Construction and Building Materials - janvier 2014

Publié:	janvier 2014

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Kabay, Nihat	Abrasion resistance and fracture energy of concretes with basalt fiber	95-101
Florea, M. V. A. / Ning, Z. / Brouwers, H. J. H.	Activation of liberated concrete fines and their application in mortars	1-12
Štukovnik, P. / Prinčič, T. / Pejovnik, R. S. / Bokan Bosiljkov, V.	Alkali-carbonate reaction in concrete and its implications for a high rate of long-term compressive strength increase	699-709
Nadal Gisbert, A. / Gadea Borrell, J. M. / Parres García, F. / Juliá Sanchis, E. / Crespo Amorós, J. E. / Segura Alcaraz, J. / Salas Vicente, F.	Analysis behaviour of static and dynamic properties of Ethylene-Propylene-Diene-Methylene crumb rubber mortar	671-682
Kuo, Wen-Ten / Shu, Chun-Ya	Application of high-temperature rapid catalytic technology to forecast the volumetric stability behavior of containing steel slag mixtures	463-470
Hadi, M. N. S. / Le, T. D.	Behaviour of hollow core square reinforced concrete columns wrapped with CFRP with different fibre orientations	62-73
Garcia, Reyes / Helal, Yasser / Pilakoutas, Kypros / Guadagnini, Maurizio	Bond behaviour of substandard splices in RC beams externally confined with CFRP	340-351
Ganesan, N. / Indira, P. V. / Sabeena, M. V.	Bond stress slip response of bars embedded in hybrid fibre reinforced high performance concrete	108-115
Mara, Valbona / Haghani, Reza / Harryson, Peter	Bridge decks of fibre reinforced polymer (FRP): A sustainable solution	190-199
Mohammed, Mahmoud Khashaa / Dawson, Andrew Robert / Thom, Nicholas Howard	Carbonation of filler typed self-compacting concrete and its impact on the microstructure by utilization of 100% CO2 accelerating techniques	508-516
Baltazar, Luis G. / Henriques, Fernando M. A. / Jorne, Fernando / Cidade, M. T.	Combined effect of superplasticizer, silica fume and temperature in the performance of natural hydraulic lime grouts	584-597
Kwan, Albert K. H. / Li, Leo G.	Combined effects of water film, paste film and mortar film thicknesses on fresh properties of concrete	598-608
André, A. / Kliger, R. / Asp, L. E.	Compression failure mechanism in small scale timber specimens	130-139
Wang, Shuangzhen	Compressive strengths of mortar cubes from hydrated lime with cofired biomass fly ashes	414-420
Moriyoshi, Akihiro / Jin, Toshiro / Nakai, Takaaki / Ishikawa, Hiroshi / Tokumitsu, Katsuya / Kasahara, Akihiko	Construction and pavement properties after seven years in porous asphalt with long life	401-413
Skuturna, Tomas / Valivonis, Juozas	Design method for calculating load-carrying capacity of reinforced concrete beams strengthened with external FRP	577-583
Azeiteiro, L. C. / Velosa, A. / Paiva, H. / Mantas, P. Q. / Ferreira, V. M. / Veiga, R.	Development of grouts for consolidation of old renders	352-360
Parlin, Nicholas J. / Davids, William G. / Nagy, Edwin / Cummins, Toney	Dynamic response of lightweight wood-based flexible wall panels to blast and impulse loading	237-245
Siddique, Rafat / Mehta, Ankur	Effect of carbon nanotubes on properties of cement mortars	116-129
Anagnostopoulos, Costas A.	Effect of different superplasticisers on the physical and mechanical properties of cement grouts	162-168
Nuruddin, Muhd Fadhil / Azmee, Norzaireen Mohd / Yung, Chang Kok	Effect of fire flame exposure on ductile self-compacting concrete (DSCC) blended with MIRHA and fly ash	388-393
Nahali, H. / Dhouibi, L. / Idrissi, H.	Effect of phosphate based inhibitor on the threshold chloride to initiate steel corrosion in saturated hydroxide solution	87-94
Okeniyi, Joshua Olusegun / Omotosho, Olugbenga Adeshola / Ajayi, Oluseyi Olanrewaju / Loto, Cleophas Akintoye	Effect of potassium-chromate and sodium-nitrite on concrete steel-rebar degradation in sulphate and saline media	448-456
Haruehansapong, Sattawat / Pulngern, Tawich / Chucheepsakul, Somchai	Effect of the particle size of nanosilica on the compressive strength and the optimum replacement content of cement mortar containing nano-SiO2	471-477
Tydlitát, Vratislav / Matas, Tomáš / Černý, Robert	Effect of w/c and temperature on the early-stage hydration heat development in Portland-limestone cement	140-147
Yusuf, Moruf Olalekan / Megat Johari, Megat Azmi / Ahmad, Zainal Arifin / Maslehuddin, Mohammad	Effects of addition of Al(OH)3 on the strength of alkaline activated ground blast furnace slag-ultrafine palm oil fuel ash (AAGU) based binder	361-367
Abdulkareem, Omar A. / Mustafa Al Bakri, A. M. / Kamarudin, H. / Khairul Nizar, I. / Saif, Ala'eddin A.	Effects of elevated temperatures on the thermal behavior and mechanical performance of fly ash geopolymer paste, mortar and lightweight concrete	377-387
Wang, Wei Chien	Effects of fly ash and lithium compounds on the water-soluble alkali and lithium content of cement specimens	727-735
Yokoyama, Yutaka / Yokoi, Takeshi / Ihara, Jun-ichi	The effects of pore size distribution and working techniques on the absorption and water content of concrete floor slab surfaces	560-566
Bernat-Maso, Ernest / Escrig, Christian / Aranha, Chrysl A. / Gil, Lluís	Experimental assessment of Textile Reinforced Sprayed Mortar strengthening system for brickwork wallettes	226-236
Barros, Ricardo S. / Oliveira, Daniel V. / Varum, Humberto / Alves, Carlos A. S. / Camões, Aires	Experimental characterization of physical and mechanical properties of schist from Portugal	617-630
Ahn, Namshik / Lee, Jaehong / Lee, Kangsu / Jang, Hwa Sup	An experimental study on flexural behavior for a FRP composite girder	13-21
Ibrahim, Ahmed / Mahmoud, Enad / Yamin, Mohammed / Patibandla, Varun Chowdary	Experimental study on Portland cement pervious concrete mechanical and hydrological properties	524-529
Hussain, Haleem K. / Liu, Gui Wei / Yong, Yu Wen	Experimental study to investigate mechanical properties of new material polyurethane–cement composite (PUC)	200-208
Ling, Jen Hua / Rahman, Ahmad Baharuddin Abd. / Ibrahim, Izni Syahrizal	Feasibility study of grouted splice connector under tensile load	530-539
Mechti, W. / Mnif, T. / Chaabouni, M. / Rouis, J.	Formulation of blended cement by the combination of two pozzolans: Calcined clay and finely ground sand	609-616
Jang, J. G. / Lee, N. K. / Lee, H. K.	Fresh and hardened properties of alkali-activated fly ash/slag pastes with superplasticizers	169-176
Nelson, Mark / Fam, Amir	Full bridge testing at scale constructed with novel FRP stay-in-place structural forms for concrete deck	368-376
Arellano-Aguilar, Raúl / Burciaga-Díaz, Oswaldo / Gorokhovsky, Alexander / Escalante-García, José Iván	Geopolymer mortars based on a low grade metakaolin: Effects of the chemical composition, temperature and aggregate:binder ratio	642-648
Lee, Chin-Hyung / Shin, Hyun-Seop / Park, Ki-Tae / Chang, Kyong-Ho	Impact fracture energy of structural steel welds constructed at low ambient temperatures	394-400
Sinica, Marijonas / Sezeman, Georgij A. / Mikulskis, Donatas / Kligys, Modestas / Česnauskas, Vytautas	Impact of complex additive consisting of continuous basalt fibres and SiO2 microdust on strength and heat resistance properties of autoclaved aerated concrete	718-726
El-Didamony, H. / Aiad, I. / Heikal, Mohamed / Al-Masry, S.	Impact of delayed addition time of SNF condensate on the fire resistance and durability of SRC–SF composite cement pastes	281-290
Mo, Kim Hung / Yap, Soon Poh / Alengaram, U. Johnson / Jumaat, Mohd Zamin / Bu, Chun Hooi	Impact resistance of hybrid fibre-reinforced oil palm shell concrete	499-507
Hu, Jiong / Ge, Zhi / Wang, Kejin	Influence of cement fineness and water-to-cement ratio on mortar early-age heat of hydration and set times	657-663
Deng, Yuhai / Zhang, Changqing / Wei, Xiaosheng	Influence of lithium sulfate addition on the properties of Portland cement paste	457-462
Gong, Meng / Delahunty, Stephen / Chui, Y. H.	Influence of number of finger joints per stud on mechanical performance of wood shearwalls	335-339
Jia, Xiaoyang / Huang, Baoshan / Bowers, Benjamin F. / Zhao, Sheng	Infrared spectra and rheological properties of asphalt cement containing waste engine oil residues	683-691
Hung, Tu-Cheng / Huang, Jong-Shin / Wang, Yi-Wen / Lin, Kuei-Yi	Inorganic polymeric foam as a sound absorbing and insulating material	328-334
Böer, Paul / Holliday, Lisa / Kang, Thomas H.-K.	Interaction of environmental factors on fiber-reinforced polymer composites and their inspection and maintenance: A review	209-218
Ahmad, Juraidah / Yusoff, Nur Izzi Md. / Hainin, Mohd Rosli / Rahman, Mohd Yusof Abd / Hossain, Mustaque	Investigation into hot-mix asphalt moisture-induced damage under tropical climatic conditions	567-576
Ng, Kenny / Sun, Ye / Dai, Qingli / Yu, Xiong	Investigation of internal frost damage in cementitious materials with micromechanics analysis, SEM imaging and ultrasonic wave scattering techniques	478-485
Bowers, Benjamin F. / Huang, Baoshan / Shu, Xiang / Miller, Brad C.	Investigation of Reclaimed Asphalt Pavement blending efficiency through GPC and FTIR	517-523
Mymrin, V. / Meyer, S. A. S. / Alekseev, K. P. / Pawlowsky, U. / Fernandes, L. H. / Scremim, C. B. / Catai, R. E.	Manufacture of a construction material using the physicochemical properties of ash and sludge wastes from MDF board production	184-189
Kim, Yail J. / Siriwardanage, Thushara / Hmidan, Amer / Seo, Junwon	Material characteristics and residual bond properties of organic and inorganic resins for CFRP composites in thermal exposure	631-641
Mpalaskas, A. C. / Thanasia, O. V. / Matikas, T. E. / Aggelis, D. G.	Mechanical and fracture behavior of cement-based materials characterized by combined elastic wave approaches	649-656
Binici, Hanifi / Aksogan, Orhan / Sevinç, Ahmet Hayrullah / Kucukonder, Adnan	Mechanical and radioactivity shielding performances of mortars made with colemanite, barite, ground basaltic pumice and ground blast furnace slag	177-183
Nam, BooHyun / Maherinia, Hamid / Behzadan, Amir H.	Mechanical characterization of asphalt tear-off roofing shingles in Hot Mix Asphalt	308-316
Ambroziak, Andrzej / Kłosowski, Paweł	Mechanical properties for preliminary design of structures made from PVC coated fabric	74-81
Rovero, L. / Tonietti, U.	A modified corbelling theory for domes with horizontal layers	50-61
Sindu, B. S. / Sasmal, Saptarshi / Gopinath, Smitha	A multi-scale approach for evaluating the mechanical characteristics of carbon nanotube incorporated cementitious composites	317-327
Christodoulou, C. / Goodier, C. I. / Austin, S. A. / Glass, G. K. / Webb, J.	A new arrangement of galvanic anodes for the repair of reinforced concrete structures	300-307
Gesualdo, Francisco Antonio Romero / Cunha, Thais Alves / Rezende, Romulo Barbosa	Numerical and experimental evaluation of a double inverted trussed beam reinforced with steel cable	736-743
Ng, Kenny / Dai, Qingli	Numerical investigation of internal frost damage of digital cement paste samples with cohesive zone modeling and SEM microstructure characterization	266-275
Krizkova, Michaela Crhova / Kuckova, Stepanka Hrdlickova / Santrucek, Jiri / Hynek, Radovan	Peptide mass mapping as an effective tool for historical mortar analysis	219-225
Duplan, F. / Abou-Chakra, A. / Turatsinze, A. / Escadeillas, G. / Brule, S. / Masse, F.	Prediction of modulus of elasticity based on micromechanics theory and application to low-strength mortars	437-447
Mirza, Jahangir / Durand, Benoit / Bhutta, Aamer R. / Tahir, Mahmood M.	Preferred test methods to select suitable surface repair materials in severe climates	692-698
Du, Bing / Zhou, Changbo / Dan, Zhigang / Luan, Zhaokun / Duan, Ning	Preparation and characteristics of steam-autoclaved bricks produced from electrolytic manganese solid waste	291-299
Arslan, Deniz / Gürü, Metin / Çubuk, M. Kürşat	Preventing of rutting and crackings in the bituminous mixtures by monoethylene and diethylene glycol based synthetic polyboron compounds	102-107
Sheen, Yeong-Nain / Wang, Her-Yung / Sun, Te-Ho	Properties of green concrete containing stainless steel oxidizing slag resource materials	22-27
Elsaid, Adel / Seracino, Rudolf	Rapid assessment of foundation scour using the dynamic features of bridge superstructure	42-49
Takeda, Hayami / Hashimoto, Shinobu / Matsui, Hiromu / Honda, Sawao / Iwamoto, Yuji	Rapid fabrication of highly dense geopolymers using a warm press method and their ability to absorb neutron irradiation	82-86
Aliabdo, Ali A. / Abd Elmoaty, Abd Elmoaty M. / Auda, Esraa M.	Re-use of waste marble dust in the production of cement and concrete	28-41
Waijarean, Naprarath / Asavapisit, Suwimol / Sombatsompop, Kwannate	Strength and microstructure of water treatment residue-based geopolymers containing heavy metals	486-491
Singh, Malkit / Siddique, Rafat	Strength properties and micro-structural properties of concrete containing coal bottom ash as partial replacement of fine aggregate	246-256
Nguyen, P. T. / Amiri, O.	Study of electrical double layer effect on chloride transport in unsaturated concrete	492-498
Zhang, Qin / Gong, Jinxin	Study on seismic behavior of reinforced concrete columns after ECE treatment	549-559
Wang, Her-Yung / Zeng, Hsueh-hsiung / Wu, Jia-Yan	A study on the macro and micro properties of concrete with LCD glass	664-670
Bai, Gang / Guo, Chuigen / Li, Liping	Synergistic effect of intumescent flame retardant and expandable graphite on mechanical and flame-retardant properties of wood flour-polypropylene composites	148-153
Rahman, M. K. / Baluch, M. H. / Malik, M. A.	Thixotropic behavior of self compacting concrete with different mineral admixtures	710-717
She, Wei / Zhang, Yunsheng / Jones, M. R.	Three-dimensional numerical modeling and simulation of the thermal properties of foamed concrete	421-431
Torkaman, Javad / Ashori, Alireza / Sadr Momtazi, Ali	Using wood fiber waste, rice husk ash, and limestone powder waste as cement replacement materials for lightweight concrete blocks	432-436
Anastasiou, E. / Georgiadis Filikas, K. / Stefanidou, M.	Utilization of fine recycled aggregates in concrete with fly ash and steel slag	154-161
Zhao, Sujing / Fan, Junjiang / Sun, Wei	Utilization of iron ore tailings as fine aggregate in ultra-high performance concrete	540-548
Cheng, Zhibao / Shi, Zhifei	Vibration attenuation properties of periodic rubber concrete panels	257-265
Liu, Ying / Gong, Meng / Li, Ling / Chui, Y. H.	Width effect on the modulus of elasticity of hardwood lumber measured by non-destructive evaluation techniques	276-280

Informations
sur cette fiche
IssueID
22521
Publié(e) le:
13.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - janvier 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - janvier 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.