Construction and Building Materials - mars 2014

Publié:	mars 2014

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Dang, Yudong / Xie, Ning / Kessel, Amanda / McVey, Eli / Pace, Alexandra / Shi, Xianming	Accelerated laboratory evaluation of surface treatments for protecting concrete bridge decks from salt scaling	128-135
Meira, G. R. / Andrade, C. / Vilar, E. O. / Nery, K. D.	Analysis of chloride threshold from laboratory and field experiments in marine atmosphere zone	289-298
Nadir, Yashida / Nagarajan, Praveen	The behavior of horizontally glued laminated beams using rubber wood	398-405
Chalioris, Constantin E. / Thermou, Georgia E. / Pantazopoulou, Stavroula J.	Behaviour of rehabilitated RC beams with self-compacting concrete jacketing – Analytical model and test results	257-273
Bernardi, D. / DeJong, J. T. / Montoya, B. M. / Martinez, B. C.	Bio-bricks: Biologically cemented sandstone bricks	462-469
Najafgholipour, M. A. / Maheri, Mahmoud R. / Lourenço, P. B.	Definition of interaction curves for the in-plane and out-of-plane capacity in brick masonry walls	168-182
Zhang, Hai Yan / Kodur, Venkatesh / Qi, Shu Liang / Cao, Liang / Wu, Bo	Development of metakaolin–fly ash based geopolymers for fire resistance applications	38-45
Consoli, Nilo Cesar / Rocha, Cecilia Gravina da / Silvani, Carina	Devising dosages for soil–fly ash–lime blends based on tensile strength controlling equations	238-245
Bouasker, Marwen / Houda Khalifa, Nour El / Mounanga, Pierre / Kahla, Nabil Ben	Early-age deformation and autogenous cracking risk of slag–limestone filler-cement blended binders	158-167
Yan, Libo / Chouw, Nawawi / Jayaraman, Krishnan	Effect of column parameters on flax FRP confined coir fibre reinforced concrete	299-312
Mo, Kim Hung / Yap, Kathy Khai Qian / Alengaram, U. Johnson / Jumaat, Mohd Zamin	The effect of steel fibres on the enhancement of flexural and compressive toughness and fracture characteristics of oil palm shell concrete	20-28
Lin, Juntao / Hong, Jinxiang / Huang, Chong / Liu, Jiaping / Wu, Shaopeng	Effectiveness of rejuvenator seal materials on performance of asphalt pavement	63-68
Colajanni, Piero / Fossetti, Marinella / Macaluso, Giuseppe	Effects of confinement level, cross-section shape and corner radius on the cyclic behavior of CFRCM confined concrete columns	379-389
Reis, J. M. L. / Carvalho, A. R. / da Costa Mattos, H. S.	Effects of displacement rate and temperature on the fracture properties of polymer mortars	1-4
La Rosa, A. D. / Recca, A. / Gagliano, A. / Summerscales, J. / Latteri, A. / Cozzo, G. / Cicala, G.	Environmental impacts and thermal insulation performance of innovative composite solutions for building applications	406-414
Alejandre, F. J. / Flores-Alés, V. / Villegas, R. / García-Heras, J. / Morón, E.	Estimation of Portland cement mortar compressive strength using microcores. Influence of shape and size	359-364
Beygi, Morteza H. A. / Kazemi, Mohammad Taghi / Vaseghi Amiri, Javad / Nikbin, Iman M. / Rabbanifar, Saeed / Rahmani, Ebrahim	Evaluation of the effect of maximum aggregate size on fracture behavior of self compacting concrete	202-211
Najim, Khalid B. / Mahmod, Zaher S. / Atea, Abdul-Khaliq M.	Experimental investigation on using Cement Kiln Dust (CKD) as a cement replacement material in producing modified cement mortar	5-12
Singh, Varinder / Bansal, Prem Pal / Kumar, Maneek / Kaushik, S. K.	Experimental studies on strength and ductility of CFRP jacketed reinforced concrete beam-column joints	194-201
Maraveas, C. / Wang, Y. C. / Swailes, T.	Fire resistance of 19th century fireproof flooring systems: A sensitivity analysis	69-81
Borinaga-Treviño, Roque / Pascual-Muñoz, Pablo / Calzada-Perez, Miguel Angel / Castro-Fresno, Daniel	Freeze–thaw durability of cement-based geothermal grouting materials	390-397
Blyberg, Louise / Lang, Maria / Lundstedt, Karin / Schander, Matilda / Serrano, Erik / Silfverhielm, Magnus / Stålhandske, Christina	Glass, timber and adhesive joints – Innovative load bearing building components	470-478
Gao, Peng / Zhang, Tongsheng / Luo, Ruifeng / Wei, Jiangxiong / Yu, Qijun	Improvement of autogenous shrinkage measurement for cement paste at very early age: Corrugated tube method using non-contact sensors	57-62
Zou, Dujian / Liu, Tiejun / Teng, Jun / Du, Chengcheng / Li, Bo	Influence of creep and drying shrinkage of reinforced concrete shear walls on the axial shortening of high-rise buildings	46-56
Chang, Jun / Li, Yong / Cao, Mingli / Fang, Yanfeng	Influence of magnesium hydroxide content and fineness on the carbonation of calcium hydroxide	82-88
Mukharjee, Bibhuti Bhusan / Barai, Sudhirkumar V.	Influence of Nano-Silica on the properties of recycled aggregate concrete	29-37
Rosell, Joan Ramón / Haurie, Laia / Navarro, Antonia / Cantalapiedra, Inma R.	Influence of the traditional slaking process on the lime putty characteristics	423-430
Yang, Keun-Hyeok / Kim, Gwang-Hee / Choi, Yong-Hwa	An initial trial mixture proportioning procedure for structural lightweight aggregate concrete	431-439
Khiavi, Alireza Khavandi / Ameri, Mahmoud	Investigating the fatigue endurance limit of HMA mixture using RDEC approach	97-102
Holmes, Niall / Dunne, Kevin / O'Donnell, John	Longitudinal shear resistance of composite slabs containing crumb rubber in concrete toppings	365-378
Pasandín, A. R. / Pérez, I.	Mechanical properties of hot-mix asphalt made with recycled concrete aggregates coated with bitumen emulsion	350-358
Gao, Lei / Ni, Fujian / Braham, Andrew / Luo, Hailong	Mixed-Mode cracking behavior of cold recycled mixes with emulsion using Arcan configuration	415-422
Plevris, Vagelis / Asteris, Panagiotis G.	Modeling of masonry failure surface under biaxial compressive stress using Neural Networks	447-461
Jiménez Rivero, Ana / de Guzmán Báez, Ana / Navarro, Justo García	New composite gypsum plaster – ground waste rubber coming from pipe foam insulation	146-152
Alberti, M. G. / Enfedaque, A. / Gálvez, J. C.	On the mechanical properties and fracture behavior of polyolefin fiber-reinforced self-compacting concrete	274-288
San Nicolas, R. / Cyr, M. / Escadeillas, G.	Performance-based approach to durability of concrete containing flash-calcined metakaolin as cement replacement	313-322
Zhou, Wujun / Choi, Pangil / Saraf, Sureel / Ryu, Sung Woo / Won, Moon C.	Premature distresses at transverse construction joints (TCJs) in continuously reinforced concrete pavements	212-219
Sayadi, Ali A. / Rahman, Ahmad Baharuddin Abd. / Jumaat, Mohd Zamin Bin / Alengaram, U. Johnson / Ahmad, Sayadi	The relationship between interlocking mechanism and bond strength in elastic and inelastic segment of splice sleeve	227-237
Gul, Waqar Ahmed / Guler, Murat	Rutting susceptibility of asphalt concrete with recycled concrete aggregate using revised Marshall procedure	341-349
Badalassi, Massimo / Biolzi, Luigi / Royer-Carfagni, Gianni / Salvatore, Walter	Safety factors for the structural design of glass	114-127
van den Heede, Philip / De Belie, Nele	A service life based global warming potential for high-volume fly ash concrete exposed to carbonation	183-193
Zeng, Guowei / Yang, Xinhua / Yin, Anyi / Bai, Fan	Simulation of damage evolution and crack propagation in three-point bending pre-cracked asphalt mixture beam	323-332
Mohammed, Bashar S. / Abdullahi, M. / Hoong, C. K.	Statistical models for concrete containing wood chipping as partial replacement to fine aggregate	13-19
Mahjoub, Reza / Yatim, Jamaludin Mohamad / Sam, Abdul Rahman Mohd / Hashemi, Sayed Hamid	Tensile properties of kenaf fiber due to various conditions of chemical fiber surface modifications	103-113
Druta, Cristian / Wang, Linbing / Stephen Lane, D.	Tensile strength and paste–aggregate bonding characteristics of self-consolidating concrete	89-96
Cheng, Yunhong / Huang, Fei / Li, Guang-lu / Xu, Longshuo / Hou, Jianlong	Test research on effects of ceramic polishing powder on carbonation and sulphate-corrosion resistance of concrete	440-446
Alavez-Ramirez, R. / Chiñas-Castillo, F. / Morales-Dominguez, V. / Ortiz-Guzman, M. / Lara-Romero, J.	Thermal lag and decrement factor of a coconut-ferrocement roofing system	246-256
Teomete, Egemen	Transverse strain sensitivity of steel fiber reinforced cement composites tested by compression and split tensile tests	136-145
Goure-Doubi, H. / Lecomte-Nana, G. / Nait-Abbou, F. / Nait-Ali, B. / Smith, A. / Coudert, V. / Konan, L.	Understanding the strengthening of a lateritic "geomimetic" material	333-340
Väntsi, Olli / Kärki, Timo	Utilization of recycled mineral wool as filler in wood–polypropylene composites	220-226
Nuruddin, Muhd Fadhil / Chang, Kok Yung / Azmee, Norzaireen Mohd	Workability and compressive strength of ductile self compacting concrete (DSCC) with various cement replacement materials	153-157

Informations
sur cette fiche
IssueID
22526
Publié(e) le:
15.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - mars 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - mars 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.