jamaludin Mohamad / Sam, Abdul Rahman Mohd / Hashemi, Sayed Hamid	Tensile properties of kenaf fiber due to various conditions of chemical fiber surface modifications	103-113
Druta, Cristian / Wang, Linbing / Stephen Lane, D.	Tensile strength and paste–aggregate bonding characteristics of self-consolidating concrete	89-96
Cheng, Yunhong / Huang, Fei / Li, Guang-lu / Xu, Longshuo / Hou, Jianlong	Test research on effects of ceramic polishing powder on carbonation and sulphate-corrosion resistance of concrete	440-446
Alavez-Ramirez, R. / Chiñas-Castillo, F. / Morales-Dominguez, V. / Ortiz-Guzman, M. / Lara-Romero, J.	Thermal lag and decrement factor of a coconut-ferrocement roofing system	246-256
Teomete, Egemen	Transverse strain sensitivity of steel fiber reinforced cement composites tested by compression and split tensile tests	136-145
Goure-Doubi, H. / Lecomte-Nana, G. / Nait-Abbou, F. / Nait-Ali, B. / Smith, A. / Coudert, V. / Konan, L.	Understanding the strengthening of a lateritic "geomimetic" material	333-340
Väntsi, Olli / Kärki, Timo	Utilization of recycled mineral wool as filler in wood–polypropylene composites	220-226
Nuruddin, Muhd Fadhil / Chang, Kok Yung / Azmee, Norzaireen Mohd	Workability and compressive strength of ductile self compacting concrete (DSCC) with various cement replacement materials	153-157

About this
data sheet
IssueID
22526
Published on:
15/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - March 2014

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - March 2014

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.