Construction and Building Materials - February 2014

Published:	February 2014

Articles in this Issue

Author(s)	Title	Page(s)
Carrasco-Hurtado, B. / Corpas-Iglesias, F. A. / Cruz-Pérez, N. / Terrados-Cepeda, J. / Pérez-Villarejo, L.	Addition of bottom ash from biomass in calcium silicate masonry units for use as construction material with thermal insulating properties	155-165
Gao, Tao / Jelle, Bjørn Petter / Gustavsen, Arild / Jacobsen, Stefan	Aerogel-incorporated concrete: An experimental study	130-136
Vegas, I. / Gaitero, J. J. / Urreta, J. / García, R. / Frías, M.	Aging and durability of ternary cements containing fly ash and activated paper sludge	253-260
Bektas, Fatih	Alkali reactivity of crushed clay brick aggregate	79-85
Villegas, L. / Lombillo, I. / Boffill, Y.	Assessment of the initial shear strength of brickwork facade – concrete slab interface	404-412
Zheng, X. H. / Huang, P. Y. / Han, Q. / Chen, G. M.	Bond behavior of interface between CFL and concrete under static and fatigue load	33-41
Im, Soohyok / Ban, Hoki / Kim, Yong-Rak	Characterization of mode-I and mode-II fracture properties of fine aggregate matrix using a semicircular specimen geometry	413-421
Oliveira, Miguel José / Ribeiro, António Bettencourt / Branco, Fernando G.	Combined effect of expansive and shrinkage reducing admixtures to control autogenous shrinkage in self-compacting concrete	267-275
Rashad, Alaa M.	A comprehensive overview about the effect of nano-SiO2 on some properties of traditional cementitious materials and alkali-activated fly ash	437-464
Colajanni, Piero / De Domenico, Fabrizio / Recupero, Antonino / Spinella, Nino	Concrete columns confined with fibre reinforced cementitious mortars: Experimentation and modelling	375-384
Branco, M. / Gonçalves, A. / Guerreiro, L. / Ferreira, J.	Cyclic behavior of composite timber-masonry wall in quasi-dynamic conditions reinforced with superelastic damper	166-176
Aigbomian, Eboziegbe Patrick / Fan, Mizi	Development of wood-crete from treated sawdust	353-360
Pasandín, A. R. / Pérez, I.	Effect of ageing time on properties of hot-mix asphalt containing recycled concrete aggregates	284-293
Nikbin, I. M. / Beygi, M. H. A. / Kazemi, M. T. / Vaseghi Amiri, J. / Rahmani, E. / Rabbanifar, S. / Eslami, M.	Effect of coarse aggregate volume on fracture behavior of self compacting concrete	137-145
Cong, Peiliang / Xu, Peijun / Chen, Shuanfa	Effects of carbon black on the anti aging, rheological and conductive properties of SBS/asphalt/carbon black composites	306-313
Barbhuiya, Salim / Mukherjee, Shaswata / Nikraz, Hamid	Effects of nano-Al2O3 on early-age microstructural properties of cement paste	189-193
Ma, Bing / Li, Xuerun / Shen, Xiaodong / Mao, Yuyi / Huang, Hong	Enhancing the addition of fly ash from thermal power plants in activated high belite sulfoaluminate cement	261-266
Ciancio, Daniela / Mazzotti, Claudio / Buratti, Nicola	Evaluation of fibre-reinforced concrete fracture energy through tests on notched round determinate panels with different diameters	86-95
da Silva, W. R. L. / Lucena, D. S. / Štemberk, P. / Prudêncio, L. R.	Evaluation of the effect of concrete compositional changes and the use of ethyl-alcohol and biodegradable-oil-based release agents on the final surface appearance of self-compacting concrete precast elements	202-208
Millogo, Younoussa / Morel, Jean-Claude / Aubert, Jean-Emmanuel / Ghavami, Khosrow	Experimental analysis of Pressed Adobe Blocks reinforced with Hibiscus cannabinus fibers	71-78
Andreu, Gonzalez / Miren, Etxeberria	Experimental analysis of properties of high performance recycled aggregate concrete	227-235
Benzerzour, Mahfoud / Gagné, Richard / Abriak, Nor-Edine / Sebaibi, Nassim	Experimental and numerical study of the structural and cracking behavior of an overlaid slab panel under cyclic flexural loading	24-32
Shariati, Ali / Shariati, Mahdi / Ramli Sulong, N. H. / Suhatril, Meldi / Arabnejad Khanouki, M. M. / Mahoutian, Mehrdad	Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete	276-283
Richardson, Douglas / Tung, Ying / Tobias, Daniel / Hindi, Riyadh	An experimental study of bridge deck cracking using type K-cement	366-374
Thomas, C. / Setién, J. / Polanco, J. A. / Lombillo, I. / Cimentada, A.	Fatigue limit of recycled aggregate concrete	146-154
Wu, J. / Chew, S. H.	Field performance and numerical modeling of multi-layer pavement system subject to blast load	177-188
Sáez del Bosque, I. F. / Martinez-Ramirez, S. / Blanco-Varela, M. T.	FTIR study of the effect of temperature and nanosilica on the nano structure of C–S–H gel formed by hydrating tricalcium silicate	314-323
Siddique, Rafat / Rajor, Anita	Influence of bacterial treated cement kiln dust on the properties of concrete	42-51
Panesar, Daman K. / Francis, James	Influence of limestone and slag on the pore structure of cement paste based on mercury intrusion porosimetry and water vapour sorption measurements	52-58
Tan, Zhijun / De Schutter, Geert / Ye, Guang / Gao, Yun / Machiels, Lieven	Influence of particle size on the early hydration of slag particle activated by Ca(OH)2 solution	488-493
Fay, Liliana / Cooper, Paul / de Morais, Henrique Fay	Innovative interlocked soil–cement block for the construction of masonry to eliminate the settling mortar	391-395
Martinho, Edite / Dionísio, Amélia / Almeida, Fernando / Mendes, Manuela / Grangeia, Carlos	Integrated geophysical approach for stone decay diagnosis in cultural heritage	345-352
Zhang, Zhigang / Qian, Shunzhi / Ma, Hui	Investigating mechanical properties and self-healing behavior of micro-cracked ECC with different volume of fly ash	17-23
Darbhanzi, A. / Marefat, M. S. / Khanmohammadi, M.	Investigation of in-plane seismic retrofit of unreinforced masonry walls by means of vertical steel ties	122-129
Raftery, Gary M. / Whelan, Conor	Low-grade glued laminated timber beams reinforced using improved arrangements of bonded-in GFRP rods	209-220
Chavooshi, Arash / Madhoushi, Mehrab / Navi, Mohammad / Abareshi, Mohammad Yousef	MDF dust/PP composites reinforced with nanoclay: Morphology, long-term physical properties and withdrawal strength of fasteners in dry and saturated conditions	324-330
Lizarazo-Marriaga, Juan / Higuera, Camilo / Claisse, Peter	Measuring the effect of the ITZ on the transport related properties of mortar using electrochemical impedance	9-16
Jun, Yubin / Oh, Jae Eun	Mechanical and microstructural dissimilarities in alkali-activation for six Class F Korean fly ashes	396-403
Saikia, Nabajyoti / de Brito, Jorge	Mechanical properties and abrasion behaviour of concrete containing shredded PET bottle waste as a partial substitution of natural aggregate	236-244
Sinaie, S. / Heidarpour, A. / Zhao, X. L.	Mechanical properties of cyclically-damaged structural mild steel at elevated temperatures	465-472
Vu, H. M. / Forth, J. P.	Mechanisms of strength development in masonry units using blended organic binders	294-305
Gaedicke, Cristián / Marines, Armando / Miankodila, Farel	A method for comparing cores and cast cylinders in virgin and recycled aggregate pervious concrete	494-503
Li, Hui / Xu, Delong / Feng, Shaohang / Shang, Boming	Microstructure and performance of fly ash micro-beads in cementitious material system	422-427
Kavussi, A. / Qorbani, M. / Khodaii, A. / Haghshenas, H. F.	Moisture susceptibility of warm mix asphalt: A statistical analysis of the laboratory testing results	511-517
Essawy, Amr A. / Abd El Aleem, S.	Physico-mechanical properties, potent adsorptive and photocatalytic efficacies of sulfate resisting cement blends containing micro silica and nano-TiO2	1-8
Song, T.-H. / Lee, S.-H. / Kim, B.	Recycling of crushed stone powder as a partial replacement for silica powder in extruded cement panels	105-115
Volland, S. / Kazmina, O. / Vereshchagin, V. / Dushkina, M.	Recycling of sand sludge as a resource for lightweight aggregates	361-365
Bowers, Benjamin F. / Huang, Baoshan / Shu, Xiang	Refining laboratory procedure for artificial RAP: A comparative study	385-390
Yao, Dali / Jia, Jinqing / Wu, Feng / Yu, Fang	Shear performance of prestressed ultra high strength concrete encased steel beams	194-201
Slepski, Pawel / Gerengi, Husnu / Jazdzewska, Agata / Orlikowski, Juliusz / Darowicki, Kazimierz	Simultaneous impedance and volumetric studies and additionally potentiodynamic polarization measurements of molasses as a carbon steel corrosion inhibitor in 1M hydrochloric acid solution	482-487
de Carcer, Íñigo Aguirre / Masegosa, Rosa M. / Teresa Viñas, M. / Sanchez-Cabezudo, Marta / Salom, Catalina / Prolongo, Margarita G. / Contreras, Verónica / Barceló, Francisco / Paez, Antonio	Storage stability of SBS/sulfur modified bitumens at high temperature: Influence of bitumen composition and structure	245-252
Yang, En-Hua / Li, Victor C.	Strain-rate effects on the tensile behavior of strain-hardening cementitious composites	96-104
Yusuf, Moruf Olalekan / Megat Johari, Megat Azmi / Ahmad, Zainal Arifin / Maslehuddin, Mohammed	Strength and microstructure of alkali-activated binary blended binder containing palm oil fuel ash and ground blast-furnace slag	504-510
Li, Yinwen / Zhu, Huayu / Yang, Chaolong / Zhang, Yunfei / Xu, Jing / Lu, Mangeng	Synthesis and super retarding performance in cement production of diethanolamine modified lignin surfactant	116-121
Mijarsh, M. J. A. / Johari, M. A. Megat / Ahmad, Z. A.	Synthesis of geopolymer from large amounts of treated palm oil fuel ash: Application of the Taguchi method in investigating the main parameters affecting compressive strength	473-481
Bekkouche, S. M. A. / Benouaz, T. / Cherier, M. K. / Hamdani, M. / Benamrane, N. / Yaiche, M. R.	Thermal resistances of local building materials and their effect upon the interior temperatures case of a building located in Ghardaïa region	59-70
Lee, Sujeong / Jou, Hyeong-Tae / van Riessen, Arie / Rickard, William D. A. / Chon, Chul-Min / Kang, Nam-Hee	Three-dimensional quantification of pore structure in coal ash-based geopolymer using conventional electron tomography	221-226
del Coz Díaz, Juan José / Garcia-Nieto, Paulino José / Alvarez-Rabanal, Felipe Pedro / Alonso-Martínez, Mar / Dominguez-Hernandez, Javier / Pérez-Bella, Jose María	The use of response surface methodology to improve the thermal transmittance of lightweight concrete hollow bricks by FEM	331-344
Pajchrowski, Grzegorz / Noskowiak, Andrzej / Lewandowska, Anna / Strykowski, Wladysław	Wood as a building material in the light of environmental assessment of full life cycle of four buildings	428-436

About this
data sheet
IssueID
22524
Published on:
16/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - February 2014

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - February 2014

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.