Construction and Building Materials - October 2013

Published:	October 2013

Articles in this Issue

Author(s)	Title	Page(s)
Yim, Hong Jae / Kim, Jae Hong / Lee, Bang Yeon / Kwak, Hyo-Gyoung	Air voids size distribution determined by ultrasonic attenuation	502-510
Bumanis, G. / Bajare, D. / Locs, J. / Korjakins, A.	Alkali-silica reactivity of foam glass granules in structure of lightweight concrete	274-281
Yang, Zhengxian / Fischer, H. / Cerezo, J. / Mol, J. M. C. / Polder, R.	Aminobenzoate modified MgAl hydrotalcites as a novel smart additive of reinforced concrete for anticorrosion applications	1436-1443
Wang, Hainian / Dang, Zhengxia / Li, Lian / You, Zhanping	Analysis on fatigue crack growth laws for crumb rubber modified (CRM) asphalt mixture	1342-1349
Yoo, Sung-Won / Koh, Kyung-Taek / Kwon, Seung-Jun / Park, Sun Gyu	Analysis technique for flexural behavior in RC beam considering autogenous shrinkage effect	560-568
Serpa, D. / Santos Silva, A. / de Brito, J. / Pontes, J. / Soares, D.	ASR of mortars containing glass	489-495
Thives, Liseane P. / Pais, Jorge C. / Pereira, Paulo A. A. / Trichês, Glicério / Amorim, Sara R.	Assessment of the digestion time of asphalt rubber binder based on microscopy analysis	431-440
Karaca, Zeki / Gürcan, Sevgi / Gökçe, Mehmedi Vehbi / Sivrikaya, Osman	Assessment of the results of the pendulum friction tester (EN 14231) for natural building stones used as floor-coverings	1182-1187
Ganesh Prabhu, G. / Sundarraja, M. C.	Behaviour of concrete filled steel tubular (CFST) short columns externally reinforced using CFRP strips composite	1362-1371
Singh, L. P. / Karade, S. R. / Bhattacharyya, S. K. / Yousuf, M. M. / Ahalawat, S.	Beneficial role of nanosilica in cement based materials – A review	1069-1077
Wang, Wei-Jer / Wu, Chun-Hao	Benefits of adding rice straw coke powder to cement mortar and the subsequent reduction of carbon emissions	616-622
Murthy, A. Ramachandra / Karihaloo, B. L. / Iyer, Nagesh R. / Prasad, B. K. Raghu	Bilinear tension softening diagrams of concrete mixes corresponding to their size-independent specific fracture energy	1160-1166
Lee, Dongkeun / Cheng, Lijuan	Bond of NSM systems in concrete strengthening – Examining design issues of strength, groove detailing and bond-dependent coefficient	1512-1522
Khatib, J. M. / Herki, B. A. / Kenai, S.	Capillarity of concrete incorporating waste foundry sand	867-871
Wei, She / Yiqiang, Chen / Yunsheng, Zhang / Jones, M. R.	Characterization and simulation of microstructure and thermal properties of foamed concrete	1278-1291
Rovnaník, Pavel / Bayer, Patrik / Rovnaníková, Pavla	Characterization of alkali activated slag paste after exposure to high temperatures	1479-1487
Aggelis, D. G. / Verbruggen, S. / Tsangouri, E. / Tysmans, T. / Van Hemelrijck, D.	Characterization of mechanical performance of concrete beams with external reinforcement by acoustic emission and digital image correlation	1037-1045
Siad, H. / Kamali-Bernard, S. / Mesbah, H. A. / Escadeillas, G. / Mouli, M. / Khelafi, H.	Characterization of the degradation of self-compacting concretes in sodium sulfate environment: Influence of different mineral admixtures	1188-1200
Zhang, Yuqing / Luo, Rong / Lytton, Robert L.	Characterization of viscoplastic yielding of asphalt concrete	671-679
Yao, Yuan / Li, Yu / Liu, Xiaoming / Jiang, Shushu / Feng, Chao / Rafanan, Ester	Characterization on a cementitious material composed of red mud and coal industry byproducts	496-501
Qiao, Pizhong / Chen, Fangliang	Cohesive fracture and probabilistic damage analysis of freezing–thawing degradation of concrete	879-887
Bagheri, Alireza / Zanganeh, Hamed / Alizadeh, Hadi / Shakerinia, Mohammad / Marian, Mohammad Ali Seifi	Comparing the performance of fine fly ash and silica fume in enhancing the properties of concretes containing fly ash	1402-1408
Rashad, Alaa M.	A comprehensive overview about the influence of different additives on the properties of alkali-activated slag – A guide for Civil Engineer	29-55
Siddique, Rafat	Compressive strength, water absorption, sorptivity, abrasion resistance and permeability of self-compacting concrete containing coal bottom ash	1444-1450
Cherrak, Messaouda / Bali, Abderrahim / Silhadi, Kamel	Concrete mix design containing calcareous tuffs as a partial sand substitution	318-323
Ji, Yong-sheng / Zhao, Wen / Zhou, Min / Ma, Hui-rong / Zeng, Ping	Corrosion current distribution of macrocell and microcell of steel bar in concrete exposed to chloride environments	104-110
Hamzah, Meor Othman / Golchin, Babak / Tye, Ching Thian	Determination of the optimum binder content of warm mix asphalt incorporating Rediset using response surface method	1328-1336
Phung, Quoc Tri / Maes, Norbert / De Schutter, Geert / Jacques, Diederik / Ye, Guang	Determination of water permeability of cementitious materials using a controlled constant flow method	1488-1496
Shyshko, Sergiy / Mechtcherine, Viktor	Developing a Discrete Element Model for simulating fresh concrete: Experimental investigation and modelling of interactions between discrete aggregate particles with fine mortar between them	601-615
FarhangVesali, Nima / Valipour, Hamid / Samali, Bijan / Foster, Stephen	Development of arching action in longitudinally-restrained reinforced concrete beams	7-19
Anh Tuan, Bui Le / Hwang, Chao-Lung / Lin, Kae-Long / Chen, Yuan-Yuan / Young, Mung-Pei	Development of lightweight aggregate from sewage sludge and waste glass powder for concrete	334-339
Wang, Brad Jianhe / Dai, Chunping	Development of structural laminated veneer lumber from stress graded short-rotation hem-fir veneer	902-909
Breakah, Tamer M. / Williams, R. Christopher	Dynamic testing of hot mix asphalt for moisture susceptibility assessment	636-642
Aubert, J. E. / Fabbri, A. / Morel, J. C. / Maillard, P.	An earth block with a compressive strength higher than 45MPa!	366-369
Bouharoun, Samir / De Caro, Pascale / Dubois, Isabelle / Djelal, Chafika / Vanhove, Yannick	Effect of a superplasticizer on the properties of the concrete/oil/formwork interface	1137-1144
Beglarigale, Ahsanollah / Yazɩcɩ, Halit	The effect of alkali–silica reaction on steel fiber–matrix bond characteristics of cement based mortars	845-860
Rahmani, Eisa / Darabi, Masoud K. / Abu Al-Rub, Rashid K. / Kassem, Emad / Masad, Eyad A. / Little, Dallas N.	Effect of confinement pressure on the nonlinear-viscoelastic response of asphalt concrete at high temperatures	779-788
Tastani, S. P. / Balafas, I. / Dervisis, A. / Pantazopoulou, S. J.	Effect of core compaction on deformation capacity of FRP-jacketed concrete columns	1078-1092
Mardani-Aghabaglou, Ali / Tuyan, Murat / Yılmaz, Gökhan / Arioz, Omer / Ramyar, Kambiz	Effect of different types of superplasticizer on fresh, rheological and strength properties of self-consolidating concrete	1020-1025
Tan, Yiqiu / Ouyang, Jian / Lv, Jianfu / Li, Yunliang	Effect of emulsifier on cement hydration in cement asphalt mortar	159-164
Zhang, Haiyan / Wu, Xiaowei / Cao, Dongwei / Zhang, Yanjun / He, Min	Effect of linear low density-polyethylene grafted with maleic anhydride (LLDPE-g-MAH) on properties of high density-polyethylene/styrene–butadiene–styrene (HDPE/SBS) modified asphalt	192-198
Tittarelli, Francesca / Shah, Surendra P.	Effect of low dosages of waste GRP dust on fresh and hardened properties of mortars: Part 1	1532-1538
Tittarelli, Francesca	Effect of low dosages of waste GRP dust on fresh and hardened properties of mortars: Part 2	1539-1543
Bonati, Alice / Merusi, Filippo / Bochicchio, Giovanna / Tessadri, Barbara / Polacco, Giovanni / Filippi, Sara / Giuliani, Felice	Effect of nanoclay and conventional flame retardants on asphalt mixtures fire reaction	990-1000
Bederina, M. / Makhloufi, Z. / Bounoua, A. / Bouziani, T. / Queneudec, M.	Effect of partial and total replacement of siliceous river sand with limestone crushed sand on the durability of mortars exposed to chemical solutions	146-158
Chen, Yuan-Yuan / Anh Tuan, Bui Le / Hwang, Chao-Lung	Effect of paste amount on the properties of self-consolidating concrete containing fly ash and slag	340-346
Yan, Kezhen / Zhang, Henglong / Xu, Hongbin	Effect of polyphosphoric acid on physical properties, chemical composition and morphology of bitumen	92-98
Butler, Liam / West, Jeffrey S. / Tighe, Susan L.	Effect of recycled concrete coarse aggregate from multiple sources on the hardened properties of concrete with equivalent compressive strength	1292-1301
Kang, Seok Hee / Kim, Jung Jin / Kim, Dong joo / Chung, Young-Soo	Effect of sand grain size and sand-to-cement ratio on the interfacial bond strength of steel fibers embedded in mortars	1421-1430
Güneyisi, Erhan / Gesoǧlu, Mehmet / İpek, Süleyman	Effect of steel fiber addition and aspect ratio on bond strength of cold-bonded fly ash lightweight aggregate concretes	358-365
Kocak, Yilmaz / Tascı, Eda / Kaya, Unal	The effect of using natural zeolite on the properties and hydration characteristics of blended cements	720-727
Luo, Fu Jia / He, Li / Pan, Zhu / Duan, Wen Hui / Zhao, Xiao Ling / Collins, Frank	Effect of very fine particles on workability and strength of concrete made with dune sand	131-137
Sanchez-Alonso, Elsa / Vega-Zamanillo, Angel / Calzada-Perez, Miguel Angel / Castro-Fresno, Daniel	Effect of warm additives on rutting and fatigue behaviour of asphalt mixtures	240-244
Borowicz, David T. / Bank, Lawrence C.	Effect of web reinforcement on the behavior of pultruded fiber-reinforced polymer beams subjected to concentrated loads	347-357
Zheng, Jian-Jun / Zhou, Xin-Zhu	Effective medium method for predicting the chloride diffusivity in concrete with ITZ percolation effect	1093-1098
Chaudhary, Muhammad Tariq A.	Effectiveness of Impact Echo testing in detecting flaws in prestressed concrete slabs	753-759
Shin, Myoungsu / Choi, Yoon-Young / Kim, Ick-Hyun / Lee, Kihak	Effectiveness of low-cost fiber-reinforced cement composites in hollow columns under cyclic loading	623-635
Demirdag, S.	Effects of freezing–thawing and thermal shock cycles on physical and mechanical properties of filled and unfilled travertines	1395-1401
Nguyen, Hung Viet	Effects of mixing procedures and rap sizes on stiffness distribution of hot recycled asphalt mixtures	728-742
Ranjbar, Malek Mohammad / Madandoust, Rahmat / Mousavi, S. Yasin / Yosefi, Saman	Effects of natural zeolite on the fresh and hardened properties of self-compacted concrete	806-813
Saribiyik, Mehmet / Piskin, Abdullah / Saribiyik, Ali	The effects of waste glass powder usage on polymer concrete properties	840-844
Sobhani, Jafar / Najimi, Meysam	Electrochemical impedance behavior and transport properties of silica fume contained concrete	910-918
Santilli, A. / Puente, I.	An empirical model to predict fresh concrete lateral pressure	379-388
Peyvandi, Amirpasha / Soroushian, Parviz / Balachandra, Anagi M. / Sobolev, Konstantin	Enhancement of the durability characteristics of concrete nanocomposite pipes with modified graphite nanoplatelets	111-117
Hesami, Saeid / Roshani, Hossein / Hamedi, Gholam Hossein / Azarhoosh, Alireza	Evaluate the mechanism of the effect of hydrated lime on moisture damage of warm mix asphalt	935-941
Hamidi, Moussa / Kacimi, Larbi / Cyr, Martin / Clastres, Pierre	Evaluation and improvement of pozzolanic activity of andesite for its use in eco-efficient cement	1268-1277
Hu, Shaowei / Lu, Jun / Xiao, Feipeng	Evaluation of concrete fracture procedure based on acoustic emission parameters	1249-1256
Lu, Xiaobin / Sun, Qichen / Feng, Wei / Tian, Juntao	Evaluation of dynamic modulus of elasticity of concrete using impact-echo method	231-239
Das, Prabir Kumar / Jelagin, Denis / Birgisson, Björn	Evaluation of the low temperature cracking performance of asphalt mixtures utilizing HMA fracture mechanics	594-600
Shon, Chang-Seon / Kim, Young-Su	Evaluation of West Texas natural zeolite as an alternative of ASTM Class F fly ash	389-396
Chen, Xudong / Wu, Shengxing / Zhou, Jikai	Experimental and modeling study of dynamic mechanical properties of cement paste, mortar and concrete	419-430
Milosevic, Jelena / Gago, António Sousa / Lopes, Mário / Bento, Rita	Experimental assessment of shear strength parameters on rubble stone masonry specimens	1372-1380
Zhang, Mo / Guo, Hong / El-Korchi, Tahar / Zhang, Guoping / Tao, Mingjiang	Experimental feasibility study of geopolymer as the next-generation soil stabilizer	1468-1478
Nobili, A. / Lanzoni, L. / Tarantino, A. M.	Experimental investigation and monitoring of a polypropylene-based fiber reinforced concrete road pavement	888-895
Chen, Xudong / Wu, Shengxing / Zhou, Jikai	Experimental study and analytical formulation of mechanical behavior of concrete	662-670
Aggelis, D. G. / Momoki, S. / Shiotani, T.	Experimental study of nonlinear wave parameters in mortar	1409-1413
Masi, A. / Chiauzzi, L.	An experimental study on the within-member variability of in situ concrete strength in RC building structures	951-961
Wang, Debin / Li, Hong-Nan / Li, Gang	Experimental tests on reinforced concrete columns under multi-dimensional dynamic loadings	1167-1181
Sukmak, Patimapon / Horpibulsuk, Suksun / Shen, Shui-Long / Chindaprasirt, Prinya / Suksiripattanapong, Cherdsak	Factors influencing strength development in clay–fly ash geopolymer	1125-1136
Li, Yue / Chen, Bing	Factors that affect the properties of magnesium phosphate cement	977-983
Zhang, X. B. / Aljewifi, H. / Li, J.	Failure behaviour investigation of continuous yarn reinforced cementitious composites	456-464
Baylor, G. / Harte, A. M.	Finite element modelling of castellated timber I-joists	680-688
López, Cristina / Firmo, João P. / Correia, João R. / Tiago, Carlos	Fire protection systems for reinforced concrete slabs strengthened with CFRP laminates	324-333
Pająk, M. / Ponikiewski, T.	Flexural behavior of self-compacting concrete reinforced with different types of steel fibers	397-408
Jin, Shanshan / Zhang, Jinxi / Huang, Baoshan	Fractal analysis of effect of air void on freeze–thaw resistance of concrete	126-130
Ramos, Telma / Matos, Ana Mafalda / Schmidt, Bruno / Rio, João / Sousa-Coutinho, Joana	Granitic quarry sludge waste in mortar: Effect on strength and durability	1001-1009
Radonjanin, Vlastimir / Malešev, Mirjana / Marinković, Snežana / Al Malty, Ali Emhemd Saed	Green recycled aggregate concrete	1503-1511
Labropoulos, Kyriakos / Moropoulou, Antonia	Ground penetrating radar investigation of the bell tower of the church of the Holy Sepulchre	689-700
Lu, Ye / Li, Jianchun / Ye, Lin / Wang, Dong	Guided waves for damage detection in rebar-reinforced concrete beams	370-378
Hammiche, Dalila / Boukerrou, Amar / Djidjelli, Hocine / Corre, Yves-Marie / Grohens, Yves / Pillin, Isabelle	Hydrothermal ageing of alfa fiber reinforced polyvinylchloride composites	293-300
Liu, Huajie / Bu, Yuhuan / Guo, Shenglai	Improvement of aluminium powder application measure based on influence of gas hole on strength properties of oil well cement	480-488
Sellami, A. / Merzoud, M. / Amziane, S.	Improvement of mechanical properties of green concrete by treatment of the vegetals fibers	1117-1124
Noorvand, Hassan / Abang Ali, Abang Abdullah / Demirboğa, Ramazan / Farzadnia, Nima / Noorvand, Hossein	Incorporation of nano TiO2 in black rice husk ash mortars	1350-1361
Yurtdas, I. / Chen, D. / Hu, D. W. / Shao, J. F.	Influence of alkali silica reaction (ASR) on mechanical properties of mortar	165-174
Ye, Hailong / Tian, Ye / Jin, Nanguo / Jin, Xianyu / Fu, Chuanqing	Influence of cracking on chloride diffusivity and moisture influential depth in concrete subjected to simulated environmental conditions	66-79
Vincent, Thomas / Ozbakkaloglu, Togay	Influence of fiber orientation and specimen end condition on axial compressive behavior of FRP-confined concrete	814-826
Wang, Qiang / Yan, Peiyu / Yang, Jianwei / Zhang, Bo	Influence of steel slag on mechanical properties and durability of concrete	1414-1420
Mendoza, Oscar / Sierra, Germán / Tobón, Jorge I.	Influence of super plasticizer and Ca(OH)2 on the stability of functionalized multi-walled carbon nanotubes dispersions for cement composites applications	771-778
Nejad, F. Moghadas / Arabani, M. / Hamedi, GH H. / Azarhoosh, A. R.	Influence of using polymeric aggregate treatment on moisture damage in hot mix asphalt	1523-1527
Amaro, Bárbara / Saraiva, Diogo / de Brito, Jorge / Flores-Colen, Inês	Inspection and diagnosis system of ETICS on walls	1257-1267
Modarres, Amir	Investigating the toughness and fatigue behavior of conventional and SBS modified asphalt mixes	218-222
Xie, Yanjun / Mo, Liantong / Su, Donglin / Woldekidan, M. F. / Wu, Shaopeng	Investigation into fundamental properties of bituminous plug expansion joint filling mixtures containing rubber granules	984-989
Morova, Nihat	Investigation of usability of basalt fibers in hot mix asphalt concrete	175-180
Attom, M. / Hawileh, R. / Naser, M.	Investigation on concrete compressive strength mixed with sand contaminated by crude oil products	99-103
Khiavi, Alireza Khavandi / Ameri, Mahmoud	Laboratory evaluation of strain controlled fatigue criteria in hot mix asphalt	1497-1502
Martínez-Barrera, Gonzalo / Vigueras-Santiago, Enrique / Martínez-López, Miguel / Ribeiro, Maria C. S. / Ferreira, Antonio J. M. / Brostow, Witold	Luffa fibers and gamma radiation as improvement tools of polymer concrete	86-91
Soutsos, M. N. / Turu'allo, G. / Owens, K. / Kwasny, J. / Barnett, S. J. / Basheer, P. A. M.	Maturity testing of lightweight self-compacting and vibrated concretes	118-125
Liu, Feng / Zheng, Wanhu / Li, Lijuan / Feng, Wenxian / Ning, Guofang	Mechanical and fatigue performance of rubber concrete	711-719
Ashtiani, Mohammad Soleymani / Scott, Allan N. / Dhakal, Rajesh P.	Mechanical and fresh properties of high-strength self-compacting concrete containing class C fly ash	1217-1224
Abd Elmoaty, Abd Elmoaty Mohamed	Mechanical properties and corrosion resistance of concrete modified with granite dust	743-752
Ryu, Gum Sung / Lee, Young Bok / Koh, Kyung Taek / Chung, Young Soo	The mechanical properties of fly ash-based geopolymer concrete with alkaline activators	409-418
Kolovos, K. G. / Asteris, P. G. / Cotsovos, D. M. / Badogiannis, E. / Tsivilis, S.	Mechanical properties of soilcrete mixtures modified with metakaolin	1026-1036
Rovero, L. / Fratini, F.	The Medina of Chefchaouen (Morocco): A survey on morphological and mechanical features of the masonries	465-479
Tang, S. B. / Yu, Q. L. / Li, H. / Yu, C. Y. / Bao, C. Y. / Tang, C. A.	Mesomechanical model of moisture diffusion and shrinkage cracking in building material – Model development	511-529
Sepulcre Aguilar, Alberto / Pinilla Melo, Javier / Hernández Olivares, Francisco	Microstructural analysis of aerated cement pastes with fly ash, Metakaolin and Sepiolite additions	282-292
Ma, Hongyan / Li, Zongjin	Microstructures and mechanical properties of polymer modified mortars under distinct mechanisms	579-587
Zhang, Henglong / Xu, Hongbin / Wang, Xiaoliang / Yu, Jianying	Microstructures and thermal aging mechanism of expanded vermiculite modified bitumen	919-926
Yurdakul, Murat / Akdaş, Hürriyet	Modeling uniaxial compressive strength of building stones using non-destructive test results as neural networks input parameters	1010-1019
Biscaia, Hugo C. / Chastre, Carlos / Silva, Manuel A. G.	Modelling GFRP-to-concrete joints with interface finite elements with rupture based on the Mohr-Coulomb criterion	261-273
Ohemeng, Eric Ababio / Yalley, Peter Paa-Kofi	Models for predicting the density and compressive strength of rubberized concrete pavement blocks	656-661
de Bruijn, Paulien / Johansson, Peter	Moisture fixation and thermal properties of lime–hemp concrete	1235-1242
Romano, Pedro / Brito, Paulo S. D. / Rodrigues, Luiz	Monitoring of the degradation of concrete structures in environments containing chloride ions	827-832
Ventolà, L. / Vendrell, M. / Giraldez, P.	Newly-designed traditional lime mortar with a phase change material as an additive	1210-1216
Fortino, Stefania / Genoese, Alessandra / Genoese, Andrea / Nunes, Lina / Palma, Pedro	Numerical modelling of the hygro-thermal response of timber bridges during their service life: A monitoring case-study	1225-1234
Fiore, Andrea / Porco, Francesco / Uva, Giuseppina / Mezzina, Mauro	On the dispersion of data collected by in situ diagnostic of the existing concrete	208-217
Rahmani, E. / Dehestani, M. / Beygi, M. H. A. / Allahyari, H. / Nikbin, I. M.	On the mechanical properties of concrete containing waste PET particles	1302-1308
Serrano, Susana / Barreneche, Camila / Rincón, Lídia / Boer, Dieter / Cabeza, Luisa F.	Optimization of three new compositions of stabilized rammed earth incorporating PCM: Thermal properties characterization and LCA	872-878
Binhussain, Mohammed A. / El-Tonsy, Maher M.	Palm leave and plastic waste wood composite for out-door structures	1431-1435
Alrifai, Amjad / Aggoun, Salima / Kadri, Abdelkader / Kenai, Said / Kadri, El-Hadj	Paste and mortar studies on the influence of mix design parameters on autogenous shrinkage of self-compacting concrete	969-976
Gruyaert, E. / Maes, M. / De Belie, N.	Performance of BFS concrete: k-Value concept versus equivalent performance concept	441-455
El-Chabib, Hassan / Ibrahim, Ahmed	The performance of high-strength flowable concrete made with binary, ternary, or quaternary binder in hot climate	245-253
Tan, Yiqiu / Guo, Meng / Cao, Liping / Zhang, Lei	Performance optimization of composite modified asphalt sealant based on rheological behavior	799-805
Lima, Carmine / Caggiano, Antonio / Faella, Ciro / Martinelli, Enzo / Pepe, Marco / Realfonzo, Roberto	Physical properties and mechanical behaviour of concrete made with recycled aggregates and fly ash	547-559
AL-Salami, A. E. / Morsy, M. S. / Taha, S. / Shoukry, H.	Physico-mechanical characteristics of blended white cement pastes containing thermally activated ultrafine nano clays	138-145
Anania, Laura / Badalá, Antonio / D'Agata, Giuseppe	The post strengthening of the masonry vaults by the Ω-Wrap technique based on the use of C-FRP	1053-1068
Jamil, M. / Kaish, A. B. M. A. / Raman, S. N. / Zain, M. F. M.	Pozzolanic contribution of rice husk ash in cementitious system	588-593
Posi, Patcharapol / Lertnimoolchai, Surasit / Sata, Vanchai / Chindaprasirt, Prinya	Pressed lightweight concrete containing calcined diatomite aggregate	896-901
Ryan, Paraic C. / O'Connor, Alan J.	Probabilistic analysis of the time to chloride induced corrosion for different Self-Compacting Concretes	1106-1116
Zhang, Lianyang	Production of bricks from waste materials – A review	643-655
Mirza, Jahangir / Saleh, Kaveh / Langevin, Marc-André / Mirza, Saeed / Bhutta, Muhammad Aamer Rafique / Tahir, Mahmood Md.	Properties of microfine cement grouts at 4°C, 10°C and 20°C	1145-1153
Bhutta, Muhammad Aamer Rafique / Hasanah, Nor / Farhayu, Nur / Hussin, Mohd Warid / Tahir, Mahmood bin Md / Mirza, J.	Properties of porous concrete from waste crushed concrete (recycled aggregate)	1243-1248
Chen, Can / Williams, R. Christopher / Ahmed EI., Taha / Lee, Hosin "David" / Schram, Scott	Quality control/quality assurance testing for longitudinal joint density and segregation of asphalt mixtures	80-85
Silva, Rui A. / Oliveira, Daniel V. / Miranda, Tiago / Cristelo, Nuno / Escobar, Maria C. / Soares, Edgar	Rammed earth construction with granitic residual soils: The case study of northern Portugal	181-191
Abo-El-Enein, S. A. / Heikal, Mohamed / Amin, M. S. / Negm, H. H.	Reactivity of dealuminated kaolin and burnt kaolin using cement kiln dust or hydrated lime as activators	1451-1460
Behnam, Bashar / Eamon, Christopher	Reliability-based design optimization of concrete flexural members reinforced with ductile FRP bars	942-950
Tian, Ye / Jin, Xian-Yu / Jin, Nan-guo / Zhao, Ruoyi / Li, Zong-jin / Ma, Hong-yan	Research on the microstructure formation of polyacrylate latex modified mortars	1381-1394
Kogbara, Reginald B. / Iyengar, Srinath R. / Grasley, Zachary C. / Masad, Eyad A. / Zollinger, Dan G.	A review of concrete properties at cryogenic temperatures: Towards direct LNG containment	760-770
Gholami, Mehran / Sam, Abdul Rahman Mohd / Yatim, Jamaludin Mohamad / Tahir, Mahmood Md	A review on steel/CFRP strengthening systems focusing environmental performance	301-310
Khadivar, Alireza / Kavussi, Amir	Rheological characteristics of SBR and NR polymer modified bitumen emulsions at average pavement temperatures	1099-1105
Paje, S. E. / Luong, J. / Vázquez, V. F. / Bueno, M. / Miró, R.	Road pavement rehabilitation using a binder with a high content of crumb rubber: Influence on noise reduction	789-798
Lee, N. K. / Lee, H. K.	Setting and mechanical properties of alkali-activated fly ash/slag concrete manufactured at room temperature	1201-1209
Manalo, A. C. / Aravinthan, T. / Karunasena, W.	Shear behaviour of glued structural fibre composite sandwich beams	1317-1327
Díaz de Terán, José Ramón / Turmo, José / Jorquera-Lucerga, Juan José / Barragán, Bryan E. / Ramos, Gonzalo / Aparicio, Ángel Carlos	Shear-off strength of compact reinforcement splicing for improved construction of in situ concrete structures	199-207
Yang, Keun-Hyeok / Mun, Jae-Sung / Shim, Hyun-Ju	Shrinkage of heavyweight magnetite concrete with and without fly ash	56-65
Arizio, Elena / Piazza, Rossano / Cairns, Warren R. L. / Appolonia, Lorenzo / Botteon, Alessandra	Statistical analysis on ancient mortars: A case study of the Balivi Tower in Aosta (Italy)	1309-1316
Katzer, Jacek	Strength performance comparison of mortars made with waste fine aggregate and ceramic fume	1-6
Carr, A. J. / Jauregui, D. V. / Riveiro, B. / Arias, P. / Armesto, J.	Structural evaluation of historic masonry arch bridges based on first hinge formation	569-578
Breccolotti, Marco / Materazzi, Annibale Luigi	Structural reliability of bonding between steel rebars and recycled aggregate concrete	927-934
Van Thanh, Dang / Feng, Cheng Pei	Study on Marshall and Rutting test of SMA at abnormally high temperature	1337-1341
Tan, Yiqiu / Guo, Meng	Study on the phase behavior of asphalt mastic	311-317
Wang, Hainian / Zhang, Chen / Yang, Lian / You, Zhanping	Study on the rubber-modified asphalt mixtures' cracking propagation using the extended finite element method	223-230
Yılmaz, Salih / Özen, Muhammet Ali / Yardim, Yavuz	Tensile behavior of post-installed chemical anchors embedded to low strength concrete	861-866
Teomete, Egemen / Kocyigit, Ozgun Ilkim	Tensile strain sensitivity of steel fiber reinforced cement matrix composites tested by split tensile test	962-968
Gao, Y. / Chow, W. K. / Wu, M.	Thermal performance of window glass panes in an enclosure fire	530-546
Dondi, Giulio / Pettinari, Matteo / Sangiorgi, Cesare / Zoorob, Salah E.	Traditional and Dissipated Energy approaches to compare the 2PB and 4PB flexural methodologies on a Warm Mix Asphalt	833-839
Magee, B. J. / Basheer, P. A. M. / Bai, Y. / Long, A. E. / McCarter, W. J. / Jin, W. L. / Zhao, Y. X.	UK–China Science Bridge – Sustainable solutions for the built environment	20-28
Sua-iam, Gritsada / Makul, Natt	Use of recycled alumina as fine aggregate replacement in self-compacting concrete	701-710
Poinot, Thomas / Benyahia, Kawtar / Govin, Alexandre / Jeanmaire, Thomas / Grosseau, Philippe	Use of ultrasonic degradation to study the molecular weight influence of polymeric admixtures for mortars	1046-1052
Tan, Yiqiu / Guo, Meng	Using surface free energy method to study the cohesion and adhesion of asphalt mastic	254-260
Xia, Yanqing / Yan, Yun / Hu, Zhihua	Utilization of circulating fluidized bed fly ash in preparing non-autoclaved aerated concrete production	1461-1467
Tanyildizi, Harun	Variance analysis of crack characteristics of structural lightweight concrete containing silica fume exposed to high temperature	1154-1159

About this
data sheet
IssueID
22513
Published on:
13/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - October 2013

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - October 2013

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.