Construction and Building Materials - January 2014

Published:	January 2014

Articles in this Issue

Author(s)	Title	Page(s)
Kabay, Nihat	Abrasion resistance and fracture energy of concretes with basalt fiber	95-101
Florea, M. V. A. / Ning, Z. / Brouwers, H. J. H.	Activation of liberated concrete fines and their application in mortars	1-12
Štukovnik, P. / Prinčič, T. / Pejovnik, R. S. / Bokan Bosiljkov, V.	Alkali-carbonate reaction in concrete and its implications for a high rate of long-term compressive strength increase	699-709
Nadal Gisbert, A. / Gadea Borrell, J. M. / Parres García, F. / Juliá Sanchis, E. / Crespo Amorós, J. E. / Segura Alcaraz, J. / Salas Vicente, F.	Analysis behaviour of static and dynamic properties of Ethylene-Propylene-Diene-Methylene crumb rubber mortar	671-682
Kuo, Wen-Ten / Shu, Chun-Ya	Application of high-temperature rapid catalytic technology to forecast the volumetric stability behavior of containing steel slag mixtures	463-470
Hadi, M. N. S. / Le, T. D.	Behaviour of hollow core square reinforced concrete columns wrapped with CFRP with different fibre orientations	62-73
Garcia, Reyes / Helal, Yasser / Pilakoutas, Kypros / Guadagnini, Maurizio	Bond behaviour of substandard splices in RC beams externally confined with CFRP	340-351
Ganesan, N. / Indira, P. V. / Sabeena, M. V.	Bond stress slip response of bars embedded in hybrid fibre reinforced high performance concrete	108-115
Mara, Valbona / Haghani, Reza / Harryson, Peter	Bridge decks of fibre reinforced polymer (FRP): A sustainable solution	190-199
Mohammed, Mahmoud Khashaa / Dawson, Andrew Robert / Thom, Nicholas Howard	Carbonation of filler typed self-compacting concrete and its impact on the microstructure by utilization of 100% CO2 accelerating techniques	508-516
Baltazar, Luis G. / Henriques, Fernando M. A. / Jorne, Fernando / Cidade, M. T.	Combined effect of superplasticizer, silica fume and temperature in the performance of natural hydraulic lime grouts	584-597
Kwan, Albert K. H. / Li, Leo G.	Combined effects of water film, paste film and mortar film thicknesses on fresh properties of concrete	598-608
André, A. / Kliger, R. / Asp, L. E.	Compression failure mechanism in small scale timber specimens	130-139
Wang, Shuangzhen	Compressive strengths of mortar cubes from hydrated lime with cofired biomass fly ashes	414-420
Moriyoshi, Akihiro / Jin, Toshiro / Nakai, Takaaki / Ishikawa, Hiroshi / Tokumitsu, Katsuya / Kasahara, Akihiko	Construction and pavement properties after seven years in porous asphalt with long life	401-413
Skuturna, Tomas / Valivonis, Juozas	Design method for calculating load-carrying capacity of reinforced concrete beams strengthened with external FRP	577-583
Azeiteiro, L. C. / Velosa, A. / Paiva, H. / Mantas, P. Q. / Ferreira, V. M. / Veiga, R.	Development of grouts for consolidation of old renders	352-360
Parlin, Nicholas J. / Davids, William G. / Nagy, Edwin / Cummins, Toney	Dynamic response of lightweight wood-based flexible wall panels to blast and impulse loading	237-245
Siddique, Rafat / Mehta, Ankur	Effect of carbon nanotubes on properties of cement mortars	116-129
Anagnostopoulos, Costas A.	Effect of different superplasticisers on the physical and mechanical properties of cement grouts	162-168
Nuruddin, Muhd Fadhil / Azmee, Norzaireen Mohd / Yung, Chang Kok	Effect of fire flame exposure on ductile self-compacting concrete (DSCC) blended with MIRHA and fly ash	388-393
Nahali, H. / Dhouibi, L. / Idrissi, H.	Effect of phosphate based inhibitor on the threshold chloride to initiate steel corrosion in saturated hydroxide solution	87-94
Okeniyi, Joshua Olusegun / Omotosho, Olugbenga Adeshola / Ajayi, Oluseyi Olanrewaju / Loto, Cleophas Akintoye	Effect of potassium-chromate and sodium-nitrite on concrete steel-rebar degradation in sulphate and saline media	448-456
Haruehansapong, Sattawat / Pulngern, Tawich / Chucheepsakul, Somchai	Effect of the particle size of nanosilica on the compressive strength and the optimum replacement content of cement mortar containing nano-SiO2	471-477
Tydlitát, Vratislav / Matas, Tomáš / Černý, Robert	Effect of w/c and temperature on the early-stage hydration heat development in Portland-limestone cement	140-147
Yusuf, Moruf Olalekan / Megat Johari, Megat Azmi / Ahmad, Zainal Arifin / Maslehuddin, Mohammad	Effects of addition of Al(OH)3 on the strength of alkaline activated ground blast furnace slag-ultrafine palm oil fuel ash (AAGU) based binder	361-367
Abdulkareem, Omar A. / Mustafa Al Bakri, A. M. / Kamarudin, H. / Khairul Nizar, I. / Saif, Ala'eddin A.	Effects of elevated temperatures on the thermal behavior and mechanical performance of fly ash geopolymer paste, mortar and lightweight concrete	377-387
Wang, Wei Chien	Effects of fly ash and lithium compounds on the water-soluble alkali and lithium content of cement specimens	727-735
Yokoyama, Yutaka / Yokoi, Takeshi / Ihara, Jun-ichi	The effects of pore size distribution and working techniques on the absorption and water content of concrete floor slab surfaces	560-566
Bernat-Maso, Ernest / Escrig, Christian / Aranha, Chrysl A. / Gil, Lluís	Experimental assessment of Textile Reinforced Sprayed Mortar strengthening system for brickwork wallettes	226-236
Barros, Ricardo S. / Oliveira, Daniel V. / Varum, Humberto / Alves, Carlos A. S. / Camões, Aires	Experimental characterization of physical and mechanical properties of schist from Portugal	617-630
Ahn, Namshik / Lee, Jaehong / Lee, Kangsu / Jang, Hwa Sup	An experimental study on flexural behavior for a FRP composite girder	13-21
Ibrahim, Ahmed / Mahmoud, Enad / Yamin, Mohammed / Patibandla, Varun Chowdary	Experimental study on Portland cement pervious concrete mechanical and hydrological properties	524-529
Hussain, Haleem K. / Liu, Gui Wei / Yong, Yu Wen	Experimental study to investigate mechanical properties of new material polyurethane–cement composite (PUC)	200-208
Ling, Jen Hua / Rahman, Ahmad Baharuddin Abd. / Ibrahim, Izni Syahrizal	Feasibility study of grouted splice connector under tensile load	530-539
Mechti, W. / Mnif, T. / Chaabouni, M. / Rouis, J.	Formulation of blended cement by the combination of two pozzolans: Calcined clay and finely ground sand	609-616
Jang, J. G. / Lee, N. K. / Lee, H. K.	Fresh and hardened properties of alkali-activated fly ash/slag pastes with superplasticizers	169-176
Nelson, Mark / Fam, Amir	Full bridge testing at scale constructed with novel FRP stay-in-place structural forms for concrete deck	368-376
Arellano-Aguilar, Raúl / Burciaga-Díaz, Oswaldo / Gorokhovsky, Alexander / Escalante-García, José Iván	Geopolymer mortars based on a low grade metakaolin: Effects of the chemical composition, temperature and aggregate:binder ratio	642-648
Lee, Chin-Hyung / Shin, Hyun-Seop / Park, Ki-Tae / Chang, Kyong-Ho	Impact fracture energy of structural steel welds constructed at low ambient temperatures	394-400
Sinica, Marijonas / Sezeman, Georgij A. / Mikulskis, Donatas / Kligys, Modestas / Česnauskas, Vytautas	Impact of complex additive consisting of continuous basalt fibres and SiO2 microdust on strength and heat resistance properties of autoclaved aerated concrete	718-726
El-Didamony, H. / Aiad, I. / Heikal, Mohamed / Al-Masry, S.	Impact of delayed addition time of SNF condensate on the fire resistance and durability of SRC–SF composite cement pastes	281-290
Mo, Kim Hung / Yap, Soon Poh / Alengaram, U. Johnson / Jumaat, Mohd Zamin / Bu, Chun Hooi	Impact resistance of hybrid fibre-reinforced oil palm shell concrete	499-507
Hu, Jiong / Ge, Zhi / Wang, Kejin	Influence of cement fineness and water-to-cement ratio on mortar early-age heat of hydration and set times	657-663
Deng, Yuhai / Zhang, Changqing / Wei, Xiaosheng	Influence of lithium sulfate addition on the properties of Portland cement paste	457-462
Gong, Meng / Delahunty, Stephen / Chui, Y. H.	Influence of number of finger joints per stud on mechanical performance of wood shearwalls	335-339
Jia, Xiaoyang / Huang, Baoshan / Bowers, Benjamin F. / Zhao, Sheng	Infrared spectra and rheological properties of asphalt cement containing waste engine oil residues	683-691
Hung, Tu-Cheng / Huang, Jong-Shin / Wang, Yi-Wen / Lin, Kuei-Yi	Inorganic polymeric foam as a sound absorbing and insulating material	328-334
Böer, Paul / Holliday, Lisa / Kang, Thomas H.-K.	Interaction of environmental factors on fiber-reinforced polymer composites and their inspection and maintenance: A review	209-218
Ahmad, Juraidah / Yusoff, Nur Izzi Md. / Hainin, Mohd Rosli / Rahman, Mohd Yusof Abd / Hossain, Mustaque	Investigation into hot-mix asphalt moisture-induced damage under tropical climatic conditions	567-576
Ng, Kenny / Sun, Ye / Dai, Qingli / Yu, Xiong	Investigation of internal frost damage in cementitious materials with micromechanics analysis, SEM imaging and ultrasonic wave scattering techniques	478-485
Bowers, Benjamin F. / Huang, Baoshan / Shu, Xiang / Miller, Brad C.	Investigation of Reclaimed Asphalt Pavement blending efficiency through GPC and FTIR	517-523
Mymrin, V. / Meyer, S. A. S. / Alekseev, K. P. / Pawlowsky, U. / Fernandes, L. H. / Scremim, C. B. / Catai, R. E.	Manufacture of a construction material using the physicochemical properties of ash and sludge wastes from MDF board production	184-189
Kim, Yail J. / Siriwardanage, Thushara / Hmidan, Amer / Seo, Junwon	Material characteristics and residual bond properties of organic and inorganic resins for CFRP composites in thermal exposure	631-641
Mpalaskas, A. C. / Thanasia, O. V. / Matikas, T. E. / Aggelis, D. G.	Mechanical and fracture behavior of cement-based materials characterized by combined elastic wave approaches	649-656
Binici, Hanifi / Aksogan, Orhan / Sevinç, Ahmet Hayrullah / Kucukonder, Adnan	Mechanical and radioactivity shielding performances of mortars made with colemanite, barite, ground basaltic pumice and ground blast furnace slag	177-183
Nam, BooHyun / Maherinia, Hamid / Behzadan, Amir H.	Mechanical characterization of asphalt tear-off roofing shingles in Hot Mix Asphalt	308-316
Ambroziak, Andrzej / Kłosowski, Paweł	Mechanical properties for preliminary design of structures made from PVC coated fabric	74-81
Rovero, L. / Tonietti, U.	A modified corbelling theory for domes with horizontal layers	50-61
Sindu, B. S. / Sasmal, Saptarshi / Gopinath, Smitha	A multi-scale approach for evaluating the mechanical characteristics of carbon nanotube incorporated cementitious composites	317-327
Christodoulou, C. / Goodier, C. I. / Austin, S. A. / Glass, G. K. / Webb, J.	A new arrangement of galvanic anodes for the repair of reinforced concrete structures	300-307
Gesualdo, Francisco Antonio Romero / Cunha, Thais Alves / Rezende, Romulo Barbosa	Numerical and experimental evaluation of a double inverted trussed beam reinforced with steel cable	736-743
Ng, Kenny / Dai, Qingli	Numerical investigation of internal frost damage of digital cement paste samples with cohesive zone modeling and SEM microstructure characterization	266-275
Krizkova, Michaela Crhova / Kuckova, Stepanka Hrdlickova / Santrucek, Jiri / Hynek, Radovan	Peptide mass mapping as an effective tool for historical mortar analysis	219-225
Duplan, F. / Abou-Chakra, A. / Turatsinze, A. / Escadeillas, G. / Brule, S. / Masse, F.	Prediction of modulus of elasticity based on micromechanics theory and application to low-strength mortars	437-447
Mirza, Jahangir / Durand, Benoit / Bhutta, Aamer R. / Tahir, Mahmood M.	Preferred test methods to select suitable surface repair materials in severe climates	692-698
Du, Bing / Zhou, Changbo / Dan, Zhigang / Luan, Zhaokun / Duan, Ning	Preparation and characteristics of steam-autoclaved bricks produced from electrolytic manganese solid waste	291-299
Arslan, Deniz / Gürü, Metin / Çubuk, M. Kürşat	Preventing of rutting and crackings in the bituminous mixtures by monoethylene and diethylene glycol based synthetic polyboron compounds	102-107
Sheen, Yeong-Nain / Wang, Her-Yung / Sun, Te-Ho	Properties of green concrete containing stainless steel oxidizing slag resource materials	22-27
Elsaid, Adel / Seracino, Rudolf	Rapid assessment of foundation scour using the dynamic features of bridge superstructure	42-49
Takeda, Hayami / Hashimoto, Shinobu / Matsui, Hiromu / Honda, Sawao / Iwamoto, Yuji	Rapid fabrication of highly dense geopolymers using a warm press method and their ability to absorb neutron irradiation	82-86
Aliabdo, Ali A. / Abd Elmoaty, Abd Elmoaty M. / Auda, Esraa M.	Re-use of waste marble dust in the production of cement and concrete	28-41
Waijarean, Naprarath / Asavapisit, Suwimol / Sombatsompop, Kwannate	Strength and microstructure of water treatment residue-based geopolymers containing heavy metals	486-491
Singh, Malkit / Siddique, Rafat	Strength properties and micro-structural properties of concrete containing coal bottom ash as partial replacement of fine aggregate	246-256
Nguyen, P. T. / Amiri, O.	Study of electrical double layer effect on chloride transport in unsaturated concrete	492-498
Zhang, Qin / Gong, Jinxin	Study on seismic behavior of reinforced concrete columns after ECE treatment	549-559
Wang, Her-Yung / Zeng, Hsueh-hsiung / Wu, Jia-Yan	A study on the macro and micro properties of concrete with LCD glass	664-670
Bai, Gang / Guo, Chuigen / Li, Liping	Synergistic effect of intumescent flame retardant and expandable graphite on mechanical and flame-retardant properties of wood flour-polypropylene composites	148-153
Rahman, M. K. / Baluch, M. H. / Malik, M. A.	Thixotropic behavior of self compacting concrete with different mineral admixtures	710-717
She, Wei / Zhang, Yunsheng / Jones, M. R.	Three-dimensional numerical modeling and simulation of the thermal properties of foamed concrete	421-431
Torkaman, Javad / Ashori, Alireza / Sadr Momtazi, Ali	Using wood fiber waste, rice husk ash, and limestone powder waste as cement replacement materials for lightweight concrete blocks	432-436
Anastasiou, E. / Georgiadis Filikas, K. / Stefanidou, M.	Utilization of fine recycled aggregates in concrete with fly ash and steel slag	154-161
Zhao, Sujing / Fan, Junjiang / Sun, Wei	Utilization of iron ore tailings as fine aggregate in ultra-high performance concrete	540-548
Cheng, Zhibao / Shi, Zhifei	Vibration attenuation properties of periodic rubber concrete panels	257-265
Liu, Ying / Gong, Meng / Li, Ling / Chui, Y. H.	Width effect on the modulus of elasticity of hardwood lumber measured by non-destructive evaluation techniques	276-280

About this
data sheet
IssueID
22521
Published on:
13/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - January 2014

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - January 2014

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.