Construction and Building Materials - octobre 2013

Publié:	octobre 2013

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Yim, Hong Jae / Kim, Jae Hong / Lee, Bang Yeon / Kwak, Hyo-Gyoung	Air voids size distribution determined by ultrasonic attenuation	502-510
Bumanis, G. / Bajare, D. / Locs, J. / Korjakins, A.	Alkali-silica reactivity of foam glass granules in structure of lightweight concrete	274-281
Yang, Zhengxian / Fischer, H. / Cerezo, J. / Mol, J. M. C. / Polder, R.	Aminobenzoate modified MgAl hydrotalcites as a novel smart additive of reinforced concrete for anticorrosion applications	1436-1443
Wang, Hainian / Dang, Zhengxia / Li, Lian / You, Zhanping	Analysis on fatigue crack growth laws for crumb rubber modified (CRM) asphalt mixture	1342-1349
Yoo, Sung-Won / Koh, Kyung-Taek / Kwon, Seung-Jun / Park, Sun Gyu	Analysis technique for flexural behavior in RC beam considering autogenous shrinkage effect	560-568
Serpa, D. / Santos Silva, A. / de Brito, J. / Pontes, J. / Soares, D.	ASR of mortars containing glass	489-495
Thives, Liseane P. / Pais, Jorge C. / Pereira, Paulo A. A. / Trichês, Glicério / Amorim, Sara R.	Assessment of the digestion time of asphalt rubber binder based on microscopy analysis	431-440
Karaca, Zeki / Gürcan, Sevgi / Gökçe, Mehmedi Vehbi / Sivrikaya, Osman	Assessment of the results of the pendulum friction tester (EN 14231) for natural building stones used as floor-coverings	1182-1187
Ganesh Prabhu, G. / Sundarraja, M. C.	Behaviour of concrete filled steel tubular (CFST) short columns externally reinforced using CFRP strips composite	1362-1371
Singh, L. P. / Karade, S. R. / Bhattacharyya, S. K. / Yousuf, M. M. / Ahalawat, S.	Beneficial role of nanosilica in cement based materials – A review	1069-1077
Wang, Wei-Jer / Wu, Chun-Hao	Benefits of adding rice straw coke powder to cement mortar and the subsequent reduction of carbon emissions	616-622
Murthy, A. Ramachandra / Karihaloo, B. L. / Iyer, Nagesh R. / Prasad, B. K. Raghu	Bilinear tension softening diagrams of concrete mixes corresponding to their size-independent specific fracture energy	1160-1166
Lee, Dongkeun / Cheng, Lijuan	Bond of NSM systems in concrete strengthening – Examining design issues of strength, groove detailing and bond-dependent coefficient	1512-1522
Khatib, J. M. / Herki, B. A. / Kenai, S.	Capillarity of concrete incorporating waste foundry sand	867-871
Wei, She / Yiqiang, Chen / Yunsheng, Zhang / Jones, M. R.	Characterization and simulation of microstructure and thermal properties of foamed concrete	1278-1291
Rovnaník, Pavel / Bayer, Patrik / Rovnaníková, Pavla	Characterization of alkali activated slag paste after exposure to high temperatures	1479-1487
Aggelis, D. G. / Verbruggen, S. / Tsangouri, E. / Tysmans, T. / Van Hemelrijck, D.	Characterization of mechanical performance of concrete beams with external reinforcement by acoustic emission and digital image correlation	1037-1045
Siad, H. / Kamali-Bernard, S. / Mesbah, H. A. / Escadeillas, G. / Mouli, M. / Khelafi, H.	Characterization of the degradation of self-compacting concretes in sodium sulfate environment: Influence of different mineral admixtures	1188-1200
Zhang, Yuqing / Luo, Rong / Lytton, Robert L.	Characterization of viscoplastic yielding of asphalt concrete	671-679
Yao, Yuan / Li, Yu / Liu, Xiaoming / Jiang, Shushu / Feng, Chao / Rafanan, Ester	Characterization on a cementitious material composed of red mud and coal industry byproducts	496-501
Qiao, Pizhong / Chen, Fangliang	Cohesive fracture and probabilistic damage analysis of freezing–thawing degradation of concrete	879-887
Bagheri, Alireza / Zanganeh, Hamed / Alizadeh, Hadi / Shakerinia, Mohammad / Marian, Mohammad Ali Seifi	Comparing the performance of fine fly ash and silica fume in enhancing the properties of concretes containing fly ash	1402-1408
Rashad, Alaa M.	A comprehensive overview about the influence of different additives on the properties of alkali-activated slag – A guide for Civil Engineer	29-55
Siddique, Rafat	Compressive strength, water absorption, sorptivity, abrasion resistance and permeability of self-compacting concrete containing coal bottom ash	1444-1450
Cherrak, Messaouda / Bali, Abderrahim / Silhadi, Kamel	Concrete mix design containing calcareous tuffs as a partial sand substitution	318-323
Ji, Yong-sheng / Zhao, Wen / Zhou, Min / Ma, Hui-rong / Zeng, Ping	Corrosion current distribution of macrocell and microcell of steel bar in concrete exposed to chloride environments	104-110
Hamzah, Meor Othman / Golchin, Babak / Tye, Ching Thian	Determination of the optimum binder content of warm mix asphalt incorporating Rediset using response surface method	1328-1336
Phung, Quoc Tri / Maes, Norbert / De Schutter, Geert / Jacques, Diederik / Ye, Guang	Determination of water permeability of cementitious materials using a controlled constant flow method	1488-1496
Shyshko, Sergiy / Mechtcherine, Viktor	Developing a Discrete Element Model for simulating fresh concrete: Experimental investigation and modelling of interactions between discrete aggregate particles with fine mortar between them	601-615
FarhangVesali, Nima / Valipour, Hamid / Samali, Bijan / Foster, Stephen	Development of arching action in longitudinally-restrained reinforced concrete beams	7-19
Anh Tuan, Bui Le / Hwang, Chao-Lung / Lin, Kae-Long / Chen, Yuan-Yuan / Young, Mung-Pei	Development of lightweight aggregate from sewage sludge and waste glass powder for concrete	334-339
Wang, Brad Jianhe / Dai, Chunping	Development of structural laminated veneer lumber from stress graded short-rotation hem-fir veneer	902-909
Breakah, Tamer M. / Williams, R. Christopher	Dynamic testing of hot mix asphalt for moisture susceptibility assessment	636-642
Aubert, J. E. / Fabbri, A. / Morel, J. C. / Maillard, P.	An earth block with a compressive strength higher than 45MPa!	366-369
Bouharoun, Samir / De Caro, Pascale / Dubois, Isabelle / Djelal, Chafika / Vanhove, Yannick	Effect of a superplasticizer on the properties of the concrete/oil/formwork interface	1137-1144
Beglarigale, Ahsanollah / Yazɩcɩ, Halit	The effect of alkali–silica reaction on steel fiber–matrix bond characteristics of cement based mortars	845-860
Rahmani, Eisa / Darabi, Masoud K. / Abu Al-Rub, Rashid K. / Kassem, Emad / Masad, Eyad A. / Little, Dallas N.	Effect of confinement pressure on the nonlinear-viscoelastic response of asphalt concrete at high temperatures	779-788
Tastani, S. P. / Balafas, I. / Dervisis, A. / Pantazopoulou, S. J.	Effect of core compaction on deformation capacity of FRP-jacketed concrete columns	1078-1092
Mardani-Aghabaglou, Ali / Tuyan, Murat / Yılmaz, Gökhan / Arioz, Omer / Ramyar, Kambiz	Effect of different types of superplasticizer on fresh, rheological and strength properties of self-consolidating concrete	1020-1025
Tan, Yiqiu / Ouyang, Jian / Lv, Jianfu / Li, Yunliang	Effect of emulsifier on cement hydration in cement asphalt mortar	159-164
Zhang, Haiyan / Wu, Xiaowei / Cao, Dongwei / Zhang, Yanjun / He, Min	Effect of linear low density-polyethylene grafted with maleic anhydride (LLDPE-g-MAH) on properties of high density-polyethylene/styrene–butadiene–styrene (HDPE/SBS) modified asphalt	192-198
Tittarelli, Francesca / Shah, Surendra P.	Effect of low dosages of waste GRP dust on fresh and hardened properties of mortars: Part 1	1532-1538
Tittarelli, Francesca	Effect of low dosages of waste GRP dust on fresh and hardened properties of mortars: Part 2	1539-1543
Bonati, Alice / Merusi, Filippo / Bochicchio, Giovanna / Tessadri, Barbara / Polacco, Giovanni / Filippi, Sara / Giuliani, Felice	Effect of nanoclay and conventional flame retardants on asphalt mixtures fire reaction	990-1000
Bederina, M. / Makhloufi, Z. / Bounoua, A. / Bouziani, T. / Queneudec, M.	Effect of partial and total replacement of siliceous river sand with limestone crushed sand on the durability of mortars exposed to chemical solutions	146-158
Chen, Yuan-Yuan / Anh Tuan, Bui Le / Hwang, Chao-Lung	Effect of paste amount on the properties of self-consolidating concrete containing fly ash and slag	340-346
Yan, Kezhen / Zhang, Henglong / Xu, Hongbin	Effect of polyphosphoric acid on physical properties, chemical composition and morphology of bitumen	92-98
Butler, Liam / West, Jeffrey S. / Tighe, Susan L.	Effect of recycled concrete coarse aggregate from multiple sources on the hardened properties of concrete with equivalent compressive strength	1292-1301
Kang, Seok Hee / Kim, Jung Jin / Kim, Dong joo / Chung, Young-Soo	Effect of sand grain size and sand-to-cement ratio on the interfacial bond strength of steel fibers embedded in mortars	1421-1430
Güneyisi, Erhan / Gesoǧlu, Mehmet / İpek, Süleyman	Effect of steel fiber addition and aspect ratio on bond strength of cold-bonded fly ash lightweight aggregate concretes	358-365
Kocak, Yilmaz / Tascı, Eda / Kaya, Unal	The effect of using natural zeolite on the properties and hydration characteristics of blended cements	720-727
Luo, Fu Jia / He, Li / Pan, Zhu / Duan, Wen Hui / Zhao, Xiao Ling / Collins, Frank	Effect of very fine particles on workability and strength of concrete made with dune sand	131-137
Sanchez-Alonso, Elsa / Vega-Zamanillo, Angel / Calzada-Perez, Miguel Angel / Castro-Fresno, Daniel	Effect of warm additives on rutting and fatigue behaviour of asphalt mixtures	240-244
Borowicz, David T. / Bank, Lawrence C.	Effect of web reinforcement on the behavior of pultruded fiber-reinforced polymer beams subjected to concentrated loads	347-357
Zheng, Jian-Jun / Zhou, Xin-Zhu	Effective medium method for predicting the chloride diffusivity in concrete with ITZ percolation effect	1093-1098
Chaudhary, Muhammad Tariq A.	Effectiveness of Impact Echo testing in detecting flaws in prestressed concrete slabs	753-759
Shin, Myoungsu / Choi, Yoon-Young / Kim, Ick-Hyun / Lee, Kihak	Effectiveness of low-cost fiber-reinforced cement composites in hollow columns under cyclic loading	623-635
Demirdag, S.	Effects of freezing–thawing and thermal shock cycles on physical and mechanical properties of filled and unfilled travertines	1395-1401
Nguyen, Hung Viet	Effects of mixing procedures and rap sizes on stiffness distribution of hot recycled asphalt mixtures	728-742
Ranjbar, Malek Mohammad / Madandoust, Rahmat / Mousavi, S. Yasin / Yosefi, Saman	Effects of natural zeolite on the fresh and hardened properties of self-compacted concrete	806-813
Saribiyik, Mehmet / Piskin, Abdullah / Saribiyik, Ali	The effects of waste glass powder usage on polymer concrete properties	840-844
Sobhani, Jafar / Najimi, Meysam	Electrochemical impedance behavior and transport properties of silica fume contained concrete	910-918
Santilli, A. / Puente, I.	An empirical model to predict fresh concrete lateral pressure	379-388
Peyvandi, Amirpasha / Soroushian, Parviz / Balachandra, Anagi M. / Sobolev, Konstantin	Enhancement of the durability characteristics of concrete nanocomposite pipes with modified graphite nanoplatelets	111-117
Hesami, Saeid / Roshani, Hossein / Hamedi, Gholam Hossein / Azarhoosh, Alireza	Evaluate the mechanism of the effect of hydrated lime on moisture damage of warm mix asphalt	935-941
Hamidi, Moussa / Kacimi, Larbi / Cyr, Martin / Clastres, Pierre	Evaluation and improvement of pozzolanic activity of andesite for its use in eco-efficient cement	1268-1277
Hu, Shaowei / Lu, Jun / Xiao, Feipeng	Evaluation of concrete fracture procedure based on acoustic emission parameters	1249-1256
Lu, Xiaobin / Sun, Qichen / Feng, Wei / Tian, Juntao	Evaluation of dynamic modulus of elasticity of concrete using impact-echo method	231-239
Das, Prabir Kumar / Jelagin, Denis / Birgisson, Björn	Evaluation of the low temperature cracking performance of asphalt mixtures utilizing HMA fracture mechanics	594-600
Shon, Chang-Seon / Kim, Young-Su	Evaluation of West Texas natural zeolite as an alternative of ASTM Class F fly ash	389-396
Chen, Xudong / Wu, Shengxing / Zhou, Jikai	Experimental and modeling study of dynamic mechanical properties of cement paste, mortar and concrete	419-430
Milosevic, Jelena / Gago, António Sousa / Lopes, Mário / Bento, Rita	Experimental assessment of shear strength parameters on rubble stone masonry specimens	1372-1380
Zhang, Mo / Guo, Hong / El-Korchi, Tahar / Zhang, Guoping / Tao, Mingjiang	Experimental feasibility study of geopolymer as the next-generation soil stabilizer	1468-1478
Nobili, A. / Lanzoni, L. / Tarantino, A. M.	Experimental investigation and monitoring of a polypropylene-based fiber reinforced concrete road pavement	888-895
Chen, Xudong / Wu, Shengxing / Zhou, Jikai	Experimental study and analytical formulation of mechanical behavior of concrete	662-670
Aggelis, D. G. / Momoki, S. / Shiotani, T.	Experimental study of nonlinear wave parameters in mortar	1409-1413
Masi, A. / Chiauzzi, L.	An experimental study on the within-member variability of in situ concrete strength in RC building structures	951-961
Wang, Debin / Li, Hong-Nan / Li, Gang	Experimental tests on reinforced concrete columns under multi-dimensional dynamic loadings	1167-1181
Sukmak, Patimapon / Horpibulsuk, Suksun / Shen, Shui-Long / Chindaprasirt, Prinya / Suksiripattanapong, Cherdsak	Factors influencing strength development in clay–fly ash geopolymer	1125-1136
Li, Yue / Chen, Bing	Factors that affect the properties of magnesium phosphate cement	977-983
Zhang, X. B. / Aljewifi, H. / Li, J.	Failure behaviour investigation of continuous yarn reinforced cementitious composites	456-464
Baylor, G. / Harte, A. M.	Finite element modelling of castellated timber I-joists	680-688
López, Cristina / Firmo, João P. / Correia, João R. / Tiago, Carlos	Fire protection systems for reinforced concrete slabs strengthened with CFRP laminates	324-333
Pająk, M. / Ponikiewski, T.	Flexural behavior of self-compacting concrete reinforced with different types of steel fibers	397-408
Jin, Shanshan / Zhang, Jinxi / Huang, Baoshan	Fractal analysis of effect of air void on freeze–thaw resistance of concrete	126-130
Ramos, Telma / Matos, Ana Mafalda / Schmidt, Bruno / Rio, João / Sousa-Coutinho, Joana	Granitic quarry sludge waste in mortar: Effect on strength and durability	1001-1009
Radonjanin, Vlastimir / Malešev, Mirjana / Marinković, Snežana / Al Malty, Ali Emhemd Saed	Green recycled aggregate concrete	1503-1511
Labropoulos, Kyriakos / Moropoulou, Antonia	Ground penetrating radar investigation of the bell tower of the church of the Holy Sepulchre	689-700
Lu, Ye / Li, Jianchun / Ye, Lin / Wang, Dong	Guided waves for damage detection in rebar-reinforced concrete beams	370-378
Hammiche, Dalila / Boukerrou, Amar / Djidjelli, Hocine / Corre, Yves-Marie / Grohens, Yves / Pillin, Isabelle	Hydrothermal ageing of alfa fiber reinforced polyvinylchloride composites	293-300
Liu, Huajie / Bu, Yuhuan / Guo, Shenglai	Improvement of aluminium powder application measure based on influence of gas hole on strength properties of oil well cement	480-488
Sellami, A. / Merzoud, M. / Amziane, S.	Improvement of mechanical properties of green concrete by treatment of the vegetals fibers	1117-1124
Noorvand, Hassan / Abang Ali, Abang Abdullah / Demirboğa, Ramazan / Farzadnia, Nima / Noorvand, Hossein	Incorporation of nano TiO2 in black rice husk ash mortars	1350-1361
Yurtdas, I. / Chen, D. / Hu, D. W. / Shao, J. F.	Influence of alkali silica reaction (ASR) on mechanical properties of mortar	165-174
Ye, Hailong / Tian, Ye / Jin, Nanguo / Jin, Xianyu / Fu, Chuanqing	Influence of cracking on chloride diffusivity and moisture influential depth in concrete subjected to simulated environmental conditions	66-79
Vincent, Thomas / Ozbakkaloglu, Togay	Influence of fiber orientation and specimen end condition on axial compressive behavior of FRP-confined concrete	814-826
Wang, Qiang / Yan, Peiyu / Yang, Jianwei / Zhang, Bo	Influence of steel slag on mechanical properties and durability of concrete	1414-1420
Mendoza, Oscar / Sierra, Germán / Tobón, Jorge I.	Influence of super plasticizer and Ca(OH)2 on the stability of functionalized multi-walled carbon nanotubes dispersions for cement composites applications	771-778
Nejad, F. Moghadas / Arabani, M. / Hamedi, GH H. / Azarhoosh, A. R.	Influence of using polymeric aggregate treatment on moisture damage in hot mix asphalt	1523-1527
Amaro, Bárbara / Saraiva, Diogo / de Brito, Jorge / Flores-Colen, Inês	Inspection and diagnosis system of ETICS on walls	1257-1267
Modarres, Amir	Investigating the toughness and fatigue behavior of conventional and SBS modified asphalt mixes	218-222
Xie, Yanjun / Mo, Liantong / Su, Donglin / Woldekidan, M. F. / Wu, Shaopeng	Investigation into fundamental properties of bituminous plug expansion joint filling mixtures containing rubber granules	984-989
Morova, Nihat	Investigation of usability of basalt fibers in hot mix asphalt concrete	175-180
Attom, M. / Hawileh, R. / Naser, M.	Investigation on concrete compressive strength mixed with sand contaminated by crude oil products	99-103
Khiavi, Alireza Khavandi / Ameri, Mahmoud	Laboratory evaluation of strain controlled fatigue criteria in hot mix asphalt	1497-1502
Martínez-Barrera, Gonzalo / Vigueras-Santiago, Enrique / Martínez-López, Miguel / Ribeiro, Maria C. S. / Ferreira, Antonio J. M. / Brostow, Witold	Luffa fibers and gamma radiation as improvement tools of polymer concrete	86-91
Soutsos, M. N. / Turu'allo, G. / Owens, K. / Kwasny, J. / Barnett, S. J. / Basheer, P. A. M.	Maturity testing of lightweight self-compacting and vibrated concretes	118-125
Liu, Feng / Zheng, Wanhu / Li, Lijuan / Feng, Wenxian / Ning, Guofang	Mechanical and fatigue performance of rubber concrete	711-719
Ashtiani, Mohammad Soleymani / Scott, Allan N. / Dhakal, Rajesh P.	Mechanical and fresh properties of high-strength self-compacting concrete containing class C fly ash	1217-1224
Abd Elmoaty, Abd Elmoaty Mohamed	Mechanical properties and corrosion resistance of concrete modified with granite dust	743-752
Ryu, Gum Sung / Lee, Young Bok / Koh, Kyung Taek / Chung, Young Soo	The mechanical properties of fly ash-based geopolymer concrete with alkaline activators	409-418
Kolovos, K. G. / Asteris, P. G. / Cotsovos, D. M. / Badogiannis, E. / Tsivilis, S.	Mechanical properties of soilcrete mixtures modified with metakaolin	1026-1036
Rovero, L. / Fratini, F.	The Medina of Chefchaouen (Morocco): A survey on morphological and mechanical features of the masonries	465-479
Tang, S. B. / Yu, Q. L. / Li, H. / Yu, C. Y. / Bao, C. Y. / Tang, C. A.	Mesomechanical model of moisture diffusion and shrinkage cracking in building material – Model development	511-529
Sepulcre Aguilar, Alberto / Pinilla Melo, Javier / Hernández Olivares, Francisco	Microstructural analysis of aerated cement pastes with fly ash, Metakaolin and Sepiolite additions	282-292
Ma, Hongyan / Li, Zongjin	Microstructures and mechanical properties of polymer modified mortars under distinct mechanisms	579-587
Zhang, Henglong / Xu, Hongbin / Wang, Xiaoliang / Yu, Jianying	Microstructures and thermal aging mechanism of expanded vermiculite modified bitumen	919-926
Yurdakul, Murat / Akdaş, Hürriyet	Modeling uniaxial compressive strength of building stones using non-destructive test results as neural networks input parameters	1010-1019
Biscaia, Hugo C. / Chastre, Carlos / Silva, Manuel A. G.	Modelling GFRP-to-concrete joints with interface finite elements with rupture based on the Mohr-Coulomb criterion	261-273
Ohemeng, Eric Ababio / Yalley, Peter Paa-Kofi	Models for predicting the density and compressive strength of rubberized concrete pavement blocks	656-661
de Bruijn, Paulien / Johansson, Peter	Moisture fixation and thermal properties of lime–hemp concrete	1235-1242
Romano, Pedro / Brito, Paulo S. D. / Rodrigues, Luiz	Monitoring of the degradation of concrete structures in environments containing chloride ions	827-832
Ventolà, L. / Vendrell, M. / Giraldez, P.	Newly-designed traditional lime mortar with a phase change material as an additive	1210-1216
Fortino, Stefania / Genoese, Alessandra / Genoese, Andrea / Nunes, Lina / Palma, Pedro	Numerical modelling of the hygro-thermal response of timber bridges during their service life: A monitoring case-study	1225-1234
Fiore, Andrea / Porco, Francesco / Uva, Giuseppina / Mezzina, Mauro	On the dispersion of data collected by in situ diagnostic of the existing concrete	208-217
Rahmani, E. / Dehestani, M. / Beygi, M. H. A. / Allahyari, H. / Nikbin, I. M.	On the mechanical properties of concrete containing waste PET particles	1302-1308
Serrano, Susana / Barreneche, Camila / Rincón, Lídia / Boer, Dieter / Cabeza, Luisa F.	Optimization of three new compositions of stabilized rammed earth incorporating PCM: Thermal properties characterization and LCA	872-878
Binhussain, Mohammed A. / El-Tonsy, Maher M.	Palm leave and plastic waste wood composite for out-door structures	1431-1435
Alrifai, Amjad / Aggoun, Salima / Kadri, Abdelkader / Kenai, Said / Kadri, El-Hadj	Paste and mortar studies on the influence of mix design parameters on autogenous shrinkage of self-compacting concrete	969-976
Gruyaert, E. / Maes, M. / De Belie, N.	Performance of BFS concrete: k-Value concept versus equivalent performance concept	441-455
El-Chabib, Hassan / Ibrahim, Ahmed	The performance of high-strength flowable concrete made with binary, ternary, or quaternary binder in hot climate	245-253
Tan, Yiqiu / Guo, Meng / Cao, Liping / Zhang, Lei	Performance optimization of composite modified asphalt sealant based on rheological behavior	799-805
Lima, Carmine / Caggiano, Antonio / Faella, Ciro / Martinelli, Enzo / Pepe, Marco / Realfonzo, Roberto	Physical properties and mechanical behaviour of concrete made with recycled aggregates and fly ash	547-559
AL-Salami, A. E. / Morsy, M. S. / Taha, S. / Shoukry, H.	Physico-mechanical characteristics of blended white cement pastes containing thermally activated ultrafine nano clays	138-145
Anania, Laura / Badalá, Antonio / D'Agata, Giuseppe	The post strengthening of the masonry vaults by the Ω-Wrap technique based on the use of C-FRP	1053-1068
Jamil, M. / Kaish, A. B. M. A. / Raman, S. N. / Zain, M. F. M.	Pozzolanic contribution of rice husk ash in cementitious system	588-593
Posi, Patcharapol / Lertnimoolchai, Surasit / Sata, Vanchai / Chindaprasirt, Prinya	Pressed lightweight concrete containing calcined diatomite aggregate	896-901
Ryan, Paraic C. / O'Connor, Alan J.	Probabilistic analysis of the time to chloride induced corrosion for different Self-Compacting Concretes	1106-1116
Zhang, Lianyang	Production of bricks from waste materials – A review	643-655
Mirza, Jahangir / Saleh, Kaveh / Langevin, Marc-André / Mirza, Saeed / Bhutta, Muhammad Aamer Rafique / Tahir, Mahmood Md.	Properties of microfine cement grouts at 4°C, 10°C and 20°C	1145-1153
Bhutta, Muhammad Aamer Rafique / Hasanah, Nor / Farhayu, Nur / Hussin, Mohd Warid / Tahir, Mahmood bin Md / Mirza, J.	Properties of porous concrete from waste crushed concrete (recycled aggregate)	1243-1248
Chen, Can / Williams, R. Christopher / Ahmed EI., Taha / Lee, Hosin "David" / Schram, Scott	Quality control/quality assurance testing for longitudinal joint density and segregation of asphalt mixtures	80-85
Silva, Rui A. / Oliveira, Daniel V. / Miranda, Tiago / Cristelo, Nuno / Escobar, Maria C. / Soares, Edgar	Rammed earth construction with granitic residual soils: The case study of northern Portugal	181-191
Abo-El-Enein, S. A. / Heikal, Mohamed / Amin, M. S. / Negm, H. H.	Reactivity of dealuminated kaolin and burnt kaolin using cement kiln dust or hydrated lime as activators	1451-1460
Behnam, Bashar / Eamon, Christopher	Reliability-based design optimization of concrete flexural members reinforced with ductile FRP bars	942-950
Tian, Ye / Jin, Xian-Yu / Jin, Nan-guo / Zhao, Ruoyi / Li, Zong-jin / Ma, Hong-yan	Research on the microstructure formation of polyacrylate latex modified mortars	1381-1394
Kogbara, Reginald B. / Iyengar, Srinath R. / Grasley, Zachary C. / Masad, Eyad A. / Zollinger, Dan G.	A review of concrete properties at cryogenic temperatures: Towards direct LNG containment	760-770
Gholami, Mehran / Sam, Abdul Rahman Mohd / Yatim, Jamaludin Mohamad / Tahir, Mahmood Md	A review on steel/CFRP strengthening systems focusing environmental performance	301-310
Khadivar, Alireza / Kavussi, Amir	Rheological characteristics of SBR and NR polymer modified bitumen emulsions at average pavement temperatures	1099-1105
Paje, S. E. / Luong, J. / Vázquez, V. F. / Bueno, M. / Miró, R.	Road pavement rehabilitation using a binder with a high content of crumb rubber: Influence on noise reduction	789-798
Lee, N. K. / Lee, H. K.	Setting and mechanical properties of alkali-activated fly ash/slag concrete manufactured at room temperature	1201-1209
Manalo, A. C. / Aravinthan, T. / Karunasena, W.	Shear behaviour of glued structural fibre composite sandwich beams	1317-1327
Díaz de Terán, José Ramón / Turmo, José / Jorquera-Lucerga, Juan José / Barragán, Bryan E. / Ramos, Gonzalo / Aparicio, Ángel Carlos	Shear-off strength of compact reinforcement splicing for improved construction of in situ concrete structures	199-207
Yang, Keun-Hyeok / Mun, Jae-Sung / Shim, Hyun-Ju	Shrinkage of heavyweight magnetite concrete with and without fly ash	56-65
Arizio, Elena / Piazza, Rossano / Cairns, Warren R. L. / Appolonia, Lorenzo / Botteon, Alessandra	Statistical analysis on ancient mortars: A case study of the Balivi Tower in Aosta (Italy)	1309-1316
Katzer, Jacek	Strength performance comparison of mortars made with waste fine aggregate and ceramic fume	1-6
Carr, A. J. / Jauregui, D. V. / Riveiro, B. / Arias, P. / Armesto, J.	Structural evaluation of historic masonry arch bridges based on first hinge formation	569-578
Breccolotti, Marco / Materazzi, Annibale Luigi	Structural reliability of bonding between steel rebars and recycled aggregate concrete	927-934
Van Thanh, Dang / Feng, Cheng Pei	Study on Marshall and Rutting test of SMA at abnormally high temperature	1337-1341
Tan, Yiqiu / Guo, Meng	Study on the phase behavior of asphalt mastic	311-317
Wang, Hainian / Zhang, Chen / Yang, Lian / You, Zhanping	Study on the rubber-modified asphalt mixtures' cracking propagation using the extended finite element method	223-230
Yılmaz, Salih / Özen, Muhammet Ali / Yardim, Yavuz	Tensile behavior of post-installed chemical anchors embedded to low strength concrete	861-866
Teomete, Egemen / Kocyigit, Ozgun Ilkim	Tensile strain sensitivity of steel fiber reinforced cement matrix composites tested by split tensile test	962-968
Gao, Y. / Chow, W. K. / Wu, M.	Thermal performance of window glass panes in an enclosure fire	530-546
Dondi, Giulio / Pettinari, Matteo / Sangiorgi, Cesare / Zoorob, Salah E.	Traditional and Dissipated Energy approaches to compare the 2PB and 4PB flexural methodologies on a Warm Mix Asphalt	833-839
Magee, B. J. / Basheer, P. A. M. / Bai, Y. / Long, A. E. / McCarter, W. J. / Jin, W. L. / Zhao, Y. X.	UK–China Science Bridge – Sustainable solutions for the built environment	20-28
Sua-iam, Gritsada / Makul, Natt	Use of recycled alumina as fine aggregate replacement in self-compacting concrete	701-710
Poinot, Thomas / Benyahia, Kawtar / Govin, Alexandre / Jeanmaire, Thomas / Grosseau, Philippe	Use of ultrasonic degradation to study the molecular weight influence of polymeric admixtures for mortars	1046-1052
Tan, Yiqiu / Guo, Meng	Using surface free energy method to study the cohesion and adhesion of asphalt mastic	254-260
Xia, Yanqing / Yan, Yun / Hu, Zhihua	Utilization of circulating fluidized bed fly ash in preparing non-autoclaved aerated concrete production	1461-1467
Tanyildizi, Harun	Variance analysis of crack characteristics of structural lightweight concrete containing silica fume exposed to high temperature	1154-1159

Informations
sur cette fiche
IssueID
22513
Publié(e) le:
13.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - octobre 2013

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - octobre 2013

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.