Construction and Building Materials - février 2014

Publié:	février 2014

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Carrasco-Hurtado, B. / Corpas-Iglesias, F. A. / Cruz-Pérez, N. / Terrados-Cepeda, J. / Pérez-Villarejo, L.	Addition of bottom ash from biomass in calcium silicate masonry units for use as construction material with thermal insulating properties	155-165
Gao, Tao / Jelle, Bjørn Petter / Gustavsen, Arild / Jacobsen, Stefan	Aerogel-incorporated concrete: An experimental study	130-136
Vegas, I. / Gaitero, J. J. / Urreta, J. / García, R. / Frías, M.	Aging and durability of ternary cements containing fly ash and activated paper sludge	253-260
Bektas, Fatih	Alkali reactivity of crushed clay brick aggregate	79-85
Villegas, L. / Lombillo, I. / Boffill, Y.	Assessment of the initial shear strength of brickwork facade – concrete slab interface	404-412
Zheng, X. H. / Huang, P. Y. / Han, Q. / Chen, G. M.	Bond behavior of interface between CFL and concrete under static and fatigue load	33-41
Im, Soohyok / Ban, Hoki / Kim, Yong-Rak	Characterization of mode-I and mode-II fracture properties of fine aggregate matrix using a semicircular specimen geometry	413-421
Oliveira, Miguel José / Ribeiro, António Bettencourt / Branco, Fernando G.	Combined effect of expansive and shrinkage reducing admixtures to control autogenous shrinkage in self-compacting concrete	267-275
Rashad, Alaa M.	A comprehensive overview about the effect of nano-SiO2 on some properties of traditional cementitious materials and alkali-activated fly ash	437-464
Colajanni, Piero / De Domenico, Fabrizio / Recupero, Antonino / Spinella, Nino	Concrete columns confined with fibre reinforced cementitious mortars: Experimentation and modelling	375-384
Branco, M. / Gonçalves, A. / Guerreiro, L. / Ferreira, J.	Cyclic behavior of composite timber-masonry wall in quasi-dynamic conditions reinforced with superelastic damper	166-176
Aigbomian, Eboziegbe Patrick / Fan, Mizi	Development of wood-crete from treated sawdust	353-360
Pasandín, A. R. / Pérez, I.	Effect of ageing time on properties of hot-mix asphalt containing recycled concrete aggregates	284-293
Nikbin, I. M. / Beygi, M. H. A. / Kazemi, M. T. / Vaseghi Amiri, J. / Rahmani, E. / Rabbanifar, S. / Eslami, M.	Effect of coarse aggregate volume on fracture behavior of self compacting concrete	137-145
Cong, Peiliang / Xu, Peijun / Chen, Shuanfa	Effects of carbon black on the anti aging, rheological and conductive properties of SBS/asphalt/carbon black composites	306-313
Barbhuiya, Salim / Mukherjee, Shaswata / Nikraz, Hamid	Effects of nano-Al2O3 on early-age microstructural properties of cement paste	189-193
Ma, Bing / Li, Xuerun / Shen, Xiaodong / Mao, Yuyi / Huang, Hong	Enhancing the addition of fly ash from thermal power plants in activated high belite sulfoaluminate cement	261-266
Ciancio, Daniela / Mazzotti, Claudio / Buratti, Nicola	Evaluation of fibre-reinforced concrete fracture energy through tests on notched round determinate panels with different diameters	86-95
da Silva, W. R. L. / Lucena, D. S. / Štemberk, P. / Prudêncio, L. R.	Evaluation of the effect of concrete compositional changes and the use of ethyl-alcohol and biodegradable-oil-based release agents on the final surface appearance of self-compacting concrete precast elements	202-208
Millogo, Younoussa / Morel, Jean-Claude / Aubert, Jean-Emmanuel / Ghavami, Khosrow	Experimental analysis of Pressed Adobe Blocks reinforced with Hibiscus cannabinus fibers	71-78
Andreu, Gonzalez / Miren, Etxeberria	Experimental analysis of properties of high performance recycled aggregate concrete	227-235
Benzerzour, Mahfoud / Gagné, Richard / Abriak, Nor-Edine / Sebaibi, Nassim	Experimental and numerical study of the structural and cracking behavior of an overlaid slab panel under cyclic flexural loading	24-32
Shariati, Ali / Shariati, Mahdi / Ramli Sulong, N. H. / Suhatril, Meldi / Arabnejad Khanouki, M. M. / Mahoutian, Mehrdad	Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete	276-283
Richardson, Douglas / Tung, Ying / Tobias, Daniel / Hindi, Riyadh	An experimental study of bridge deck cracking using type K-cement	366-374
Thomas, C. / Setién, J. / Polanco, J. A. / Lombillo, I. / Cimentada, A.	Fatigue limit of recycled aggregate concrete	146-154
Wu, J. / Chew, S. H.	Field performance and numerical modeling of multi-layer pavement system subject to blast load	177-188
Sáez del Bosque, I. F. / Martinez-Ramirez, S. / Blanco-Varela, M. T.	FTIR study of the effect of temperature and nanosilica on the nano structure of C–S–H gel formed by hydrating tricalcium silicate	314-323
Siddique, Rafat / Rajor, Anita	Influence of bacterial treated cement kiln dust on the properties of concrete	42-51
Panesar, Daman K. / Francis, James	Influence of limestone and slag on the pore structure of cement paste based on mercury intrusion porosimetry and water vapour sorption measurements	52-58
Tan, Zhijun / De Schutter, Geert / Ye, Guang / Gao, Yun / Machiels, Lieven	Influence of particle size on the early hydration of slag particle activated by Ca(OH)2 solution	488-493
Fay, Liliana / Cooper, Paul / de Morais, Henrique Fay	Innovative interlocked soil–cement block for the construction of masonry to eliminate the settling mortar	391-395
Martinho, Edite / Dionísio, Amélia / Almeida, Fernando / Mendes, Manuela / Grangeia, Carlos	Integrated geophysical approach for stone decay diagnosis in cultural heritage	345-352
Zhang, Zhigang / Qian, Shunzhi / Ma, Hui	Investigating mechanical properties and self-healing behavior of micro-cracked ECC with different volume of fly ash	17-23
Darbhanzi, A. / Marefat, M. S. / Khanmohammadi, M.	Investigation of in-plane seismic retrofit of unreinforced masonry walls by means of vertical steel ties	122-129
Raftery, Gary M. / Whelan, Conor	Low-grade glued laminated timber beams reinforced using improved arrangements of bonded-in GFRP rods	209-220
Chavooshi, Arash / Madhoushi, Mehrab / Navi, Mohammad / Abareshi, Mohammad Yousef	MDF dust/PP composites reinforced with nanoclay: Morphology, long-term physical properties and withdrawal strength of fasteners in dry and saturated conditions	324-330
Lizarazo-Marriaga, Juan / Higuera, Camilo / Claisse, Peter	Measuring the effect of the ITZ on the transport related properties of mortar using electrochemical impedance	9-16
Jun, Yubin / Oh, Jae Eun	Mechanical and microstructural dissimilarities in alkali-activation for six Class F Korean fly ashes	396-403
Saikia, Nabajyoti / de Brito, Jorge	Mechanical properties and abrasion behaviour of concrete containing shredded PET bottle waste as a partial substitution of natural aggregate	236-244
Sinaie, S. / Heidarpour, A. / Zhao, X. L.	Mechanical properties of cyclically-damaged structural mild steel at elevated temperatures	465-472
Vu, H. M. / Forth, J. P.	Mechanisms of strength development in masonry units using blended organic binders	294-305
Gaedicke, Cristián / Marines, Armando / Miankodila, Farel	A method for comparing cores and cast cylinders in virgin and recycled aggregate pervious concrete	494-503
Li, Hui / Xu, Delong / Feng, Shaohang / Shang, Boming	Microstructure and performance of fly ash micro-beads in cementitious material system	422-427
Kavussi, A. / Qorbani, M. / Khodaii, A. / Haghshenas, H. F.	Moisture susceptibility of warm mix asphalt: A statistical analysis of the laboratory testing results	511-517
Essawy, Amr A. / Abd El Aleem, S.	Physico-mechanical properties, potent adsorptive and photocatalytic efficacies of sulfate resisting cement blends containing micro silica and nano-TiO2	1-8
Song, T.-H. / Lee, S.-H. / Kim, B.	Recycling of crushed stone powder as a partial replacement for silica powder in extruded cement panels	105-115
Volland, S. / Kazmina, O. / Vereshchagin, V. / Dushkina, M.	Recycling of sand sludge as a resource for lightweight aggregates	361-365
Bowers, Benjamin F. / Huang, Baoshan / Shu, Xiang	Refining laboratory procedure for artificial RAP: A comparative study	385-390
Yao, Dali / Jia, Jinqing / Wu, Feng / Yu, Fang	Shear performance of prestressed ultra high strength concrete encased steel beams	194-201
Slepski, Pawel / Gerengi, Husnu / Jazdzewska, Agata / Orlikowski, Juliusz / Darowicki, Kazimierz	Simultaneous impedance and volumetric studies and additionally potentiodynamic polarization measurements of molasses as a carbon steel corrosion inhibitor in 1M hydrochloric acid solution	482-487
de Carcer, Íñigo Aguirre / Masegosa, Rosa M. / Teresa Viñas, M. / Sanchez-Cabezudo, Marta / Salom, Catalina / Prolongo, Margarita G. / Contreras, Verónica / Barceló, Francisco / Paez, Antonio	Storage stability of SBS/sulfur modified bitumens at high temperature: Influence of bitumen composition and structure	245-252
Yang, En-Hua / Li, Victor C.	Strain-rate effects on the tensile behavior of strain-hardening cementitious composites	96-104
Yusuf, Moruf Olalekan / Megat Johari, Megat Azmi / Ahmad, Zainal Arifin / Maslehuddin, Mohammed	Strength and microstructure of alkali-activated binary blended binder containing palm oil fuel ash and ground blast-furnace slag	504-510
Li, Yinwen / Zhu, Huayu / Yang, Chaolong / Zhang, Yunfei / Xu, Jing / Lu, Mangeng	Synthesis and super retarding performance in cement production of diethanolamine modified lignin surfactant	116-121
Mijarsh, M. J. A. / Johari, M. A. Megat / Ahmad, Z. A.	Synthesis of geopolymer from large amounts of treated palm oil fuel ash: Application of the Taguchi method in investigating the main parameters affecting compressive strength	473-481
Bekkouche, S. M. A. / Benouaz, T. / Cherier, M. K. / Hamdani, M. / Benamrane, N. / Yaiche, M. R.	Thermal resistances of local building materials and their effect upon the interior temperatures case of a building located in Ghardaïa region	59-70
Lee, Sujeong / Jou, Hyeong-Tae / van Riessen, Arie / Rickard, William D. A. / Chon, Chul-Min / Kang, Nam-Hee	Three-dimensional quantification of pore structure in coal ash-based geopolymer using conventional electron tomography	221-226
del Coz Díaz, Juan José / Garcia-Nieto, Paulino José / Alvarez-Rabanal, Felipe Pedro / Alonso-Martínez, Mar / Dominguez-Hernandez, Javier / Pérez-Bella, Jose María	The use of response surface methodology to improve the thermal transmittance of lightweight concrete hollow bricks by FEM	331-344
Pajchrowski, Grzegorz / Noskowiak, Andrzej / Lewandowska, Anna / Strykowski, Wladysław	Wood as a building material in the light of environmental assessment of full life cycle of four buildings	428-436

Informations
sur cette fiche
IssueID
22524
Publié(e) le:
16.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - février 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - février 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.